--- /dev/null
+# Makefile.in generated by automake 1.10.3 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile.am for the SASL utilities
+# Rob Earhart
+#
+################################################################
+# Copyright (c) 2000 Carnegie Mellon University. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+#
+# 3. The name "Carnegie Mellon University" must not be used to
+# endorse or promote products derived from this software without
+# prior written permission. For permission or any other legal
+# details, please contact
+# Office of Technology Transfer
+# Carnegie Mellon University
+# 5000 Forbes Avenue
+# Pittsburgh, PA 15213-3890
+# (412) 268-4387, fax: (412) 268-7395
+# tech-transfer@andrew.cmu.edu
+#
+# 4. Redistributions of any form whatsoever must retain the following
+# acknowledgment:
+# "This product includes software developed by Computing Services
+# at Carnegie Mellon University (http://www.cmu.edu/computing/)."
+#
+# CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE
+# FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+# AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+# OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+#
+################################################################
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+sbin_PROGRAMS = @SASL_DB_UTILS@ @SMTPTEST_PROGRAM@ \
+ pluginviewer$(EXEEXT)
+EXTRA_PROGRAMS = saslpasswd2$(EXEEXT) sasldblistusers2$(EXEEXT) \
+ testsuite$(EXEEXT) testsuitestatic$(EXEEXT) smtptest$(EXEEXT) \
+ pluginviewer$(EXEEXT)
+noinst_PROGRAMS = dbconverter-2$(EXEEXT)
+subdir = utils
+DIST_COMMON = $(saslinclude_HEADERS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/kerberos_v4.m4 \
+ $(top_srcdir)/config/libtool.m4 \
+ $(top_srcdir)/config/ltoptions.m4 \
+ $(top_srcdir)/config/ltsugar.m4 \
+ $(top_srcdir)/config/ltversion.m4 \
+ $(top_srcdir)/config/lt~obsolete.m4 \
+ $(top_srcdir)/config/plain.m4 $(top_srcdir)/config/sasldb.m4 \
+ $(top_srcdir)/cmulocal/berkdb.m4 \
+ $(top_srcdir)/cmulocal/bsd_sockets.m4 \
+ $(top_srcdir)/cmulocal/c-attribute.m4 \
+ $(top_srcdir)/cmulocal/common.m4 \
+ $(top_srcdir)/cmulocal/cyrus.m4 \
+ $(top_srcdir)/cmulocal/init_automake.m4 \
+ $(top_srcdir)/cmulocal/ipv6.m4 \
+ $(top_srcdir)/cmulocal/openldap.m4 \
+ $(top_srcdir)/cmulocal/openssl.m4 \
+ $(top_srcdir)/cmulocal/sasl2.m4 $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(sbindir)" \
+ "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(saslincludedir)"
+libLTLIBRARIES_INSTALL = $(INSTALL)
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libsfsasl2_la_DEPENDENCIES = sfsasl.lo
+am_libsfsasl2_la_OBJECTS =
+libsfsasl2_la_OBJECTS = $(am_libsfsasl2_la_OBJECTS)
+libsfsasl2_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(libsfsasl2_la_LDFLAGS) $(LDFLAGS) -o $@
+sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+PROGRAMS = $(noinst_PROGRAMS) $(sbin_PROGRAMS)
+dbconverter_2_SOURCES = dbconverter-2.c
+dbconverter_2_OBJECTS = dbconverter-2.$(OBJEXT)
+am__DEPENDENCIES_1 =
+am__DEPENDENCIES_2 = ../lib/libsasl2.la $(am__DEPENDENCIES_1) \
+ $(am__DEPENDENCIES_1)
+dbconverter_2_DEPENDENCIES = ../sasldb/libsasldb.la \
+ $(am__DEPENDENCIES_2)
+am_pluginviewer_OBJECTS = pluginviewer.$(OBJEXT)
+pluginviewer_OBJECTS = $(am_pluginviewer_OBJECTS)
+pluginviewer_DEPENDENCIES = $(am__DEPENDENCIES_2)
+am_sasldblistusers2_OBJECTS = sasldblistusers.$(OBJEXT)
+sasldblistusers2_OBJECTS = $(am_sasldblistusers2_OBJECTS)
+sasldblistusers2_DEPENDENCIES = ../sasldb/libsasldb.la \
+ $(am__DEPENDENCIES_2)
+am_saslpasswd2_OBJECTS = saslpasswd.$(OBJEXT)
+saslpasswd2_OBJECTS = $(am_saslpasswd2_OBJECTS)
+saslpasswd2_DEPENDENCIES = ../sasldb/libsasldb.la \
+ $(am__DEPENDENCIES_2)
+am_smtptest_OBJECTS =
