* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
*
- * Copyright 2004,2006 The FreeRADIUS Server Project.
+ * Copyright 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,
+ * 2009,2010,2011,1012 The FreeRADIUS Server Project.
+ *
+ * Copyright 2012 Alan DeKok <aland@freeradius.org>
*/
#include <freeradius-devel/ident.h>
RCSID("$Id$")
-#include <freeradius-devel/radiusd.h>
-#include <freeradius-devel/modules.h>
+#include <freeradius-devel/radiusd.h>
+#include <freeradius-devel/modules.h>
#include <freeradius-devel/rad_assert.h>
-#include <pwd.h>
+#include <stdarg.h>
#include <ctype.h>
-#include <lber.h>
-#include <ldap.h>
-
-#ifndef HAVE_PTHREAD_H
-/*
- * This is a lot simpler than putting ifdef's around
- * every use of the pthread functions.
- */
-#define pthread_mutex_lock(a)
-#define pthread_mutex_trylock(a) (0)
-#define pthread_mutex_unlock(a)
-#define pthread_mutex_init(a,b)
-#define pthread_mutex_destroy(a)
-#else
-#include <pthread.h>
-#endif
-
+#include "mapping.h"
#define MAX_FILTER_STR_LEN 1024
-#define TIMELIMIT 5
-
-/*
- * These are used in case ldap_search returns LDAP_SERVER_DOWN
- * In that case we do conn->failed_conns++ and then check it:
- * If conn->failed_conns <= MAX_FAILED_CONNS_START then we try
- * to reconnect
- * conn->failed_conns is also checked on entrance in perform_search:
- * If conn->failed_conns > MAX_FAILED_CONNS_START then we don't
- * try to do anything and we just do conn->failed_conns++ and
- * return RLM_MODULE_FAIL
- * if conn->failed_conns >= MAX_FAILED_CONNS_END then we give it
- * another chance and we set it to MAX_FAILED_CONNS_RESTART and
- * try to reconnect.
- *
- *
- * We are assuming that the majority of the LDAP_SERVER_DOWN cases
- * will either be an ldap connection timeout or a temporary ldap
- * server problem.
- * As a result we make a few attempts to reconnect hoping that the problem
- * will soon go away. If it does not go away then we just return
- * RLM_MODULE_FAIL on entrance in perform_search until conn->failed_conns
- * gets to MAX_FAILED_CONNS_END. After that we give it one more chance by
- * going back to MAX_FAILED_CONNS_RESTART
- *
- */
-
-#define MAX_FAILED_CONNS_END 20
-#define MAX_FAILED_CONNS_RESTART 4
-#define MAX_FAILED_CONNS_START 5
-
-#ifdef NOVELL_UNIVERSAL_PASSWORD
-
-/* Universal Password Length */
-#define UNIVERSAL_PASS_LEN 256
-
-int nmasldap_get_password(
- LDAP *ld,
- char *objectDN,
- size_t *pwdSize, /* in bytes */
- char *pwd );
-
-#endif
-
-#ifdef NOVELL
-
-#define REQUEST_ACCEPTED 0
-#define REQUEST_CHALLENGED 1
-#define REQUEST_REJECTED 2
-#define MAX_CHALLENGE_LEN 128
-
-int radLdapXtnNMASAuth( LDAP *, char *, char *, char *, char *, size_t *, char *, int * );
-
-#endif
-
-/* linked list of mappings between RADIUS attributes and LDAP attributes */
-struct TLDAP_RADIUS {
- char* attr;
- char* radius_attr;
- FR_TOKEN operator;
- struct TLDAP_RADIUS* next;
-};
-typedef struct TLDAP_RADIUS TLDAP_RADIUS;
-
-typedef struct ldap_conn {
- LDAP *ld;
- char bound;
- char locked;
- int failed_conns;
- int uses;
-#ifdef HAVE_PTHREAD_H
- pthread_mutex_t mutex;
-#endif
-} LDAP_CONN;
typedef struct {
CONF_SECTION *cs;
+ fr_connection_pool_t *pool;
char *server;
int port;
- int timelimit;
- int max_uses;
- int net_timeout;
- int timeout;
- int debug;
- int tls_mode;
- int start_tls;
- int num_conns;
- int do_comp;
- int do_xlat;
- int default_allow;
- int failed_conns;
- int is_url;
- int chase_referrals;
- int rebind;
- int expect_password;
+
char *login;
char *password;
+
char *filter;
- char *base_filter;
char *basedn;
+
+ int chase_referrals;
+ int rebind;
+
+ int ldap_debug; /* Debug flag for LDAP SDK */
+ const char *xlat_name; /* name used to xlat */
+
+ const char *map_file;
+ TLDAP_RADIUS *check_map;
+ TLDAP_RADIUS *reply_map;
+ char **attrs;
+
+ int do_xlat;
+
+ /*
+ * Access related configuration
+ */
+ char *access_attr;
+ int positive_access_attr;
+
+ /*
+ * Profiles
+ */
+ char *base_filter;
char *default_profile;
char *profile_attr;
- char *access_attr;
- char *passwd_attr;
- char *dictionary_mapping;
+
+ /*
+ * Group checking.
+ */
char *groupname_attr;
char *groupmemb_filt;
char *groupmemb_attr;
- char **atts;
- TLDAP_RADIUS *check_item_map;
- TLDAP_RADIUS *reply_item_map;
- LDAP_CONN *conns;
-#ifdef NOVELL
- LDAP_CONN *apc_conns;
-#endif
- int ldap_debug; /* Debug flag for LDAP SDK */
- char *xlat_name; /* name used to xlat */
- char *auth_type;
+
+ /*
+ * TLS items. We should really normalize these with the
+ * TLS code in 3.0.
+ */
+ int tls_mode;
+ int start_tls;
char *tls_cacertfile;
char *tls_cacertdir;
char *tls_certfile;
char *tls_keyfile;
char *tls_randfile;
char *tls_require_cert;
-#ifdef NOVELL
- int edir_account_policy_check;
-#endif
- int set_auth_type;
+
+ /*
+ * Options
+ */
+ int timelimit;
+ int net_timeout;
+ int timeout;
+ int is_url;
/*
* For keep-alives.
/* The default setting for TLS Certificate Verification */
#define TLS_DEFAULT_VERIFY "allow"
-#if defined(LDAP_OPT_X_KEEPALIVE_IDLE) || defined(LDAP_OPT_X_KEEPALIVE_PROBES) || defined (LDAP_OPT_ERROR_NUMBER)
-static CONF_PARSER keepalive_config[] = {
-#ifdef LDAP_OPT_X_KEEPALIVE_IDLE
- {"idle", PW_TYPE_INTEGER, offsetof(ldap_instance,keepalive_idle), NULL, "60"},
-#endif
-#ifdef LDAP_OPT_X_KEEPALIVE_PROBES
- {"probes", PW_TYPE_INTEGER, offsetof(ldap_instance,keepalive_probes), NULL, "3"},
-#endif
-#ifdef LDAP_OPT_ERROR_NUMBER
- {"interval", PW_TYPE_INTEGER, offsetof(ldap_instance,keepalive_interval), NULL, "30"},
-#endif
-
- { NULL, -1, 0, NULL, NULL }
-};
-#endif /* KEEPALIVE */
-
+/*
+ * TLS Configuration
+ */
static CONF_PARSER tls_config[] = {
{"start_tls", PW_TYPE_BOOLEAN,
offsetof(ldap_instance,start_tls), NULL, "no"},
{ NULL, -1, 0, NULL, NULL }
};
-static const CONF_PARSER module_config[] = {
- {"server", PW_TYPE_STRING_PTR,
- offsetof(ldap_instance,server), NULL, "localhost"},
- {"port", PW_TYPE_INTEGER,
- offsetof(ldap_instance,port), NULL, "389"},
- {"password", PW_TYPE_STRING_PTR,
- offsetof(ldap_instance,password), NULL, ""},
- {"expect_password", PW_TYPE_BOOLEAN,
- offsetof(ldap_instance,expect_password), NULL, "yes"},
- {"identity", PW_TYPE_STRING_PTR,
- offsetof(ldap_instance,login), NULL, ""},
-
- /*
- * Timeouts & stuff.
- */
- /* wait forever on network activity */
- {"net_timeout", PW_TYPE_INTEGER,
- offsetof(ldap_instance,net_timeout), NULL, "10"},
- /* wait forever for search results */
- {"timeout", PW_TYPE_INTEGER,
- offsetof(ldap_instance,timeout), NULL, "20"},
- /* allow server unlimited time for search (server-side limit) */
- {"timelimit", PW_TYPE_INTEGER,
- offsetof(ldap_instance,timelimit), NULL, "20"},
- /* how many times the connection can be used before being re-established */
- {"max_uses", PW_TYPE_INTEGER,
- offsetof(ldap_instance,max_uses), NULL, "0"},
+static CONF_PARSER attr_config[] = {
/*
- * TLS configuration The first few are here for backwards
- * compatibility. The last is the new subsection.
+ * Access limitations
*/
- {"tls_mode", PW_TYPE_BOOLEAN | PW_TYPE_DEPRECATED,
- offsetof(ldap_instance,tls_mode), NULL, "no"},
-
- {"start_tls", PW_TYPE_BOOLEAN | PW_TYPE_DEPRECATED,
- offsetof(ldap_instance,start_tls), NULL, "no"},
- {"tls_cacertfile", PW_TYPE_FILENAME | PW_TYPE_DEPRECATED,
- offsetof(ldap_instance,tls_cacertfile), NULL, NULL},
- {"tls_cacertdir", PW_TYPE_FILENAME | PW_TYPE_DEPRECATED,
- offsetof(ldap_instance,tls_cacertdir), NULL, NULL},
- {"tls_certfile", PW_TYPE_FILENAME | PW_TYPE_DEPRECATED,
- offsetof(ldap_instance,tls_certfile), NULL, NULL},
- {"tls_keyfile", PW_TYPE_FILENAME | PW_TYPE_DEPRECATED,
- offsetof(ldap_instance,tls_keyfile), NULL, NULL},
- {"tls_randfile", PW_TYPE_STRING_PTR | PW_TYPE_DEPRECATED, /* OK if it changes on HUP */
- offsetof(ldap_instance,tls_randfile), NULL, NULL},
- {"tls_require_cert", PW_TYPE_STRING_PTR | PW_TYPE_DEPRECATED,
- offsetof(ldap_instance,tls_require_cert), NULL, TLS_DEFAULT_VERIFY},
- { "tls", PW_TYPE_SUBSECTION, 0, NULL, (const void *) tls_config },
+ /* LDAP attribute name that controls remote access */
+ {"access_attr", PW_TYPE_STRING_PTR,
+ offsetof(ldap_instance,access_attr), NULL, NULL},
+ {"positive_access_attr", PW_TYPE_BOOLEAN,
+ offsetof(ldap_instance,positive_access_attr), NULL, "yes"},
- /*
- * DN's and filters.
- */
- {"basedn", PW_TYPE_STRING_PTR,
- offsetof(ldap_instance,basedn), NULL, "o=notexist"},
- {"filter", PW_TYPE_STRING_PTR,
- offsetof(ldap_instance,filter), NULL, "(uid=%u)"},
{"base_filter", PW_TYPE_STRING_PTR,
offsetof(ldap_instance,base_filter), NULL, "(objectclass=radiusprofile)"},
{"default_profile", PW_TYPE_STRING_PTR,
{"profile_attribute", PW_TYPE_STRING_PTR,
offsetof(ldap_instance,profile_attr), NULL, NULL},
+ { NULL, -1, 0, NULL, NULL }
+};
+
+
+/*
+ * Group configuration
+ */
+static CONF_PARSER group_config[] = {
/*
- * Getting passwords from the database
+ * Group checks. These could probably be done
+ * via dynamic xlat's.
*/
- {"password_attribute", PW_TYPE_STRING_PTR,
- offsetof(ldap_instance,passwd_attr), NULL, NULL},
+ {"name_attribute", PW_TYPE_STRING_PTR,
+ offsetof(ldap_instance,groupname_attr), NULL, "cn"},
+ {"membership_filter", PW_TYPE_STRING_PTR,
+ offsetof(ldap_instance,groupmemb_filt), NULL, "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"},
+ {"membership_attribute", PW_TYPE_STRING_PTR,
+ offsetof(ldap_instance,groupmemb_attr), NULL, NULL},
+
+
+ { NULL, -1, 0, NULL, NULL }
+};
+/*
+ * Various options that don't belong in the main configuration.
+ *
+ * Note that these overlap a bit with the connection pool code!
+ */
+static CONF_PARSER option_config[] = {
/*
- * Access limitations
+ * Debugging flags to the server
*/
- /* LDAP attribute name that controls remote access */
- {"access_attr", PW_TYPE_STRING_PTR,
- offsetof(ldap_instance,access_attr), NULL, NULL},
- {"access_attr_used_for_allow", PW_TYPE_BOOLEAN,
- offsetof(ldap_instance,default_allow), NULL, "yes"},
+ {"ldap_debug", PW_TYPE_INTEGER,
+ offsetof(ldap_instance,ldap_debug), NULL, "0x0000"},
+
{"chase_referrals", PW_TYPE_BOOLEAN,
offsetof(ldap_instance,chase_referrals), NULL, NULL},
+
{"rebind", PW_TYPE_BOOLEAN,
offsetof(ldap_instance,rebind), NULL, NULL},
+ /* timeout on network activity */
+ {"net_timeout", PW_TYPE_INTEGER,
+ offsetof(ldap_instance,net_timeout), NULL, "10"},
+
+ /* timeout for search results */
+ {"timeout", PW_TYPE_INTEGER,
+ offsetof(ldap_instance,timeout), NULL, "20"},
+
+ /* allow server unlimited time for search (server-side limit) */
+ {"timelimit", PW_TYPE_INTEGER,
+ offsetof(ldap_instance,timelimit), NULL, "20"},
+
+#ifdef LDAP_OPT_X_KEEPALIVE_IDLE
+ {"idle", PW_TYPE_INTEGER, offsetof(ldap_instance,keepalive_idle), NULL, "60"},
+#endif
+#ifdef LDAP_OPT_X_KEEPALIVE_PROBES
+ {"probes", PW_TYPE_INTEGER, offsetof(ldap_instance,keepalive_probes), NULL, "3"},
+#endif
+#ifdef LDAP_OPT_ERROR_NUMBER
+ {"interval", PW_TYPE_INTEGER, offsetof(ldap_instance,keepalive_interval), NULL, "30"},
+#endif
+ { NULL, -1, 0, NULL, NULL }
+};
+
+
+static const CONF_PARSER module_config[] = {
+ {"server", PW_TYPE_STRING_PTR,
+ offsetof(ldap_instance,server), NULL, "localhost"},
+ {"port", PW_TYPE_INTEGER,
+ offsetof(ldap_instance,port), NULL, "389"},
+
+ {"password", PW_TYPE_STRING_PTR,
+ offsetof(ldap_instance,password), NULL, ""},
+ {"identity", PW_TYPE_STRING_PTR,
+ offsetof(ldap_instance,login), NULL, ""},
+
/*
- * Group checks. These could probably be done
- * via dynamic xlat's.
+ * DN's and filters.
*/
- {"groupname_attribute", PW_TYPE_STRING_PTR,
- offsetof(ldap_instance,groupname_attr), NULL, "cn"},
- {"groupmembership_filter", PW_TYPE_STRING_PTR,
- offsetof(ldap_instance,groupmemb_filt), NULL, "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"},
- {"groupmembership_attribute", PW_TYPE_STRING_PTR,
- offsetof(ldap_instance,groupmemb_attr), NULL, NULL},
+ {"basedn", PW_TYPE_STRING_PTR,
+ offsetof(ldap_instance,basedn), NULL, "o=notexist"},
+
+ {"filter", PW_TYPE_STRING_PTR,
+ offsetof(ldap_instance,filter), NULL, "(uid=%u)"},
/* file with mapping between LDAP and RADIUS attributes */
{"dictionary_mapping", PW_TYPE_FILENAME,
- offsetof(ldap_instance,dictionary_mapping), NULL, "${confdir}/ldap.attrmap"},
+ offsetof(ldap_instance, map_file), NULL, NULL},
/*
- * Debugging flags to the server
+ * Terrible things which should be deleted.
*/
- {"ldap_debug", PW_TYPE_INTEGER,
- offsetof(ldap_instance,ldap_debug), NULL, "0x0000"},
- {"ldap_connections_number", PW_TYPE_INTEGER,
- offsetof(ldap_instance,num_conns), NULL, "5"},
- {"compare_check_items", PW_TYPE_BOOLEAN,
- offsetof(ldap_instance,do_comp), NULL, "no"},
{"do_xlat", PW_TYPE_BOOLEAN,
offsetof(ldap_instance,do_xlat), NULL, "yes"},
-#ifdef NOVELL
- /*
- * Novell magic.
