--- /dev/null
+#
+# Configuration for the SQL module, when using Oracle.
+#
+# The database schema is available at:
+#
+# src/modules/rlm_sql/drivers/rlm_sql_oracle/db_oracle.sql
+#
+# $Id$
+#
+sql {
+
+ # Database type
+ # Current supported are: rlm_sql_mysql, rlm_sql_postgresql,
+ # rlm_sql_iodbc, rlm_sql_oracle, rlm_sql_unixodbc, rlm_sql_freetds
+ driver = "rlm_sql_oracle"
+
+ # Connect info
+ server = "localhost"
+ login = "root"
+ password = "rootpass"
+
+ # Database table configuration
+ radius_db = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))"
+
+ # If you want both stop and start records logged to the
+ # same SQL table, leave this as is. If you want them in
+ # different tables, put the start table in acct_table1
+ # and stop table in acct_table2
+ acct_table1 = "radacct"
+ acct_table2 = "radacct"
+
+ authcheck_table = "radcheck"
+ authreply_table = "radreply"
+
+ groupcheck_table = "radgroupcheck"
+ groupreply_table = "radgroupreply"
+
+ usergroup_table = "usergroup"
+
+ # Remove stale session if checkrad does not see a double login
+ deletestalesessions = yes
+
+ # Print all SQL statements when in debug mode (-x)
+ sqltrace = no
+ sqltracefile = ${logdir}/sqltrace.sql
+
+ # number of sql connections to make to server
+ num_sql_socks = 5
+
+ # number of seconds to dely retrying on a failed database
+ # connection (per_socket)
+ connect_failure_retry_delay = 60
+
+ #######################################################################
+ # Query config: Username
+ #######################################################################
+ # This is the username that will get substituted, escaped, and added
+ # as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below
+ # everywhere a username substitution is needed so you you can be sure
+ # the username passed from the client is escaped properly.
+ #
+ # Uncomment the next line, if you want the sql_user_name to mean:
+ #
+ # Use Stripped-User-Name, if it's there.
+ # Else use User-Name, if it's there,
+ # Else use hard-coded string "DEFAULT" as the user name.
+ #sql_user_name = "%{Stripped-User-Name:-%{User-Name:-DEFAULT}}"
+ #
+ sql_user_name = "%{User-Name}"
+
+ #######################################################################
+ # Default profile
+ #######################################################################
+ # This is the default profile. It is found in SQL by group membership.
+ # That means that this profile must be a member of at least one group
+ # which will contain the corresponding check and reply items.
+ # This profile will be queried in the authorize section for every user.
+ # The point is to assign all users a default profile without having to
+ # manually add each one to a group that will contain the profile.
+ # The SQL module will also honor the User-Profile attribute. This
+ # attribute can be set anywhere in the authorize section (ie the users
+ # file). It is found exactly as the default profile is found.
+ # If it is set then it will *overwrite* the default profile setting.
+ # The idea is to select profiles based on checks on the incoming packets,
+ # not on user group membership. For example:
+ # -- users file --
+ # DEFAULT Service-Type == Outbound-User, User-Profile := "outbound"
+ # DEFAULT Service-Type == Framed-User, User-Profile := "framed"
+ #
+ # By default the default_user_profile is not set
+ #
+ #default_user_profile = "DEFAULT"
+ #
+ # Determines if we will query the default_user_profile or the User-Profile
+ # if the user is not found. If the profile is found then we consider the user
+ # found. By default this is set to 'no'.
+ #
+ #query_on_not_found = no
+
+
+ #######################################################################
+ # Authorization Queries
+ #######################################################################
+ # These queries compare the check items for the user
+ # in ${authcheck_table} and setup the reply items in
+ # ${authreply_table}. You can use any query/tables
+ # you want, but the return data for each row MUST
+ # be in the following order:
+ #
+ # 0. Row ID (currently unused)
+ # 1. UserName/GroupName
+ # 2. Item Attr Name
+ # 3. Item Attr Value
+ # 4. Item Attr Operation
+ #######################################################################
+ #
+ # WARNING: Oracle is case sensitive
+ #
+ # The main difference between MySQL and Oracle queries is the date format.
+ # You must use the TO_DATE function to transform the radius date format to
+ # the Oracle date format, and put NULL otherwise '0' in a void date field.
+ #
+ #######################################################################
+
+ authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM ${authcheck_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
+ authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM ${authreply_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
+
+ authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.op FROM ${groupcheck_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id"
+ authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.op FROM ${groupreply_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id"
+
+ #######################################################################
+ # Accounting Queries
+ #######################################################################
+ # accounting_onoff_query - query for Accounting On/Off packets
+ # accounting_update_query - query for Accounting update packets
+ # accounting_start_query - query for Accounting start packets
+ # accounting_start_query_alt - query for Accounting start packets
+ # (alternate in case first query fails)
+ # accounting_stop_query - query for Accounting stop packets
+ # accounting_stop_query_alt - query for Accounting start packets
+ # (alternate in case first query doesn't
+ # affect any existing rows in the table)
+ #######################################################################
+ accounting_onoff_query = "UPDATE ${acct_table1} SET AcctStopTime=TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctSessionTime=((TO_DATE('%S','yyyy-mm-dd hh24:mi:ss') - AcctStartTime)*86400), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time} WHERE AcctSessionTime=0 AND AcctStopTime IS NULL AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStartTime <= TO_DATE('%S','yyyy-mm-dd hh24:mi:ss')"
+
+ accounting_update_query = "UPDATE ${acct_table1} SET FramedIPAddress = '%{Framed-IP-Address}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
+
+ accounting_start_query = "INSERT into ${acct_table1} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
+
+ accounting_start_query_alt = "UPDATE ${acct_table1} SET AcctStartTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = IS NULL"
+
+ accounting_stop_query = "UPDATE ${acct_table2} SET AcctStopTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
+
+ accounting_stop_query_alt = "INSERT into ${acct_table2} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', NULL, TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
+
+ #######################################################################
+ # Simultaneous Use Checking Queries
+ #######################################################################
+ # simul_count_query - query for the number of current connections
+ # - If this is not defined, no simultaneouls use checking
+ # - will be performed by this module instance
+ # simul_verify_query - query to return details of current connections for verification
+ # - Leave blank or commented out to disable verification step
+ # - Note that the returned field order should not be changed.
+ #######################################################################
+
+ # Uncomment simul_count_query to enable simultaneous use checking
+ # simul_count_query = "SELECT COUNT(*) FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL"
+ simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL"
+
+ #######################################################################
+ # Group Membership Queries
+ #######################################################################
+ # group_membership_query - Check user group membership
+ #######################################################################
+
+ group_membership_query = "SELECT GroupName FROM ${usergroup_table} WHERE UserName='%{SQL-User-Name}'"
+}
projects / freeradius.git / commitdiff