# Test cases for HT operations with hostapd
-# Copyright (c) 2013, Jouni Malinen <j@w1.fi>
+# Copyright (c) 2013-2014, Jouni Malinen <j@w1.fi>
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
import logging
logger = logging.getLogger()
import struct
+import subprocess
import hostapd
dev[0].connect("test-ht40", key_mgmt="NONE", scan_freq=freq)
+def test_ap_ht40_scan_conflict(dev, apdev):
+ """HT40 co-ex scan conflict"""
+ params = { "ssid": "test-ht40",
+ "channel": "6",
+ "ht_capab": "[HT40+]"}
+ hostapd.add_ap(apdev[1]['ifname'], params)
+
+ params = { "ssid": "test-ht40",
+ "channel": "5",
+ "ht_capab": "[HT40-]"}
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False)
+
+ state = hapd.get_status_field("state")
+ if state != "HT_SCAN":
+ time.sleep(0.1)
+ state = hapd.get_status_field("state")
+ if state != "HT_SCAN":
+ raise Exception("Unexpected interface state - expected HT_SCAN")
+
+ ev = hapd.wait_event(["AP-ENABLED"], timeout=10)
+ if not ev:
+ raise Exception("AP setup timed out")
+
+ state = hapd.get_status_field("state")
+ if state != "ENABLED":
+ raise Exception("Unexpected interface state - expected ENABLED")
+
+ freq = hapd.get_status_field("freq")
+ if freq != "2432":
+ raise Exception("Unexpected frequency")
+ pri = hapd.get_status_field("channel")
+ if pri != "5":
+ raise Exception("Unexpected primary channel")
+ sec = hapd.get_status_field("secondary_channel")
+ if sec != "0":
+ raise Exception("Unexpected secondary channel: " + sec)
+
+ dev[0].connect("test-ht40", key_mgmt="NONE", scan_freq=freq)
+
+def test_ap_ht40_scan_match(dev, apdev):
+ """HT40 co-ex scan matching configuration"""
+ params = { "ssid": "test-ht40",
+ "channel": "5",
+ "ht_capab": "[HT40-]"}
+ hostapd.add_ap(apdev[1]['ifname'], params)
+
+ params = { "ssid": "test-ht40",
+ "channel": "5",
+ "ht_capab": "[HT40-]"}
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False)
+
+ state = hapd.get_status_field("state")
+ if state != "HT_SCAN":
+ time.sleep(0.1)
+ state = hapd.get_status_field("state")
+ if state != "HT_SCAN":
+ raise Exception("Unexpected interface state - expected HT_SCAN")
+
+ ev = hapd.wait_event(["AP-ENABLED"], timeout=10)
+ if not ev:
+ raise Exception("AP setup timed out")
+
+ state = hapd.get_status_field("state")
+ if state != "ENABLED":
+ raise Exception("Unexpected interface state - expected ENABLED")
+
+ freq = hapd.get_status_field("freq")
+ if freq != "2432":
+ raise Exception("Unexpected frequency")
+ pri = hapd.get_status_field("channel")
+ if pri != "5":
+ raise Exception("Unexpected primary channel")
+ sec = hapd.get_status_field("secondary_channel")
+ if sec != "-1":
+ raise Exception("Unexpected secondary channel: " + sec)
+
+ dev[0].connect("test-ht40", key_mgmt="NONE", scan_freq=freq)
+
+def test_ap_ht40_5ghz_match(dev, apdev):
+ """HT40 co-ex scan on 5 GHz with matching pri/sec channel"""
+ try:
+ params = { "ssid": "test-ht40",
+ "hw_mode": "a",
+ "channel": "36",
+ "country_code": "US",
+ "ht_capab": "[HT40+]"}
+ hostapd.add_ap(apdev[1]['ifname'], params)
+
+ params = { "ssid": "test-ht40",
+ "hw_mode": "a",
+ "channel": "36",
+ "ht_capab": "[HT40+]"}
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False)
+
+ state = hapd.get_status_field("state")
+ if state != "HT_SCAN":
+ time.sleep(0.1)
+ state = hapd.get_status_field("state")
+ if state != "HT_SCAN":
+ raise Exception("Unexpected interface state - expected HT_SCAN")
+
+ ev = hapd.wait_event(["AP-ENABLED"], timeout=10)
+ if not ev:
+ raise Exception("AP setup timed out")
+
+ state = hapd.get_status_field("state")
+ if state != "ENABLED":
+ raise Exception("Unexpected interface state - expected ENABLED")