- */
- {"edir_account_policy_check", PW_TYPE_BOOLEAN,
- offsetof(ldap_instance,edir_account_policy_check), NULL, "yes"},
-#endif
+ { "profiles", PW_TYPE_SUBSECTION, 0, NULL, (const void *) attr_config },
- {"set_auth_type", PW_TYPE_BOOLEAN, offsetof(ldap_instance,set_auth_type), NULL, "yes"},
+ { "group", PW_TYPE_SUBSECTION, 0, NULL, (const void *) group_config },
-#if defined(LDAP_OPT_X_KEEPALIVE_IDLE) || defined(LDAP_OPT_X_KEEPALIVE_PROBES) || defined (LDAP_OPT_ERROR_NUMBER)
- { "keepalive", PW_TYPE_SUBSECTION, 0, NULL, (const void *) keepalive_config },
-#endif
+ { "options", PW_TYPE_SUBSECTION, 0, NULL, (const void *) option_config },
+
+ { "tls", PW_TYPE_SUBSECTION, 0, NULL, (const void *) tls_config },
+
+ { "profiles", PW_TYPE_SUBSECTION, 0, NULL, (const void *) attr_config },
{NULL, -1, 0, NULL, NULL}
};
-#define ld_valid ld_options.ldo_valid
-#define LDAP_VALID_SESSION 0x2
-#define LDAP_VALID(ld) ( (ld)->ld_valid == LDAP_VALID_SESSION )
+typedef struct ldap_conn {
+ LDAP *ld;
+ int rebound;
+ int referred;
+ ldap_instance *inst;
+} LDAP_CONN;
+
-#ifdef FIELDCPY
-static void fieldcpy(char *, char **);
-#endif
-static VALUE_PAIR *ldap_pairget(LDAP *, LDAPMessage *, TLDAP_RADIUS *,VALUE_PAIR **,int, ldap_instance *);
-static int ldap_groupcmp(void *, REQUEST *, VALUE_PAIR *, VALUE_PAIR *, VALUE_PAIR *, VALUE_PAIR **);
-static size_t ldap_xlat(void *, REQUEST *, const char *, char *, size_t);
-static LDAP *ldap_connect(void *instance, const char *, const char *, int, int *, char **);
-static int read_mappings(ldap_instance* inst);
-
-static inline int ldap_get_conn(LDAP_CONN *conns,LDAP_CONN **ret,
- ldap_instance *inst)
+#if LDAP_SET_REBIND_PROC_ARGS == 3
+/*
+ * Rebind && chase referral stuff
+ */
+static int ldap_rebind(LDAP *ld, LDAP_CONST char *url,
+ UNUSED ber_tag_t request, UNUSED ber_int_t msgid,
+ void *ctx )
{
- register int i = 0;
-
- for(i=0;i<inst->num_conns;i++){
- DEBUG(" [%s] ldap_get_conn: Checking Id: %d",
- inst->xlat_name, i);
- if ((pthread_mutex_trylock(&conns[i].mutex) == 0)) {
- if (conns[i].locked == 1) {
- /* connection is already being used */
- pthread_mutex_unlock(&(conns[i].mutex));
- continue;
- }
- /* found an unused connection */
- *ret = &conns[i];
- conns[i].uses++;
- conns[i].locked = 1;
- DEBUG(" [%s] ldap_get_conn: Got Id: %d",
- inst->xlat_name, i);
- return i;
- }
- }
+ LDAP_CONN *conn = ctx;
+
+ conn->referred = TRUE;
+ conn->rebound = TRUE; /* not really, but oh well... */
+ rad_assert(ld == conn->ld);
- return -1;
+ DEBUG(" [%s] rebind to URL %s", conn->inst->xlat_name, url);
+ return ldap_bind_s(ld, conn->inst->login, conn->inst->password,
+ LDAP_AUTH_SIMPLE);
}
+#endif
-static inline void ldap_release_conn(int i, ldap_instance *inst)
-
+static int ldap_bind_wrapper(LDAP_CONN **pconn, const char *user,
+ const char *password,
+ const char **perror_str, int do_rebind)
{
- LDAP_CONN *conns = inst->conns;
+ int rcode, ldap_errno;
+ int module_rcode = RLM_MODULE_FAIL;
+ int reconnect = FALSE;
+ const char *error_string;
+ LDAP_CONN *conn = *pconn;
+ ldap_instance *inst = conn->inst;
+ LDAPMessage *result = NULL;
+ struct timeval tv;
- DEBUG(" [%s] ldap_release_conn: Release Id: %d", inst->xlat_name, i);
- if ((inst->max_uses > 0) && (conns[i].uses >= inst->max_uses)) {
- if (conns[i].ld){
- DEBUG(" [%s] ldap_release_conn: Hit max usage limit, closing Id: %d", inst->xlat_name, i);
- ldap_unbind_s(conns[i].ld);
-
- conns[i].ld = NULL;
+redo:
+ ldap_errno = ldap_bind(conn->ld, user, password, LDAP_AUTH_SIMPLE);
+ if (ldap_errno < 0) {
+ get_error:
+ ldap_get_option(conn->ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
+ error_string = ldap_err2string(ldap_errno);
+
+ if (do_rebind && !reconnect) {
+ conn = fr_connection_reconnect(inst->pool, conn);
+ *pconn = conn;
+ if (!conn) return RLM_MODULE_FAIL;
+ goto redo;
}
- conns[i].bound = 0;
- conns[i].uses = 0;
- }
- conns[i].locked = 0;
- pthread_mutex_unlock(&(conns[i].mutex));
-}
-#ifdef NOVELL
-static inline void ldap_release_apc_conn(int i, ldap_instance *inst)
-
-{
- LDAP_CONN *conns = inst->apc_conns;
+ print_error:
+ if (perror_str) *perror_str = error_string;
- DEBUG(" [%s] ldap_release_conn: Release Id: %d", inst->xlat_name, i);
- conns[i].locked = 0;
- pthread_mutex_unlock(&(conns[i].mutex));
-}
+#ifdef HAVE_LDAP_INITIALIZE
+ if (inst->is_url) {
+ radlog(L_ERR, " [%s] %s bind to %s failed: %s",
+ inst->xlat_name, user,
+ inst->server, error_string);
+ } else
#endif
+ {
+ radlog(L_ERR, " [%s] %s bind to %s:%d failed: %s",
+ inst->xlat_name, user,
+ inst->server, inst->port,
+ error_string);
+ }
-/*************************************************************************
- *
- * Function: rlm_ldap_instantiate
- *
- * Purpose: Uses section of radiusd config file passed as parameter
- * to create an instance of the module.
- *
- *************************************************************************/
-static int
-ldap_instantiate(CONF_SECTION * conf, void **instance)
-{
- ldap_instance *inst;
- int i = 0;
- int atts_num = 0;
- int reply_map_num = 0;
- int check_map_num = 0;
- int att_map[3] = {0,0,0};
- TLDAP_RADIUS *pair;
- ATTR_FLAGS flags;
- const char *xlat_name;
-
- inst = rad_malloc(sizeof *inst);
- if (!inst) {
- return -1;
+ return module_rcode; /* caller closes the connection */
}
- memset(inst, 0, sizeof(*inst));
- inst->chase_referrals = 2; /* use OpenLDAP defaults */
- inst->rebind = 2;
- inst->cs = conf;
- if (cf_section_parse(conf, inst, module_config) < 0) {
- free(inst);
- return -1;
- }
+ DEBUG3(" [%s] waiting for bind result ...", inst->xlat_name);
- if (inst->server == NULL) {
- radlog(L_ERR, "rlm_ldap: missing 'server' directive.");
- free(inst); /* FIXME: detach */
- return -1;
- }
- inst->is_url = 0;
- if (ldap_is_ldap_url(inst->server)){
-#ifdef HAVE_LDAP_INITIALIZE
- inst->is_url = 1;
- inst->port = 0;
-#else
- radlog(L_ERR, "rlm_ldap: 'server' directive is in URL form but ldap_initialize() is not available.");
- free(inst); /* FIXME: detach */
- return -1;
-#endif
+ tv.tv_sec = inst->timeout;
+ tv.tv_usec = 0;
+ rcode = ldap_result(conn->ld, ldap_errno, 1, &tv, &result);
+ if (rcode < 0) goto get_error;
+
+ if (rcode == 0) {
+ error_string = "timeout";
+ goto print_error;
}
- /* workaround for servers which support LDAPS but not START TLS */
- if(inst->port == LDAPS_PORT || inst->tls_mode)
- inst->tls_mode = LDAP_OPT_X_TLS_HARD;
- else
- inst->tls_mode = 0;
- inst->reply_item_map = NULL;
- inst->check_item_map = NULL;
- inst->conns = NULL;
- inst->failed_conns = 0;
+ ldap_errno = ldap_result2error(conn->ld, result, 1);
+ switch (ldap_errno) {
+ case LDAP_SUCCESS:
+ break;
-#if LDAP_SET_REBIND_PROC_ARGS != 3
- /*
- * The 2-argument rebind doesn't take an instance
- * variable. Our rebind function needs the instance
- * variable for the username, password, etc.
- */
- if (inst->rebind == 1) {
- radlog(L_ERR, "rlm_ldap: Cannot use 'rebind' directive as this version of libldap does not support the API that we need.");
- free(inst);
- return -1;
+ case LDAP_INVALID_CREDENTIALS:
+ case LDAP_CONSTRAINT_VIOLATION:
+ rcode = RLM_MODULE_REJECT;
+ /* FALL-THROUGH */
+
+ default:
+ goto get_error;
}
-#endif
- DEBUG("rlm_ldap: Registering ldap_groupcmp for Ldap-Group");
- paircompare_register(PW_LDAP_GROUP, PW_USER_NAME, ldap_groupcmp, inst);
- memset(&flags, 0, sizeof(flags));
+ return RLM_MODULE_OK;
+}
- xlat_name = cf_section_name2(conf);
- if (xlat_name != NULL){
- char *group_name;
- DICT_ATTR *dattr;
+/*************************************************************************
+ *
+ * Function: ldap_conn_create
+ *
+ * Purpose: Create and return a new connection
+ * This function is probably too big.
+ *
+ *************************************************************************/
+static void *ldap_conn_create(void *ctx)
+{
+ int module_rcode;
+ int ldap_errno, ldap_version;
+ struct timeval tv;
+ ldap_instance *inst = ctx;
+ LDAP *ld = NULL;
+ LDAP_CONN *conn = NULL;
+ const char *error;
- /*
- * Allocate room for <instance>-Ldap-Group
- */
- group_name = rad_malloc((strlen(xlat_name) + 1 + 11) * sizeof(char));
- sprintf(group_name,"%s-Ldap-Group",xlat_name);
- DEBUG("rlm_ldap: Creating new attribute %s",group_name);
- dict_addattr(group_name, -1, 0, PW_TYPE_STRING, flags);
- dattr = dict_attrbyname(group_name);
- if (dattr == NULL){
- radlog(L_ERR, "rlm_ldap: Failed to create attribute %s",group_name);
- free(group_name);
- free(inst); /* FIXME: detach */
- return -1;
- }
- DEBUG("rlm_ldap: Registering ldap_groupcmp for %s",group_name);
- paircompare_register(dattr->attr, PW_USER_NAME, ldap_groupcmp, inst);
- free(group_name);
- }
- else {
- xlat_name = cf_section_name1(conf);
- rad_assert(xlat_name != NULL); /* or all hell breaks loose */
- }
- inst->xlat_name = strdup(xlat_name);
- DEBUG("rlm_ldap: Registering ldap_xlat with xlat_name %s",xlat_name);
- xlat_register(xlat_name,ldap_xlat,inst);
+#ifdef HAVE_LDAP_INITIALIZE
+ if (inst->is_url) {
+ DEBUG(" [%s] Connect to %s", inst->xlat_name, inst->server);
- /*
- * Over-ride set_auth_type if there's no Auth-Type of our name.
- * This automagically catches the case where LDAP is listed
- * in "authorize", but not "authenticate".
- */
- if (inst->set_auth_type) {
- DICT_VALUE *dv = dict_valbyname(PW_AUTH_TYPE, 0, xlat_name);
+ ldap_errno = ldap_initialize(&ld, inst->server);
- /*
- * No section of *my* name, but maybe there's an
- * LDAP section...
- */
- if (!dv) dv = dict_valbyname(PW_AUTH_TYPE, 0, "LDAP");
- if (!dv) {
- DEBUG2("rlm_ldap: Over-riding set_auth_type, as there is no module %s listed in the \"authenticate\" section.", xlat_name);
- inst->set_auth_type = 0;
- } else {
- inst->auth_type = dv->name; /* doesn't change on HUP */
+ if (ldap_errno != LDAP_SUCCESS) {
+ radlog(L_ERR, " [%s] ldap_initialize() failed: %s",
+ inst->xlat_name, ldap_err2string(ldap_errno));
+ goto conn_fail;
}
- } /* else no need to look up the value */
+ } else
+#endif
+ {
+ DEBUG(" [%s] Connect to %s:%d", inst->xlat_name,
+ inst->server, inst->port);
-#ifdef NOVELL
- /*
- * (LDAP_Instance, V1) attribute-value pair in the config
- * items list means that the 'authorize' method of the
- * instance 'V1' of the LDAP module has processed this
- * request.
- */
- dict_addattr("LDAP-Instance", -1, 0, PW_TYPE_STRING, flags);
+ ld = ldap_init(inst->server, inst->port);
+ if (!ld) {
+ radlog(L_ERR, " [%s] ldap_init() failed", inst->xlat_name);
+ conn_fail:
+ if (ld) ldap_unbind_s(ld);
+ return NULL;
+ }
+ }
/*
- * ('eDir-APC', '1') in config items list
- * Do not perform eDirectory account policy check (APC)
- *
- * ('eDir-APC', '2') in config items list
- * Perform eDirectory APC
+ * We now have a connection structure, but no actual TCP connection.
*
- * ('eDir-APC', '3') in config items list
- * eDirectory APC has been completed
+ * Set a bunch of LDAP options, using common code.
*/
- dict_addattr("eDir-APC", -1, 0, PW_TYPE_STRING, flags);
- /*
- * eDir-Auth-Option allows for a different NMAS Authentication method to be used instead of password
- */
- dict_addattr("eDir-Auth-Option", -1, 0, PW_TYPE_STRING, flags);
-#endif
- if (inst->num_conns <= 0){
- radlog(L_ERR, "rlm_ldap: Invalid ldap connections number passed.");
- free(inst); /* FIXME: detach */
- return -1;
+#define do_ldap_option(_option, _name, _value) if (ldap_set_option(ld, _option, _value) != LDAP_OPT_SUCCESS) { \
+ ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno); \
+ radlog(L_ERR, " [%s] Could not set %s: %s", inst->xlat_name, _name, ldap_err2string(ldap_errno)); \
}
- inst->conns = malloc(sizeof(*(inst->conns))*inst->num_conns);
- if (inst->conns == NULL){
- radlog(L_ERR, "rlm_ldap: Could not allocate memory. Aborting.");
- free(inst); /* FIXME: detach */
- return -1;
- }
- for(i = 0; i < inst->num_conns; i++){
- inst->conns[i].bound = 0;
- inst->conns[i].locked = 0;
- inst->conns[i].failed_conns = 0;
- inst->conns[i].ld = NULL;
- pthread_mutex_init(&inst->conns[i].mutex, NULL);
+
+ if (inst->ldap_debug) {
+ do_ldap_option(LDAP_OPT_DEBUG_LEVEL, "ldap_debug", &(inst->ldap_debug));
}
-#ifdef NOVELL
/*
- * 'inst->apc_conns' is a separate connection pool to be
- * used for performing eDirectory account policy check in
- * the 'postauth' method. This avoids changing the
- * (RADIUS server) credentials associated with the
- * 'inst->conns' connection pool.
+ * Leave "chase_referrals" unset to use the OpenLDAP
+ * default.
*/
- inst->apc_conns = malloc(sizeof(*(inst->apc_conns))*inst->num_conns);
- if (inst->apc_conns == NULL){
- radlog(L_ERR, "rlm_ldap: Could not allocate memory. Aborting.");
- free(inst); /* FIXME: detach */
- return -1;
- }
- for(i = 0; i < inst->num_conns; i++){
- inst->apc_conns[i].bound = 0;
- inst->apc_conns[i].locked = 0;
- inst->apc_conns[i].failed_conns = 0;
- inst->apc_conns[i].ld = NULL;
- pthread_mutex_init(&inst->apc_conns[i].mutex, NULL);
- }
-#endif
-
- if (read_mappings(inst) != 0) {
- radlog(L_ERR, "rlm_ldap: Reading dictionary mappings from file %s failed",
- inst->dictionary_mapping);
- free(inst); /* FIXME: detach */
- return -1;
- }
- if ((inst->check_item_map == NULL) &&
- (inst->reply_item_map == NULL)) {
- radlog(L_ERR, "rlm_ldap: dictionary mappings file %s did not contain any mappings",
- inst->dictionary_mapping);
- free(inst); /* FIXME: detach */
- return -1;
- }
-
- pair = inst->check_item_map;
- while(pair != NULL){
- atts_num++;
- pair = pair->next;
- }
- check_map_num = (atts_num - 1);
- pair = inst->reply_item_map;
- while(pair != NULL){
- atts_num++;
- pair = pair->next;
- }
- reply_map_num = (atts_num - 1);
- if (inst->profile_attr)
- atts_num++;
- if (inst->passwd_attr)
- atts_num++;
- if (inst->access_attr)
- atts_num++;
-#ifdef NOVELL
- atts_num++; /* eDirectory Authentication Option attribute */
-#endif
- inst->atts = (char **)malloc(sizeof(char *)*(atts_num + 1));
- if (inst->atts == NULL){
- radlog(L_ERR, "rlm_ldap: Could not allocate memory. Aborting.");
- free(inst); /* FIXME: detach */
- return -1;
- }
- pair = inst->check_item_map;
- if (pair == NULL)
- pair = inst->reply_item_map;
-#ifdef NOVELL
- for(i=0;i<atts_num - 1;i++){
-#else
- for(i=0;i<atts_num;i++){
-#endif
- if (i <= check_map_num ){
- inst->atts[i] = pair->attr;
- if (i == check_map_num)
- pair = inst->reply_item_map;
- else
- pair = pair->next;
- }
- else if (i <= reply_map_num){
- inst->atts[i] = pair->attr;
- pair = pair->next;
- }
- else{
- if (inst->profile_attr && !att_map[0]){
- inst->atts[i] = inst->profile_attr;
- att_map[0] = 1;
- }
- else if (inst->passwd_attr && !att_map[1]){
- inst->atts[i] = inst->passwd_attr;
- att_map[1] = 1;
- }
- else if (inst->access_attr && !att_map[2]){
- inst->atts[i] = inst->access_attr;
- att_map[2] = 1;
+ if (inst->chase_referrals != 2) {
+ if (inst->chase_referrals) {
+ do_ldap_option(LDAP_OPT_REFERRALS, "chase_referrals", LDAP_OPT_ON);
+
+#if LDAP_SET_REBIND_PROC_ARGS == 3
+ if (inst->rebind == 1) {
+ ldap_set_rebind_proc(ld, ldap_rebind, inst);
}
+#endif
+ } else {
+ do_ldap_option(LDAP_OPT_REFERRALS, "chase_referrals", LDAP_OPT_OFF);
}
}
-#ifdef NOVELL
- {
- static char ts[] = "sasdefaultloginsequence";
- inst->atts[atts_num - 1] = ts;
- }
-#endif
- inst->atts[atts_num] = NULL;
-
- DEBUG("conns: %p",inst->conns);
- *instance = inst;
+ tv.tv_sec = inst->net_timeout;
+ tv.tv_usec = 0;
+ do_ldap_option(LDAP_OPT_NETWORK_TIMEOUT, "net_timeout", &tv);
+ do_ldap_option(LDAP_OPT_TIMELIMIT, "timelimit", &(inst->timelimit));
- return 0;
-}
+ ldap_version = LDAP_VERSION3;
+ do_ldap_option(LDAP_OPT_PROTOCOL_VERSION, "ldap_version", &ldap_version);
+#ifdef LDAP_OPT_X_KEEPALIVE_IDLE
+ do_ldap_option(LDAP_OPT_X_KEEPALIVE_IDLE, "keepalive idle", &(inst->keepalive_idle));
+#endif
-/*
- * read_mappings(...) reads a ldap<->radius mappings file to
- * inst->reply_item_map and inst->check_item_map
- */
-#define MAX_LINE_LEN 160
-#define GENERIC_ATTRIBUTE_ID "$GENERIC$"
+#ifdef LDAP_OPT_X_KEEPALIVE_PROBES
+ do_ldap_option(LDAP_OPT_X_KEEPALIVE_PROBES, "keepalive probes", &(inst->keepalive_probes));
+#endif
-static int
-read_mappings(ldap_instance* inst)
-{
- FILE* mapfile;
- char *filename;
+#ifdef LDAP_OPT_X_KEEPALIVE_INTERVAL
+ do_ldap_option(LDAP_OPT_X_KEEPALIVE_INTERVAL, "keepalive interval", &(inst->keepalive_interval));
+#endif
+#ifdef HAVE_LDAP_START_TLS
/*
- * All buffers are of MAX_LINE_LEN so we can use sscanf
- * without being afraid of buffer overflows
+ * Set all of the TLS options
*/
- char buf[MAX_LINE_LEN], itemType[MAX_LINE_LEN];
- char radiusAttribute[MAX_LINE_LEN], ldapAttribute[MAX_LINE_LEN];
- int linenumber;
- FR_TOKEN operator;
- char opstring[MAX_LINE_LEN];
+ if (inst->tls_mode) {
+ do_ldap_option(LDAP_OPT_X_TLS, "tls_mode", &(inst->tls_mode));
+ }
- /* open the mappings file for reading */
+#define maybe_ldap_option(_option, _name, _value) if (_value) do_ldap_option(_option, _name, _value)
- filename = inst->dictionary_mapping;
- DEBUG("rlm_ldap: reading ldap<->radius mappings from file %s", filename);
- mapfile = fopen(filename, "r");
+ maybe_ldap_option(LDAP_OPT_X_TLS_CACERTFILE,
+ "cacertfile", inst->tls_cacertfile);
+ maybe_ldap_option(LDAP_OPT_X_TLS_CACERTDIR,
+ "cacertdir", inst->tls_cacertdir);
- if (mapfile == NULL) {
- radlog(L_ERR, "rlm_ldap: Opening file %s failed: %s",
- filename, strerror(errno));
- return -1; /* error */
+#ifdef HAVE_LDAP_INT_TLS_CONFIG
+ if (ldap_int_tls_config(NULL, LDAP_OPT_X_TLS_REQUIRE_CERT,
+ (inst->tls_require_cert)) != LDAP_OPT_SUCCESS) {
+ ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
+ radlog(L_ERR, " [%s] could not set ",
+ "LDAP_OPT_X_TLS_REQUIRE_CERT option to %s: %s",
+ inst->xlat_name,
+ inst->tls_require_cert,
+ ldap_err2string(ldap_errno));
}
+#endif
+
+ maybe_ldap_option(LDAP_OPT_X_TLS_CERTFILE,
+ "certfile", inst->tls_certfile);
+ maybe_ldap_option(LDAP_OPT_X_TLS_KEYFILE,
+ "keyfile", inst->tls_keyfile);
+ maybe_ldap_option(LDAP_OPT_X_TLS_RANDOM_FILE,
+ "randfile", inst->tls_randfile);
/*
- * read file line by line. Note that if line length
- * exceeds MAX_LINE_LEN, line numbers will be mixed up
+ * And finally start the TLS code.
