-#Master config file, must be in /etc/radsecproxy or proxy's current directory
+# Master config file, must be in /etc/radsecproxy or specified with -c option
# All possible config options are listed below
-#
-# You must specify at least one of TLSCACertificateFile or TLSCACertificatePath
-# for TLS to work. We always verify peer certificate (both client and server)
-#TLSCACertificateFile /etc/cacerts/CA.pem
-TLSCACertificatePath /etc/cacerts
-
-# You must specify the below for TLS, we will always present our certificate
-TLSCertificateFile /etc/hostcertkey/host.example.com.pem
-TLSCertificateKeyFile /etc/hostcertkey/host.example.com.key.pem
-# Optionally specify password if key is encrypted (not very secure)
-TLSCertificateKeyPassword follow the white rabbit
+# First you may define any global options, these are:
+#
# You can optionally specify addresses and ports to listen on
-# Max one of each, below are just multiple examples
+# Multiple statements can be used for multiple ports/addresses
#ListenUDP *:1814
#listenUDP localhost
-#listenTCP 10.10.10.10:2084
-#ListenTCP [2001:700:1:7:215:f2ff:fe35:307d]:2084
-# Optional log level. 3 is default, 1 is less, 4 is more
+#ListenTCP [2001:700:1:7:215:f2ff:fe35:307d]:1812
+#listenTLS 10.10.10.10:2084
+#ListenTLS [2001:700:1:7:215:f2ff:fe35:307d]:2084
+#ListenDTLS [2001:700:1:7:215:f2ff:fe35:307d]:2084
+
+# To specify a certain address/port for UDP/TLS requests you can use e.g.
+#SourceUDP 127.0.0.1:33000
+#SourceTCP *:33000
+#SourceTLS *:33001
+#SourceDTLS *:33001
+# Optional log level. 3 is default, 1 is less, 5 is more
#LogLevel 3
-#Optional LogDestinatinon, else stderr used for logging
+# Optional LogDestination, else stderr used for logging
# Logging to file
#LogDestination file:///tmp/rp.log
# Or logging with Syslog. LOG_DAEMON used if facility not specified
# The supported facilities are LOG_DAEMON, LOG_MAIL, LOG_USER and
# LOG_LOCAL0, ..., LOG_LOCAL7
-#LogDestination x-syslog://
-#LogDestination x-syslog://log_local2
+#LogDestination x-syslog:///
+#LogDestination x-syslog:///log_local2
+
+# There is an option for doing some simple loop prevention. Note that
+# the LoopPrevention directive can be used in server blocks too,
+# overriding what's set here in the basic settings.
+#LoopPrevention on
+# Add TTL attribute with value 20 if not present (prevents endless loops)
+#addTTL 20
+
+# If we have TLS clients or servers we must define at least one tls block.
+# You can name them whatever you like and then reference them by name when
+# specifying clients or servers later. There are however three special names
+# "default", "defaultclient" and "defaultserver". If no name is defined for
+# a client, the "defaultclient" block will be used if it exists, if not the
+# "default" will be used. For a server, "defaultserver" followed by "default"
+# will be checked.
+#
+# The simplest configuration you can do is:
+tls default {
+ # You must specify at least one of CACertificateFile or CACertificatePath
+ # for TLS to work. We always verify peer certificate (client and server)
+ # CACertificateFile /etc/cacerts/CA.pem
+ CACertificatePath /etc/cacerts
+
+ # You must specify the below for TLS, we always present our certificate
+ CertificateFile /etc/hostcertkey/host.example.com.pem
+ CertificateKeyFile /etc/hostcertkey/host.example.com.key.pem
+ # Optionally specify password if key is encrypted (not very secure)
+ CertificateKeyPassword "follow the white rabbit"
+ # Optionally enable CRL checking
+ # CRLCheck on
+ # Optionally specify how long CAs and CRLs are cached, default forever
+ # CacheExpiry 3600
+ # Optionally require that peer certs have one of the specified policyOIDs
+ # policyoid 1.2.3 # this option can be used multiple times
+ # policyoid 1.3.4
+}
-#Now we configure clients, servers and realms. Note that these and
-#also the lines above may be in any order, except that a realm
-#can only be configured to use a server that is previously configured.
