-## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
-## Copyright (C) 1996-1999 Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
-
-# serial 40 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-dnl
-
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
- [ --disable-libtool-lock avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$lt_target" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
-])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
-changequote(,)dnl
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
else
- AC_MSG_RESULT(no)
+ $1_TRUE='#'
+ $1_FALSE=
fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi])
-])
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- ac_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
- break
- else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$lt_target" in
-*-*-beos* | *-*-cygwin*)
- # These system don't have libm
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, main, LIBM="-lm")
- ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case "$enable_ltdl_convenience" in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, main,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- INCLTDL=
- fi
-])
-
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-dnl See whether we need a declaration for a function.
-dnl RADIUSD_NEED_DECLARATION(FUNCTION [, EXTRA-HEADER-FILES])
-AC_DEFUN(RADIUSD_NEED_DECLARATION,
-[AC_MSG_CHECKING([whether $1 must be declared])
-AC_CACHE_VAL(radius_cv_decl_needed_$1,
-[AC_TRY_COMPILE([
-#include <stdio.h>
-#include <string.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef HAVE_CRYPT_H
-#include <crypt.h>
-#endif
-#ifdef HAVE_ERRNO_H
-#include <errno.h>
-#endif
-#ifdef HAVE_RESOURCE_H
-#include <resource.h>
-#endif
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-#ifdef HAVE_MALLOC_H
-#include <malloc.h>
-#endif
-#ifdef HAVE_UTMP_H
-#include <utmp.h>
-#endif
-#ifdef HAVE_UTMPX_H
-#include <utmpx.h>
-#endif
-#ifdef HAVE_SYS_SELECT_H
-#include <sys/select.h>
-#endif
-#ifdef HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-#ifdef HAVE_REGEX_H
-#include <regex.h>
-#endif
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-#include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_ARPA_INET_H
-#include <arpa/inet.h>
-#endif
-$2],
-[char *(*pfn) = (char *(*)) $1],
-eval "radius_cv_decl_needed_$1=no", eval "radius_cv_decl_needed_$1=yes")])
-if eval "test \"`echo '$radius_cv_decl_needed_'$1`\" = yes"; then
- AC_MSG_RESULT(yes)
- radius_tr_decl=NEED_DECLARATION_`echo $1 | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- AC_DEFINE_UNQUOTED($radius_tr_decl)
-else
- AC_MSG_RESULT(no)
-fi
-])dnl
-
-dnl Check multiple functions to see whether each needs a declaration.
-dnl RADIUSD_NEED_DECLARATIONS(FUNCTION... [, EXTRA-HEADER-FILES])
-AC_DEFUN(RADIUSD_NEED_DECLARATIONS,
-[for ac_func in $1
-do
-RADIUSD_NEED_DECLARATION($ac_func, $2)
-done
-])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
- $1=$2
- AC_MSG_RESULT(found)
-else
- $1="$3/missing $2"
- AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-
-dnl Checks to see if this is SUNPro we're building with
-dnl Usage:
-dnl AC_PROG_CC_SUNPRO
-AC_DEFUN(AC_PROG_CC_SUNPRO,
-[AC_CACHE_CHECK(whether we are using SUNPro C, ac_cv_prog_suncc,
-[dnl The semicolon is to pacify NeXT's syntax-checking cpp.
-cat > conftest.c <<EOF
-#ifdef __SUNPRO_C
- yes;
-#endif
-EOF
-if AC_TRY_COMMAND(${CC-cc} -E conftest.c) | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_suncc=yes
-else
- ac_cv_prog_suncc=no
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
fi])])
-dnl #
-dnl # AC_CHECK_TYPE_INCLUDE([#includes ...], type, default-C-types)
-dnl #
-dnl # This function is like AC_CHECK_TYPE, but you can give this one
-dnl # a list of include files to check.