*/
- linenumber = 0;
-
- while (fgets(buf, sizeof buf, mapfile)!=NULL) {
- char* ptr;
- int token_count;
- TLDAP_RADIUS* pair;
-
- linenumber++;
+ if (inst->start_tls && (inst->port != 636)) {
+ ldap_errno = ldap_start_tls_s(ld, NULL, NULL);
+ if (ldap_errno != LDAP_SUCCESS) {
+ ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER,
+ &ldap_errno);
+ radlog(L_ERR, " [%s] could not start TLS: %s",
+ inst->xlat_name,
+ ldap_err2string(ldap_errno));
+ goto conn_fail;
+ }
+ }
+#endif /* HAVE_LDAP_START_TLS */
- /* strip comments */
- ptr = strchr(buf, '#');
- if (ptr) *ptr = 0;
+ conn = rad_malloc(sizeof(*conn));
+ conn->inst = inst;
+ conn->ld = ld;
+ conn->rebound = FALSE;
+ conn->referred = FALSE;
- /* empty line */
- if (buf[0] == 0) continue;
+ module_rcode = ldap_bind_wrapper(&conn, inst->login, inst->password,
+ &error, FALSE);
+ if (module_rcode != RLM_MODULE_OK) {
+ radlog(L_ERR, " [%s] Failed binding to LDAP server: %s",
+ inst->xlat_name, error);
- /* extract tokens from the string */
- token_count = sscanf(buf, "%s %s %s %s",
- itemType, radiusAttribute,
- ldapAttribute, opstring);
+ /*
+ * FIXME: print "check config, morians!
+ */
+ goto conn_fail;
+ }
- if (token_count <= 0) /* no tokens */
- continue;
+ return conn;
+}
- if ((token_count < 3) || (token_count > 4)) {
- radlog(L_ERR, "rlm_ldap: Skipping %s line %i: %s",
- filename, linenumber, buf);
- radlog(L_ERR, "rlm_ldap: Expected 3 to 4 tokens "
- "(Item type, RADIUS Attribute and LDAP Attribute) but found only %i", token_count);
- continue;
- }
- if (token_count == 3) {
- operator = T_OP_INVALID; /* use defaults */
- } else {
- ptr = opstring;
- operator = gettoken((void*)&ptr, buf, sizeof(buf));
- if ((operator < T_OP_ADD) || (operator > T_OP_CMP_EQ)) {
- radlog(L_ERR, "rlm_ldap: file %s: skipping line %i: unknown or invalid operator %s",
- filename, linenumber, opstring);
- continue;
- }
- }
+/*************************************************************************
+ *
+ * Function: ldap_conn_delete
+ *
+ * Purpose: Close and delete a connection
+ *
+ *************************************************************************/
+static int ldap_conn_delete(UNUSED void *ctx, void *connection)
+{
+ LDAP_CONN *conn = connection;
- /* create new TLDAP_RADIUS list node */
- pair = rad_malloc(sizeof(*pair));
+ ldap_unbind_s(conn->ld);
+ free(conn);
- pair->attr = strdup(ldapAttribute);
- pair->radius_attr = strdup(radiusAttribute);
- pair->operator = operator;
+ return 0;
+}
- if ( (pair->attr == NULL) || (pair->radius_attr == NULL) ) {
- radlog(L_ERR, "rlm_ldap: Out of memory");
- if (pair->attr) free(pair->attr);
- if (pair->radius_attr) free(pair->radius_attr);
- free(pair);
- fclose(mapfile);
- return -1;
- }
- /* push node to correct list */
- if (strcasecmp(itemType, "checkItem") == 0) {
- pair->next = inst->check_item_map;
- inst->check_item_map = pair;
- } else if (strcasecmp(itemType, "replyItem") == 0) {
- pair->next = inst->reply_item_map;
- inst->reply_item_map = pair;
- } else {
- radlog(L_ERR, "rlm_ldap: file %s: skipping line %i: unknown itemType %s",
- filename, linenumber, itemType);
- free(pair->attr);
- free(pair->radius_attr);
- free(pair);
- continue;
- }
+/*************************************************************************
+ *
+ * Function: ldap_get_socket
+ *
+ * Purpose: Gets an LDAP socket from the connection pool
+ *
+ *************************************************************************/
+static LDAP_CONN *ldap_get_socket(ldap_instance *inst)
+{
+ LDAP_CONN *conn;
- DEBUG("rlm_ldap: LDAP %s mapped to RADIUS %s",
- pair->attr, pair->radius_attr);
+ conn = fr_connection_get(inst->pool);
+ if (!conn) {
+ radlog(L_ERR, " [%s] All ldap connections are in use",
+ inst->xlat_name);
+ return NULL;
}
- fclose(mapfile);
-
- return 0; /* success */
+ return conn;
}
-static int perform_search(void *instance, LDAP_CONN *conn,
- char *search_basedn, int scope, char *filter,
- char **attrs, LDAPMessage ** result)
+/*************************************************************************
+ *
+ * Function: ldap_release_socket
+ *
+ * Purpose: Frees an LDAP socket back to the connection pool
+ *
+ *************************************************************************/
+static void ldap_release_socket(ldap_instance *inst, LDAP_CONN *conn)
{
- int res = RLM_MODULE_OK;
- int ldap_errno = 0;
- ldap_instance *inst = instance;
- int search_retry = 0;
- struct timeval tv;
-
- *result = NULL;
-
- if (!conn){
- radlog(L_ERR, " [%s] NULL connection handle passed",
- inst->xlat_name);
- return RLM_MODULE_FAIL;
- }
- if (conn->failed_conns > MAX_FAILED_CONNS_START){
- conn->failed_conns++;
- if (conn->failed_conns >= MAX_FAILED_CONNS_END){
- conn->failed_conns = MAX_FAILED_CONNS_RESTART;
- conn->bound = 0;
- }
- }
-retry:
- if (!conn->bound || conn->ld == NULL) {
- DEBUG2(" [%s] attempting LDAP reconnection", inst->xlat_name);
- if (conn->ld){
- DEBUG2(" [%s] closing existing LDAP connection",
- inst->xlat_name);
- ldap_unbind_s(conn->ld);
- }
- if ((conn->ld = ldap_connect(instance, inst->login,
- inst->password, 0, &res, NULL)) == NULL) {
- radlog(L_ERR, " [%s] (re)connection attempt failed",
- inst->xlat_name);
- if (search_retry == 0)
- conn->failed_conns++;
- return (RLM_MODULE_FAIL);
- }
- conn->bound = 1;
- conn->failed_conns = 0;
- }
-
- tv.tv_sec = inst->timeout;
- tv.tv_usec = 0;
- DEBUG2(" [%s] performing search in %s, with filter %s", inst->xlat_name,
- search_basedn ? search_basedn : "(null)" , filter);
- switch (ldap_search_st(conn->ld, search_basedn, scope, filter,
- attrs, 0, &tv, result)) {
- case LDAP_SUCCESS:
- case LDAP_NO_SUCH_OBJECT:
- break;
- case LDAP_SERVER_DOWN:
- radlog(L_ERR, " [%s] ldap_search() failed: LDAP connection lost.", inst->xlat_name);
- conn->failed_conns++;
- if (search_retry == 0){
- if (conn->failed_conns <= MAX_FAILED_CONNS_START){
- radlog(L_INFO, " [%s] Attempting reconnect", inst->xlat_name);
- search_retry = 1;
- conn->bound = 0;
- ldap_msgfree(*result);
- goto retry;
- }
- }
- ldap_msgfree(*result);
- return RLM_MODULE_FAIL;
- case LDAP_INSUFFICIENT_ACCESS:
- radlog(L_ERR, " [%s] ldap_search() failed: Insufficient access. Check the identity and password configuration directives.", inst->xlat_name);
- ldap_msgfree(*result);
- return RLM_MODULE_FAIL;
- case LDAP_TIMEOUT:
- exec_trigger(NULL, inst->cs, "modules.ldap.timeout", TRUE);
- radlog(L_ERR, " [%s] ldap_search() failed: Timed out while waiting for server to respond. Please increase the timeout.", inst->xlat_name);
- ldap_msgfree(*result);
- return RLM_MODULE_FAIL;
- case LDAP_FILTER_ERROR:
- radlog(L_ERR, " [%s] ldap_search() failed: Bad search filter: %s", inst->xlat_name,filter);
- ldap_msgfree(*result);
- return RLM_MODULE_FAIL;
- case LDAP_TIMELIMIT_EXCEEDED:
- exec_trigger(NULL, inst->cs, "modules.ldap.timeout", TRUE);
+ /*
+ * Could have already been free'd due to a previous error.
+ */
+ if (!conn) return;
- case LDAP_BUSY:
- case LDAP_UNAVAILABLE:
- /* We don't need to reconnect in these cases so we don't set conn->bound */
- ldap_get_option(conn->ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] ldap_search() failed: %s", inst->xlat_name,
- ldap_err2string(ldap_errno));
- ldap_msgfree(*result);
- return (RLM_MODULE_FAIL);
- default:
- ldap_get_option(conn->ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] ldap_search() failed: %s", inst->xlat_name,
- ldap_err2string(ldap_errno));
- conn->bound = 0;
- ldap_msgfree(*result);
- return (RLM_MODULE_FAIL);
+ /*
+ * We chased a referral to another server.
+ *
+ * This connection is no longer part of the pool which is
+ * connected to and bound to the configured server.
+ * Close it.
+ *
+ * Note that we do NOT close it if it was bound to
+ * another user. Instead, we let the next caller do the
+ * rebind.
+ */
+ if (conn->referred) {
+ fr_connection_del(inst->pool, conn);
+ return;
}
- ldap_errno = ldap_count_entries(conn->ld, *result);
- if (ldap_errno != 1) {
- if (ldap_errno == 0) {
- DEBUG(" [%s] object not found", inst->xlat_name);
- } else {
- DEBUG(" [%s] got ambiguous search result (%d results)", inst->xlat_name, ldap_errno);
- }
- res = RLM_MODULE_NOTFOUND;
- ldap_msgfree(*result);
- }
- return res;
+ fr_connection_release(inst->pool, conn);
+ return;
}
-/*
- * Translate the LDAP queries.
- */
-static size_t ldap_escape_func(UNUSED REQUEST *request, char *out, size_t outlen, const char *in, void *arg)
+/*************************************************************************
+ *
+ * Function: ldap_escape_func
+ *
+ * Purpose: Converts "bad" strings into ones which are safe for LDAP
+ *
+ *************************************************************************/
+static size_t ldap_escape_func(char *out, size_t outlen, const char *in)
{
- ldap_instance *inst = arg;
size_t len = 0;
while (in[0]) {
return len;
}
-/*
- * ldap_groupcmp(). Implement the Ldap-Group == "group" filter
- */
-static int ldap_groupcmp(void *instance, REQUEST *req,
- UNUSED VALUE_PAIR *request, VALUE_PAIR *check,
- UNUSED VALUE_PAIR *check_pairs,
- UNUSED VALUE_PAIR **reply_pairs)
+/*************************************************************************
+ *
+ * Function: perform_search
+ *
+ * Purpose: Do a search and get a response
+ *
+ *************************************************************************/
+static int perform_search(ldap_instance *inst, LDAP_CONN **pconn,
+ char *search_basedn, int scope, char *filter,
+ char **attrs, LDAPMessage **presult)
{
- char filter[MAX_FILTER_STR_LEN];
- char gr_filter[MAX_FILTER_STR_LEN];
- int res;
- LDAPMessage *result = NULL;
- LDAPMessage *msg = NULL;
- char basedn[MAX_FILTER_STR_LEN];
- static char firstattr[] = "dn";
- char *attrs[] = {firstattr,NULL};
- char **vals;
- ldap_instance *inst = instance;
- char *group_attrs[] = {inst->groupmemb_attr,NULL};
- LDAP_CONN *conn;
- int conn_id = -1;
- VALUE_PAIR *vp_user_dn;
- VALUE_PAIR **request_pairs;
-
- request_pairs = &req->config_items;
+ int ldap_errno;
+ int reconnect = FALSE;
+ LDAP_CONN *conn = *pconn;
+ struct timeval tv;
- DEBUG(" [%s] Entering ldap_groupcmp()", inst->xlat_name);
+ *presult = NULL;
- if (check->vp_strvalue == NULL || check->length == 0){
- DEBUG("rlm_ldap::ldap_groupcmp: Illegal group name");
- return 1;
- }
+ /*
+ * Do all searches as the default admin user.
+ */
+ if (conn->rebound) {
+ ldap_errno = ldap_bind_wrapper(pconn,
+ inst->login, inst->password,
+ NULL, TRUE);
+ if (ldap_errno != RLM_MODULE_OK) {
+ return -1;
+ }
- if (req == NULL){
- DEBUG("rlm_ldap::ldap_groupcmp: NULL request");
- return 1;
- }
+ rad_assert(*pconn != NULL);
+ conn = *pconn;
+ conn->rebound = FALSE;
+ }
- if (!radius_xlat(basedn, sizeof(basedn), inst->basedn, req, ldap_escape_func, inst)) {
- DEBUG("rlm_ldap::ldap_groupcmp: unable to create basedn.");
- return 1;
- }
+ tv.tv_sec = inst->timeout;
+ tv.tv_usec = 0;
+ DEBUG2(" [%s] Performing search in '%s' with filter '%s'", inst->xlat_name,
+ search_basedn ? search_basedn : "(null)" , filter);
- while((vp_user_dn = pairfind(*request_pairs, PW_LDAP_USERDN, 0)) == NULL){
- char *user_dn = NULL;
+retry:
+ ldap_errno = ldap_search_st(conn->ld, search_basedn, scope, filter,
+ attrs, 0, &tv, presult);
+ switch (ldap_errno) {
+ case LDAP_SUCCESS:
+ case LDAP_NO_SUCH_OBJECT:
+ break;
- if (!radius_xlat(filter, sizeof(filter), inst->filter,
- req, ldap_escape_func, inst)){
- DEBUG("rlm_ldap::ldap_groupcmp: unable to create filter");
- return 1;
- }
- if ((conn_id = ldap_get_conn(inst->conns,&conn,inst)) == -1){
- radlog(L_ERR, " [%s] All ldap connections are in use", inst->xlat_name);
- return 1;
- }
- if ((res = perform_search(inst, conn, basedn, LDAP_SCOPE_SUBTREE,
- filter, attrs, &result)) != RLM_MODULE_OK){
- DEBUG("rlm_ldap::ldap_groupcmp: search failed");
- ldap_release_conn(conn_id,inst);
- return 1;
- }
- if ((msg = ldap_first_entry(conn->ld, result)) == NULL) {
- DEBUG("rlm_ldap::ldap_groupcmp: ldap_first_entry() failed");
- ldap_release_conn(conn_id,inst);
- ldap_msgfree(result);
- return 1;
- }
- if ((user_dn = ldap_get_dn(conn->ld, msg)) == NULL) {
- DEBUG("rlm_ldap:ldap_groupcmp:: ldap_get_dn() failed");
- ldap_release_conn(conn_id,inst);
- ldap_msgfree(result);
- return 1;
- }
- ldap_release_conn(conn_id,inst);
-
- /*
- * Adding new attribute containing DN for LDAP
- * object associated with given username
- */
- pairadd(request_pairs, pairmake("Ldap-UserDn", user_dn,
- T_OP_EQ));
- ldap_memfree(user_dn);
- ldap_msgfree(result);
- }
+ case LDAP_SERVER_DOWN:
+ do_reconnect:
+ ldap_msgfree(*presult);
- if(!radius_xlat(gr_filter, sizeof(gr_filter),
- inst->groupmemb_filt, req, ldap_escape_func, inst)) {
- DEBUG("rlm_ldap::ldap_groupcmp: unable to create filter.");
- return 1;
- }
+ if (reconnect) return -1;
+ reconnect = TRUE;
- if (strchr((char *)check->vp_strvalue,',') != NULL) {
- /* This looks like a DN */
- strlcpy(filter, gr_filter, sizeof(filter));
- strlcpy(basedn, check->vp_strvalue, sizeof(basedn));
- } else
- snprintf(filter,sizeof(filter), "(&(%s=%s)%s)",
- inst->groupname_attr,
- (char *)check->vp_strvalue,gr_filter);
+ conn = fr_connection_reconnect(inst->pool, conn);
+ *pconn = conn; /* tell the caller we have a new connection */
+ if (!conn) return -1;
+ goto retry;
- if ((conn_id = ldap_get_conn(inst->conns,&conn,inst)) == -1) {
- radlog(L_ERR, " [%s] All ldap connections are in use", inst->xlat_name);
- return 1;
- }
+ case LDAP_INSUFFICIENT_ACCESS:
+ radlog(L_ERR, " [%s] ldap_search() failed: Insufficient access. Check the identity and password configuration directives.", inst->xlat_name);
+ ldap_msgfree(*presult);
+ return -1;
- if ((res = perform_search(inst, conn, basedn, LDAP_SCOPE_SUBTREE,
- filter, attrs, &result)) == RLM_MODULE_OK) {
- DEBUG("rlm_ldap::ldap_groupcmp: User found in group %s",
- (char *)check->vp_strvalue);
- ldap_msgfree(result);
- ldap_release_conn(conn_id,inst);
- return 0;
- }
+ case LDAP_TIMEOUT:
+ exec_trigger(NULL, inst->cs, "modules.ldap.timeout", TRUE);
+ radlog(L_ERR, " [%s] ldap_search() failed: Timed out while waiting for server to respond. Please increase the timeout.", inst->xlat_name);
+ ldap_msgfree(*presult);
+ return -1;
- ldap_release_conn(conn_id,inst);
+ case LDAP_FILTER_ERROR:
+ radlog(L_ERR, " [%s] ldap_search() failed: Bad search filter: %s", inst->xlat_name,filter);
+ ldap_msgfree(*presult);
+ return -1;
- if (res != RLM_MODULE_NOTFOUND ) {
- DEBUG("rlm_ldap::ldap_groupcmp: Search returned error");
- return 1;
- }
+ case LDAP_TIMELIMIT_EXCEEDED:
+ exec_trigger(NULL, inst->cs, "modules.ldap.timeout", TRUE);
- if (inst->groupmemb_attr == NULL){
+ case LDAP_BUSY:
+ case LDAP_UNAVAILABLE:
/*
- * Search returned NOTFOUND and searching for
- * membership using user object attributes is not
- * specified in config file
+ * Reconnect. There's an issue with the socket
+ * or LDAP server.
