ttls chbind: update VSA to use

[freeradius.git] / configure.in

diff --git a/configure.in b/configure.in
index e8ba8c5..eace2ee 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -52,6 +52,13 @@ AC_PROG_GCC_TRADITIONAL
 AC_PROG_CC_SUNPRO
 AC_PROG_RANLIB
 
+dnl #
+dnl # Set Default CFLAGS
+dnl #
+if test "x$GCC" = "xyes"; then
+    CFLAGS="$CFLAGS -Wall -D_GNU_SOURCE"
+fi
+
 dnl Compile in large (2G+) file support.
 AC_SYS_LARGEFILE
 
@@ -72,15 +79,17 @@ if test -z "$makever"; then
                from ftp://prep.ai.mit.edu/pub/gnu/make/ before continuing.)
 fi
 
-AC_ARG_WITH(system-libtldl,
-[  --with-system-libtldl   Use the libltdl installed in your system (default=use our own)],
+AC_ARG_WITH(system-libltdl,
+[  --with-system-libltdl   Use the libltdl installed in your system (default=use our own)],
 [
 LIBLTDL="-lltdl"
-INCLTDL=
+INCLTDL=-DWITH_SYSTEM_LTDL
 LTDL_SUBDIRS=
 enable_ltdl_install=no
 ],
 [
+dnl If libltdl isn't installable, set it to be installable.
+[test x"$enable_ltdl_install" = x && enable_ltdl_install=yes]
 AC_LIBLTDL_INSTALLABLE
 
 dnl tell Makefile to build ltdl if needed
@@ -93,7 +102,8 @@ AC_SUBST(LTDL_SUBDIRS)
 dnl use system-wide libtool, if it exists
 AC_ARG_WITH(system-libtool,
 [  --with-system-libtool   Use the libtool installed in your system (default=use our own)],
-[ AC_PATH_PROG(LIBTOOL, libtool,,$PATH:/usr/local/bin) ],
+[ AC_PATH_PROG(LIBTOOL, libtool,,$PATH:/usr/local/bin) AC_LIBTOOL_DLOPEN
+ AC_PROG_LIBTOOL],
 [
   LIBTOOL="`pwd`/libtool"
   AC_SUBST(LIBTOOL)
@@ -249,16 +259,19 @@ if test "x$WITH_VMPS" = "xyes"; then
 fi
 
 dnl extra argument: --with-dhcp
+WITH_DHCP=yes
 AC_ARG_WITH(dhcp,
-[  --with-dhcp             Compile in DHCP support. (default=no)],
+[  --with-dhcp             Compile in DHCP support. (default=yes)],
 [ case "$withval" in
     yes)
-        AC_DEFINE(WITH_DHCP, [1], [Include experimental support for DHCP])
-       ;;
+        ;;
     *)
-       ;;
+       WITH_DHCP=no
   esac ]
 )
+if test "x$WITH_DHCP" = "xyes"; then
+       AC_DEFINE(WITH_DHCP, [1], [define if you want DHCP support])
+fi
 
 
 dnl #
@@ -617,6 +630,8 @@ AC_CHECK_HEADERS( \
        prot.h \
        pwd.h \
        grp.h \
+       stddef.h \
+        fnmatch.h \
        sia.h \
        siad.h
 )
@@ -629,9 +644,19 @@ AC_CHECK_HEADERS(net/if.h, [], [],
 ])
 
 REGEX=no
+AC_CHECK_HEADER(pcreposix.h, AC_DEFINE(HAVE_PCREPOSIX_H, [], [define this if we have the <pcreposix.h> header file]))
+if test "x$ac_cv_header_pcreposix_h" = "xyes"; then
+  AC_DEFINE(HAVE_REGEX_H [], [define if we have any regex])
+  REGEX_EXTENDED=yes
+  REGEX_PCRE=yes
+  REGEX=yes
+  LIBS="$LIBS -lpcreposix"
+else
+
 AC_CHECK_HEADER(regex.h, AC_DEFINE(HAVE_REGEX_H, [], [define this if we have the <regex.h> header file]))
 if test "x$ac_cv_header_regex_h" = "xyes"; then
   REGEX_EXTENDED=no
+  REGEX_PCRE=no
   REGEX=yes
   AC_EGREP_CPP(yes,
     [#include <regex.h>
@@ -640,7 +665,10 @@ if test "x$ac_cv_header_regex_h" = "xyes"; then
      #endif
      ], [AC_DEFINE(HAVE_REG_EXTENDED, [], [define this if we have REG_EXTENDED (from <regex.h>)]) REGEX_EXTENDED=yes])
 fi
+fi
+
 AC_SUBST(REGEX)
+AC_SUBST(REGEX_PCRE)
 AC_SUBST(REGEX_EXTENDED)
 
 dnl #
@@ -673,6 +701,10 @@ if test "x$WITH_OPENSSL" = xyes; then
        openssl/crypto.h \
        openssl/err.h \
        openssl/evp.h \
+       openssl/md5.h \
+       openssl/md4.h \
+       openssl/sha.h \
+       openssl/ocsp.h \
        openssl/engine.h,
        [],
        OPENSSL_LIBS=
@@ -714,6 +746,15 @@ else
        [ PCAP_LIBS=
        AC_MSG_WARN([pcap.h not found, silently disabling the RADIUS sniffer.])
        ])
+
+    AC_CHECK_LIB(pcap, pcap_fopen_offline,
+       [ AC_DEFINE(HAVE_PCAP_FOPEN_OFFLINE, 1,
+               [Define to 1 if you have the function pcap_fopen_offline.])
+       ])
+    AC_CHECK_LIB(pcap, pcap_dump_fopen,
+       [ AC_DEFINE(HAVE_PCAP_DUMP_FOPEN, 1,
+               [Define to 1 if you have the function pcap_dump_fopen.])
+       ])
 fi
 AC_SUBST(PCAP_LIBS)
 
@@ -905,13 +946,6 @@ else
 fi
 AC_SUBST(LIBPREFIX)
 
-dnl #
-dnl # Set Default CFLAGS
-dnl #
-if test "x$GCC" = "xyes"; then
-    CFLAGS="$CFLAGS -Wall -D_GNU_SOURCE"
-fi
-
 AC_MSG_CHECKING(for developer gcc flags)
 if test "x$developer" = "xyes" -a "x$GCC" = "xyes"; then
   devflags="-g -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -W -Wredundant-decls -Wundef"
@@ -933,6 +967,11 @@ dnl #  7. Checks for library functions
 dnl #
 dnl #############################################################
 
+old_LIBS="$LIBS"
+LIBS="$LIBS $LIBLTDL"
+AC_CHECK_FUNC(lt_dladvise_init, AC_DEFINE(HAVE_LT_DLADVISE_INIT, [], [Do we have the lt_dladvise_init function]))
+LIBS="$old_LIBS"
+
 dnl Check for libcrypt
 dnl We use crypt(3) which may be in libc, or in libcrypt (eg FreeBSD)
 AC_CHECK_LIB(crypt, crypt,
@@ -1184,6 +1223,7 @@ AC_OUTPUT(\
        ./Make.inc \
        ./src/include/build-radpaths-h \
        ./src/main/Makefile \
+       ./src/main/radsniff.mk \
        ./src/main/checkrad.pl \
        ./src/main/radlast \
        ./src/main/radtest \