-dnl #
-AC_DEFUN(AC_CHECK_TYPE_INCLUDE,
-[
- AC_CACHE_CHECK(for $2, ac_cv_type_$2,
- [ ac_cv_type_$2=no
- AC_TRY_COMPILE($1,
- [$2 foo],
- ac_cv_type_$2=yes,
- )
- ]
- )
-
- if test "$ac_cv_type_$2" != "yes"; then
- AC_DEFINE($2, $3)
- fi
-])
-
-dnl Check the PostgreSQL installation
-
-AC_DEFUN(POSTGRESQL_CHECKS, [
- AC_SUBST(PGROOT)
- AC_SUBST(PQ_LIBS)
- AC_SUBST(PG_INCLUDE_DIR)
-
-AC_CHECKING(for PostgreSQL includes)
-
-dnl First Check for a local install
-if test $PGROOT ; then
- IS_LOCAL=1
-else
- dnl Check common local install paths
- if test -d /usr/local/pgsql ; then
- PGROOT="/usr/local/pgsql"
- ISLOCAL=1
- elif test -d /usr/local/postgresql ; then
- PGROOT="/usr/local/postgresql"
- ISLOCAL=1
- elif test -d /opt/pgsql ; then
- PGROOT="/opt/pgsql"
- ISLOCAL=1
- elif test -d /opt/postgresql ; then
- PGROOT="/opt/postgresql"
- ISLOCAL=1
- fi
-fi
-dnl If we have a local install path, check for some files
-if test $PGROOT && test IS_LOCAL ; then
- if test -e $PGROOT/lib/libpq${libltdl_cv_shlibext} ; then
- if test -e $PGROOT/lib/libpq.a ; then
- PQ_LIBS="-L$PGROOT/lib -lpq"
- fi
- fi
- AC_CHECK_HEADERS($PGROOT/include/libpq-fe.h $PGROOT/include/postgres.h,
- FOUND_PG_HEADERS=1)
- if test $FOUND_PG_HEADERS ; then
- PG_INCLUDE_DIR="$PGROOT/include"
- fi
-fi
-
-dnl Now check for the two common distribution installation locations
-if test "x$PGROOT" = "x" ; then
- AC_CHECK_LIB(pq,PQconnectdb,FOUND_PQLIB=1)
- if test $FOUND_PQLIB ; then
- PQ_LIBS="-lpq"
- fi
- if test -d /usr/include/pgsql ; then
- PG_INCLUDE_DIR="/usr/include/pgsql"
- PG_INCLUDED_DIR="$PG_INCLUDE_DIR/"
- elif test -d /usr/include/postgresql ; then
- PG_INCLUDE_DIR="/usr/include/postgresql"
- PG_INCLUDED_DIR="$PG_INCLUDE_DIR/"
- fi
- AC_CHECK_HEADER("${PG_INCLUDED_DIR}libpq-fe.h",AC_DEFINE(HAVE_LIBPQ_FE_H))
- AC_CHECK_HEADER("${PG_INCLUDED_DIR}postgres.h",AC_DEFINE(HAVE_POSTGRES_H))
- if test $HAVE_HEADER-LIBPQ-FE.H ; then
- PG_INCLUDE_DIR="$PG_INCLUDE_DIR"
- fi
- if test -d /usr/lib/pgsql ; then
- PGROOT="/usr/lib/pgsql"
- elif test -d /usr/lib/postgresql ; then
- PGROOT="/usr/lib/postgresql"
- fi
-fi
-
-if test "$PGROOT" && test "$PQ_LIBS" && test "$PG_INCLUDE_DIR" ; then
- echo Postgresql found in $PGROOT.
-fi
-
-])
-
-dnl #######################################################################
-dnl #
-dnl # Look for ODBC in a variety of places.
-dnl #
-AC_DEFUN(ODBC_CHECKS, [
- AC_SUBST(ODBC_LIBS)
- AC_SUBST(ODBC_INCLUDE)
-
-AC_MSG_CHECKING([for isql.h])
-
-dnl #
-dnl # First, see if we can build it WITHOUT using any special includes
-dnl #
-AC_TRY_COMPILE([#include <isql.h>],
- [ int a = 1;],
- ODBC_INCLUDE=" ",
- ODBC_INCLUDE=)
-
-dnl #
-dnl # If not, look for it in a number of directories.
-dnl #
-if test "x$ODBC_INCLUDE" = "x"; then
- old_CFLAGS="$CFLAGS"
-
- AC_LOCATE_DIR(odbc_include_dir, isql.h)
-
- for try in /usr/include /usr/local/include/odbc /usr/local/odbc/include $odbc_include_dir; do
- CFLAGS="$old_CFLAGS -I$try"
- AC_TRY_COMPILE([#include <isql.h>],
- [ int a = 1;],
- ODBC_INCLUDE="-I$try",
- ODBC_INCLUDE=)
- if test "x$ODBC_INCLUDE" != "x"; then
- break;
- fi
- done
- CFLAGS="$old_CFLAGS"
-fi
-
-if test "x$ODBC_INCLUDE" = "x"; then
- AC_MSG_RESULT(no)
-else
- AC_MSG_RESULT(yes)
-
-dnl #
-dnl # Now do the same thing, looking for the ODBC library directory
-dnl #
- AC_MSG_CHECKING([for odbc_init in -lodbcclient])
-
-dnl #
-dnl # Look for it in a number of directories.
