-# $Id$\r
-#\r
-# FreeRADIUS rlm_sqlippool SQL Queries for the Oracle Dialect\r
-\r
-allocate-begin = "commit"\r
-start-begin = "commit"\r
-alive-begin = "commit"\r
-stop-begin = "commit"\r
-on-begin = "commit"\r
-off-begin = "commit"\r
-\r
- ## This query allocates an IP address from the Pool\r
- ## The ORDER BY clause of this query tries to allocate the same IP-address\r
- ## to the user that they had last session...\r
- #allocate-find = "SELECT framedipaddress FROM ${ippool_table} \\r
- # WHERE pool_name = '%{control:Pool-Name}' AND expiry_time < current_timestamp \\r
- # ORDER BY (username <> '%{SQL-User-Name}'), \\r
- # (callingstationid <> '%{Calling-Station-Id}'), expiry_time \\r
- # LIMIT 1 \\r
- # FOR UPDATE"\r
-\r
- ## This function is available if you want to use multiple pools\r
- allocate-find = "select msqlippool('%{SQL-User-Name}','%{control:Pool-Name}') from dual"\r
-\r
- ## If you prefer to allocate a random IP address every time, use this query instead\r
- #allocate-find = "SELECT framedipaddress FROM ${ippool_table} \\r
- # WHERE pool_name = '%{control:Pool-Name}' AND expiry_time < current_timestamp \\r
- # ORDER BY RANDOM() \\r
- # LIMIT 1 \\r
- # FOR UPDATE"\r
-\r
-\r
- ## If an IP could not be allocated, check to see whether the pool exists or not\r
- ## This allows the module to differentiate between a full pool and no pool\r
- ## Note: If you are not running redundant pool modules this query may be commented\r
- ## out to save running this query every time an ip is not allocated.\r
- pool-check = "SELECT id FROM (SELECT id FROM ${ippool_table} \\r
- WHERE pool_name='%{control:Pool-Name}') WHERE ROWNUM = 1"\r
-\r
- \r
- ## This query marks the IP address handed out by "allocate-find" as used\r
- ## for the period of "lease-duration" after which time it may be reused.\r
- allocate-update = "UPDATE ${ippool_table} \\r
- SET nasipaddress = '%{NAS-IP-Address}', pool_key = '${pool-key}', \\r
- callingstationid = '%{Calling-Station-Id}', username = '%{SQL-User-Name}', \\r
- expiry_time = current_timestamp + INTERVAL '${lease-duration}' second(1) \\r
- WHERE framedipaddress = '%I'"\r
-\r
-\r
- ## This query frees the IP address assigned to "pool-key" when a new request\r
- ## comes in for the same "pool-key". This means that either you are losing\r
- ## accounting Stop records or you use Calling-Station-Id instead of NAS-Port\r
- ## as your "pool-key" and your users are able to reconnect before your NAS\r
- ## has timed out their previous session. (Generally on wireless networks)\r
- ## (Note: If your pool-key is set to Calling-Station-Id and not NAS-Port\r
- ## then you may wish to delete the "AND nasipaddress = '%{Nas-IP-Address}'\r
- ## from the WHERE clause)\r
- allocate-clear = "UPDATE ${ippool_table} \\r
- SET nasipaddress = '', pool_key = 0, callingstationid = '', \\r
- expiry_time = current_timestamp - INTERVAL '1' second(1) \\r
- WHERE pool_key = '${pool-key}'"\r
-\r
-\r
- ## This query extends an IP address lease by "lease-duration" when an accounting\r
- ## START record arrives\r
- start-update = "UPDATE ${ippool_table} \\r
- SET expiry_time = current_timestamp + INTERVAL '${lease-duration}' second(1) \\r
- WHERE nasipaddress = '%{NAS-IP-Address}' \\r
- AND pool_key = '${pool-key}'"\r
-\r
-\r
- ## This query frees an IP address when an accounting\r
- ## STOP record arrives\r
- stop-clear = "UPDATE ${ippool_table} \\r
- SET nasipaddress = '', pool_key = 0, callingstationid = '', \\r
- expiry_time = current_timestamp - INTERVAL '1' second(1) \\r
- WHERE nasipaddress = '%{Nas-IP-Address}' \\r
- AND pool_key = '${pool-key}' \\r
- AND username = '%{SQL-User-Name}' \\r
- AND callingstationid = '%{Calling-Station-Id}'"\r
-\r
-\r
- ## This query extends an IP address lease by "lease-duration" when an accounting\r
- ## ALIVE record arrives\r
- alive-update = "UPDATE ${ippool_table} \\r
- SET expiry_time = current_timestamp + INTERVAL '${lease-duration}' second(1) \\r
- WHERE nasipaddress = '%{Nas-IP-Address}' \\r
- AND pool_key = '${pool-key}' \\r
- AND framedipaddress = '%{Framed-IP-Address}' \\r
- AND username = '%{SQL-User-Name}' \\r
- AND callingstationid = '%{Calling-Station-Id}'" \r
-\r
-\r
- ## This query frees all IP addresses allocated to a NAS when an\r
- ## accounting ON record arrives from that NAS\r
- on-clear = "UPDATE ${ippool_table} \\r
- SET nasipaddress = '', pool_key = 0, callingstationid = '', \\r
- expiry_time = current_timestamp - INTERVAL '1' second(1) \\r
- WHERE nasipaddress = '%{Nas-IP-Address}'"\r
-\r
-\r
- ## This query frees all IP addresses allocated to a NAS when an\r
- ## accounting OFF record arrives from that NAS\r
- off-clear = "UPDATE ${ippool_table} \\r
- SET nasipaddress = '', pool_key = 0, callingstationid = '', \\r
- expiry_time = current_timestamp - INTERVAL '1' second(1) \\r
- WHERE nasipaddress = '%{Nas-IP-Address}'"\r
-\r
+# -*- text -*-
+##
+## ippool.conf -- Oracle queries for rlm_sqlippool
+##
+## $Id$
+
+allocate-begin = "commit"
+start-begin = "commit"
+alive-begin = "commit"
+stop-begin = "commit"
+on-begin = "commit"
+off-begin = "commit"
+
+ ## This query allocates an IP address from the Pool
+ ## The ORDER BY clause of this query tries to allocate the same IP-address
+ ## to the user that they had last session...
