From: Michael Braun Date: Wed, 24 Feb 2016 11:53:10 +0000 (+0100) Subject: tests: RSN pre-auth and PMKSA caching with per_sta_vif X-Git-Tag: hostap_2_6~803 X-Git-Url: http://www.project-moonshot.org/gitweb/?a=commitdiff_plain;h=a12b30f2d464083b7576a77d1981800055ec49e8;p=mech_eap.git tests: RSN pre-auth and PMKSA caching with per_sta_vif This adds new tests to verify pmksa_cache_preauth when used with per_sta_vif and possibly vlans. While at it it refactors the code such that the tests pmksa_cache_preauth pmksa_cache_preauth_vlan_enabled pmksa_cache_preauth_vlan_used pmksa_cache_preauth_per_sta_vif pmksa_cache_preauth_vlan_enabled_per_sta_vif pmksa_cache_preauth_vlan_used_per_sta_vif share code where possible. Signed-off-by: Michael Braun --- diff --git a/tests/hwsim/hostapd.wlan3.vlan b/tests/hwsim/hostapd.wlan3.vlan index 3155e26..768fad7 100644 --- a/tests/hwsim/hostapd.wlan3.vlan +++ b/tests/hwsim/hostapd.wlan3.vlan @@ -1 +1,2 @@ 1 wlan3.1 +* wlan3.# diff --git a/tests/hwsim/hostapd.wlan4.vlan b/tests/hwsim/hostapd.wlan4.vlan index 75ac704..744e84f 100644 --- a/tests/hwsim/hostapd.wlan4.vlan +++ b/tests/hwsim/hostapd.wlan4.vlan @@ -1 +1,2 @@ 1 wlan4.1 +* wlan4.# diff --git a/tests/hwsim/test_pmksa_cache.py b/tests/hwsim/test_pmksa_cache.py index f26c240..c837c79 100644 --- a/tests/hwsim/test_pmksa_cache.py +++ b/tests/hwsim/test_pmksa_cache.py @@ -382,142 +382,31 @@ def test_pmksa_cache_and_cui(dev, apdev): if state != "COMPLETED": raise Exception("Reauthentication did not complete") -def test_pmksa_cache_preauth(dev, apdev): - """RSN pre-authentication to generate PMKSA cache entry""" +def generic_pmksa_cache_preauth(dev, apdev, extraparams, identity, databridge, + force_disconnect=False): + if not extraparams: + extraparams = [{}, {}] try: params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params['bridge'] = 'ap-br0' - hostapd.add_ap(apdev[0]['ifname'], params) - subprocess.call(['brctl', 'setfd', 'ap-br0', '0']) - subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'up']) - eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com", - password_hex="0123456789abcdef0123456789abcdef") - - params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") - params['bridge'] = 'ap-br0' - params['rsn_preauth'] = '1' - params['rsn_preauth_interfaces'] = 'ap-br0' - hostapd.add_ap(apdev[1]['ifname'], params) - bssid1 = apdev[1]['bssid'] - dev[0].scan(freq="2412") - success = False - status_seen = False - for i in range(0, 50): - if not status_seen: - status = dev[0].request("STATUS") - if "Pre-authentication EAPOL state machines:" in status: - status_seen = True - time.sleep(0.1) - pmksa = dev[0].get_pmksa(bssid1) - if pmksa: - success = True - break - if not success: - raise Exception("No PMKSA cache entry created from pre-authentication") - if not status_seen: - raise Exception("Pre-authentication EAPOL status was not available") - - dev[0].scan(freq="2412") - if "[WPA2-EAP-CCMP-preauth]" not in dev[0].request("SCAN_RESULTS"): - raise Exception("Scan results missing RSN element info") - dev[0].request("ROAM " + bssid1) - ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED", - "CTRL-EVENT-CONNECTED"], timeout=10) - if ev is None: - raise Exception("Roaming with the AP timed out") - if "CTRL-EVENT-EAP-STARTED" in ev: - raise Exception("Unexpected EAP exchange") - pmksa2 = dev[0].get_pmksa(bssid1) - if pmksa2 is None: - raise Exception("No PMKSA cache entry") - if pmksa['pmkid'] != pmksa2['pmkid']: - raise Exception("Unexpected PMKID change") - - finally: - subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'down']) - subprocess.call(['brctl', 'delbr', 'ap-br0']) - -def