-dnl #
- old_LIBS="$LIBS"
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
- AC_LOCATE_DIR(odbc_lib_dir, [libodbcclient${libltdl_cv_shlibext}])
- AC_LOCATE_DIR(odbc_lib_dir, [libodbcclient.a])
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
- for try in /usr/lib /usr/lib/odbc /usr/local/lib/odbc /usr/local/odbc/lib $odbc_lib_dir; do
- LIBS="$old_LIBS -L$try -lodbcclient"
- AC_TRY_LINK([extern char odbc_init();],
- [ odbc_init()],
- ODBC_LIBS="-L$try -lodbcclient",
- ODBC_LIBS=)
- if test "x$ODBC_LIBS" != "x"; then
- break;
- fi
- done
- LIBS="$old_LIBS"
+# serial 5
- dnl #
- dnl # If one or the other isn't found, disable them both..
- dnl # If both are found, enable them both.
- dnl #
- if test "x$ODBC_LIBS" = "x"; then
- AC_MSG_RESULT(no)
- ODBC_INCLUDE=
- else
- AC_MSG_RESULT(yes)
- AC_DEFINE(HAVE_ISQL_H)
- fi
-fi
-])
-
-dnl #######################################################################
-dnl #
-dnl # Look for SNMP in a variety of places.
-dnl #
-AC_DEFUN(SNMP_CHECKS, [
- AC_SUBST(SNMP_LIBS)
- AC_SUBST(SNMP_INCLUDE)
-
-AC_MSG_CHECKING([for asn1.h])
-
-dnl #
-dnl # First, see if we can build it WITHOUT using any special includes
-dnl #
-AC_TRY_COMPILE([
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_STDIO_H
-#include <stdio.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#include <asn1.h>],
- [ int a = 1;],
- SNMP_INCLUDE="",
- SNMP_INCLUDE=)
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
-dnl #
-dnl # If not, look for it in a number of directories.
-dnl #
-if test "x$SNMP_INCLUDE" = "x"; then
- old_CFLAGS="$CFLAGS"
- for try in /usr/include/ucd-snmp /usr/local/include/ucd-snmp $snmp_include_dir; do
- CFLAGS="$old_CFLAGS -I$try"
- AC_TRY_COMPILE([
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_STDIO_H
-#include <stdio.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#include <asn1.h>],
- [ int a = 1;],
- SNMP_INCLUDE="-I$try",
- SNMP_INCLUDE=)
- if test "x$SNMP_INCLUDE" != "x"; then
- break;
- fi
- done
- CFLAGS="$old_CFLAGS"
-fi
-if test "x$SNMP_INCLUDE" = "x"; then
- AC_MSG_RESULT(no)
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
else
- AC_MSG_RESULT(yes)
- AC_DEFINE(HAVE_ASN1_H)
-
-dnl #
-dnl # Check for the rest of the SNMP headers.
-dnl #
- old_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $SNMP_INCLUDE"
-
- AC_MSG_CHECKING(for snmp.h)
- AC_TRY_COMPILE([
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_STDIO_H
-#include <stdio.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef HAVE_ASN1_H
-#include <asn1.h>
-#endif
-#include <snmp.h>],
- [ int a = 1;],
- [AC_DEFINE(HAVE_SNMP_H) ac_cv_header_snmp_h=yes])
- if test "x$ac_cv_header_snmp_h" = "xyes"; then
- AC_MSG_RESULT(yes)
- else
- AC_MSG_RESULT(no)
- fi
-
- AC_MSG_CHECKING(for snmp_impl.h)
- AC_TRY_COMPILE([
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_STDIO_H
-#include <stdio.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef HAVE_ASN1_H
-#include <asn1.h>
-#endif
-#ifdef HAVE_SNMP_H
-#include <snmp.h>
-#endif
-#include <snmp_impl.h>],
- [ int a = 1;],
- [AC_DEFINE(HAVE_SNMP_IMPL_H) ac_cv_header_snmp_impl_h=yes])
- if test "x$ac_cv_header_snmp_h" = "xyes"; then
- AC_MSG_RESULT(yes)
- else
- AC_MSG_RESULT(no)
- fi
-
-dnl #
-dnl # Now do the same thing, looking for the SNMP library directory
-dnl #
- AC_MSG_CHECKING([for snmp_build_var_op in -lsnmp])
-
-dnl #
-dnl # First, see if we can build it WITHOUT using any special includes
-dnl #
- old_LIBS="$LIBS"
- LIBS="$old_LIBS -lsnmp"
- AC_TRY_LINK([extern char snmp_build_var_op();],
- [ snmp_build_var_op()],
- SNMP_LIBS="-lsnmp",
- SNMP_LIBS=)
-
-
- for try in /usr/lib /usr/local/lib /usr/local/snmp/lib $snmp_lib_dir; do
- LIBS="$old_LIBS -L$try -lsnmp"
- AC_TRY_LINK([extern char snmp_build_var_op();],
- [ snmp_build_var_op()],
- SNMP_LIBS="-L$try -lsnmp",
- SNMP_LIBS=)
- if test "x$SNMP_LIBS" != "x"; then
- break;
- fi
-
-dnl #
-dnl # That didn't work. Try adding the '-lcrypto' line.