+
+ freq = hapd.get_status_field("freq")
+ if freq != "5180":
+ raise Exception("Unexpected frequency")
+ pri = hapd.get_status_field("channel")
+ if pri != "36":
+ raise Exception("Unexpected primary channel")
+ sec = hapd.get_status_field("secondary_channel")
+ if sec != "1":
+ raise Exception("Unexpected secondary channel: " + sec)
+
+ dev[0].connect("test-ht40", key_mgmt="NONE", scan_freq=freq)
+ finally:
+ subprocess.call(['sudo', 'iw', 'reg', 'set', '00'])
+
+def test_ap_ht40_5ghz_switch(dev, apdev):
+ """HT40 co-ex scan on 5 GHz switching pri/sec channel"""
+ try:
+ params = { "ssid": "test-ht40",
+ "hw_mode": "a",
+ "channel": "36",
+ "country_code": "US",
+ "ht_capab": "[HT40+]"}
+ hostapd.add_ap(apdev[1]['ifname'], params)
+
+ params = { "ssid": "test-ht40",
+ "hw_mode": "a",
+ "channel": "40",
+ "ht_capab": "[HT40-]"}
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False)
+
+ state = hapd.get_status_field("state")
+ if state != "HT_SCAN":
+ time.sleep(0.1)
+ state = hapd.get_status_field("state")
+ if state != "HT_SCAN":
+ raise Exception("Unexpected interface state - expected HT_SCAN")
+
+ ev = hapd.wait_event(["AP-ENABLED"], timeout=10)
+ if not ev:
+ raise Exception("AP setup timed out")
+
+ state = hapd.get_status_field("state")
+ if state != "ENABLED":
+ raise Exception("Unexpected interface state - expected ENABLED")
+
+ freq = hapd.get_status_field("freq")
+ if freq != "5180":
+ raise Exception("Unexpected frequency: " + freq)
+ pri = hapd.get_status_field("channel")
+ if pri != "36":
+ raise Exception("Unexpected primary channel: " + pri)
+ sec = hapd.get_status_field("secondary_channel")
+ if sec != "1":
+ raise Exception("Unexpected secondary channel: " + sec)
+
+ dev[0].connect("test-ht40", key_mgmt="NONE", scan_freq=freq)
+ finally:
+ subprocess.call(['sudo', 'iw', 'reg', 'set', '00'])
+
+def test_ap_ht40_5ghz_switch2(dev, apdev):
+ """HT40 co-ex scan on 5 GHz switching pri/sec channel (2)"""
+ try:
+ params = { "ssid": "test-ht40",
+ "hw_mode": "a",
+ "channel": "36",
+ "country_code": "US",
+ "ht_capab": "[HT40+]"}
+ hostapd.add_ap(apdev[1]['ifname'], params)
+
+ id = dev[0].add_network()
+ dev[0].set_network(id, "mode", "2")
+ dev[0].set_network_quoted(id, "ssid", "wpas-ap-open")
+ dev[0].set_network(id, "key_mgmt", "NONE")
+ dev[0].set_network(id, "frequency", "5200")
+ dev[0].set_network(id, "scan_freq", "5200")
+ dev[0].select_network(id)
+ time.sleep(1)
+
+ params = { "ssid": "test-ht40",
+ "hw_mode": "a",
+ "channel": "40",
+ "ht_capab": "[HT40-]"}
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False)
+
+ state = hapd.get_status_field("state")
+ if state != "HT_SCAN":
+ time.sleep(0.1)
+ state = hapd.get_status_field("state")
+ if state != "HT_SCAN":
+ raise Exception("Unexpected interface state - expected HT_SCAN")
+
+ ev = hapd.wait_event(["AP-ENABLED"], timeout=10)
+ if not ev:
+ raise Exception("AP setup timed out")
+
+ state = hapd.get_status_field("state")
+ if state != "ENABLED":
+ raise Exception("Unexpected interface state - expected ENABLED")
+
+ freq = hapd.get_status_field("freq")
+ if freq != "5180":
+ raise Exception("Unexpected frequency: " + freq)
+ pri = hapd.get_status_field("channel")
+ if pri != "36":
+ raise Exception("Unexpected primary channel: " + pri)
+ sec = hapd.get_status_field("secondary_channel")
+ if sec != "1":
+ raise Exception("Unexpected secondary channel: " + sec)
+
+ dev[0].connect("test-ht40", key_mgmt="NONE", scan_freq=freq)
+ finally:
+ subprocess.call(['sudo', 'iw', 'reg', 'set', '00'])
+
def test_obss_scan(dev, apdev):
"""Overlapping BSS scan request"""
params = { "ssid": "obss-scan",