nl80211: Sync with wireless-testing.git linux/nl80211.h

Signed-hostap: Jouni Malinen <j@w1.fi>

diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index 9d797f2..f9261c2 100644 (file)
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -509,6 +509,35 @@
  * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
  * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
  *
+ * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
+ *     (or GO) interface (i.e. hostapd) to ask for unexpected frames to
+ *     implement sending deauth to stations that send unexpected class 3
+ *     frames. Also used as the event sent by the kernel when such a frame
+ *     is received.
+ *     For the event, the %NL80211_ATTR_MAC attribute carries the TA and
+ *     other attributes like the interface index are present.
+ *     If used as the command it must have an interface index and you can
+ *     only unsubscribe from the event by closing the socket. Subscription
+ *     is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
+ *
+ * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
+ *     associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
+ *     and wasn't already in a 4-addr VLAN. The event will be sent similarly
+ *     to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
+ *
+ * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
+ *     by sending a null data frame to it and reporting when the frame is
+ *     acknowleged. This is used to allow timing out inactive clients. Uses
+ *     %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
+ *     direct reply with an %NL80211_ATTR_COOKIE that is later used to match
+ *     up the event with the request. The event includes the same data and
+ *     has %NL80211_ATTR_ACK set if the frame was ACKed.
+ *
+ * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
+ *     other BSSes when any interfaces are in AP mode. This helps implement
+ *     OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
+ *     messages. Note that per PHY only one application may register.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -638,6 +667,14 @@ enum nl80211_commands {
        NL80211_CMD_TDLS_OPER,
        NL80211_CMD_TDLS_MGMT,
 
+       NL80211_CMD_UNEXPECTED_FRAME,
+
+       NL80211_CMD_PROBE_CLIENT,
+
+       NL80211_CMD_REGISTER_BEACONS,
+
+       NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
+
        /* add new commands above here */
 
        /* used to define NL80211_CMD_MAX below */
@@ -658,6 +695,8 @@ enum nl80211_commands {
 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
 #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
 
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
 /* source-level API compatibility */
 #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
 #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
@@ -1109,6 +1148,28 @@ enum nl80211_commands {
  *     %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
  *     used for asking the driver to perform a TDLS operation.
  *
+ * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
+ *     that have AP support to indicate that they have the AP SME integrated
+ *     with support for the features listed in this attribute, see
+ *     &enum nl80211_ap_sme_features.
+ *
+ * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
+ *     the driver to not wait for an acknowledgement. Note that due to this,
+ *     it will also not give a status callback nor return a cookie. This is
+ *     mostly useful for probe responses to save airtime.
+ *
+ * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
+ *     &enum nl80211_feature_flags and is advertised in wiphy information.
+ * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
+ *
+ *     requests while operating in AP-mode.
+ *     This attribute holds a bitmap of the supported protocols for
+ *     offloading (see &enum nl80211_probe_resp_offload_support_attr).
+ *
+ * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+ *     probe-response frame. The DA field in the 802.11 header is zero-ed out,
+ *     to be filled by the FW.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1337,6 +1398,16 @@ enum nl80211_attrs {
        NL80211_ATTR_TDLS_SUPPORT,
        NL80211_ATTR_TDLS_EXTERNAL_SETUP,
 
+       NL80211_ATTR_DEVICE_AP_SME,
+
+       NL80211_ATTR_DONT_WAIT_FOR_ACK,
+
+       NL80211_ATTR_FEATURE_FLAGS,
+
+       NL80211_ATTR_PROBE_RESP_OFFLOAD,
+
+       NL80211_ATTR_PROBE_RESP,
+
        /* add attributes here, update the policy in nl80211.c */
 
        __NL80211_ATTR_AFTER_LAST,
@@ -1371,6 +1442,7 @@ enum nl80211_attrs {
 #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
 #define NL80211_ATTR_KEY NL80211_ATTR_KEY
 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
 
 #define NL80211_MAX_SUPP_RATES                 32
 #define NL80211_MAX_SUPP_REG_RULES             32
@@ -1548,6 +1620,7 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
  *     containing info as possible, see &enum nl80211_sta_bss_param
  * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
+ * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -1569,6 +1642,7 @@ enum nl80211_sta_info {
        NL80211_STA_INFO_RX_BITRATE,
        NL80211_STA_INFO_BSS_PARAM,
        NL80211_STA_INFO_CONNECTED_TIME,
+       NL80211_STA_INFO_STA_FLAGS,
 
        /* keep last */
        __NL80211_STA_INFO_AFTER_LAST,
@@ -2648,4 +2722,43 @@ enum nl80211_tdls_operation {
        NL80211_TDLS_DISABLE_LINK,
 };
 
+/*
+ * enum nl80211_ap_sme_features - device-integrated AP features
+ * Reserved for future use, no bits are defined in
+ * NL80211_ATTR_DEVICE_AP_SME yet.
+enum nl80211_ap_sme_features {
+};
+ */
+
+/**
+ * enum nl80211_feature_flags - device/driver features
+ * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
+ *     TX status to the socket error queue when requested with the
+ *     socket option.
+ */
+enum nl80211_feature_flags {
+       NL80211_FEATURE_SK_TX_STATUS    = 1 << 0,
+};
+
+/**
+ * enum nl80211_probe_resp_offload_support_attr - optional supported
+ *     protocols for probe-response offloading by the driver/FW.
+ *     To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
+ *     Each enum value represents a bit in the bitmap of supported
+ *     protocols. Typically a subset of probe-requests belonging to a
+ *     supported protocol will be excluded from offload and uploaded
+ *     to the host.
+ *
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
+ */
+enum nl80211_probe_resp_offload_support_attr {
+       NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =        1<<0,
+       NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =       1<<1,
+       NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =        1<<2,
+       NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =     1<<3,
+};
+
 #endif /* __LINUX_NL80211_H */