+# If you want one cert for all clients and another for all servers, use
+# defaultclient and defaultserver instead of default. If we wanted some
+# particular server to use something else you could specify a block
+# "tls myserver" and then reference that for that server. If you always
+# name the tls block in the client/server config you don't need a default
-#Also note that case insensitive regexp is used for realms, matching
-#the entire username string. The matching is done in the order the
-#realms are specified, using the first match found. Some examples are
-#"@example\.com$", "\.com$", ".*" and "^[a-z].*@example\.com$".
-#To treat local users separately you might try first specifying "@"
-#and after that ".*".
+# Now we configure clients, servers and realms. Note that these and
+# also the lines above may be in any order, except that a realm
+# can only be configured to use a server that is previously configured.
+
+# A realm can be a literal domain name, * which matches all, or a
+# regexp. A regexp is specified by the character prefix /
+# For regexp we do case insensitive matching of the entire username string.
+# The matching of realms is done in the order they are specified, using the
+# first match found. Some examples are
+# "@example\.com$", "\.com$", ".*" and "^[a-z].*@example\.com$".
+# To treat local users separately you might try first specifying "@"
+# and after that "*".
+
+# Configure a rewrite block if you want to add/remove/modify attributes
+# rewrite example {
+# # Remove NAS-Port.
+# removeAttribute 5
+# # Remove vendor attribute 100.
+# removeVendorAttribute 99:100
+# # Called-Station-Id = "123456"
+# addAttribute 30:123456
+# # Vendor-99-Attr-101 = 0x0f
+# addVendorAttribute 99:101:%0f
+# # Change users @local to @example.com.
+# modifyAttribute 1:/^(.*)@local$/\1@example.com/
+# }
client 2001:db8::1 {
type tls
secret verysecret
+# we could specify tls here, e.g.
+# tls myclient
+# in order to use tls parameters named myclient. We don't, so we will
+# use "tls defaultclient" if defined, or look for "tls default" as a
+# last resort
}
client 127.0.0.1 {
type udp
secret secret
+# Might do rewriting of incoming messages using rewrite block example
+# rewriteIn example
+# Can also do rewriting of outgoing messages
+# rewriteOut example
+}
+client 127.0.0.1 {
+ type tcp
+ secret secret
}
client radius.example.com {
- type TLS
+ type tls
# secret is optional for TLS
}
+client radius.example.com {
+ type dtls
+# secret is optional for DTLS
+}
server 127.0.0.1 {
type UDP
secret secret
+# Might do rewriting of incoming messages using rewrite block example
+# rewriteIn example
+# Can also do rewriting of outgoing messages
+# rewriteOut example
+# Might override loop prevention here too:
+# LoopPrevention off
}
-realm @eduroam\.cc$ {
+realm eduroam.cc {
server 127.0.0.1
+# If also want to use this server for accounting, specify
+# accountingServer 127.0.0.1
}
server 2001:db8::1 {
type TLS
port 2283
# secret is optional for TLS
+# we could specify tls here, e.g.
+# tls myserver
+# in order to use tls parameters named myserver. We don't, so we will
+# use "tls defaultserver" if defined, or look for "tls default" as a
+# last resort
}
server radius.example.com {
type tls
StatusServer on
# statusserver is optional, can be on or off. Off is default
}
+#server radius.example.com {
+# type dtls
+# secret verysecret
+# StatusServer on
+## statusserver is optional, can be on or off. Off is default
+#}
-realm @example\.com$ {
+# Equivalent to example.com
+realm /@example\.com$ {
server 2001:db8::1
}
-realm \.com$ {
- server 2001:db8::1
+# One can define a realm without servers, the proxy will then reject
+# and requests matching this. Optionally one can specify ReplyMessage
+# attribute to be included in the reject message. One can also use
+# AccountingResponse option to specify that the proxy should send such.
+realm /\.com$ {
+}
+realm /^anonymous$ {
+ replymessage "No Access"
+# AccountingResponse On
}
-realm .* {
+# The realm below is equivalent to /.*
+realm * {
server radius.example.com
}
+# If you don't have a default server you probably want to
+# reject all unknowns. Optionally you can also include a message
+#realm * {
+# replymessage "User unknown"
+#}
projects / libradsec.git / blobdiff