*/
- DEBUG("rlm_ldap::ldap_groupcmp: Group %s not found or user is not a member.",(char *)check->vp_strvalue);
- return 1;
- }
+ ldap_get_option(conn->ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
+ radlog(L_ERR, " [%s] ldap_search() failed: %s", inst->xlat_name,
+ ldap_err2string(ldap_errno));
+ goto do_reconnect;
- snprintf(filter,sizeof(filter), "(objectclass=*)");
- if ((conn_id = ldap_get_conn(inst->conns,&conn,inst)) == -1){
- radlog(L_ERR, " [%s] Add ldap connections are in use", inst->xlat_name);
- return 1;
- }
- if ((res = perform_search(inst, conn, vp_user_dn->vp_strvalue,
- LDAP_SCOPE_BASE, filter, group_attrs,
- &result)) != RLM_MODULE_OK) {
- DEBUG("rlm_ldap::ldap_groupcmp: Search returned error");
- ldap_release_conn(conn_id, inst);
- return 1;
+ default:
+ ldap_get_option(conn->ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
+ radlog(L_ERR, " [%s] ldap_search() failed: %s", inst->xlat_name,
+ ldap_err2string(ldap_errno));
+ ldap_msgfree(*presult);
+ return -1;
}
- if ((msg = ldap_first_entry(conn->ld, result)) == NULL) {
- DEBUG("rlm_ldap::ldap_groupcmp: ldap_first_entry() failed");
- ldap_release_conn(conn_id,inst);
- ldap_msgfree(result);
- return 1;
- }
- if ((vals = ldap_get_values(conn->ld, msg,
- inst->groupmemb_attr)) != NULL) {
- int i = 0;
- char found = 0;
-
- for (;i < ldap_count_values(vals);i++){
- if (strchr(vals[i],',') != NULL){
- /* This looks like a DN */
- LDAPMessage *gr_result = NULL;
- snprintf(filter,sizeof(filter), "(%s=%s)",
- inst->groupname_attr,
- (char *)check->vp_strvalue);
- if ((res = perform_search(inst, conn, vals[i],
- LDAP_SCOPE_BASE, filter,
- attrs, &gr_result)) != RLM_MODULE_OK){
- if (res != RLM_MODULE_NOTFOUND) {
- DEBUG("rlm_ldap::ldap_groupcmp: Search returned error");
- ldap_value_free(vals);
- ldap_msgfree(result);
- ldap_release_conn(conn_id,inst);
- return 1;
- }
- } else {
- ldap_msgfree(gr_result);
- found = 1;
- break;
- }
- } else {
- if (strcmp(vals[i],(char *)check->vp_strvalue) == 0){
- found = 1;
- break;
- }
- }
- }
- ldap_value_free(vals);
- ldap_msgfree(result);
- if (found == 0){
- DEBUG("rlm_ldap::groupcmp: Group %s not found or user not a member",
- (char *)check->vp_strvalue);
- ldap_release_conn(conn_id,inst);
- return 1;
- }
- } else {
- DEBUG("rlm_ldap::ldap_groupcmp: ldap_get_values() failed");
- ldap_msgfree(result);
- ldap_release_conn(conn_id,inst);
- return 1;
+ ldap_errno = ldap_count_entries(conn->ld, *presult);
+ if (ldap_errno == 0) {
+ ldap_msgfree(*presult);
+ DEBUG(" [%s] object not found", inst->xlat_name);
+ return -2;
}
- DEBUG("rlm_ldap::ldap_groupcmp: User found in group %s",(char *)check->vp_strvalue);
- ldap_release_conn(conn_id,inst);
+ if (ldap_errno != 1) {
+ ldap_msgfree(*presult);
+ DEBUG(" [%s] got ambiguous search result (%d results)", inst->xlat_name, ldap_errno);
+ return -2;
+ }
- return 0;
+ return 0;
}
-/*
- * ldap_xlat()
- * Do an xlat on an LDAP URL
- */
+/*************************************************************************
+ *
+ * Function: ldap_xlat
+ *
+ * Purpose: Expand an LDAP URL into a query, and return a string
+ * result from that query.
+ *
+ *************************************************************************/
static size_t ldap_xlat(void *instance, REQUEST *request, const char *fmt,
- char *out, size_t freespace)
+ char *out, size_t freespace, RADIUS_ESCAPE_STRING func)
{
- char url[MAX_FILTER_STR_LEN];
- int res;
- size_t ret = 0;
+ int rcode;
+ size_t length = 0;
ldap_instance *inst = instance;
LDAPURLDesc *ldap_url;
LDAPMessage *result = NULL;
LDAPMessage *msg = NULL;
char **vals;
- int conn_id = -1;
LDAP_CONN *conn;
+ const char *url;
+ char buffer[MAX_FILTER_STR_LEN];
- DEBUG(" [%s] - ldap_xlat", inst->xlat_name);
- if (!radius_xlat(url, sizeof(url), fmt, request, ldap_escape_func, inst)) {
- radlog (L_ERR, " [%s] Unable to create LDAP URL.\n", inst->xlat_name);
- return 0;
- }
- if (!ldap_is_ldap_url(url)){
- radlog (L_ERR, " [%s] String passed does not look like an LDAP URL.\n", inst->xlat_name);
- return 0;
- }
- if (ldap_url_parse(url,&ldap_url)){
- radlog (L_ERR, " [%s] LDAP URL parse failed.\n", inst->xlat_name);
- return 0;
- }
- if (ldap_url->lud_attrs == NULL || ldap_url->lud_attrs[0] == NULL ||
- ( ldap_url->lud_attrs[1] != NULL ||
- ( !*ldap_url->lud_attrs[0] ||
- ! strcmp(ldap_url->lud_attrs[0],"*") ) ) ){
- radlog (L_ERR, " [%s] Invalid Attribute(s) request.\n", inst->xlat_name);
- ldap_free_urldesc(ldap_url);
- return 0;
- }
- if (ldap_url->lud_host){
- if (strncmp(inst->server,ldap_url->lud_host,
- strlen(inst->server)) != 0 ||
- ldap_url->lud_port != inst->port) {
- DEBUG(" [%s] Requested server/port is not known to this module instance.", inst->xlat_name);
- ldap_free_urldesc(ldap_url);
- return 0;
- }
- }
- if ((conn_id = ldap_get_conn(inst->conns,&conn,inst)) == -1){
- radlog(L_ERR, " [%s] All ldap connections are in use", inst->xlat_name);
- ldap_free_urldesc(ldap_url);
- return 0;
- }
- if ((res = perform_search(inst, conn, ldap_url->lud_dn, ldap_url->lud_scope, ldap_url->lud_filter, ldap_url->lud_attrs, &result)) != RLM_MODULE_OK){
- if (res == RLM_MODULE_NOTFOUND){
- DEBUG(" [%s] Search returned not found", inst->xlat_name);
- ldap_free_urldesc(ldap_url);
- ldap_release_conn(conn_id,inst);
+ if (strchr(fmt, '%') != NULL) {
+ if (!radius_xlat(buffer, sizeof(buffer), fmt, request, func)) {
+ radlog (L_ERR, " [%s] Unable to create LDAP URL.", inst->xlat_name);
return 0;
}
- DEBUG(" [%s] Search returned error", inst->xlat_name);
- ldap_free_urldesc(ldap_url);
- ldap_release_conn(conn_id,inst);
- return 0;
+ url = buffer;
+ } else {
+ url = fmt;
}
- if ((msg = ldap_first_entry(conn->ld, result)) == NULL){
- DEBUG(" [%s] ldap_first_entry() failed", inst->xlat_name);
- ldap_msgfree(result);
- ldap_free_urldesc(ldap_url);
- ldap_release_conn(conn_id,inst);
+
+ if (!ldap_is_ldap_url(url)) {
+ radlog (L_ERR, " [%s] String passed does not look like an LDAP URL.",
+ inst->xlat_name);
return 0;
}
- if ((vals = ldap_get_values(conn->ld, msg, ldap_url->lud_attrs[0])) != NULL) {
- ret = strlen(vals[0]);
- if (ret >= freespace){
- DEBUG(" [%s] Insufficient string space", inst->xlat_name);
- ldap_free_urldesc(ldap_url);
- ldap_value_free(vals);
- ldap_msgfree(result);
- ldap_release_conn(conn_id,inst);
- return 0;
- }
- DEBUG(" [%s] Adding attribute %s, value: %s", inst->xlat_name,ldap_url->lud_attrs[0],vals[0]);
- strlcpy(out,vals[0],freespace);
- ldap_value_free(vals);
- }
- else
- ret = 0;
-
- ldap_msgfree(result);
- ldap_free_urldesc(ldap_url);
- ldap_release_conn(conn_id,inst);
-
- DEBUG(" [%s] - ldap_xlat end", inst->xlat_name);
-
- return ret;
-}
-
-
-/*
- * For auto-header discovery.
- */
-static const FR_NAME_NUMBER header_names[] = {
- { "{clear}", PW_CLEARTEXT_PASSWORD },
- { "{cleartext}", PW_CLEARTEXT_PASSWORD },
- { "{md5}", PW_MD5_PASSWORD },
- { "{BASE64_MD5}", PW_MD5_PASSWORD },
- { "{smd5}", PW_SMD5_PASSWORD },
- { "{crypt}", PW_CRYPT_PASSWORD },
- { "{sha}", PW_SHA_PASSWORD },
- { "{ssha}", PW_SSHA_PASSWORD },
- { "{nt}", PW_NT_PASSWORD },
- { "{ns-mta-md5}", PW_NS_MTA_MD5_PASSWORD },
- { NULL, 0 }
-};
-
-/******************************************************************************
- *
- * Function: rlm_ldap_authorize
- *
- * Purpose: Check if user is authorized for remote access
- *
- ******************************************************************************/
-static int ldap_authorize(void *instance, REQUEST * request)
-{
- LDAPMessage *result = NULL;
- LDAPMessage *msg = NULL;
- LDAPMessage *def_msg = NULL;
- LDAPMessage *def_attr_msg = NULL;
- LDAPMessage *def_result = NULL;
- LDAPMessage *def_attr_result = NULL;
- ldap_instance *inst = instance;
- char *user_dn = NULL;
- char filter[MAX_FILTER_STR_LEN];
- char basedn[MAX_FILTER_STR_LEN];
- VALUE_PAIR *check_tmp;
- VALUE_PAIR *reply_tmp;
- int res;
- VALUE_PAIR **check_pairs, **reply_pairs;
- char **vals;
- VALUE_PAIR *module_fmsg_vp;
- VALUE_PAIR *user_profile;
- char module_fmsg[MAX_STRING_LEN];
- LDAP_CONN *conn;
- int conn_id = -1;
- int added_known_password = 0;
-
- if (!request->username){
- RDEBUG2("Attribute \"User-Name\" is required for authorization.\n");
- return RLM_MODULE_NOOP;
+ if (ldap_url_parse(url, &ldap_url)){
+ radlog (L_ERR, " [%s] LDAP URL parse failed.", inst->xlat_name);
+ return 0;
}
- check_pairs = &request->config_items;
- reply_pairs = &request->reply->vps;
-
/*
- * Check for valid input, zero length names not permitted
+ * Nothing, empty string, "*" string, or got 2 things, die.
*/
- if (request->username->vp_strvalue == 0) {
- DEBUG2("zero length username not permitted\n");
- return RLM_MODULE_INVALID;
+ if (!ldap_url->lud_attrs || !ldap_url->lud_attrs[0] ||
+ !*ldap_url->lud_attrs[0] || (strcmp(ldap_url->lud_attrs[0], "*") == 0) ||
+ ldap_url->lud_attrs[1]) {
+ radlog (L_ERR, " [%s] Invalid Attribute(s) request.",
+ inst->xlat_name);
+ goto free_urldesc;
}
- RDEBUG("performing user authorization for %s",
- request->username->vp_strvalue);
- if (!radius_xlat(filter, sizeof(filter), inst->filter,
- request, ldap_escape_func, inst)) {
- radlog(L_ERR, " [%s] unable to create filter.\n", inst->xlat_name);
- return RLM_MODULE_INVALID;
+ if (ldap_url->lud_host &&
+ ((strncmp(inst->server, ldap_url->lud_host, strlen(inst->server)) != 0) ||
+ (ldap_url->lud_port != inst->port))) {
+ DEBUG(" [%s] Requested server/port is .", inst->xlat_name);
+ goto free_urldesc;
}
- if (!radius_xlat(basedn, sizeof(basedn), inst->basedn,
- request, ldap_escape_func, inst)) {
- radlog(L_ERR, " [%s] unable to create basedn.\n", inst->xlat_name);
- return RLM_MODULE_INVALID;
- }
+ conn = ldap_get_socket(inst);
+ if (!conn) goto free_urldesc;
- if ((conn_id = ldap_get_conn(inst->conns,&conn,inst)) == -1){
- radlog(L_ERR, " [%s] All ldap connections are in use", inst->xlat_name);
- return RLM_MODULE_FAIL;
- }
- if ((res = perform_search(instance, conn, basedn, LDAP_SCOPE_SUBTREE, filter, inst->atts, &result)) != RLM_MODULE_OK) {
- RDEBUG("search failed");
- if (res == RLM_MODULE_NOTFOUND){
- snprintf(module_fmsg,sizeof(module_fmsg)," [%s] User not found", inst->xlat_name);
- module_fmsg_vp = pairmake("Module-Failure-Message", module_fmsg, T_OP_EQ);
- pairadd(&request->packet->vps, module_fmsg_vp);
+ rcode = perform_search(inst, &conn, ldap_url->lud_dn, ldap_url->lud_scope,
+ ldap_url->lud_filter, ldap_url->lud_attrs, &result);
+ if (rcode < 0) {
+ if (rcode == -2) {
+ DEBUG(" [%s] Search returned not found", inst->xlat_name);
+ goto free_socket;
}
- ldap_release_conn(conn_id,inst);
- return (res);
+ DEBUG(" [%s] Search returned error", inst->xlat_name);
+ goto free_socket;
}
- if ((msg = ldap_first_entry(conn->ld, result)) == NULL) {
- RDEBUG("ldap_first_entry() failed");
- ldap_msgfree(result);
- ldap_release_conn(conn_id,inst);
- return RLM_MODULE_FAIL;
+
+ msg = ldap_first_entry(conn->ld, result);
+ if (!msg) {
+ DEBUG(" [%s] ldap_first_entry() failed", inst->xlat_name);
+ goto free_result;
}
- if ((user_dn = ldap_get_dn(conn->ld, msg)) == NULL) {
- RDEBUG("ldap_get_dn() failed");
- ldap_msgfree(result);
- ldap_release_conn(conn_id,inst);
- return RLM_MODULE_FAIL;
+
+ vals = ldap_get_values(conn->ld, msg, ldap_url->lud_attrs[0]);
+ if (!vals) {
+ DEBUG(" [%s] ldap_get_values failed", inst->xlat_name);
+ goto free_result;
}
- /*
- * Adding new attribute containing DN for LDAP object associated with
- * given username
- */
- pairadd(check_pairs, pairmake("Ldap-UserDn", user_dn, T_OP_EQ));
- ldap_memfree(user_dn);
+ length = strlen(vals[0]);
+ if (length >= freespace){
- /* Remote access is controled by attribute of the user object */
- if (inst->access_attr) {
- if ((vals = ldap_get_values(conn->ld, msg, inst->access_attr)) != NULL) {
- if (inst->default_allow){
- RDEBUG("checking if remote access for %s is allowed by %s", request->username->vp_strvalue, inst->access_attr);
- if (!strncmp(vals[0], "FALSE", 5)) {
- RDEBUG("dialup access disabled");
- snprintf(module_fmsg,sizeof(module_fmsg)," [%s] Access Attribute denies access", inst->xlat_name);
- module_fmsg_vp = pairmake("Module-Failure-Message", module_fmsg, T_OP_EQ);
- pairadd(&request->packet->vps, module_fmsg_vp);
- ldap_msgfree(result);
- ldap_value_free(vals);
- ldap_release_conn(conn_id,inst);
- return RLM_MODULE_USERLOCK;
- }
- ldap_value_free(vals);
- }
- else{
- RDEBUG("%s attribute exists - access denied by default", inst->access_attr);
- snprintf(module_fmsg,sizeof(module_fmsg)," [%s] Access Attribute denies access", inst->xlat_name);
- module_fmsg_vp = pairmake("Module-Failure-Message", module_fmsg, T_OP_EQ);
- pairadd(&request->packet->vps, module_fmsg_vp);
- ldap_msgfree(result);
- ldap_value_free(vals);
- ldap_release_conn(conn_id,inst);
- return RLM_MODULE_USERLOCK;
- }
- } else {
- if (inst->default_allow){
- RDEBUG("no %s attribute - access denied by default", inst->access_attr);
- snprintf(module_fmsg,sizeof(module_fmsg)," [%s] Access Attribute denies access", inst->xlat_name);
- module_fmsg_vp = pairmake("Module-Failure-Message", module_fmsg, T_OP_EQ);
- pairadd(&request->packet->vps, module_fmsg_vp);
- ldap_msgfree(result);
- ldap_release_conn(conn_id,inst);
- return RLM_MODULE_USERLOCK;
- }
- }
+ goto free_vals;
}
- /*
- * Check for the default profile entry. If it exists then add the
- * attributes it contains in the check and reply pairs
- */
-
- user_profile = pairfind(request->config_items, PW_USER_PROFILE, 0);
- if (inst->default_profile || user_profile){
- char *profile = inst->default_profile;
+ strlcpy(out, vals[0], freespace);
- strlcpy(filter,inst->base_filter,sizeof(filter));
- if (user_profile)
- profile = user_profile->vp_strvalue;
- if (profile && *profile){
- if ((res = perform_search(instance, conn,
- profile, LDAP_SCOPE_BASE,
- filter, inst->atts, &def_result)) == RLM_MODULE_OK){
- if ((def_msg = ldap_first_entry(conn->ld,def_result))){
- if ((check_tmp = ldap_pairget(conn->ld,def_msg,inst->check_item_map,check_pairs,1, inst))) {
- if (inst->do_xlat){
- pairxlatmove(request, check_pairs, &check_tmp);
- pairfree(&check_tmp);
- }
- else
- pairadd(check_pairs,check_tmp);
- }
- if ((reply_tmp = ldap_pairget(conn->ld,def_msg,inst->reply_item_map,reply_pairs,0, inst))) {
- if (inst->do_xlat){
- pairxlatmove(request, reply_pairs, &reply_tmp);
- pairfree(&reply_tmp);
- }
- else
- pairadd(reply_pairs,reply_tmp);
- }
- }
- ldap_msgfree(def_result);
- } else
- RDEBUG("default_profile/user-profile search failed");
- }
- }
+free_vals:
+ ldap_value_free(vals);
+free_result:
+ ldap_msgfree(result);
+free_socket:
+ ldap_release_socket(inst, conn);
+free_urldesc:
+ ldap_free_urldesc(ldap_url);
- /*
- * Check for the profile attribute. If it exists, we assume that it
- * contains the DN of an entry containg a profile for the user. That
- * way we can have different general profiles for various user groups
- * (students,faculty,staff etc)
- */
+ return length;
+}
- if (inst->profile_attr){
- if ((vals = ldap_get_values(conn->ld, msg, inst->profile_attr)) != NULL) {
- unsigned int i=0;
- strlcpy(filter,inst->base_filter,sizeof(filter));
- while(vals[i] && *vals[i]){
- if ((res = perform_search(instance, conn,
- vals[i], LDAP_SCOPE_BASE,
- filter, inst->atts, &def_attr_result)) == RLM_MODULE_OK){
- if ((def_attr_msg = ldap_first_entry(conn->ld,def_attr_result))){
- if ((check_tmp = ldap_pairget(conn->ld,def_attr_msg,inst->check_item_map,check_pairs,1, inst))) {
- if (inst->do_xlat){
- pairxlatmove(request, check_pairs, &check_tmp);
- pairfree(&check_tmp);
- }
- else
- pairadd(check_pairs,check_tmp);
- }
- if ((reply_tmp = ldap_pairget(conn->ld,def_attr_msg,inst->reply_item_map,reply_pairs,0, inst))) {
- if (inst->do_xlat){
- pairxlatmove(request, reply_pairs, &reply_tmp);
- pairfree(&reply_tmp);
- }
- else
- pairadd(reply_pairs,reply_tmp);
- }
- }
- ldap_msgfree(def_attr_result);
- } else
- RDEBUG("profile_attribute search failed");
- i++;
- }
- ldap_value_free(vals);
- }
- }
- if (inst->passwd_attr && *inst->passwd_attr) {
-#ifdef NOVELL_UNIVERSAL_PASSWORD
- if (strcasecmp(inst->passwd_attr,"nspmPassword") != 0) {
-#endif
- VALUE_PAIR *passwd_item;
- char **passwd_vals;
- char *value = NULL;
- int i;
- /*
- * Read the password from the DB, and
- * add it to the request.
