From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Thu, 8 Jan 2015 11:48:33 +0000 (+0100)
Subject: Make check_40mhz_5g common
X-Git-Tag: hostap_2_4~481
X-Git-Url: http://www.project-moonshot.org/gitweb/?a=commitdiff_plain;h=0e550fe49692d1e6dc9df7532e40d69d25687a96;p=mech_eap.git

Make check_40mhz_5g common

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
---

diff --git a/src/ap/hw_features.c b/src/ap/hw_features.c
index 72f919e..d629bbe 100644
--- a/src/ap/hw_features.c
+++ b/src/ap/hw_features.c
@@ -259,72 +259,18 @@ static void ieee80211n_get_pri_sec_chan(struct wpa_scan_res *bss,
 static int ieee80211n_check_40mhz_5g(struct hostapd_iface *iface,
 				     struct wpa_scan_results *scan_res)
 {
-	int pri_chan, sec_chan, pri_freq, sec_freq, pri_bss, sec_bss;
-	int bss_pri_chan, bss_sec_chan;
-	size_t i;
-	int match;
+	int pri_chan, sec_chan;
+	int res;
 
 	pri_chan = iface->conf->channel;
 	sec_chan = pri_chan + iface->conf->secondary_channel * 4;
-	pri_freq = hostapd_hw_get_freq(iface->bss[0], pri_chan);
-	if (iface->conf->secondary_channel > 0)
-		sec_freq = pri_freq + 20;
-	else
-		sec_freq = pri_freq - 20;
 
-	/*
-	 * Switch PRI/SEC channels if Beacons were detected on selected SEC
-	 * channel, but not on selected PRI channel.
-	 */
-	pri_bss = sec_bss = 0;
-	for (i = 0; i < scan_res->num; i++) {
-		struct wpa_scan_res *bss = scan_res->res[i];
-		if (bss->freq == pri_freq)
-			pri_bss++;
-		else if (bss->freq == sec_freq)
-			sec_bss++;
-	}
-	if (sec_bss && !pri_bss) {
-		wpa_printf(MSG_INFO, "Switch own primary and secondary "
-			   "channel to get secondary channel with no Beacons "
-			   "from other BSSes");
-		ieee80211n_switch_pri_sec(iface);
-		return 1;
-	}
+	res = check_40mhz_5g(iface->current_mode, scan_res, pri_chan, sec_chan);
 
-	/*
-	 * Match PRI/SEC channel with any existing HT40 BSS on the same
-	 * channels that we are about to use (if already mixed order in
-	 * existing BSSes, use own preference).
-	 */
-	match = 0;
-	for (i = 0; i < scan_res->num; i++) {
-		struct wpa_scan_res *bss = scan_res->res[i];
-		ieee80211n_get_pri_sec_chan(bss, &bss_pri_chan, &bss_sec_chan);
-		if (pri_chan == bss_pri_chan &&
-		    sec_chan == bss_sec_chan) {
-			match = 1;
-			break;
-		}
-	}
-	if (!match) {
-		for (i = 0; i < scan_res->num; i++) {
-			struct wpa_scan_res *bss = scan_res->res[i];
-			ieee80211n_get_pri_sec_chan(bss, &bss_pri_chan,
-						    &bss_sec_chan);
-			if (pri_chan == bss_sec_chan &&
-			    sec_chan == bss_pri_chan) {
-				wpa_printf(MSG_INFO, "Switch own primary and "
-					   "secondary channel due to BSS "
-					   "overlap with " MACSTR,
-					   MAC2STR(bss->bssid));
-				ieee80211n_switch_pri_sec(iface);
-				break;
-			}
-		}
-	}
+	if (res == 2)
+		ieee80211n_switch_pri_sec(iface);
 
-	return 1;
+	return !!res;
 }
 
 
diff --git a/src/common/hw_features_common.c b/src/common/hw_features_common.c
index 2343d1f..bb6e5db 100644
--- a/src/common/hw_features_common.c
+++ b/src/common/hw_features_common.c
@@ -166,3 +166,73 @@ void get_pri_sec_chan(struct wpa_scan_res *bss, int *pri_chan, int *sec_chan)
 		}
 	}
 }
+
+
+int check_40mhz_5g(struct hostapd_hw_modes *mode,
+		   struct wpa_scan_results *scan_res, int pri_chan,
+		   int sec_chan)
+{
+	int pri_freq, sec_freq, pri_bss, sec_bss;
+	int bss_pri_chan, bss_sec_chan;
+	size_t i;
+	int match;
+
+	if (!mode || !scan_res || !pri_chan || !sec_chan)
+		return 0;
+
+	if (pri_chan == sec_chan)
+		return 0;
+
+	pri_freq = hw_get_freq(mode, pri_chan);
+	sec_freq = hw_get_freq(mode, sec_chan);
+
+	/*
+	 * Switch PRI/SEC channels if Beacons were detected on selected SEC
+	 * channel, but not on selected PRI channel.
+	 */
+	pri_bss = sec_bss = 0;
+	for (i = 0; i < scan_res->num; i++) {
+		struct wpa_scan_res *bss = scan_res->res[i];
+		if (bss->freq == pri_freq)
+			pri_bss++;
+		else if (bss->freq == sec_freq)
+			sec_bss++;
+	}
+	if (sec_bss && !pri_bss) {
+		wpa_printf(MSG_INFO,
+			   "Switch own primary and secondary channel to get secondary channel with no Beacons from other BSSes");
+		return 2;
+	}
+
+	/*
+	 * Match PRI/SEC channel with any existing HT40 BSS on the same
+	 * channels that we are about to use (if already mixed order in
+	 * existing BSSes, use own preference).
+	 */
+	match = 0;
+	for (i = 0; i < scan_res->num; i++) {
+		struct wpa_scan_res *bss = scan_res->res[i];
+		get_pri_sec_chan(bss, &bss_pri_chan, &bss_sec_chan);
+		if (pri_chan == bss_pri_chan &&
+		    sec_chan == bss_sec_chan) {
+			match = 1;
+			break;
+		}
+	}
+	if (!match) {
+		for (i = 0; i < scan_res->num; i++) {
+			struct wpa_scan_res *bss = scan_res->res[i];
+			get_pri_sec_chan(bss, &bss_pri_chan, &bss_sec_chan);
+			if (pri_chan == bss_sec_chan &&
+			    sec_chan == bss_pri_chan) {
+				wpa_printf(MSG_INFO, "Switch own primary and "
+					   "secondary channel due to BSS "
+					   "overlap with " MACSTR,
+					   MAC2STR(bss->bssid));
+				return 2;
+			}
+		}
+	}
+
+	return 1;
+}
diff --git a/src/common/hw_features_common.h b/src/common/hw_features_common.h
index adba7d8..ed01d0a 100644
--- a/src/common/hw_features_common.h
+++ b/src/common/hw_features_common.h
@@ -23,5 +23,8 @@ int hw_get_chan(struct hostapd_hw_modes *mode, int freq);
 int allowed_ht40_channel_pair(struct hostapd_hw_modes *mode, int pri_chan,
 			      int sec_chan);
 void get_pri_sec_chan(struct wpa_scan_res *bss, int *pri_chan, int *sec_chan);
+int check_40mhz_5g(struct hostapd_hw_modes *mode,
+		   struct wpa_scan_results *scan_res, int pri_chan,
+		   int sec_chan);
 
 #endif /* HW_FEATURES_COMMON_H */