-dnl # Some SNMP libraries are linked against SSL...
-dnl #
- LIBS="$old_LIBS -L$try -lsnmp -lcrypto"
- AC_TRY_LINK([extern char snmp_build_var_op();],
- [ snmp_build_var_op()],
- SNMP_LIBS="-L$try -lsnmp -lcrypto",
- SNMP_LIBS=)
- if test "x$SNMP_LIBS" != "x"; then
- break;
- fi
- done
- LIBS="$old_LIBS"
-
- dnl #
- dnl # If one or the other isn't found, disable them both..
- dnl # If both are found, enable them both.
- dnl #
- CFLAGS="$old_CFLAGS"
- if test "x$SNMP_LIBS" = "x"; then
- AC_MSG_RESULT(no)
- SNMP_INCLUDE=
- else
- AC_MSG_RESULT(yes)
- AC_DEFINE(WITH_SNMP)
- AC_DEFINE(HAVE_LIBSNMP)
- fi
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
fi
])
-
-dnl #
-dnl # Locate the directory in which a particular file is found.
-dnl #
-dnl # Usage: AC_LOCATE_DIR(MYSQLLIB_DIR, libmysqlclient.a)
-dnl #
-dnl # Defines the variable MYSQLLIB_DIR to be the directory(s) in
-dnl # which the file libmysqlclient.a is to be found.
-dnl #
-dnl #
-AC_DEFUN(AC_LOCATE_DIR,
-[
-dnl # If we have the program 'locate', then the problem of finding a
-dnl # particular file becomes MUCH easier.
-dnl #
-
-dnl #
-dnl # No 'locate' defined, do NOT do anything.
-dnl #
-if test "x$LOCATE" != "x"; then
- dnl #
- dnl # Root through a series of directories, looking for the given file.
- dnl #
- DIRS=
- file=$2
-
- for x in `${LOCATE} $file 2>/dev/null`; do
- dnl #
- dnl # When asked for 'foo', locate will also find 'foo_bar', which we
- dnl # don't want. We want that EXACT filename.
- dnl #
- dnl # We ALSO want to be able to look for files like 'mysql/mysql.h',
- dnl # and properly match them, too. So we try to strip off the last
- dnl # part of the filename, using the name of the file we're looking
- dnl # for. If we CANNOT strip it off, then the name will be unchanged.
- dnl #
- base=`echo $x | sed "s%/${file}%%"`
- if test "x$x" = "x$base"; then
- continue;
- fi
-
- dir=`${DIRNAME} $x 2>/dev/null`
- dnl #
- dnl # Exclude a number of directories.
- dnl #
- exclude=`echo ${dir} | ${GREP} /home`
- if test "x$exclude" != "x"; then
- continue
- fi
-
- dnl #
- dnl # OK, we have an exact match. Let's be sure that we only find ONE
- dnl # matching directory.
- dnl #
- already=`echo \$$1 ${DIRS} | ${GREP} ${dir}`
- if test "x$already" = "x"; then
- DIRS="$DIRS $dir"
- fi
- done
-fi
-
-dnl #
-dnl # And remember the directory in which we found the file.
-dnl #
-eval "$1=\"\$$1 $DIRS\""
-])
-
-
-dnl #######################################################################
-dnl #
-dnl # Look for a library in a number of places.