- */
- passwd_vals = ldap_get_values(conn->ld,msg,
- inst->passwd_attr);
+static char *get_userdn(LDAP_CONN **pconn, REQUEST *request, int *module_rcode)
+{
+ int rcode;
+ VALUE_PAIR *vp;
+ ldap_instance *inst = (*pconn)->inst;
+ LDAPMessage *result, *msg;
+ static char firstattr[] = "uid";
+ char *user_dn, *attrs[] = {firstattr, NULL};
+ char filter[MAX_FILTER_STR_LEN];
+ char basedn[MAX_FILTER_STR_LEN];
- /*
- * Loop over what we received, and parse it.
- */
- if (passwd_vals) for (i = 0;
- passwd_vals[i] != NULL;
- i++) {
- int attr = PW_USER_PASSWORD;
-
- if (!*passwd_vals[i])
- continue;
-
- value = passwd_vals[i];
- if (!value) continue;
-
- passwd_item = radius_paircreate(request,
- &request->config_items,
- attr, 0,
- PW_TYPE_STRING);
- strlcpy(passwd_item->vp_strvalue, value,
- sizeof(passwd_item->vp_strvalue));
- passwd_item->length = strlen(passwd_item->vp_strvalue);
- RDEBUG("Added %s = %s in check items",
- passwd_item->name,
- passwd_item->vp_strvalue);
- added_known_password = 1;
- }
- ldap_value_free(passwd_vals);
-#ifdef NOVELL_UNIVERSAL_PASSWORD
- }
- else{
- /*
- * Read Universal Password from eDirectory
- */
- VALUE_PAIR *passwd_item;
- VALUE_PAIR *vp_user_dn;
- char *universal_password = NULL;
- size_t universal_password_len = UNIVERSAL_PASS_LEN;
- char *passwd_val = NULL;
-
- res = 0;
-
- if ((passwd_item = pairfind(request->config_items, PW_CLEARTEXT_PASSWORD, 0)) == NULL){
-
- universal_password = rad_malloc(universal_password_len);
- memset(universal_password, 0, universal_password_len);
-
- vp_user_dn = pairfind(request->config_items,PW_LDAP_USERDN, 0);
- res = nmasldap_get_password(conn->ld,vp_user_dn->vp_strvalue,&universal_password_len,universal_password);
-
- if (res == 0){
- passwd_val = universal_password;
- if (passwd_val){
- passwd_item = radius_paircreate(request, &request->config_items, PW_CLEARTEXT_PASSWORD, 0, PW_TYPE_STRING);
- strlcpy(passwd_item->vp_strvalue,passwd_val,sizeof(passwd_item->vp_strvalue));
- passwd_item->length = strlen(passwd_item->vp_strvalue);
- added_known_password = 1;
-
-#ifdef NOVELL
- {
- DICT_ATTR *dattr;
- VALUE_PAIR *vp_inst, *vp_apc;
- int inst_attr, apc_attr;
-
- dattr = dict_attrbyname("LDAP-Instance");
- inst_attr = dattr->attr;
- dattr = dict_attrbyname("eDir-APC");
- apc_attr = dattr->attr;
-
- vp_inst = pairfind(request->config_items, inst_attr, 0);
- if(vp_inst == NULL){
- /*
- * The authorize method of no other LDAP module instance has
- * processed this request.
- */
- vp_inst = radius_paircreate(request, &request->config_items, inst_attr, 0, PW_TYPE_STRING);
- strlcpy(vp_inst->vp_strvalue, inst->xlat_name, sizeof(vp_inst->vp_strvalue));
- vp_inst->length = strlen(vp_inst->vp_strvalue);
-
- /*
- * Inform the authenticate / post-auth method about the presence
- * of UP in the config items list and whether eDirectory account
- * policy check is to be performed or not.
- */
- vp_apc = radius_paircreate(request, &request->config_items, apc_attr, 0, PW_TYPE_STRING);
- if(!inst->edir_account_policy_check){
- /* Do nothing */
- strcpy(vp_apc->vp_strvalue, "1");
- }else{
- /* Perform eDirectory account-policy check */
- strcpy(vp_apc->vp_strvalue, "2");
- }
- vp_apc->length = 1;
- }
- }
-#endif
+ *module_rcode = RLM_MODULE_FAIL;
- RDEBUG("Added the eDirectory password %s in check items as %s",passwd_item->vp_strvalue,passwd_item->name);
- }
- }
- else {
- RDEBUG("Error reading Universal Password.Return Code = %d",res);
- }
+ vp = pairfind(request->config_items, PW_LDAP_USERDN, 0);
+ if (vp) return vp->vp_strvalue;
- memset(universal_password, 0, universal_password_len);
- free(universal_password);
- }
- }
-#endif
+ if (!radius_xlat(filter, sizeof(filter), inst->filter,
+ request, ldap_escape_func)) {
+ radlog(L_ERR, " [%s] unable to create filter.", inst->xlat_name);
+ *module_rcode = RLM_MODULE_INVALID;
+ return NULL;
}
-#ifdef NOVELL
- {
- VALUE_PAIR *vp_auth_opt;
- DICT_ATTR *dattr;
- char **auth_option;
- int auth_opt_attr;
-
- dattr = dict_attrbyname("eDir-Auth-Option");
- auth_opt_attr = dattr->attr;
- if(pairfind(*check_pairs, auth_opt_attr, 0) == NULL){
- if ((auth_option = ldap_get_values(conn->ld, msg, "sasDefaultLoginSequence")) != NULL) {
- if ((vp_auth_opt = paircreate(auth_opt_attr, 0, PW_TYPE_STRING)) == NULL){
- radlog(L_ERR, " [%s] Could not allocate memory. Aborting.", inst->xlat_name);
- ldap_msgfree(result);
- ldap_release_conn(conn_id, inst);
- }
- strcpy(vp_auth_opt->vp_strvalue, auth_option[0]);
- vp_auth_opt->length = strlen(auth_option[0]);
- pairadd(&request->config_items, vp_auth_opt);
- }else{
- RDEBUG("No default NMAS login sequence");
- }
- }
+ if (!radius_xlat(basedn, sizeof(basedn), inst->basedn,
+ request, ldap_escape_func)) {
+ radlog(L_ERR, " [%s] unable to create basedn.", inst->xlat_name);
+ *module_rcode = RLM_MODULE_INVALID;
+ return NULL;
}
-#endif
- RDEBUG("looking for check items in directory...");
-
- if ((check_tmp = ldap_pairget(conn->ld, msg, inst->check_item_map,check_pairs,1, inst)) != NULL) {
- if (inst->do_xlat){
- pairxlatmove(request, check_pairs, &check_tmp);
- pairfree(&check_tmp);
+ rcode = perform_search(inst, pconn, basedn, LDAP_SCOPE_SUBTREE,
+ filter, attrs, &result);
+ if (rcode < 0) {
+ if (rcode == -2) {
+ *module_rcode = RLM_MODULE_NOTFOUND;
}
- else
- pairadd(check_pairs,check_tmp);
- }
-
-
- RDEBUG("looking for reply items in directory...");
-
- if ((reply_tmp = ldap_pairget(conn->ld, msg, inst->reply_item_map,reply_pairs,0, inst)) != NULL) {
- if (inst->do_xlat){
- pairxlatmove(request, reply_pairs, &reply_tmp);
- pairfree(&reply_tmp);
- }
- else
- pairadd(reply_pairs,reply_tmp);
+ return NULL;
}
- if (inst->do_comp && paircompare(request,request->packet->vps,*check_pairs,reply_pairs) != 0){
-#ifdef NOVELL
- /* Don't perform eDirectory APC if RADIUS authorize fails */
- int apc_attr;
- VALUE_PAIR *vp_apc;
- DICT_ATTR *dattr;
-
- dattr = dict_attrbyname("eDir-APC");
- apc_attr = dattr->attr;
-
- vp_apc = pairfind(request->config_items, apc_attr, 0);
- if(vp_apc)
- vp_apc->vp_strvalue[0] = '1';
-#endif
-
- RDEBUG("Pairs do not match. Rejecting user.");
- snprintf(module_fmsg,sizeof(module_fmsg)," [%s] Pairs do not match", inst->xlat_name);
- module_fmsg_vp = pairmake("Module-Failure-Message", module_fmsg, T_OP_EQ);
- pairadd(&request->packet->vps, module_fmsg_vp);
+ if ((msg = ldap_first_entry((*pconn)->ld, result)) == NULL) {
ldap_msgfree(result);
- ldap_release_conn(conn_id,inst);
+ return NULL;
+ }
- return RLM_MODULE_REJECT;
+ if ((user_dn = ldap_get_dn((*pconn)->ld, msg)) == NULL) {
+ ldap_msgfree(result);
+ return NULL;
}
-
- /*
- * More warning messages for people who can't be bothered
- * to read the documentation.
- */
- if (inst->expect_password && (debug_flag > 1)) {
- if (!pairfind(request->config_items, PW_CLEARTEXT_PASSWORD, 0) &&
- !pairfind(request->config_items, PW_NT_PASSWORD, 0) &&
- !pairfind(request->config_items, PW_USER_PASSWORD, 0) &&
- !pairfind(request->config_items, PW_PASSWORD_WITH_HEADER, 0) &&
- !pairfind(request->config_items, PW_CRYPT_PASSWORD, 0)) {
- DEBUG("WARNING: No \"known good\" password was found in LDAP. Are you sure that the user is configured correctly?");
- }
- }
- /*
- * Module should default to LDAP authentication if no Auth-Type
- * specified. Note that we do this ONLY if configured, AND we
- * set the Auth-Type to our module name, which allows multiple
- * ldap instances to work.
- */
- if (inst->set_auth_type &&
- (pairfind(*check_pairs, PW_AUTH_TYPE, 0) == NULL) &&
- request->password &&
- (request->password->attribute == PW_USER_PASSWORD) &&
- !added_known_password) {
- pairadd(check_pairs, pairmake("Auth-Type", inst->auth_type, T_OP_EQ));
- RDEBUG("Setting Auth-Type = %s", inst->auth_type);
- }
-
- if (inst->access_attr)
- RDEBUG("user %s authorized to use remote access",
- request->username->vp_strvalue);
+ vp = pairmake("LDAP-UserDn", user_dn, T_OP_EQ);
+ if (!vp) {
+ ldap_memfree(user_dn);
+ ldap_msgfree(result);
+ return NULL;
+ }
+
+ pairadd(&request->config_items, vp);
+ ldap_memfree(user_dn);
ldap_msgfree(result);
- ldap_release_conn(conn_id,inst);
- return RLM_MODULE_OK;
+ return vp->vp_strvalue;
}
+
/*****************************************************************************
*
- * Function: rlm_ldap_authenticate
- *
- * Purpose: Check the user's password against ldap database
+ * Perform LDAP-Group comparison checking
*
*****************************************************************************/
-static int ldap_authenticate(void *instance, REQUEST * request)
+static int ldap_groupcmp(void *instance, REQUEST *request,
+ UNUSED VALUE_PAIR *thing, VALUE_PAIR *check,
+ UNUSED VALUE_PAIR *check_pairs,
+ UNUSED VALUE_PAIR **reply_pairs)
{
- LDAP *ld_user;
- LDAPMessage *result, *msg;
- ldap_instance *inst = instance;
- static char firstattr[] = "uid";
- char *user_dn, *attrs[] = {firstattr, NULL};
- char filter[MAX_FILTER_STR_LEN];
- char basedn[MAX_FILTER_STR_LEN];
- int res;
- VALUE_PAIR *vp_user_dn;
- VALUE_PAIR *module_fmsg_vp;
- char module_fmsg[MAX_STRING_LEN];
+ ldap_instance *inst = instance;
+ int i, rcode, found;
+ LDAPMessage *result = NULL;
+ LDAPMessage *msg = NULL;
+ static char firstattr[] = "dn";
+ char *attrs[] = {firstattr,NULL};
+ char **vals;
+ char *group_attrs[] = {inst->groupmemb_attr,NULL};
LDAP_CONN *conn;
- int conn_id = -1;
-#ifdef NOVELL
- char *err = NULL;
-#endif
+ char *user_dn;
+ int module_rcode;
+ char gr_filter[MAX_FILTER_STR_LEN];
+ char filter[MAX_FILTER_STR_LEN];
+ char basedn[MAX_FILTER_STR_LEN];
+
+ if (check->length == 0) {
+ RDEBUG("Cannot do comparison: group name is empty");
+ return 1;
+ }
+
+ conn = ldap_get_socket(inst);
+ if (!conn) return 1;
/*
- * Ensure that we're being passed a plain-text password, and not
- * anything else.
+ * This is used in the default membership filter.
*/
+ user_dn = get_userdn(&conn, request, &module_rcode);
+ if (!user_dn) {
+ ldap_release_socket(inst, conn);
+ return 1;
+ }
- if (!request->username) {
- radlog(L_AUTH, " [%s] Attribute \"User-Name\" is required for authentication.\n", inst->xlat_name);
- return RLM_MODULE_INVALID;
+ if (!inst->groupmemb_filt) goto check_attr;
+
+ if (!radius_xlat(filter, sizeof(filter),
+ inst->groupmemb_filt, request, ldap_escape_func)) {
+ RDEBUG("Failed creating group filter");
+ return 1;
}
- if (!request->password){
- radlog(L_AUTH, " [%s] Attribute \"User-Password\" is required for authentication.", inst->xlat_name);
- DEBUG2(" You seem to have set \"Auth-Type := LDAP\" somewhere.");
- DEBUG2(" THAT CONFIGURATION IS WRONG. DELETE IT.");
- DEBUG2(" YOU ARE PREVENTING THE SERVER FROM WORKING PROPERLY.");
- return RLM_MODULE_INVALID;
+ /*
+ * If it's a DN, use that.
+ */
+ if (strchr(check->vp_strvalue,',') != NULL) {
+ strlcpy(filter, gr_filter, sizeof(filter));
+ strlcpy(basedn, check->vp_strvalue, sizeof(basedn));
+
+ } else {
+ snprintf(filter, sizeof(filter), "(&(%s=%s)%s)",
+ inst->groupname_attr,
+ check->vp_strvalue, gr_filter);
+
+ /*
+ * get_userdn does this, too. Oh well.
