#include "eapol_supp/eapol_supp_sm.h"
#include "eap_peer/eap.h"
#include "eloop.h"
-#include "wpa.h"
+#include "rsn_supp/wpa.h"
#include "eap_peer/eap_i.h"
#include "wpa_supplicant_i.h"
#include "radius/radius.h"
extern int wpa_debug_level;
extern int wpa_debug_show_keys;
-struct wpa_driver_ops *wpa_supplicant_drivers[] = { NULL };
+struct wpa_driver_ops *wpa_drivers[] = { NULL };
struct extra_radius_attr {
}
+static struct extra_radius_attr *
+find_extra_attr(struct extra_radius_attr *attrs, u8 type)
+{
+ struct extra_radius_attr *p;
+ for (p = attrs; p; p = p->next) {
+ if (p->type == type)
+ return p;
+ }
+ return NULL;
+}
+
+
static void ieee802_1x_encapsulate_radius(struct eapol_test_data *e,
const u8 *eap, size_t len)
{
goto fail;
}
- if (!radius_msg_add_attr(msg, RADIUS_ATTR_NAS_IP_ADDRESS,
+ if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_NAS_IP_ADDRESS) &&
+ !radius_msg_add_attr(msg, RADIUS_ATTR_NAS_IP_ADDRESS,
(u8 *) &e->own_ip_addr, 4)) {
printf("Could not add NAS-IP-Address\n");
goto fail;
os_snprintf(buf, sizeof(buf), RADIUS_802_1X_ADDR_FORMAT,
MAC2STR(e->wpa_s->own_addr));
- if (!radius_msg_add_attr(msg, RADIUS_ATTR_CALLING_STATION_ID,
+ if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_CALLING_STATION_ID)
+ &&
+ !radius_msg_add_attr(msg, RADIUS_ATTR_CALLING_STATION_ID,
(u8 *) buf, os_strlen(buf))) {
printf("Could not add Calling-Station-Id\n");
goto fail;
/* TODO: should probably check MTU from driver config; 2304 is max for
* IEEE 802.11, but use 1400 to avoid problems with too large packets
*/
- if (!radius_msg_add_attr_int32(msg, RADIUS_ATTR_FRAMED_MTU, 1400)) {
+ if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_FRAMED_MTU) &&
+ !radius_msg_add_attr_int32(msg, RADIUS_ATTR_FRAMED_MTU, 1400)) {
printf("Could not add Framed-MTU\n");
goto fail;
}
- if (!radius_msg_add_attr_int32(msg, RADIUS_ATTR_NAS_PORT_TYPE,
+ if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_NAS_PORT_TYPE) &&
+ !radius_msg_add_attr_int32(msg, RADIUS_ATTR_NAS_PORT_TYPE,
RADIUS_NAS_PORT_TYPE_IEEE_802_11)) {
printf("Could not add NAS-Port-Type\n");
goto fail;
}
os_snprintf(buf, sizeof(buf), "%s", e->connect_info);
- if (!radius_msg_add_attr(msg, RADIUS_ATTR_CONNECT_INFO,
+ if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_CONNECT_INFO) &&
+ !radius_msg_add_attr(msg, RADIUS_ATTR_CONNECT_INFO,
(u8 *) buf, os_strlen(buf))) {
printf("Could not add Connect-Info\n");
goto fail;
/* State attribute must be copied if and only if this packet is
* Access-Request reply to the previous Access-Challenge */
- if (e->last_recv_radius && e->last_recv_radius->hdr->code ==
+ if (e->last_recv_radius &&
+ radius_msg_get_hdr(e->last_recv_radius)->code ==
RADIUS_CODE_ACCESS_CHALLENGE) {
int res = radius_msg_copy_attr(msg, e->last_recv_radius,
RADIUS_ATTR_STATE);
fail:
radius_msg_free(msg);
- os_free(msg);
}
ctx->eapol_send = eapol_test_eapol_send;
ctx->set_config_blob = eapol_test_set_config_blob;
ctx->get_config_blob = eapol_test_get_config_blob;
-#ifdef EAP_TLS_OPENSSL
ctx->opensc_engine_path = wpa_s->conf->opensc_engine_path;
ctx->pkcs11_engine_path = wpa_s->conf->pkcs11_engine_path;
ctx->pkcs11_module_path = wpa_s->conf->pkcs11_module_path;
-#endif /* EAP_TLS_OPENSSL */
wpa_s->eapol = eapol_sm_init(ctx);
if (wpa_s->eapol == NULL) {
radius_client_deinit(e->radius);
os_free(e->last_eap_radius);
- if (e->last_recv_radius) {