-dnl #
-AC_DEFUN(AC_SMART_CHECK_LIB, [
-
-AC_MSG_CHECKING([for $2 in -l$1])
-
-smart_lib=
-smart_lib_dir=
-
-dnl #
-dnl # Try to link it first, using the default libs && library paths
-dnl #
- old_LIBS="$LIBS"
- LIBS="$LIBS -l$1"
- AC_TRY_LINK([extern char $2();],
- [ $2()],
- smart_lib="-l$1")
-
- if test "x$smart_lib" = "x"; then
- AC_LOCATE_DIR(smart_lib_dir,[lib$1${libltdl_cv_shlibext}])
- AC_LOCATE_DIR(smart_lib_dir,[lib$1.a])
-
- for try in $smart_try_dir $smart_lib_dir /usr/local/lib/ /opt/lib; do
- LIBS="$old_LIBS -L$try -l$1"
-
- AC_TRY_LINK([extern char $2();],
- [ $2()],
- smart_lib="-L$try -l$1")
- if test "x$smart_lib" != "x"; then
- break;
- fi
- done
- LIBS="$old_LIBS"
- fi
-
- dnl #
- dnl # Found it, set the appropriate variable.
- dnl #
- if test "x$smart_lib" != "x"; then
- AC_MSG_RESULT(yes)
- eval "ac_cv_lib_$1_$2=yes"
- LIBS="$old_LIBS $smart_lib"
- SMART_LIBS="$SMART_LIBS $smart_lib"
- else
- AC_MSG_RESULT(no)
-fi
-])
-
-dnl #######################################################################
-dnl #
-dnl # Look for a header file in a number of places.
-dnl #
-AC_DEFUN(AC_SMART_CHECK_INCLUDE, [
-
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-AC_MSG_CHECKING([for $1])
-
-smart_include=
-smart_include_dir=
-
-dnl #
-dnl # Try to link it first, using the default includes
-dnl #
- old_CFLAGS="$CFLAGS"
- AC_TRY_COMPILE([#include <$1>],
- [ int a = 1;],
- smart_include=" ",
- smart_include=)
-
- if test "x$smart_include" = "x"; then
- AC_LOCATE_DIR(smart_include_dir,$1)
-
- for try in $smart_try_dir $smart_include_dir /usr/local/include/ /opt/include; do
- CFLAGS="$old_CFLAGS -I$try"
-
- AC_TRY_COMPILE([#include <$1>],
- [ int a = 1;],
- smart_include="-I$try",
- smart_include=)
-
- if test "x$smart_include" != "x"; then
- break;
- fi
- done
- CFLAGS="$old_CFLAGS"
- fi
-
- dnl #
- dnl # Found it, set the appropriate variable.
- dnl #
- if test "x$smart_include" != "x"; then
- AC_MSG_RESULT(yes)
- eval "ac_cv_header_$ac_safe=yes"
- CFLAGS="$old_CFLAGS $smart_include"
- SMART_CFLAGS="$SMART_CFLAGS $smart_include"
- else
- AC_MSG_RESULT(no)
-fi
-])
-
-dnl #######################################################################
-dnl #
-dnl # Look for a header file in a number of places.
-dnl #
-dnl # Usage: AC_CHECK_STRUCT_HAS_MEMBER([#include <foo.h>], [struct foo], member)
-dnl # If the member is defined, then the variable
-dnl # ac_cv_type_struct_foo_member is set to 'yes'
-dnl #
-AC_DEFUN(AC_CHECK_STRUCT_HAS_MEMBER, [
- AC_MSG_CHECKING([for $3 in $2])
-
-dnl BASED on 'offsetof':
-dnl #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
-dnl
-
- AC_TRY_COMPILE([
-$1
-#ifndef offsetof
-#define offsetof(TYPE, MEMBER) ((int) &((TYPE *)0)->MEMBER)
-#endif
-],
- [ int foo = offsetof($2, $3) ],
- has_element=" ",
- has_element=)
-
- ac_safe_type=`echo "$2" | sed 'y% %_%'`
- if test "x$has_element" != "x"; then
- AC_MSG_RESULT(yes)
- eval "ac_cv_type_${ac_safe_type}_has_$3=yes"
- else
- AC_MSG_RESULT(no)
- eval "ac_cv_type_${ac_safe_type}_has_$3="
- fi
-])
+# Copyright (C) 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+m4_include([libltdl/m4/argz.m4])
+m4_include([libltdl/m4/libtool.m4])
+m4_include([libltdl/m4/ltdl.m4])
+m4_include([libltdl/m4/ltoptions.m4])
+m4_include([libltdl/m4/ltsugar.m4])
+m4_include([libltdl/m4/ltversion.m4])
+m4_include([libltdl/m4/lt~obsolete.m4])
+m4_include([acinclude.m4])
projects / freeradius.git / blobdiff