+ */
+ if (!radius_xlat(basedn, sizeof(basedn), inst->basedn,
+ request, ldap_escape_func)) {
+ radlog(L_ERR, " [%s] unable to create basedn.\n",
+ inst->xlat_name);
+ return 1;
+ }
}
- if(request->password->attribute != PW_USER_PASSWORD) {
- radlog(L_AUTH, " [%s] Attribute \"User-Password\" is required for authentication. Cannot use \"%s\".", inst->xlat_name, request->password->name);
- return RLM_MODULE_INVALID;
+ rcode = perform_search(inst, &conn, basedn, LDAP_SCOPE_SUBTREE,
+ filter, attrs, &result);
+ if (rcode == 0) {
+ ldap_release_socket(inst, conn);
+ ldap_msgfree(result);
+ RDEBUG("User found in group %s", check->vp_strvalue);
+ return 0;
}
- if (request->password->length == 0) {
- snprintf(module_fmsg,sizeof(module_fmsg)," [%s] empty password supplied", inst->xlat_name);
- module_fmsg_vp = pairmake("Module-Failure-Message", module_fmsg, T_OP_EQ);
- pairadd(&request->packet->vps, module_fmsg_vp);
- return RLM_MODULE_INVALID;
+ if (rcode == -1) {
+ ldap_release_socket(inst, conn);
+ RDEBUG("Failed performing search");
+ return 1;
}
+ /* else the search returned -2, for "not found" */
+
/*
- * Check that we don't have any failed connections. If we do there's no real need
- * of runing. Also give it another chance if we have a lot of failed connections.
+ * Else the search returned NOTFOUND. See if we're
+ * configured to search for group membership using user
+ * object attribute.
*/
- if (inst->failed_conns > MAX_FAILED_CONNS_END)
- inst->failed_conns = 0;
- if (inst->failed_conns > MAX_FAILED_CONNS_START){
- inst->failed_conns++;
- return RLM_MODULE_FAIL;
+ if (!inst->groupmemb_attr) {
+ ldap_release_socket(inst, conn);
+ RDEBUG("Group %s was not found, or user is not a member",
+ check->vp_strvalue);
+ return 1;
}
+check_attr:
+ snprintf(filter ,sizeof(filter), "(objectclass=*)");
- RDEBUG("login attempt by \"%s\" with password \"%s\"",
- request->username->vp_strvalue, request->password->vp_strvalue);
-
- while ((vp_user_dn = pairfind(request->config_items,
- PW_LDAP_USERDN, 0)) == NULL) {
- if (!radius_xlat(filter, sizeof(filter), inst->filter,
- request, ldap_escape_func, inst)) {
- radlog(L_ERR, " [%s] unable to create filter.\n", inst->xlat_name);
- return RLM_MODULE_INVALID;
- }
-
- if (!radius_xlat(basedn, sizeof(basedn), inst->basedn,
- request, ldap_escape_func, inst)) {
- radlog(L_ERR, " [%s] unable to create basedn.\n", inst->xlat_name);
- return RLM_MODULE_INVALID;
- }
+ rcode = perform_search(inst, &conn, user_dn, LDAP_SCOPE_BASE,
+ filter, group_attrs, &result);
+ if (rcode < 0) {
+ RDEBUG("Search failed for group attrs");
+ ldap_release_socket(inst, conn);
+ return 1;
+ }
- if ((conn_id = ldap_get_conn(inst->conns,&conn,inst)) == -1){
- radlog(L_ERR, " [%s] All ldap connections are in use", inst->xlat_name);
- return RLM_MODULE_FAIL;
- }
- if ((res = perform_search(instance, conn, basedn, LDAP_SCOPE_SUBTREE, filter, attrs, &result)) != RLM_MODULE_OK) {
- if (res == RLM_MODULE_NOTFOUND){
- snprintf(module_fmsg,sizeof(module_fmsg)," [%s] User not found", inst->xlat_name);
- module_fmsg_vp = pairmake("Module-Failure-Message", module_fmsg, T_OP_EQ);
- pairadd(&request->packet->vps, module_fmsg_vp);
- }
- ldap_release_conn(conn_id,inst);
- return (res);
- }
- if ((msg = ldap_first_entry(conn->ld, result)) == NULL) {
- ldap_msgfree(result);
- ldap_release_conn(conn_id,inst);
- return RLM_MODULE_FAIL;
- }
- if ((user_dn = ldap_get_dn(conn->ld, msg)) == NULL) {
- RDEBUG("ldap_get_dn() failed");
- ldap_msgfree(result);
- ldap_release_conn(conn_id,inst);
- return RLM_MODULE_FAIL;
- }
- ldap_release_conn(conn_id,inst);
- pairadd(&request->config_items, pairmake("Ldap-UserDn", user_dn, T_OP_EQ));
- ldap_memfree(user_dn);
+ msg = ldap_first_entry(conn->ld, result);
+ if (!msg) {
+ RDEBUG("First entry failed for group attrs");
+ ldap_release_socket(inst, conn);
ldap_msgfree(result);
+ return 1;
}
- user_dn = vp_user_dn->vp_strvalue;
+ vals = ldap_get_values(conn->ld, msg, inst->groupmemb_attr);
+ if (!vals) {
+ RDEBUG("Get values failed for group attrs");
+ ldap_release_socket(inst, conn);
+ ldap_msgfree(result);
+ return 1;
+ }
- RDEBUG("user DN: %s", user_dn);
+ /*
+ * Loop over the list of groups the user is a member of,
+ * looking for a match.
+ */
+ found = FALSE;
+ for (i = 0; i < ldap_count_values(vals); i++){
+ LDAPMessage *gr_result = NULL;
-#ifndef NOVELL
- ld_user = ldap_connect(instance, user_dn, request->password->vp_strvalue,
- 1, &res, NULL);
-#else
- /* Don't perform eDirectory APC again after attempting to bind here. */
- {
- int apc_attr;
- DICT_ATTR *dattr;
- VALUE_PAIR *vp_apc;
- VALUE_PAIR *vp_auth_opt, *vp_state;
- int auth_opt_attr;
- char seq[256];
- char host_ipaddr[32];
- LDAP_CONN *conn1;
- int auth_state = -1;
- char *challenge = NULL;
- size_t challenge_len = MAX_CHALLENGE_LEN;
- char *state = NULL;
-
- dattr = dict_attrbyname("eDir-APC");
- apc_attr = dattr->attr;
- vp_apc = pairfind(request->config_items, apc_attr, 0);
- if(vp_apc && vp_apc->vp_strvalue[0] == '2')
- vp_apc->vp_strvalue[0] = '3';
-
- res = 0;
-
- dattr = dict_attrbyname("eDir-Auth-Option");
- auth_opt_attr = dattr->attr;
-
- vp_auth_opt = pairfind(request->config_items, auth_opt_attr, 0);
-
- if(vp_auth_opt )
- {
- RDEBUG("ldap auth option = %s", vp_auth_opt->vp_strvalue);
- strncpy(seq, vp_auth_opt->vp_strvalue, vp_auth_opt->length);
- seq[vp_auth_opt->length] = '\0';
- if( strcasecmp(seq, "<No Default>") ){
-
- /* Get the client IP address to check for packet validity */
- inet_ntop(AF_INET, &request->packet->src_ipaddr, host_ipaddr, sizeof(host_ipaddr));
-
- /* challenge variable is used to receive the challenge from the
- * Token method (if any) and also to send the state attribute
- * in case the request packet is a reply to a challenge
- */
- challenge = rad_malloc(MAX_CHALLENGE_LEN);
-
- /* If state attribute present in request it is a reply to challenge. */
- if((vp_state = pairfind(request->packet->vps, PW_STATE, 0))!= NULL ){
- RDEBUG("Response to Access-Challenge");
- strncpy(challenge, vp_state->vp_strvalue, sizeof(challenge));
- challenge_len = vp_state->length;
- challenge[challenge_len] = 0;
- auth_state = -2;
- }
-
- if ((conn_id = ldap_get_conn(inst->conns, &conn1, inst)) == -1){
- radlog(L_ERR, " [%s] All ldap connections are in use", inst->xlat_name);
- res = RLM_MODULE_FAIL;
- }
-
- if(!conn1){
- radlog(L_ERR, " [%s] NULL connection handle passed", inst->xlat_name);
- return RLM_MODULE_FAIL;
- }
-
- if (conn1->failed_conns > MAX_FAILED_CONNS_START){
- conn1->failed_conns++;
- if (conn1->failed_conns >= MAX_FAILED_CONNS_END){
- conn1->failed_conns = MAX_FAILED_CONNS_RESTART;
- conn1->bound = 0;
- }
- }
-retry:
- if (!conn1->bound || conn1->ld == NULL) {
- DEBUG2(" [%s] attempting LDAP reconnection", inst->xlat_name);
- if (conn1->ld){
- DEBUG2(" [%s] closing existing LDAP connection", inst->xlat_name);
- ldap_unbind_s(conn1->ld);
- }
- if ((conn1->ld = ldap_connect(instance, inst->login,inst->password, 0, &res, NULL)) == NULL) {
- radlog(L_ERR, " [%s] (re)connection attempt failed", inst->xlat_name);
- conn1->failed_conns++;
- return (RLM_MODULE_FAIL);
- }
- conn1->bound = 1;
- conn1->failed_conns = 0;
- }
- RDEBUG("Performing NMAS Authentication for user: %s, seq: %s \n", user_dn,seq);
-
- res = radLdapXtnNMASAuth(conn1->ld, user_dn, request->password->vp_strvalue, seq, host_ipaddr, &challenge_len, challenge, &auth_state );
-
- switch(res){
- case LDAP_SUCCESS:
- ldap_release_conn(conn_id,inst);
- if ( auth_state == -1)
- res = RLM_MODULE_FAIL;
- if ( auth_state != REQUEST_CHALLENGED){
- if (auth_state == REQUEST_ACCEPTED){
- RDEBUG("user %s authenticated succesfully",request->username->vp_strvalue);
- res = RLM_MODULE_OK;
- }else if(auth_state == REQUEST_REJECTED){
- RDEBUG("user %s authentication failed",request->username->vp_strvalue);
- res = RLM_MODULE_REJECT;
- }
- }else{
- /* Request challenged. Generate Reply-Message attribute with challenge data */
- pairadd(&request->reply->vps,pairmake("Reply-Message", challenge, T_OP_EQ));
- /* Generate state attribute */
- state = rad_malloc(MAX_CHALLENGE_LEN);
- (void) sprintf(state, "%s%s", challenge, challenge);
- vp_state = paircreate(PW_STATE, 0, PW_TYPE_OCTETS);
- memcpy(vp_state->vp_strvalue, state, strlen(state));
- vp_state->length = strlen(state);
- pairadd(&request->reply->vps, vp_state);
- free(state);
- /* Mark the packet as a Acceess-Challenge Packet */
- request->reply->code = PW_ACCESS_CHALLENGE;
- RDEBUG("Sending Access-Challenge.");
- res = RLM_MODULE_HANDLED;
- }
- if(challenge)
- free(challenge);
- return res;
- case LDAP_SERVER_DOWN:
- radlog(L_ERR, " [%s] nmas authentication failed: LDAP connection lost.", inst->xlat_name); conn->failed_conns++;
- if (conn->failed_conns <= MAX_FAILED_CONNS_START){
- radlog(L_INFO, " [%s] Attempting reconnect", inst->xlat_name);
- conn->bound = 0;
- goto retry;
- }
- if(challenge)
- free(challenge);
- return RLM_MODULE_FAIL;
- default:
- ldap_release_conn(conn_id,inst);
- if(challenge)
- free(challenge);
- return RLM_MODULE_FAIL;
- }
- }
+ if (strcmp(vals[i], check->vp_strvalue) == 0){
+ found = TRUE;
+ break;
}
- }
- ld_user = ldap_connect(instance, user_dn, request->password->vp_strvalue,
- 1, &res, &err);
+ /*
+ * The group isn't a DN: ignore it.
+ */
+ if (strchr(vals[i], ',') == NULL) continue;
- if(err != NULL){
- /* 'err' contains the LDAP connection error description */
- RDEBUG("%s", err);
- pairadd(&request->reply->vps, pairmake("Reply-Message", err, T_OP_EQ));
- ldap_memfree((void *)err);
- }
-#endif
+ /* This looks like a DN. Do tons more work. */
+ snprintf(filter,sizeof(filter), "(%s=%s)",
+ inst->groupname_attr, check->vp_strvalue);
- if (ld_user == NULL){
- if (res == RLM_MODULE_REJECT){
- inst->failed_conns = 0;
- snprintf(module_fmsg,sizeof(module_fmsg)," [%s] Bind as user failed", inst->xlat_name);
- module_fmsg_vp = pairmake("Module-Failure-Message", module_fmsg, T_OP_EQ);
- pairadd(&request->packet->vps, module_fmsg_vp);
- }
- if (res == RLM_MODULE_FAIL){
- RDEBUG("ldap_connect() failed");
- inst->failed_conns++;
+ rcode = perform_search(inst, &conn, vals[i], LDAP_SCOPE_BASE,
+ filter, attrs, &gr_result);
+ if (rcode == -1) {
+ RDEBUG("Failed doing group search");
+ ldap_value_free(vals);
+ ldap_msgfree(result);
+ ldap_release_socket(inst, conn);
+ return 1;
}
- return (res);
+
+ ldap_msgfree(gr_result);
+ found = TRUE;
+ break;
}
+ ldap_value_free(vals);
+ ldap_msgfree(result);
+ ldap_release_socket(inst, conn);
- RDEBUG("user %s authenticated succesfully",
- request->username->vp_strvalue);
- ldap_unbind_s(ld_user);
- inst->failed_conns = 0;
+ if (!found){
+ RDEBUG("groupcmp: Group %s not found, or user is not a member",
+ check->vp_strvalue);
+ return 1;
+ }
- return RLM_MODULE_OK;
+ return 0;
}
-#ifdef NOVELL
+
/*****************************************************************************
*
- * Function: rlm_ldap_postauth
- *
- * Purpose: Perform eDirectory account policy check and failed-login reporting
- * to eDirectory.
+ * Detach from the LDAP server and cleanup internal state.
*
*****************************************************************************/
-static int ldap_postauth(void *instance, REQUEST * request)
+static int ldap_detach(void *instance)
{
- int res = RLM_MODULE_FAIL;
- int inst_attr, apc_attr;
- char password[UNIVERSAL_PASS_LEN];
- ldap_instance *inst = instance;
- LDAP_CONN *conn;
- VALUE_PAIR *vp_inst, *vp_apc;
- DICT_ATTR *dattr;
-
- dattr = dict_attrbyname("LDAP-Instance");
- inst_attr = dattr->attr;
- dattr = dict_attrbyname("eDir-APC");
- apc_attr = dattr->attr;
+ ldap_instance *inst = instance;
- vp_inst = pairfind(request->config_items, inst_attr, 0);
+ fr_connection_pool_delete(inst->pool);
- /*
- * Check if the password in the config items list is the user's UP which has
- * been read in the authorize method of this instance of the LDAP module.
- */
- if((vp_inst == NULL) || strcmp(vp_inst->vp_strvalue, inst->xlat_name))
- return RLM_MODULE_NOOP;
+ if (inst->map_file) {
+ rlm_ldap_map_free(&inst->check_map);
+ rlm_ldap_map_free(&inst->reply_map);
+ free(inst->attrs);
+ }
- vp_apc = pairfind(request->config_items, apc_attr, 0);
+ free(inst);
- switch(vp_apc->vp_strvalue[0]){
- case '1':
- /* Account policy check not enabled */
- case '3':
- /* Account policy check has been completed */
- res = RLM_MODULE_NOOP;
- break;
- case '2':
- {
- int err, conn_id = -1;
- char *error_msg = NULL;
- VALUE_PAIR *vp_fdn, *vp_pwd;
- DICT_ATTR *da;
-
- if (request->reply->code == PW_AUTHENTICATION_REJECT) {
- /* Bind to eDirectory as the RADIUS user with a wrong password. */
- vp_pwd = pairfind(request->config_items, PW_CLEARTEXT_PASSWORD, 0);
- if (vp_pwd && *vp_pwd->vp_strvalue) {
- strcpy(password, vp_pwd->vp_strvalue);
- if (password[0] != 'a') {
- password[0] = 'a';
- } else {
- password[0] = 'b';
- }
- } else {
- strcpy(password, "dummy_password");
- }
- res = RLM_MODULE_REJECT;
- } else {
- /* Bind to eDirectory as the RADIUS user using the user's UP */
- vp_pwd = pairfind(request->config_items, PW_CLEARTEXT_PASSWORD, 0);
- if (vp_pwd == NULL) {
- RDEBUG("User's Universal Password not in config items list.");
- return RLM_MODULE_FAIL;
- }
- strcpy(password, vp_pwd->vp_strvalue);
- }
-
- if ((da = dict_attrbyname("Ldap-UserDn")) == NULL) {
- RDEBUG("Attribute for user FDN not found in dictionary. Unable to proceed");
- return RLM_MODULE_FAIL;
- }
-
- vp_fdn = pairfind(request->config_items, da->attr, 0);
- if (vp_fdn == NULL) {
- RDEBUG("User's FQDN not in config items list.");
- return RLM_MODULE_FAIL;
- }
-
- if ((conn_id = ldap_get_conn(inst->apc_conns, &conn, inst)) == -1){
- radlog(L_ERR, " [%s] All ldap connections are in use", inst->xlat_name);
- return RLM_MODULE_FAIL;
- }
-
- /*
- * If there is an existing LDAP
- * connection to the directory,
- * bind over it. Otherwise,
- * establish a new connection.
- */
- postauth_reconnect:
- if (!conn->bound || conn->ld == NULL) {
- DEBUG2(" [%s] attempting LDAP reconnection", inst->xlat_name);
- if (conn->ld){
- DEBUG2(" [%s] closing existing LDAP connection", inst->xlat_name);
- ldap_unbind_s(conn->ld);
- }
- if ((conn->ld = ldap_connect(instance, (char *)vp_fdn->vp_strvalue, password, 0, &res, &error_msg)) == NULL) {
- radlog(L_ERR, " [%s] eDirectory account policy check failed.", inst->xlat_name);
-
- if (error_msg != NULL) {
- RDEBUG("%s", error_msg);
- pairadd(&request->reply->vps, pairmake("Reply-Message", error_msg, T_OP_EQ));
- ldap_memfree((void *)error_msg);
- }
-
- vp_apc->vp_strvalue[0] = '3';
- ldap_release_apc_conn(conn_id, inst);
- return RLM_MODULE_REJECT;
- }
- conn->bound = 1;
- } else if((err = ldap_simple_bind_s(conn->ld, (char *)vp_fdn->vp_strvalue, password)) != LDAP_SUCCESS) {
- if (err == LDAP_SERVER_DOWN) {
- conn->bound = 0;
- goto postauth_reconnect;
- }
- RDEBUG("eDirectory account policy check failed.");
- ldap_get_option(conn->ld, LDAP_OPT_ERROR_STRING, &error_msg);
- if (error_msg != NULL) {
- RDEBUG("%s", error_msg);
- pairadd(&request->reply->vps, pairmake("Reply-Message", error_msg, T_OP_EQ));
- ldap_memfree((void *)error_msg);
- }
- vp_apc->vp_strvalue[0] = '3';
- ldap_release_apc_conn(conn_id, inst);
- return RLM_MODULE_REJECT;
- }
- vp_apc->vp_strvalue[0] = '3';
- ldap_release_apc_conn(conn_id, inst);
- return RLM_MODULE_OK;
- }
- }
- return res;
+ return 0;
}
-#endif
-#if LDAP_SET_REBIND_PROC_ARGS == 3
-static int ldap_rebind(LDAP *ld, LDAP_CONST char *url,
- UNUSED ber_tag_t request, UNUSED ber_int_t msgid,
- void *params )
+/*************************************************************************
+ *
+ * Function: rlm_ldap_instantiate
+ *
+ * Purpose: Uses section of radiusd config file passed as parameter
+ * to create an instance of the module.