+ #allocate-find = "SELECT framedipaddress FROM ${ippool_table} \
+ # WHERE pool_name = '%{control:Pool-Name}' AND expiry_time < current_timestamp \
+ # ORDER BY (username <> '%{SQL-User-Name}'), \
+ # (callingstationid <> '%{Calling-Station-Id}'), expiry_time \
+ # LIMIT 1 \
+ # FOR UPDATE"
+
+ ## This function is available if you want to use multiple pools
+ allocate-find = "select msqlippool('%{SQL-User-Name}','%{control:Pool-Name}') from dual"
+
+ ## If you prefer to allocate a random IP address every time, use this query instead
+ #allocate-find = "SELECT framedipaddress FROM ${ippool_table} \
+ # WHERE pool_name = '%{control:Pool-Name}' AND expiry_time < current_timestamp \
+ # ORDER BY RANDOM() \
+ # LIMIT 1 \
+ # FOR UPDATE"
+
+
+ ## If an IP could not be allocated, check to see whether the pool exists or not
+ ## This allows the module to differentiate between a full pool and no pool
+ ## Note: If you are not running redundant pool modules this query may be commented
+ ## out to save running this query every time an ip is not allocated.
+ pool-check = "SELECT id FROM (SELECT id FROM ${ippool_table} \
+ WHERE pool_name='%{control:Pool-Name}') WHERE ROWNUM = 1"
+
+
+ ## This query marks the IP address handed out by "allocate-find" as used
+ ## for the period of "lease-duration" after which time it may be reused.
+ allocate-update = "UPDATE ${ippool_table} \
+ SET nasipaddress = '%{NAS-IP-Address}', pool_key = '${pool-key}', \
+ callingstationid = '%{Calling-Station-Id}', username = '%{SQL-User-Name}', \
+ expiry_time = current_timestamp + INTERVAL '${lease-duration}' second(1) \
+ WHERE framedipaddress = '%I'"
+
+
+ ## This query frees the IP address assigned to "pool-key" when a new request
+ ## comes in for the same "pool-key". This means that either you are losing
+ ## accounting Stop records or you use Calling-Station-Id instead of NAS-Port
+ ## as your "pool-key" and your users are able to reconnect before your NAS
+ ## has timed out their previous session. (Generally on wireless networks)
+ ## (Note: If your pool-key is set to Calling-Station-Id and not NAS-Port
+ ## then you may wish to delete the "AND nasipaddress = '%{Nas-IP-Address}'
+ ## from the WHERE clause)
+ allocate-clear = "UPDATE ${ippool_table} \
+ SET nasipaddress = '', pool_key = 0, callingstationid = '', \
+ expiry_time = current_timestamp - INTERVAL '1' second(1) \
+ WHERE pool_key = '${pool-key}'"
+
+
+ ## This query extends an IP address lease by "lease-duration" when an accounting
+ ## START record arrives
+ start-update = "UPDATE ${ippool_table} \
+ SET expiry_time = current_timestamp + INTERVAL '${lease-duration}' second(1) \
+ WHERE nasipaddress = '%{NAS-IP-Address}' \
+ AND pool_key = '${pool-key}'"
+
+
+ ## This query frees an IP address when an accounting
+ ## STOP record arrives
+ stop-clear = "UPDATE ${ippool_table} \
+ SET nasipaddress = '', pool_key = 0, callingstationid = '', \
+ expiry_time = current_timestamp - INTERVAL '1' second(1) \
+ WHERE nasipaddress = '%{Nas-IP-Address}' \
+ AND pool_key = '${pool-key}' \
+ AND username = '%{SQL-User-Name}' \
+ AND callingstationid = '%{Calling-Station-Id}'"
+
+
+ ## This query extends an IP address lease by "lease-duration" when an accounting
+ ## ALIVE record arrives
+ alive-update = "UPDATE ${ippool_table} \
+ SET expiry_time = current_timestamp + INTERVAL '${lease-duration}' second(1) \
+ WHERE nasipaddress = '%{Nas-IP-Address}' \
+ AND pool_key = '${pool-key}' \
+ AND framedipaddress = '%{Framed-IP-Address}' \
+ AND username = '%{SQL-User-Name}' \
+ AND callingstationid = '%{Calling-Station-Id}'"
+
+
+ ## This query frees all IP addresses allocated to a NAS when an
+ ## accounting ON record arrives from that NAS
+ on-clear = "UPDATE ${ippool_table} \
+ SET nasipaddress = '', pool_key = 0, callingstationid = '', \
+ expiry_time = current_timestamp - INTERVAL '1' second(1) \
+ WHERE nasipaddress = '%{Nas-IP-Address}'"
+
+
+ ## This query frees all IP addresses allocated to a NAS when an
+ ## accounting OFF record arrives from that NAS
+ off-clear = "UPDATE ${ippool_table} \
+ SET nasipaddress = '', pool_key = 0, callingstationid = '', \
+ expiry_time = current_timestamp - INTERVAL '1' second(1) \
+ WHERE nasipaddress = '%{Nas-IP-Address}'"
+
projects / freeradius.git / commitdiff