test_pmksa_cache_preauth_vlan_enabled(dev, apdev): - """RSN pre-authentication to generate PMKSA cache entry (dynamic_vlan optional but station without VLAN set)""" - try: - params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") - params['bridge'] = 'ap-br0' - params['dynamic_vlan'] = '1' - hostapd.add_ap(apdev[0]['ifname'], params) - subprocess.call(['brctl', 'setfd', 'ap-br0', '0']) - subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'up']) - eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com", - password_hex="0123456789abcdef0123456789abcdef") - - params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") - params['bridge'] = 'ap-br0' - params['rsn_preauth'] = '1' - params['rsn_preauth_interfaces'] = 'ap-br0' - params['dynamic_vlan'] = '1' - hostapd.add_ap(apdev[1]['ifname'], params) - bssid1 = apdev[1]['bssid'] - dev[0].scan(freq="2412") - success = False - status_seen = False - for i in range(0, 50): - if not status_seen: - status = dev[0].request("STATUS") - if "Pre-authentication EAPOL state machines:" in status: - status_seen = True - time.sleep(0.1) - pmksa = dev[0].get_pmksa(bssid1) - if pmksa: - success = True - break - if not success: - raise Exception("No PMKSA cache entry created from pre-authentication") - if not status_seen: - raise Exception("Pre-authentication EAPOL status was not available") - - dev[0].scan(freq="2412") - if "[WPA2-EAP-CCMP-preauth]" not in dev[0].request("SCAN_RESULTS"): - raise Exception("Scan results missing RSN element info") - dev[0].request("ROAM " + bssid1) - ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED", - "CTRL-EVENT-CONNECTED"], timeout=10) - if ev is None: - raise Exception("Roaming with the AP timed out") - if "CTRL-EVENT-EAP-STARTED" in ev: - raise Exception("Unexpected EAP exchange") - pmksa2 = dev[0].get_pmksa(bssid1) - if pmksa2 is None: - raise Exception("No PMKSA cache entry") - if pmksa['pmkid'] != pmksa2['pmkid']: - raise Exception("Unexpected PMKID change") + for key, value in extraparams[0].iteritems(): + params[key] = value - finally: - subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'down']) - subprocess.call(['brctl', 'delbr', 'ap-br0']) - -def test_pmksa_cache_preauth_vlan_used(dev, apdev): - """RSN pre-authentication to generate PMKSA cache entry (station with VLAN set)""" - try: - subprocess.call(['brctl', 'addbr', 'brvlan1']) - subprocess.call(['brctl', 'setfd', 'brvlan1', '0']) - params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") - params['bridge'] = 'ap-br0' - params['dynamic_vlan'] = '1' - params['vlan_file'] = 'hostapd.wlan3.vlan' hapd = hostapd.add_ap(apdev[0]['ifname'], params) subprocess.call(['brctl', 'setfd', 'ap-br0', '0']) subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'up']) - eap_connect(dev[0], apdev[0], "PAX", "vlan1", + eap_connect(dev[0], apdev[0], "PAX", identity, password_hex="0123456789abcdef0123456789abcdef") # Verify connectivity in the correct VLAN - hwsim_utils.test_connectivity_iface(dev[0], hapd, "brvlan1") + hwsim_utils.test_connectivity_iface(dev[0], hapd, databridge) params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap") params['bridge'] = 'ap-br0' params['rsn_preauth'] = '1' - params['rsn_preauth_interfaces'] = 'brvlan1' - params['dynamic_vlan'] = '1' - params['vlan_file'] = 'hostapd.wlan4.vlan' + params['rsn_preauth_interfaces'] = databridge + for key, value in extraparams[1].iteritems(): + params[key] = value hostapd.add_ap(apdev[1]['ifname'], params) bssid1 = apdev[1]['bssid'] dev[0].scan(freq="2412") @@ -555,7 +444,10 @@ def test_pmksa_cache_preauth_vlan_used(dev, apdev): raise Exception("Unexpected PMKID change") # Verify connectivity in the