+ *
+ *************************************************************************/
+static int ldap_instantiate(CONF_SECTION * conf, void **instance)
{
- ldap_instance *inst = params;
+ ldap_instance *inst;
- DEBUG(" [%s] rebind to URL %s", inst->xlat_name,url);
- return ldap_bind_s(ld, inst->login, inst->password, LDAP_AUTH_SIMPLE);
-}
-#endif
+ inst = rad_malloc(sizeof *inst);
+ if (!inst) {
+ return -1;
+ }
+ memset(inst, 0, sizeof(*inst));
+ inst->cs = conf;
-static LDAP *ldap_connect(void *instance, const char *dn, const char *password,
- int auth, int *result, char **err)
-{
- ldap_instance *inst = instance;
- LDAP *ld = NULL;
- int msgid, rc, ldap_version;
- int ldap_errno = 0;
- LDAPMessage *res;
- struct timeval tv;
+ inst->chase_referrals = 2; /* use OpenLDAP defaults */
+ inst->rebind = 2;
- if (inst->is_url){
-#ifdef HAVE_LDAP_INITIALIZE
- DEBUG(" [%s] (re)connect to %s, authentication %d", inst->xlat_name, inst->server, auth);
- if (ldap_initialize(&ld, inst->server) != LDAP_SUCCESS) {
- exec_trigger(NULL, inst->cs, "modules.ldap.fail", FALSE);
- radlog(L_ERR, " [%s] ldap_initialize() failed", inst->xlat_name);
- *result = RLM_MODULE_FAIL;
- return (NULL);
- }
-#endif
- } else {
- DEBUG(" [%s] (re)connect to %s:%d, authentication %d", inst->xlat_name, inst->server, inst->port, auth);
- if ((ld = ldap_init(inst->server, inst->port)) == NULL) {
- exec_trigger(NULL, inst->cs, "modules.ldap.fail", FALSE);
- radlog(L_ERR, " [%s] ldap_init() failed", inst->xlat_name);
- *result = RLM_MODULE_FAIL;
- return (NULL);
- }
+ if (cf_section_parse(conf, inst, module_config) < 0) {
+ free(inst);
+ return -1;
}
- tv.tv_sec = inst->net_timeout;
- tv.tv_usec = 0;
- if (ldap_set_option(ld, LDAP_OPT_NETWORK_TIMEOUT,
- (void *) &tv) != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] Could not set LDAP_OPT_NETWORK_TIMEOUT %d: %s", inst->xlat_name, inst->net_timeout, ldap_err2string(ldap_errno));
+ if (inst->server == NULL) {
+ radlog(L_ERR, "rlm_ldap: missing 'server' directive.");
+ ldap_detach(inst);
+ return -1;
}
/*
- * Leave "chase_referrals" unset to use the OpenLDAP
- * default.
+ * Check for URLs. If they're used and the library doesn't
+ * support them, then complain.
*/
- if (inst->chase_referrals != 2) {
- if (inst->chase_referrals) {
- rc=ldap_set_option(ld, LDAP_OPT_REFERRALS,
- LDAP_OPT_ON);
-
-#if LDAP_SET_REBIND_PROC_ARGS == 3
- if (inst->rebind == 1) {
- ldap_set_rebind_proc(ld, ldap_rebind,
- inst);
- }
+ inst->is_url = 0;
+ if (ldap_is_ldap_url(inst->server)) {
+#ifdef HAVE_LDAP_INITIALIZE
+ inst->is_url = 1;
+ inst->port = 0;
+#else
+ radlog(L_ERR, "rlm_ldap: 'server' directive is in URL form but ldap_initialize() is not available.");
+ ldap_detach(inst);
+ return -1;
#endif
- } else {
- rc=ldap_set_option(ld, LDAP_OPT_REFERRALS,
- LDAP_OPT_OFF);
- }
- if (rc != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] Could not set LDAP_OPT_REFERRALS=%d %s", inst->xlat_name, inst->chase_referrals, ldap_err2string(ldap_errno));
- }
}
- if (ldap_set_option(ld, LDAP_OPT_TIMELIMIT,
- (void *) &(inst->timelimit)) != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] Could not set LDAP_OPT_TIMELIMIT %d: %s", inst->xlat_name, inst->timelimit, ldap_err2string(ldap_errno));
- }
-
- if (inst->ldap_debug && ldap_set_option(NULL, LDAP_OPT_DEBUG_LEVEL, &(inst->ldap_debug)) != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] Could not set LDAP_OPT_DEBUG_LEVEL %d: %s", inst->xlat_name, inst->ldap_debug, ldap_err2string(ldap_errno));
+ /* workaround for servers which support LDAPS but not START TLS */
+ if (inst->port == LDAPS_PORT || inst->tls_mode) {
+ inst->tls_mode = LDAP_OPT_X_TLS_HARD;
+ } else {
+ inst->tls_mode = 0;
}
- ldap_version = LDAP_VERSION3;
- if (ldap_set_option(ld, LDAP_OPT_PROTOCOL_VERSION,
- &ldap_version) != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] Could not set LDAP version to V3: %s", inst->xlat_name, ldap_err2string(ldap_errno));
- }
+ inst->xlat_name = cf_section_name2(conf);
+ if (!inst->xlat_name) inst->xlat_name = cf_section_name1(conf);
-#ifdef LDAP_OPT_X_KEEPALIVE_IDLE
- if (ldap_set_option(ld, LDAP_OPT_X_KEEPALIVE_IDLE,
- (void *) &(inst->keepalive_idle)) != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] Could not set LDAP_OPT_X_KEEPALIVE_IDLE %d: %s", inst->xlat_name, inst->keepalive_idle, ldap_err2string(ldap_errno));
+#if LDAP_SET_REBIND_PROC_ARGS != 3
+ /*
+ * The 2-argument rebind doesn't take an instance
+ * variable. Our rebind function needs the instance
+ * variable for the username, password, etc.
+ */
+ if (inst->rebind == 1) {
+ radlog(L_ERR, "%s: Cannot use 'rebind' directive as this version of libldap does not support the API that we need.", inst->xlat-name);
+ ldap_detach(inst);
+ return -1;
}
#endif
-#ifdef LDAP_OPT_X_KEEPALIVE_PROBES
- if (ldap_set_option(ld, LDAP_OPT_X_KEEPALIVE_PROBES,
- (void *) &(inst->keepalive_probes)) != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] Could not set LDAP_OPT_X_KEEPALIVE_PROBES %d: %s", inst->xlat_name, inst->keepalive_probes, ldap_err2string(ldap_errno));
- }
-#endif
+ if (inst->map_file) {
+ int offset = 0;
-#ifdef LDAP_OPT_X_KEEPALIVE_INTERVAL
- if (ldap_set_option(ld, LDAP_OPT_X_KEEPALIVE_INTERVAL,
- (void *) &(inst->keepalive_interval)) != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] Could not set LDAP_OPT_X_KEEPALIVE_INTERVAL %d: %s", inst->xlat_name, inst->keepalive_interval, ldap_err2string(ldap_errno));
- }
-#endif
+ inst->attrs = rad_malloc(sizeof(inst->attrs[0]) * MAX_ATTRMAP);
+ inst->attrs[0] = NULL;
-#ifdef HAVE_LDAP_START_TLS
- if (inst->tls_mode) {
- DEBUG(" [%s] setting TLS mode to %d", inst->xlat_name, inst->tls_mode);
- if (ldap_set_option(ld, LDAP_OPT_X_TLS,
- (void *) &(inst->tls_mode)) != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] could not set LDAP_OPT_X_TLS option %s:", inst->xlat_name, ldap_err2string(ldap_errno));
+ if (inst->profile_attr) inst->attrs[offset++] = inst->profile_attr;
+ if (inst->access_attr) inst->attrs[offset++] = inst->access_attr;
+
+ if (rlm_ldap_map_read(inst->xlat_name, inst->map_file,
+ &inst->check_map, &inst->reply_map,
+ offset,
+ inst->attrs) < 0) {
+ ldap_detach(inst);
+ return -1;
}
- }
- if (inst->tls_cacertfile != NULL) {
- DEBUG(" [%s] setting TLS CACert File to %s", inst->xlat_name, inst->tls_cacertfile);
+ if (!inst->check_map || !inst->reply_map) {
+ radlog(L_ERR, "%s: Empty file: %s",
+ inst->xlat_name, inst->map_file);
+ ldap_detach(inst);
+ return -1;
+ }
- if ( ldap_set_option( NULL, LDAP_OPT_X_TLS_CACERTFILE,
- (void *) inst->tls_cacertfile )
- != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] could not set "
- "LDAP_OPT_X_TLS_CACERTFILE option to %s: %s",
- inst->xlat_name,
- inst->tls_cacertfile,
- ldap_err2string(ldap_errno));
+ } else {
+ if (inst->default_profile || inst->profile_attr) {
+ radlog(L_ERR, "%s: You MUST specify \"dictionary_mapping\" to use the profile attributes", inst->xlat_name);
+ ldap_detach(inst);
+ return -1;
}
}
- if (inst->tls_cacertdir != NULL) {
- DEBUG(" [%s] setting TLS CACert Directory to %s", inst->xlat_name, inst->tls_cacertdir);
-
- if ( ldap_set_option( NULL, LDAP_OPT_X_TLS_CACERTDIR,
- (void *) inst->tls_cacertdir )
- != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] could not set "
- "LDAP_OPT_X_TLS_CACERTDIR option to %s: %s",
- inst->xlat_name,
- inst->tls_cacertdir,
- ldap_err2string(ldap_errno));
+ /*
+ * Group comparison checks.
+ */
+ paircompare_register(PW_LDAP_GROUP, PW_USER_NAME, ldap_groupcmp, inst);
+ if (cf_section_name2(conf)) {
+ DICT_ATTR *da;
+ ATTR_FLAGS flags;
+ char buffer[256];
+
+ snprintf(buffer, sizeof(buffer), "%s-Ldap-Group", inst->xlat_name);
+ memset(&flags, 0, sizeof(flags));
+
+ dict_addattr(buffer, -1, 0, PW_TYPE_STRING, flags);
+ da = dict_attrbyname(buffer);
+ if (!da) {
+ radlog(L_ERR, "%s: Failed creating attribute %s",
+ inst->xlat_name, buffer);
+ ldap_detach(inst);
+ return -1;
}
- }
- if (strcmp(TLS_DEFAULT_VERIFY, inst->tls_require_cert ) != 0 ) {
- DEBUG(" [%s] setting TLS Require Cert to %s", inst->xlat_name,
- inst->tls_require_cert);
+ paircompare_register(da->attr, PW_USER_NAME, ldap_groupcmp, inst);
}
+ xlat_register(inst->xlat_name, ldap_xlat, inst);
-#ifdef HAVE_LDAP_INT_TLS_CONFIG
- if (ldap_int_tls_config(NULL, LDAP_OPT_X_TLS_REQUIRE_CERT,
- (inst->tls_require_cert)) != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] could not set ",
- "LDAP_OPT_X_TLS_REQUIRE_CERT option to %s: %s",
- inst->xlat_name,
- inst->tls_require_cert,
- ldap_err2string(ldap_errno));
+ /*
+ * Initialize the socket pool.
+ */
+ inst->pool = fr_connection_pool_init(inst->cs, inst,
+ ldap_conn_create,
+ NULL,
+ ldap_conn_delete);
+ if (!inst->pool) {
+ ldap_detach(inst);
+ return -1;
}
-#endif
+
+ *instance = inst;
+ return 0;
+}
- if (inst->tls_certfile != NULL) {
- DEBUG(" [%s] setting TLS Cert File to %s", inst->xlat_name, inst->tls_certfile);
-
- if (ldap_set_option(NULL, LDAP_OPT_X_TLS_CERTFILE,
- (void *) inst->tls_certfile)
- != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] could not set "
- "LDAP_OPT_X_TLS_CERTFILE option to %s: %s",
- inst->xlat_name,
- inst->tls_certfile,
- ldap_err2string(ldap_errno));
- }
- }
- if (inst->tls_keyfile != NULL) {
- DEBUG(" [%s] setting TLS Key File to %s", inst->xlat_name,
- inst->tls_keyfile);
+static void module_failure_msg(VALUE_PAIR **vps, const char *fmt, ...)
+{
+ va_list ap;
+ VALUE_PAIR *vp;
- if ( ldap_set_option( NULL, LDAP_OPT_X_TLS_KEYFILE,
- (void *) inst->tls_keyfile )
- != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] could not set "
- "LDAP_OPT_X_TLS_KEYFILE option to %s: %s",
- inst->xlat_name,
- inst->tls_keyfile, ldap_err2string(ldap_errno));
- }
+ va_start(ap, fmt);
+ vp = paircreate(PW_MODULE_FAILURE_MESSAGE, 0, PW_TYPE_STRING);
+ if (!vp) {
+ va_end(ap);
+ return;
}
- if (inst->tls_randfile != NULL) {
- DEBUG(" [%s] setting TLS Key File to %s", inst->xlat_name,
- inst->tls_randfile);
+ vsnprintf(vp->vp_strvalue, sizeof(vp->vp_strvalue), fmt, ap);
- if (ldap_set_option(NULL, LDAP_OPT_X_TLS_RANDOM_FILE,
- (void *) inst->tls_randfile)
- != LDAP_OPT_SUCCESS) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- radlog(L_ERR, " [%s] could not set "
- "LDAP_OPT_X_TLS_RANDOM_FILE option to %s: %s",
- inst->xlat_name,
- inst->tls_randfile, ldap_err2string(ldap_errno));
- }
- }
+ pairadd(vps, vp);
+}
- if (inst->start_tls) {
- DEBUG(" [%s] starting TLS", inst->xlat_name);
- rc = ldap_start_tls_s(ld, NULL, NULL);
- if (rc != LDAP_SUCCESS) {
- DEBUG(" [%s] ldap_start_tls_s()", inst->xlat_name);
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER,
- &ldap_errno);
- radlog(L_ERR, " [%s] could not start TLS %s", inst->xlat_name,
- ldap_err2string(ldap_errno));
- *result = RLM_MODULE_FAIL;
- ldap_unbind_s(ld);
- exec_trigger(NULL, inst->cs, "modules.ldap.fail", FALSE);
- return (NULL);
+
+static int check_access(ldap_instance *inst, LDAP_CONN *conn, LDAPMessage *msg)
+{
+ int rcode = -1;
+ char **vals = NULL;
+
+ vals = ldap_get_values(conn->ld, msg, inst->access_attr);
+ if (vals) {
+ if (inst->positive_access_attr) {
+ if (strncmp(vals[0], "FALSE", 5) == 0) {
+ DEBUG("dialup access disabled");
+
+ } else {
+ rcode = 0;
+ }
+
+ } else {
+ DEBUG("%s attribute exists - access denied by default",
+ inst->access_attr);
}
- }
-#endif /* HAVE_LDAP_START_TLS */
- if (inst->is_url){
- DEBUG(" [%s] bind as %s/%s to %s", inst->xlat_name,
- dn, password, inst->server);
+ ldap_value_free(vals);
+
+ } else if (inst->positive_access_attr) {
+ DEBUG("No %s attribute - access denied by default", inst->access_attr);
+
} else {
- DEBUG(" [%s] bind as %s/%s to %s:%d", inst->xlat_name,
- dn, password, inst->server, inst->port);
+ rcode = 0;
}
- msgid = ldap_bind(ld, dn, password,LDAP_AUTH_SIMPLE);
- if (msgid == -1) {
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- if(err != NULL){
- ldap_get_option(ld, LDAP_OPT_ERROR_STRING, err);
- }
- if (inst->is_url) {
- radlog(L_ERR, " [%s] %s bind to %s failed: %s", inst->xlat_name,
- dn, inst->server, ldap_err2string(ldap_errno));
- } else {
- radlog(L_ERR, " [%s] %s bind to %s:%d failed: %s", inst->xlat_name,
- dn, inst->server, inst->port,
- ldap_err2string(ldap_errno));
- }
- *result = RLM_MODULE_FAIL;
- ldap_unbind_s(ld);
- return (NULL);
+ return rcode;
+}
+
+
+static void apply_profile(ldap_instance *inst, LDAP_CONN **pconn,
+ REQUEST *request, char *profile)
+{
+ int rcode;
+ LDAPMessage *result, *msg;
+ VALUE_PAIR *check_tmp, *reply_tmp;
+ char filter[MAX_FILTER_STR_LEN];
+
+ if (!profile || !*profile) return;
+
+ strlcpy(filter,inst->base_filter,sizeof(filter));
+
+ rcode = perform_search(inst, pconn, profile, LDAP_SCOPE_BASE, filter,
+ inst->attrs, &result);
+ if (rcode < 0) {
+ RDEBUG("FAILED Searching profile %s", profile);
+ return;
}
- DEBUG(" [%s] waiting for bind result ...", inst->xlat_name);
- tv.tv_sec = inst->timeout;
- tv.tv_usec = 0;
- rc = ldap_result(ld, msgid, 1, &tv, &res);
+ msg = ldap_first_entry((*pconn)->ld, result);
+ if (!msg) goto free_result;
- if (rc < 1) {
- DEBUG(" [%s] ldap_result()", inst->xlat_name);
- ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &ldap_errno);
- if(err != NULL){
- ldap_get_option(ld, LDAP_OPT_ERROR_STRING, err);
- }
- if (inst->is_url) {
- radlog(L_ERR, " [%s] %s bind to %s failed: %s", inst->xlat_name,
- dn, inst->server, (rc == 0) ? "timeout" : ldap_err2string(ldap_errno));
- } else {
- radlog(L_ERR, " [%s] %s bind to %s:%d failed: %s", inst->xlat_name,
- dn, inst->server, inst->port,
- (rc == 0) ? "timeout" : ldap_err2string(ldap_errno));
- }
- *result = RLM_MODULE_FAIL;
- ldap_unbind_s(ld);
- return (NULL);
+ check_tmp = rlm_ldap_pairget(inst->xlat_name, (*pconn)->ld, msg,
+ inst->check_map, &request->config_items, 1);
+ if (check_tmp) {
+ pairfree(&check_tmp);
}
- ldap_errno = ldap_result2error(ld, res, 1);
- switch (ldap_errno) {
- case LDAP_SUCCESS:
- DEBUG(" [%s] Bind was successful", inst->xlat_name);
- *result = RLM_MODULE_OK;
- break;
+ reply_tmp = rlm_ldap_pairget(inst->xlat_name, (*pconn)->ld, msg,
+ inst->reply_map, &request->packet->vps, 0);
+ if (reply_tmp) {
+ pairfree(&reply_tmp);
+ }
- case LDAP_INVALID_CREDENTIALS:
- if (auth){
- DEBUG(" [%s] Bind failed with invalid credentials", inst->xlat_name);
- *result = RLM_MODULE_REJECT;
- } else {
- radlog(L_ERR, " [%s] LDAP login failed: check identity, password settings in ldap section of radiusd.conf", inst->xlat_name);
- *result = RLM_MODULE_FAIL;
- }
- if(err != NULL){
- ldap_get_option(ld, LDAP_OPT_ERROR_STRING, err);
- }
- break;
+free_result:
+ ldap_msgfree(result);
+}
- case LDAP_CONSTRAINT_VIOLATION:
- DEBUG("rlm_ldap: Bind failed with constraint violation");
- *result = RLM_MODULE_REJECT;
- if(err != NULL){
- ldap_get_option(ld, LDAP_OPT_ERROR_STRING, err);
- }
- break;
- default:
- if (inst->is_url) {
- radlog(L_ERR," [%s] %s bind to %s failed %s", inst->xlat_name,
- dn, inst->server, ldap_err2string(ldap_errno));
+static void do_one_map(ldap_instance *inst, LDAP *ld, REQUEST *request,
+ LDAPMessage *msg, TLDAP_RADIUS *map, VALUE_PAIR **vps,
+ int is_check)
+{
+ VALUE_PAIR *vp;
+
+ vp = rlm_ldap_pairget(inst->xlat_name, ld, msg, map, vps, is_check);
+ if (vp) {
+ if (inst->do_xlat) {
+ pairxlatmove(request, vps, &vp);
+ pairfree(&vp);
+
} else {
- radlog(L_ERR," [%s] %s bind to %s:%d failed %s", inst->xlat_name,
- dn, inst->server, inst->port,
- ldap_err2string(ldap_errno));
- }
- *result = RLM_MODULE_FAIL;
- if(err != NULL){
- ldap_get_option(ld, LDAP_OPT_ERROR_STRING, err);
+ pairadd(vps, vp);
}
}
- if (*result != RLM_MODULE_OK) {
- ldap_unbind_s(ld);
- ld = NULL;
- }
- return ld;
}
-/*****************************************************************************
+static void do_check_reply(ldap_instance *inst, LDAP *ld, REQUEST *request,
+ LDAPMessage *msg)
+{
+ do_one_map(inst, ld, request, msg, inst->check_map, &request->config_items, 1);
+ do_one_map(inst, ld, request, msg, inst->reply_map, &request->reply->vps, 0);
+
+ /*
+ * More warning messages for people who can't be bothered
+ * to read the documentation.
