+# -*- text -*-
+##
+## sql.conf -- SQL modules
+##
+## $Id$
+
+######################################################################
#
-# Configuration for the SQL module, when using MySQL.
+# Configuration for the SQL module
#
-# The database schema is available at:
+# The database schemas and queries are located in subdirectories:
#
-# src/radiusd/src/modules/rlm_sql/drivers/rlm_sql_mysql/db_mysql.sql
+# sql/DB/schema.sql Schema
+# sql/DB/dialup.conf Basic dialup (including policy) queries
+# sql/DB/counter.conf counter
+# sql/DB/ippool.conf IP Pools in SQL
+# sql/DB/ippool.sql schema for IP pools.
#
-# If you are using PostgreSQL, please use 'postgresql.conf', instead.
-# If you are using MS-SQL, please use 'mssql.conf', instead.
+# Where "DB" is mysql, mssql, oracle, or postgresql.
#
+
sql {
+ #
+ # Set the database to one of:
+ #
+ # mysql, mssql, oracle, postgresql
+ #
+ database = "mysql"
- # Database type
- # Current supported are: rlm_sql_mysql, rlm_sql_postgresql,
- # rlm_sql_iodbc, rlm_sql_oracle, rlm_sql_unixodbc, rlm_sql_freetds
- driver = "rlm_sql_mysql"
+ #
+ # Which FreeRADIUS driver to use.
+ #
+ driver = "rlm_sql_${database}"
- # Connect info
+ # Connection info:
server = "localhost"
- login = "root"
- password = "rootpass"
-
- # Database table configuration
+ #port = 3306
+ login = "radius"
+ password = "radpass"
+
+ # Database table configuration for everything except Oracle
radius_db = "radius"
-
+ # If you are using Oracle then use this instead
+ # radius_db = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))"
+
# If you want both stop and start records logged to the
# same SQL table, leave this as is. If you want them in
# different tables, put the start table in acct_table1
# and stop table in acct_table2
acct_table1 = "radacct"
acct_table2 = "radacct"
-
+
+ # Allow for storing data after authentication
+ postauth_table = "radpostauth"
+
authcheck_table = "radcheck"
authreply_table = "radreply"
-
+
groupcheck_table = "radgroupcheck"
groupreply_table = "radgroupreply"
-
- usergroup_table = "usergroup"
-
+
+ # Table to keep group info
+ usergroup_table = "radusergroup"
+
+ # If set to 'yes' (default) we read the group tables
+ # If set to 'no' the user MUST have Fall-Through = Yes in the radreply table
+ # read_groups = yes
+
# Remove stale session if checkrad does not see a double login
deletestalesessions = yes
# connection (per_socket)
connect_failure_retry_delay = 60
- #######################################################################
- # Query config: Username
- #######################################################################
- # This is the username that will get substituted, escaped, and added
- # as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below
- # everywhere a username substitution is needed so you you can be sure
- # the username passed from the client is escaped properly.
- #
- # Uncomment the next line, if you want the sql_user_name to mean:
- #
- # Use Stripped-User-Name, if it's there.
- # Else use User-Name, if it's there,
- # Else use hard-coded string "none" as the user name.
- #sql_user_name = "%{Stripped-User-Name:-%{User-Name:-none}}"
- #
- sql_user_name = "%{User-Name}"
-
-
- #######################################################################
- # Authorization Queries
- #######################################################################
- # These queries compare the check items for the user
- # in ${authcheck_table} and setup the reply items in
- # ${authreply_table}. You can use any query/tables
- # you want, but the return data for each row MUST
- # be in the following order:
- #
- # 0. Row ID (currently unused)
- # 1. UserName/GroupName
- # 2. Item Attr Name
- # 3. Item Attr Value
- # 4. Item Attr Operation
- #######################################################################
- # Use these for case sensitive usernames. WARNING: Slower queries!
-# authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM ${authcheck_table} WHERE STRCMP(Username, '%{SQL-User-Name}') = 0 ORDER BY id"
-# authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM ${authreply_table} WHERE STRCMP(Username, '%{SQL-User-Name}') = 0 ORDER BY id"
-
- authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM ${authcheck_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
- authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM ${authreply_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
-
- # Use these for case sensitive usernames. WANRING: Slower queries!
-# authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.op FROM ${groupcheck_table},${usergroup_table} WHERE STRCMP(${usergroup_table}.Username, '%{SQL-User-Name}') = 0 AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id"
-# authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.op FROM ${groupreply_table},${usergroup_table} WHERE STRCMP(${usergroup_table}.Username, '%{SQL-User-Name}') = 0 AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id"
-
- authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.op FROM ${groupcheck_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id"
- authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.op FROM ${groupreply_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id"
-
-
- #######################################################################
- # Accounting Queries
- #######################################################################
- # accounting_onoff_query - query for Accounting On/Off packets
- # accounting_update_query - query for Accounting update packets
- # accounting_start_query - query for Accounting start packets
- # accounting_start_query_alt - query for Accounting start packets
- # (alternate in case first query fails)
- # accounting_stop_query - query for Accounting stop packets
- # accounting_stop_query_alt - query for Accounting start packets
- # (alternate in case first query doesn't
- # affect any existing rows in the table)
- #######################################################################
- accounting_onoff_query = "UPDATE ${acct_table1} SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time} WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
-
- accounting_update_query = "UPDATE ${acct_table1} SET FramedIPAddress = '%{Framed-IP-Address}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStopTime = 0"
-
- accounting_start_query = "INSERT into radacct (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
-
- accounting_start_query_alt = "UPDATE ${acct_table1} SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
-
- accounting_stop_query = "UPDATE ${acct_table1} SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
-
- accounting_stop_query_alt = "INSERT into radacct (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '0', '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
-
- #######################################################################
- # Simultaneous Use Checking Queries
- #######################################################################
- # simul_count_query - query for the number of current connections
- # - If this is not defined, no simultaneouls use checking
- # - will be performed by this module instance
- # simul_verify_query - query to return details of current connections for verification
- # - Leave blank or commented out to disable verification step
- # - Note that the returned field order should not be changed.
- #######################################################################
-
- # Uncomment simul_count_query to enable simultaneous use checking
- # simul_count_query = "SELECT COUNT(*) FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
- simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CalledStationId, FramedProtocol FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
-
- #######################################################################
- # Group Membership Queries
- #######################################################################
- # group_membership_query - Check user group membership
- #######################################################################
-
- group_membership_query = "SELECT GroupName FROM ${usergroup_table} WHERE UserName='%{SQL-User-Name}'"
+ # lifetime of an SQL socket. If you are having network issues
+ # such as TCP sessions expiring, you may need to set the socket
+ # lifetime. If set to non-zero, any open connections will be
+ # closed "lifetime" seconds after they were first opened.
+ lifetime = 0
+
+ # Maximum number of queries used by an SQL socket. If you are
+ # having issues with SQL sockets lasting "too long", you can
+ # limit the number of queries performed over one socket. After
+ # "max_qeuries", the socket will be closed. Use 0 for "no limit".
+ max_queries = 0
+
+ # Set to 'yes' to read radius clients from the database ('nas' table)
+ # Clients will ONLY be read on server startup. For performance
+ # and security reasons, finding clients via SQL queries CANNOT
+ # be done "live" while the server is running.
+ #
+ #readclients = yes
+
+ # Table to keep radius client info
+ nas_table = "nas"
+
+ # Read driver-specific configuration
+ $INCLUDE sql/${database}/dialup.conf
}
projects / freeradius.git / blobdiff