+smtptest_OBJECTS = $(am_smtptest_OBJECTS)
+testsuite_SOURCES = testsuite.c
+testsuite_OBJECTS = testsuite.$(OBJEXT)
+testsuite_DEPENDENCIES = $(am__DEPENDENCIES_2)
+am_testsuitestatic_OBJECTS = testsuite.$(OBJEXT)
+testsuitestatic_OBJECTS = $(am_testsuitestatic_OBJECTS)
+am__DEPENDENCIES_3 = ../lib/.libs/libsasl2.a $(am__DEPENDENCIES_1) \
+ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(libsfsasl2_la_SOURCES) dbconverter-2.c \
+ $(pluginviewer_SOURCES) $(sasldblistusers2_SOURCES) \
+ $(saslpasswd2_SOURCES) $(smtptest_SOURCES) testsuite.c \
+ $(testsuitestatic_SOURCES)
+DIST_SOURCES = $(libsfsasl2_la_SOURCES) dbconverter-2.c \
+ $(pluginviewer_SOURCES) $(sasldblistusers2_SOURCES) \
+ $(saslpasswd2_SOURCES) $(smtptest_SOURCES) testsuite.c \
+ $(testsuitestatic_SOURCES)
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(man_MANS)
+saslincludeHEADERS_INSTALL = $(INSTALL_HEADER)
+HEADERS = $(saslinclude_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CMU_LIB_SUBDIR = @CMU_LIB_SUBDIR@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DIRS = @DIRS@
+DMALLOC_LIBS = @DMALLOC_LIBS@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETADDRINFOOBJS = @GETADDRINFOOBJS@
+GETNAMEINFOOBJS = @GETNAMEINFOOBJS@
+GETSUBOPT = @GETSUBOPT@
+GREP = @GREP@
+GSSAPIBASE_LIBS = @GSSAPIBASE_LIBS@
+GSSAPI_LIBS = @GSSAPI_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPCTYPE = @IPCTYPE@
+JAVAC = @JAVAC@
+JAVADOC = @JAVADOC@
+JAVAH = @JAVAH@
+JAVAROOT = @JAVAROOT@
+JAVA_INCLUDES = @JAVA_INCLUDES@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIB_CRYPT = @LIB_CRYPT@
+LIB_DES = @LIB_DES@
+LIB_DOOR = @LIB_DOOR@
+LIB_LDAP = @LIB_LDAP@
+LIB_MYSQL = @LIB_MYSQL@
+LIB_PGSQL = @LIB_PGSQL@
+LIB_SOCKET = @LIB_SOCKET@
+LIB_SQLITE = @LIB_SQLITE@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTGETADDRINFOOBJS = @LTGETADDRINFOOBJS@
+LTGETNAMEINFOOBJS = @LTGETNAMEINFOOBJS@
+LTLIBOBJS = @LTLIBOBJS@
+LTSNPRINTFOBJS = @LTSNPRINTFOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NTLM_LIBS = @NTLM_LIBS@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+OTP_LIBS = @OTP_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PASSDSS_LIBS = @PASSDSS_LIBS@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PLAIN_LIBS = @PLAIN_LIBS@
+PURECOV = @PURECOV@
+PURIFY = @PURIFY@
+PWCHECKMETH = @PWCHECKMETH@
+RANLIB = @RANLIB@
+SASL_DB_BACKEND = @SASL_DB_BACKEND@
+SASL_DB_BACKEND_STATIC = @SASL_DB_BACKEND_STATIC@
+SASL_DB_INC = @SASL_DB_INC@
+SASL_DB_LIB = @SASL_DB_LIB@
+SASL_DB_MANS = @SASL_DB_MANS@
+SASL_DB_UTILS = @SASL_DB_UTILS@
+SASL_DL_LIB = @SASL_DL_LIB@
+SASL_KRB_LIB = @SASL_KRB_LIB@
+SASL_MECHS = @SASL_MECHS@
+SASL_STATIC_LIBS = @SASL_STATIC_LIBS@
+SASL_STATIC_OBJS = @SASL_STATIC_OBJS@
+SASL_STATIC_SRCS = @SASL_STATIC_SRCS@
+SASL_UTIL_HEADERS_EXTRA = @SASL_UTIL_HEADERS_EXTRA@
+SASL_UTIL_LIBS_EXTRA = @SASL_UTIL_LIBS_EXTRA@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SFIO_INC_FLAGS = @SFIO_INC_FLAGS@
+SFIO_LIB_FLAGS = @SFIO_LIB_FLAGS@
+SHELL = @SHELL@
+SMTPTEST_PROGRAM = @SMTPTEST_PROGRAM@
+SNPRINTFOBJS = @SNPRINTFOBJS@
+SRP_LIBS = @SRP_LIBS@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+configdir = @configdir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+plugindir = @plugindir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+all_sasl_libs = ../lib/libsasl2.la $(SASL_DB_LIB) $(LIB_SOCKET)
+all_sasl_static_libs = ../lib/.libs/libsasl2.a $(SASL_DB_LIB) $(LIB_SOCKET) $(GSSAPIBASE_LIBS) $(GSSAPI_LIBS) $(SASL_KRB_LIB) $(LIB_DES) $(PLAIN_LIBS) $(SRP_LIBS) $(LIB_MYSQL) $(LIB_PGSQL) $(LIB_SQLITE)
+@NO_SASL_DB_MANS_FALSE@man_MANS = saslpasswd2.8 sasldblistusers2.8 pluginviewer.8
+@NO_SASL_DB_MANS_TRUE@man_MANS =
+saslpasswd2_LDADD = ../sasldb/libsasldb.la $(all_sasl_libs)