+ */
+ if (debug_flag > 1) {
+ if (!pairfind(request->config_items, PW_CLEARTEXT_PASSWORD, 0) &&
+ !pairfind(request->config_items, PW_NT_PASSWORD, 0) &&
+ !pairfind(request->config_items, PW_USER_PASSWORD, 0) &&
+ !pairfind(request->config_items, PW_PASSWORD_WITH_HEADER, 0) &&
+ !pairfind(request->config_items, PW_CRYPT_PASSWORD, 0)) {
+ DEBUG("WARNING: No \"known good\" password was found in LDAP. Are you sure that the user is configured correctly?");
+ }
+ }
+}
+
+
+/******************************************************************************
*
- * Detach from the LDAP server and cleanup internal state.
+ * Function: ldap_authorize
*
- *****************************************************************************/
-static int
-ldap_detach(void *instance)
+ * Purpose: Check if user is authorized for remote access
+ *
+ ******************************************************************************/
+static int ldap_authorize(void *instance, REQUEST * request)
{
- ldap_instance *inst = instance;
- TLDAP_RADIUS *pair, *nextpair;
+ int rcode, did_work;
+ int module_rcode = RLM_MODULE_NOOP;
+ ldap_instance *inst = instance;
+ char *user_dn;
+ char **vals;
+ VALUE_PAIR *vp;
+ LDAP_CONN *conn;
+ LDAPMessage *result, *msg;
+ char filter[MAX_FILTER_STR_LEN];
+ char basedn[MAX_FILTER_STR_LEN];
- if (inst->conns) {
- int i;
+ did_work = FALSE; /* for debugging user problems */
- for (i = 0;i < inst->num_conns; i++) {
- if (inst->conns[i].locked) return -1;
+ if (!request->username) {
+ RDEBUG2("Attribute \"User-Name\" is required for authorization.\n");
+ return RLM_MODULE_NOOP;
+ }
- if (inst->conns[i].ld){
- ldap_unbind_s(inst->conns[i].ld);
- }
- pthread_mutex_destroy(&inst->conns[i].mutex);
- }
- free(inst->conns);
+ /*
+ * Check for valid input, zero length names not permitted
+ */
+ if (request->username->length == 0) {
+ RDEBUG2("zero length username not permitted\n");
+ return RLM_MODULE_INVALID;
}
-#ifdef NOVELL
- if (inst->apc_conns){
- int i;
+ if (!radius_xlat(filter, sizeof(filter), inst->filter,
+ request, ldap_escape_func)) {
+ radlog(L_ERR, " [%s] Failed creating filter.\n", inst->xlat_name);
+ return RLM_MODULE_INVALID;
+ }
+
+ if (!radius_xlat(basedn, sizeof(basedn), inst->basedn,
+ request, ldap_escape_func)) {
+ radlog(L_ERR, " [%s] Failed creating basedn.\n", inst->xlat_name);
+ return RLM_MODULE_INVALID;
+ }
- for (i = 0; i < inst->num_conns; i++) {
- if (inst->apc_conns[i].locked) return -1;
+ conn = ldap_get_socket(inst);
+ if (!conn) return RLM_MODULE_FAIL;
- if (inst->apc_conns[i].ld){
- ldap_unbind_s(inst->apc_conns[i].ld);
- }
- pthread_mutex_destroy(&inst->apc_conns[i].mutex);
+ rcode = perform_search(inst, &conn, basedn, LDAP_SCOPE_SUBTREE, filter,
+ inst->attrs, &result);
+ if (rcode < 0) {
+ if (rcode == -2) {
+ module_failure_msg(&request->packet->vps,
+ "[%s] Search returned not found",
+ inst->xlat_name);
+ DEBUG(" [%s] Search returned not found", inst->xlat_name);
+ module_rcode = RLM_MODULE_NOTFOUND;
+ goto free_socket;
}
- free(inst->apc_conns);
+ DEBUG(" [%s] Search returned error", inst->xlat_name);
+ goto free_socket;
}
-#endif
- pair = inst->check_item_map;
+ msg = ldap_first_entry(conn->ld, result);
+ if (!msg) {
+ RDEBUG2("ldap_first_entry() failed");
+ goto free_result;
+ }
- while (pair != NULL) {
- nextpair = pair->next;
- free(pair->attr);
- free(pair->radius_attr);
- free(pair);
- pair = nextpair;
+ user_dn = ldap_get_dn(conn->ld, msg);
+ if (!user_dn) {
+ RDEBUG2("ldap_get_dn() failed");
+ goto free_result;
}
- pair = inst->reply_item_map;
+ /*
+ * Adding attribute containing the Users' DN.
+ */
+ pairadd(&request->config_items, pairmake("Ldap-UserDn", user_dn, T_OP_EQ));
+ ldap_memfree(user_dn);
+
+ /*
+ * Check for access.
+ */
+ if (inst->access_attr) {
+ did_work = TRUE;
- while (pair != NULL) {
- nextpair = pair->next;
- free(pair->attr);
- free(pair->radius_attr);
- free(pair);
- pair = nextpair;
+ if (check_access(inst, conn, msg) < 0) {
+ module_rcode = RLM_MODULE_USERLOCK;
+ goto free_result;
+ }
}
- if (inst->atts)
- free(inst->atts);
-
- paircompare_unregister(PW_LDAP_GROUP, ldap_groupcmp);
- xlat_unregister(inst->xlat_name,ldap_xlat, instance);
- free(inst->xlat_name);
+ /*
+ * Apply ONE user profile, or a default user profile.
+ */
+ vp = pairfind(request->config_items, PW_USER_PROFILE, 0);
+ if (vp || inst->default_profile) {
+ char *profile = inst->default_profile;
- free(inst);
+ if (vp) profile = vp->vp_strvalue;
- return 0;
-}
+ did_work = TRUE;
+ apply_profile(inst, &conn, request, profile);
+ }
+ /*
+ * Apply a SET of user profiles.
+ */
+ if (inst->profile_attr &&
+ (vals = ldap_get_values(conn->ld, msg, inst->profile_attr)) != NULL) {
-#ifdef FIELDCPY
-static void
-fieldcpy(char *string, char **uptr)
-{
- char *ptr;
+ int i;
- ptr = *uptr;
- while (*ptr == ' ' || *ptr == '\t') {
- ptr++;
- }
- if (*ptr == '"') {
- ptr++;
- while (*ptr != '"' && *ptr != '\0' && *ptr != '\n') {
- *string++ = *ptr++;
- }
- *string = '\0';
- if (*ptr == '"') {
- ptr++;
+ for (i = 0; (vals[i] != NULL) && (*vals[i] != '\0'); i++) {
+ apply_profile(inst, &conn, request, vals[i]);
}
- *uptr = ptr;
- return;
+
+ did_work = TRUE;
+ ldap_value_free(vals);
}
- while (*ptr != ' ' && *ptr != '\t' && *ptr != '\0' && *ptr != '\n' &&
- *ptr != '=' && *ptr != ',') {
- *string++ = *ptr++;
+
+ if (inst->map_file) {
+ did_work = TRUE;
+ do_check_reply(inst, conn->ld, request, msg);
}
- *string = '\0';
- *uptr = ptr;
- return;
+
+ if (!did_work) {
+ RDEBUG("WARNING: The module did NOTHING in the 'authorize' section. Why is it listed?");
+ RDEBUG("WARNING: You can probably delete '%s' from 'authorize'",
+ inst->xlat_name);
+ }
+
+free_result:
+ ldap_msgfree(result);
+free_socket:
+ ldap_release_socket(inst, conn);
+
+ return module_rcode;
}
-#endif
-/*
- * Copied from src/lib/token.c
- */
-static const FR_NAME_NUMBER tokens[] = {
- { "=~", T_OP_REG_EQ, }, /* order is important! */
- { "!~", T_OP_REG_NE, },
- { "{", T_LCBRACE, },
- { "}", T_RCBRACE, },
- { "(", T_LBRACE, },
- { ")", T_RBRACE, },
- { ",", T_COMMA, },
- { "+=", T_OP_ADD, },
- { "-=", T_OP_SUB, },
- { ":=", T_OP_SET, },
- { "=*", T_OP_CMP_TRUE, },
- { "!*", T_OP_CMP_FALSE, },
- { "==", T_OP_CMP_EQ, },
- { "=", T_OP_EQ, },
- { "!=", T_OP_NE, },
- { ">=", T_OP_GE, },
- { ">", T_OP_GT, },
- { "<=", T_OP_LE, },
- { "<", T_OP_LT, },
- { NULL, 0}
-};
/*****************************************************************************
- * Get RADIUS attributes from LDAP object
- * ( according to draft-adoba-radius-05.txt
- * <http://www.ietf.org/internet-drafts/draft-adoba-radius-05.txt> )
+ *
+ * Function: ldap_authenticate
+ *
+ * Purpose: Check the user's password against ldap database
*
*****************************************************************************/
-static VALUE_PAIR *ldap_pairget(LDAP *ld, LDAPMessage *entry,
- TLDAP_RADIUS *item_map,
- VALUE_PAIR **pairs, int is_check,
- ldap_instance *inst)
+static int ldap_authenticate(void *instance, REQUEST * request)
{
- char **vals;
- int vals_count;
- int vals_idx;
- const char *ptr;
- const char *value;
- TLDAP_RADIUS *element;
- FR_TOKEN token, operator;
- int is_generic_attribute;
- char buf[MAX_STRING_LEN];
- VALUE_PAIR *pairlist = NULL;
- VALUE_PAIR *newpair = NULL;
- char do_xlat = FALSE;
- char print_buffer[2048];
+ int module_rcode;
+ const char *user_dn;
+ ldap_instance *inst = instance;
+ LDAP_CONN *conn;
/*
- * check if there is a mapping from this LDAP attribute
- * to a RADIUS attribute
+ * Ensure that we're being passed a plain-text password, and not
+ * anything else.
*/
- for (element = item_map; element != NULL; element = element->next) {
- /*
- * No mapping, skip it.
- */
- if ((vals = ldap_get_values(ld,entry,element->attr)) == NULL)
- continue;
- /*
- * Check whether this is a one-to-one-mapped ldap
- * attribute or a generic attribute and set flag
- * accordingly.
- */
- if (strcasecmp(element->radius_attr, GENERIC_ATTRIBUTE_ID)==0)
- is_generic_attribute = 1;
- else
- is_generic_attribute = 0;
+ if (!request->username) {
+ radlog(L_AUTH, " [%s] Attribute \"User-Name\" is required for authentication.", inst->xlat_name);
+ return RLM_MODULE_INVALID;
+ }
- /*
- * Find out how many values there are for the
- * attribute and extract all of them.
- */
- vals_count = ldap_count_values(vals);
-
- for (vals_idx = 0; vals_idx < vals_count; vals_idx++) {
- value = vals[vals_idx];
-
- if (is_generic_attribute) {
- /*
- * This is a generic attribute.
- */
- FR_TOKEN dummy; /* makes pairread happy */
-
- /* not sure if using pairread here is ok ... */
- if ( (newpair = pairread(&value, &dummy)) != NULL) {
- DEBUG(" [%s] extracted attribute %s from generic item %s", inst->xlat_name,
- newpair->name, vals[vals_idx]);
- pairadd(&pairlist, newpair);
- } else {
- radlog(L_ERR, " [%s] parsing %s failed: %s", inst->xlat_name,
- element->attr, vals[vals_idx]);
- }
- } else {
- /*
- * This is a one-to-one-mapped attribute
- */
- ptr = value;
- operator = gettoken(&ptr, buf, sizeof(buf));
- if (operator < T_EQSTART || operator > T_EQEND) {
- /* no leading operator found */
- if (element->operator != T_OP_INVALID)
- operator = element->operator;
- else if (is_check)
- operator = T_OP_CMP_EQ;
- else
- operator = T_OP_EQ;
- } else {
- /* the value is after the operator */
- value = ptr;
- }
-
- /*
- * Do xlat if the *entire* string
- * is quoted.
- */
- if ((value[0] == '\'' || value[0] == '"' ||
- value[0] == '`') &&
- (value[0] == value[strlen(value)-1])) {
- ptr = value;
- token = gettoken(&ptr, buf, sizeof(buf));
- switch (token) {
- /* take the unquoted string */
- case T_SINGLE_QUOTED_STRING:
- case T_DOUBLE_QUOTED_STRING:
- value = buf;
- break;
-
- /* the value will be xlat'ed later */
- case T_BACK_QUOTED_STRING:
- value = buf;
- do_xlat = TRUE;
- break;
-
- /* keep the original string */
- default:
- break;
- }
- }
- if (value[0] == '\0') {
- DEBUG(" [%s] Attribute %s has no value", inst->xlat_name, element->attr);
- continue;
- }
-
- /*
- * Create the pair.
- */
- if (do_xlat) {
- newpair = pairmake_xlat(element->radius_attr,
- value,
- operator);
- } else {
- newpair = pairmake(element->radius_attr,
- value,
- operator);
- }
- if (newpair == NULL) {
- radlog(L_ERR, " [%s] Failed to create the pair: %s", inst->xlat_name, fr_strerror());
- continue;
- }
-
- vp_prints(print_buffer, sizeof(print_buffer),
- newpair);
- DEBUG(" [%s] %s -> %s", inst->xlat_name,
- element->attr, print_buffer);
-
-
- /*
- * Add the pair into the packet.
- */
- if (!vals_idx){
- pairdelete(pairs, newpair->attribute, newpair->vendor, newpair->flags.tag);
- }
- pairadd(&pairlist, newpair);
- }
- }
- ldap_value_free(vals);
+ if (!request->password) {
+ radlog(L_AUTH, " [%s] Attribute \"User-Password\" is required for authentication.", inst->xlat_name);
+ RDEBUG2(" You seem to have set \"Auth-Type := LDAP\" somewhere.");
+ RDEBUG2(" *******************************************************");
+ RDEBUG2(" * THAT CONFIGURATION IS WRONG. DELETE IT.");
+ RDEBUG2(" * YOU ARE PREVENTING THE SERVER FROM WORKING PROPERLY.");
+ RDEBUG2(" *******************************************************");
+ return RLM_MODULE_INVALID;
+ }
+
+ if (request->password->attribute != PW_USER_PASSWORD) {
+ radlog(L_AUTH, " [%s] Attribute \"User-Password\" is required for authentication. Cannot use \"%s\".", inst->xlat_name, request->password->name);
+ return RLM_MODULE_INVALID;
+ }
+
+ if (request->password->length == 0) {
+ module_failure_msg(&request->packet->vps,
+ "[%s] empty password supplied", inst->xlat_name);
+ return RLM_MODULE_INVALID;
+ }
+
+ conn = ldap_get_socket(inst);
+ if (!conn) return RLM_MODULE_FAIL;
+
+ RDEBUG("login attempt by \"%s\" with password \"%s\"",
+ request->username->vp_strvalue, request->password->vp_strvalue);
+
+ /*
+ * Get the DN by doing a search.
+ */
+ user_dn = get_userdn(&conn, request, &module_rcode);
+ if (!user_dn) {
+ ldap_release_socket(inst, conn);
+ return module_rcode;
+ }
+
+ /*
+ * Bind as the user
+ */
+ conn->rebound = TRUE;
+ module_rcode = ldap_bind_wrapper(&conn, user_dn,
+ request->password->vp_strvalue,
+ NULL, TRUE);
+ if (module_rcode == RLM_MODULE_OK) {
+ RDEBUG(" [%s] Bind as user '%s' was successful", inst->xlat_name,
+ user_dn);
}
- return (pairlist);
+ ldap_release_socket(inst, conn);
+ return module_rcode;
}
+
/* globally exported name */
module_t rlm_ldap = {
RLM_MODULE_INIT,
- "LDAP",
+ "ldap",
RLM_TYPE_THREAD_SAFE, /* type: reserved */
ldap_instantiate, /* instantiation */
ldap_detach, /* detach */
NULL, /* checksimul */
NULL, /* pre-proxy */
NULL, /* post-proxy */
-#ifdef NOVELL
- ldap_postauth /* post-auth */
-#else
NULL
-#endif
},
};