correct VLAN - hwsim_utils.test_connectivity_iface(dev[0], hapd, "brvlan1") + hwsim_utils.test_connectivity_iface(dev[0], hapd, databridge) + + if not force_disconnect: + return # Disconnect the STA from both APs to avoid forceful ifdown by the # test script on a VLAN that this has an associated STA. That used to @@ -566,6 +458,59 @@ def test_pmksa_cache_preauth_vlan_used(dev, apdev): finally: subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'down'], stderr=open('/dev/null', 'w')) + subprocess.call(['brctl', 'delbr', 'ap-br0'], + stderr=open('/dev/null', 'w')) + +def test_pmksa_cache_preauth(dev, apdev): + """RSN pre-authentication to generate PMKSA cache entry""" + generic_pmksa_cache_preauth(dev, apdev, None, + "pax.user@example.com", "ap-br0") + +def test_pmksa_cache_preauth_per_sta_vif(dev, apdev): + """RSN pre-authentication to generate PMKSA cache entry with per_sta_vif""" + extraparams = [{}, {}] + extraparams[0]['per_sta_vif'] = "1" + extraparams[1]['per_sta_vif'] = "1" + generic_pmksa_cache_preauth(dev, apdev, extraparams, + "pax.user@example.com", "ap-br0") + +def test_pmksa_cache_preauth_vlan_enabled(dev, apdev): + """RSN pre-authentication to generate PMKSA cache entry (dynamic_vlan optional but station without VLAN set)""" + extraparams = [{}, {}] + extraparams[0]['dynamic_vlan'] = '1' + extraparams[1]['dynamic_vlan'] = '1' + generic_pmksa_cache_preauth(dev, apdev, extraparams, + "pax.user@example.com", "ap-br0") + +def test_pmksa_cache_preauth_vlan_enabled_per_sta_vif(dev, apdev): + """RSN pre-authentication to generate PMKSA cache entry (dynamic_vlan optional but station without VLAN set, with per_sta_vif enabled)""" + extraparams = [{}, {}] + extraparams[0]['per_sta_vif'] = "1" + extraparams[1]['per_sta_vif'] = "1" + extraparams[0]['dynamic_vlan'] = '1' + extraparams[1]['dynamic_vlan'] = '1' + generic_pmksa_cache_preauth(dev, apdev, extraparams, + "pax.user@example.com", "ap-br0") + +def test_pmksa_cache_preauth_vlan_used(dev, apdev): + """RSN pre-authentication to generate PMKSA cache entry (station with VLAN set)""" + run_pmksa_cache_preauth_vlan_used(dev, apdev, None, force_disconnect=True) + +def run_pmksa_cache_preauth_vlan_used(dev, apdev, extraparams=None, + force_disconnect=False): + try: + subprocess.call(['brctl', 'addbr', 'brvlan1']) + subprocess.call(['brctl', 'setfd', 'brvlan1', '0']) + if not extraparams: + extraparams = [{}, {}] + extraparams[0]['dynamic_vlan'] = '1' + extraparams[0]['vlan_file'] = 'hostapd.wlan3.vlan' + extraparams[1]['dynamic_vlan'] = '1' + extraparams[1]['vlan_file'] = 'hostapd.wlan4.vlan' + generic_pmksa_cache_preauth(dev, apdev, extraparams, + "vlan1", "brvlan1", + force_disconnect=force_disconnect) + finally: subprocess.call(['ip', 'link', 'set', 'dev', 'brvlan1', 'down']) subprocess.call(['ip', 'link', 'set', 'dev', 'wlan3.1', 'down'], stderr=open('/dev/null', 'w')) @@ -575,10 +520,15 @@ def test_pmksa_cache_preauth_vlan_used(dev, apdev): stderr=open('/dev/null', 'w')) subprocess.call(['brctl', 'delif', 'brvlan1', 'wlan4.1'], stderr=open('/dev/null', 'w')) - subprocess.call(['brctl', 'delbr', 'ap-br0'], - stderr=open('/dev/null', 'w')) subprocess.call(['brctl', 'delbr', 'brvlan1']) +def test_pmksa_cache_preauth_vlan_used_per_sta_vif(dev, apdev): + """RSN pre-authentication to generate PMKSA cache entry (station with VLAN set, per_sta_vif=1)""" + extraparams = [{}, {}] + extraparams[0]['per_sta_vif'] = "1" + extraparams[1]['per_sta_vif'] = "1" + run_pmksa_cache_preauth_vlan_used(dev, apdev, extraparams) + def test_pmksa_cache_disabled(dev, apdev): """PMKSA cache disabling on AP""" params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")