+saslpasswd2_SOURCES = saslpasswd.c
+sasldblistusers2_LDADD = ../sasldb/libsasldb.la $(all_sasl_libs)
+sasldblistusers2_SOURCES = sasldblistusers.c
+dbconverter_2_LDADD = ../sasldb/libsasldb.la $(all_sasl_libs)
+pluginviewer_LDADD = $(all_sasl_libs)
+pluginviewer_SOURCES = pluginviewer.c
+testsuite_LDADD = $(all_sasl_libs) @DMALLOC_LIBS@
+CLEANFILES = $(EXTRA_PROGRAMS)
+testsuitestatic_SOURCES = testsuite.c
+testsuitestatic_LDADD = $(all_sasl_static_libs) @DMALLOC_LIBS@ @SASL_DL_LIB@
+testsuitestatic_DEPENDENCIES = ../lib/.libs/libsasl2.a
+smtptest_SOURCES =
+smtptest_DEPENDENCIES = ./smtptest.lo ./libsfsasl2.la
+smtptest_LDADD = ./smtptest.lo ./libsfsasl2.la @SFIO_LIB_FLAGS@ @DMALLOC_LIBS@ $(all_sasl_libs)
+saslincludedir = $(includedir)/sasl
+saslinclude_HEADERS = @SASL_UTIL_HEADERS_EXTRA@
+EXTRA_HEADERS = sfsasl.h
+
+# Note: we explicitly do *not* link to libsfio, as people will need to
+# link to that anyway if they want to use this.
+lib_LTLIBRARIES = @SASL_UTIL_LIBS_EXTRA@
+EXTRA_LTLIBRARIES = libsfsasl2.la
+libsfsasl2_la_SOURCES =
+libsfsasl2_la_LIBADD = sfsasl.lo
+libsfsasl2_la_LDFLAGS = -version-info 1:0:0 -export-dynamic -rpath $(libdir)
+INCLUDES = -I$(top_srcdir)/include -I$(top_builddir)/include @SASL_DB_INC@
+EXTRA_DIST = saslpasswd2.8 sasldblistusers2.8 pluginviewer.8 sfsasl.h sfsasl.c smtptest.c testsuite.c pluginviewer.c NTMakefile
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu utils/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu utils/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ if test -f $$p; then \
+ f=$(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+ else :; fi; \
+ done
+
+uninstall-libLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ p=$(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+ done
+
+clean-libLTLIBRARIES:
+ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+ test "$$dir" != "$$p" || dir=.; \
+ echo "rm -f \"$${dir}/so_locations\""; \
+ rm -f "$${dir}/so_locations"; \
+ done
+libsfsasl2.la: $(libsfsasl2_la_OBJECTS) $(libsfsasl2_la_DEPENDENCIES)
+ $(libsfsasl2_la_LINK) $(libsfsasl2_la_OBJECTS) $(libsfsasl2_la_LIBADD) $(LIBS)
+
+clean-noinstPROGRAMS:
+ @list='$(noinst_PROGRAMS)'; for p in $$list; do \
+ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f $$p $$f"; \
+ rm -f $$p $$f ; \
+ done
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
+ @list='$(sbin_PROGRAMS)'; for p in $$list; do \
+ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ if test -f $$p \
+ || test -f $$p1 \
+ ; then \
+ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
+ else :; fi; \
+ done
+
+uninstall-sbinPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_PROGRAMS)'; for p in $$list; do \
+ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
+ rm -f "$(DESTDIR)$(sbindir)/$$f"; \
+ done
+
+clean-sbinPROGRAMS:
+ @list='$(sbin_PROGRAMS)'; for p in $$list; do \
+ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f $$p $$f"; \
+ rm -f $$p $$f ; \
+ done
+dbconverter-2$(EXEEXT): $(dbconverter_2_OBJECTS) $(dbconverter_2_DEPENDENCIES)
+ @rm -f dbconverter-2$(EXEEXT)
+ $(LINK) $(dbconverter_2_OBJECTS) $(dbconverter_2_LDADD) $(LIBS)
+pluginviewer$(EXEEXT): $(pluginviewer_OBJECTS) $(pluginviewer_DEPENDENCIES)
+ @rm -f pluginviewer$(EXEEXT)
+ $(LINK) $(pluginviewer_OBJECTS) $(pluginviewer_LDADD) $(LIBS)
+sasldblistusers2$(EXEEXT): $(sasldblistusers2_OBJECTS) $(sasldblistusers2_DEPENDENCIES)
+ @rm -f sasldblistusers2$(EXEEXT)
+ $(LINK) $(sasldblistusers2_OBJECTS) $(sasldblistusers2_LDADD) $(LIBS)
+saslpasswd2$(EXEEXT): $(saslpasswd2_OBJECTS) $(saslpasswd2_DEPENDENCIES)
+ @rm -f saslpasswd2$(EXEEXT)
+ $(LINK) $(saslpasswd2_OBJECTS) $(saslpasswd2_LDADD) $(LIBS)
+smtptest$(EXEEXT): $(smtptest_OBJECTS) $(smtptest_DEPENDENCIES)