- radius_msg_free(e->last_recv_radius);
- os_free(e->last_recv_radius);
- }
+ radius_msg_free(e->last_recv_radius);
+ e->last_recv_radius = NULL;
os_free(e->eap_identity);
e->eap_identity = NULL;
eapol_sm_deinit(wpa_s->eapol);
static void ieee802_1x_get_keys(struct eapol_test_data *e,
struct radius_msg *msg, struct radius_msg *req,
- u8 *shared_secret, size_t shared_secret_len)
+ const u8 *shared_secret,
+ size_t shared_secret_len)
{
struct radius_ms_mppe_keys *keys;
/* Process the RADIUS frames from Authentication Server */
static RadiusRxResult
ieee802_1x_receive_auth(struct radius_msg *msg, struct radius_msg *req,
- u8 *shared_secret, size_t shared_secret_len,
+ const u8 *shared_secret, size_t shared_secret_len,
void *data)
{
struct eapol_test_data *e = data;
+ struct radius_hdr *hdr = radius_msg_get_hdr(msg);
/* RFC 2869, Ch. 5.13: valid Message-Authenticator attribute MUST be
* present when packet contains an EAP-Message attribute */
- if (msg->hdr->code == RADIUS_CODE_ACCESS_REJECT &&
+ if (hdr->code == RADIUS_CODE_ACCESS_REJECT &&
radius_msg_get_attr(msg, RADIUS_ATTR_MESSAGE_AUTHENTICATOR, NULL,
0) < 0 &&
radius_msg_get_attr(msg, RADIUS_ATTR_EAP_MESSAGE, NULL, 0) < 0) {
return RADIUS_RX_UNKNOWN;
}
- if (msg->hdr->code != RADIUS_CODE_ACCESS_ACCEPT &&
- msg->hdr->code != RADIUS_CODE_ACCESS_REJECT &&
- msg->hdr->code != RADIUS_CODE_ACCESS_CHALLENGE) {
+ if (hdr->code != RADIUS_CODE_ACCESS_ACCEPT &&
+ hdr->code != RADIUS_CODE_ACCESS_REJECT &&
+ hdr->code != RADIUS_CODE_ACCESS_CHALLENGE) {
printf("Unknown RADIUS message code\n");
return RADIUS_RX_UNKNOWN;
}
e->radius_identifier = -1;
wpa_printf(MSG_DEBUG, "RADIUS packet matching with station");
- if (e->last_recv_radius) {
- radius_msg_free(e->last_recv_radius);
- os_free(e->last_recv_radius);
- }
-
+ radius_msg_free(e->last_recv_radius);
e->last_recv_radius = msg;
- switch (msg->hdr->code) {
+ switch (hdr->code) {
case RADIUS_CODE_ACCESS_ACCEPT:
e->radius_access_accept_received = 1;
ieee802_1x_get_keys(e, msg, req, shared_secret,
ieee802_1x_decapsulate_radius(e);
- if ((msg->hdr->code == RADIUS_CODE_ACCESS_ACCEPT &&
+ if ((hdr->code == RADIUS_CODE_ACCESS_ACCEPT &&
e->eapol_test_num_reauths < 0) ||
- msg->hdr->code == RADIUS_CODE_ACCESS_REJECT) {
+ hdr->code == RADIUS_CODE_ACCESS_REJECT) {
eloop_terminate();
}
}
-static void eapol_test_terminate(int sig, void *eloop_ctx,
- void *signal_ctx)
+static void eapol_test_terminate(int sig, void *signal_ctx)
{
- struct wpa_supplicant *wpa_s = eloop_ctx;
+ struct wpa_supplicant *wpa_s = signal_ctx;
wpa_msg(wpa_s, MSG_INFO, "Signal %d received - terminating", sig);
eloop_terminate();
}
return -1;
}
- if (eap_peer_register_methods()) {
+ if (eap_register_methods()) {
wpa_printf(MSG_ERROR, "Failed to register EAP methods");
return -1;
}
- if (eloop_init(&wpa_s)) {
+ if (eloop_init()) {
wpa_printf(MSG_ERROR, "Failed to initialize event loop");
return -1;
}
eloop_register_timeout(timeout, 0, eapol_test_timeout, &eapol_test,
NULL);
eloop_register_timeout(0, 0, send_eap_request_identity, &wpa_s, NULL);
- eloop_register_signal_terminate(eapol_test_terminate, NULL);
- eloop_register_signal_reconfig(eapol_test_terminate, NULL);
+ eloop_register_signal_terminate(eapol_test_terminate, &wpa_s);
+ eloop_register_signal_reconfig(eapol_test_terminate, &wpa_s);
eloop_run();
eloop_cancel_timeout(eapol_test_timeout, &eapol_test, NULL);
projects / libeap.git / blobdiff