Enhance manpage with use of emphasis instead of strong quote

The Debian package checker "lintian" was making noise about
wpa_supplicant.conf(5). It was caused by a line beginning with ', which is
apparently not liked by man(1).

I suggest the use of <emphasis>word</emphasis> where 'word' is used at the
moment.

Signed-off-by: Kel Modderman <kel@otaku42.de>

diff --git a/wpa_supplicant/doc/docbook/wpa_cli.sgml b/wpa_supplicant/doc/docbook/wpa_cli.sgml
index d55aee4..1fe98f4 100644 (file)
--- a/wpa_supplicant/doc/docbook/wpa_cli.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_cli.sgml
@@ -72,17 +72,18 @@
    case of OTP request, it includes the challenge from the
    authentication server.</para>
 
-    <para>The reply to these requests can be given with 'identity',
-    'password', and 'otp' commands. &lt;id&gt; needs to be copied from the
-    the matching request. 'password' and 'otp' commands can be used
-    regardless of whether the request was for PASSWORD or OTP. The
-    main difference between these two commands is that values given
-    with 'password' are remembered as long as wpa_supplicant is
-    running whereas values given with 'otp' are used only once and
-    then forgotten, i.e., wpa_supplicant will ask frontend for a new
-    value for every use. This can be used to implement
-    one-time-password lists and generic token card -based
-    authentication.</para>
+    <para>The reply to these requests can be given with
+    <emphasis>identity</emphasis>, <emphasis>password</emphasis>, and
+    <emphasis>otp</emphasis> commands. &lt;id&gt; needs to be copied from
+    the matching request. <emphasis>password</emphasis> and
+    <emphasis>otp</emphasis> commands can be used regardless of whether
+    the request was for PASSWORD or OTP. The main difference between these
+    two commands is that values given with <emphasis>password</emphasis> are
+    remembered as long as wpa_supplicant is running whereas values given
+    with <emphasis>otp</emphasis> are used only once and then forgotten,
+    i.e., wpa_supplicant will ask frontend for a new value for every use.
+    This can be used to implement one-time-password lists and generic token
+    card -based authentication.</para>
 
     <para>Example request for password and a matching reply:</para>
 

diff --git a/wpa_supplicant/doc/docbook/wpa_priv.sgml b/wpa_supplicant/doc/docbook/wpa_priv.sgml
index 43a468c..89b8a92 100644 (file)
--- a/wpa_supplicant/doc/docbook/wpa_priv.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_priv.sgml
@@ -49,9 +49,9 @@
     <title>Example configuration</title>
 
     <para>The following steps are an example of how to configure
-    <command>wpa_priv</command> to allow users in the 'wpapriv' group
-    to communicate with <command>wpa_supplicant</command> with privilege
-    separation:</para>
+    <command>wpa_priv</command> to allow users in the
+    <emphasis>wpapriv</emphasis> group to communicate with
+    <command>wpa_supplicant</command> with privilege separation:</para>
 
     <para>Create user group (e.g., wpapriv) and assign users that
     should be able to use wpa_supplicant into that group.</para>
@@ -111,7 +111,7 @@ wpa_supplicant -i ath0 -c wpa_supplicant.conf
        supported <command>wpa_supplicant</command> driver backends is to be
        used. To get a list of supported driver types see wpa_supplicant help
        (e.g, wpa_supplicant -h). The driver backend supported by most good
-       drivers is 'wext'.</para>
+       drivers is <emphasis>wext</emphasis>.</para>
 
        <para>The &lt;ifname&gt; string specifies which network
        interface is to be managed by <command>wpa_supplicant</command>

diff --git a/wpa_supplicant/doc/docbook/wpa_supplicant.conf.sgml b/wpa_supplicant/doc/docbook/wpa_supplicant.conf.sgml
index 00bf6f5..ebefe11 100644 (file)
--- a/wpa_supplicant/doc/docbook/wpa_supplicant.conf.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_supplicant.conf.sgml
@@ -26,7 +26,7 @@
     <para>Changes to configuration file can be reloaded be sending
     SIGHUP signal to <command>wpa_supplicant</command> ('killall -HUP
     wpa_supplicant'). Similarly, reloading can be triggered with
-    the 'wpa_cli reconfigure' command.</para>
+    the <emphasis>wpa_cli reconfigure</emphasis> command.</para>
 
     <para>Configuration file can include one or more network blocks,
     e.g., one for each used SSID. wpa_supplicant will automatically
@@ -174,7 +174,7 @@ network={
 
       <listitem>
        <para>Authentication for wired Ethernet. This can be used with
-       'wired' interface (-Dwired on command line).</para>
+       <emphasis>wired</emphasis> interface (-Dwired on command line).</para>
 
 <blockquote><programlisting>
 ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel

diff --git a/wpa_supplicant/doc/docbook/wpa_supplicant.sgml b/wpa_supplicant/doc/docbook/wpa_supplicant.sgml
index 21c4951..52b62c3 100644 (file)
--- a/wpa_supplicant/doc/docbook/wpa_supplicant.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_supplicant.sgml
@@ -530,9 +530,9 @@ wpa_supplicant \
        snapshot/v0.2.x)</term>
        <listitem>
          <para> (http://hostap.epitest.fi/) Driver needs to be set in
-       Managed mode ('iwconfig wlan0 mode managed').  Please note
-       that station firmware version needs to be 1.7.0 or newer to
-       work in WPA mode.</para>
+         Managed mode (<emphasis>iwconfig wlan0 mode managed</emphasis>).
+         Please note that station firmware version needs to be 1.7.0 or
+         newer to work in WPA mode.</para>
        </listitem>
       </varlistentry>
 
@@ -736,8 +736,8 @@ wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -B
     <para>Add MODE="Managed" and WPA="y" to the network scheme in
     <filename>/etc/pcmcia/wireless.opts</filename>.</para>
 
-    <para>Add the following block to the end of 'start' action handler
-    in <filename>/etc/pcmcia/wireless</filename>:</para>
+    <para>Add the following block to the end of <emphasis>start</emphasis>
+    action handler in <filename>/etc/pcmcia/wireless</filename>:</para>
 
     <blockquote><programlisting>
 if [ "$WPA" = "y" -a -x /usr/local/bin/wpa_supplicant ]; then
@@ -746,8 +746,8 @@ fi
     </programlisting></blockquote>
 
 
-    <para>Add the following block to the end of 'stop' action handler
-    (may need to be separated from other actions) in
+    <para>Add the following block to the end of <emphasis>stop</emphasis>
+    action handler (may need to be separated from other actions) in
     <filename>/etc/pcmcia/wireless</filename>:</para>
 
     <blockquote><programlisting>