+ @rm -f smtptest$(EXEEXT)
+ $(LINK) $(smtptest_OBJECTS) $(smtptest_LDADD) $(LIBS)
+testsuite$(EXEEXT): $(testsuite_OBJECTS) $(testsuite_DEPENDENCIES)
+ @rm -f testsuite$(EXEEXT)
+ $(LINK) $(testsuite_OBJECTS) $(testsuite_LDADD) $(LIBS)
+testsuitestatic$(EXEEXT): $(testsuitestatic_OBJECTS) $(testsuitestatic_DEPENDENCIES)
+ @rm -f testsuitestatic$(EXEEXT)
+ $(LINK) $(testsuitestatic_OBJECTS) $(testsuitestatic_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbconverter-2.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pluginviewer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sasldblistusers.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/saslpasswd.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testsuite.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-man8: $(man8_MANS) $(man_MANS)
+ @$(NORMAL_INSTALL)
+ test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
+ @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.8*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ if test -f $$i; then file=$$i; \
+ else file=$(srcdir)/$$i; fi; \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 8*) ;; \
+ *) ext='8' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
+ done
+uninstall-man8:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.8*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 8*) ;; \
+ *) ext='8' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
+ rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
+ done
+install-saslincludeHEADERS: $(saslinclude_HEADERS)
+ @$(NORMAL_INSTALL)
+ test -z "$(saslincludedir)" || $(MKDIR_P) "$(DESTDIR)$(saslincludedir)"
+ @list='$(saslinclude_HEADERS)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(am__strip_dir) \
+ echo " $(saslincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(saslincludedir)/$$f'"; \
+ $(saslincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(saslincludedir)/$$f"; \
+ done
+
+uninstall-saslincludeHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(saslinclude_HEADERS)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(saslincludedir)/$$f'"; \
+ rm -f "$(DESTDIR)$(saslincludedir)/$$f"; \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically \`make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS)
+installdirs:
+ for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(saslincludedir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+ clean-noinstPROGRAMS clean-sbinPROGRAMS mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man install-saslincludeHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-libLTLIBRARIES install-sbinPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-libLTLIBRARIES uninstall-man \
+ uninstall-saslincludeHEADERS uninstall-sbinPROGRAMS
+
+uninstall-man: uninstall-man8
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-libLTLIBRARIES clean-libtool clean-noinstPROGRAMS \
+ clean-sbinPROGRAMS ctags distclean distclean-compile \
+ distclean-generic distclean-libtool distclean-tags distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-libLTLIBRARIES \
+ install-man install-man8 install-pdf install-pdf-am install-ps \
+ install-ps-am install-saslincludeHEADERS install-sbinPROGRAMS \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+ pdf pdf-am ps ps-am tags uninstall uninstall-am \
+ uninstall-libLTLIBRARIES uninstall-man uninstall-man8 \
+ uninstall-saslincludeHEADERS uninstall-sbinPROGRAMS
+
+
+sfsasl.lo: sfsasl.c
+ $(LIBTOOL) --mode=compile $(COMPILE) @SFIO_INC_FLAGS@ -c $(srcdir)/sfsasl.c
+
+smtptest.lo: smtptest.c
+ $(LIBTOOL) --mode=compile $(COMPILE) @SFIO_INC_FLAGS@ -c $(srcdir)/smtptest.c
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
projects / cyrus-sasl.git / blobdiff