<dd>Getting an interface object path failed for an unknown reason.</dd>
</dl>
</li>
+
+ <li>
+ <h3>ExpectDisconnect ( ) --> nothing</h3>
+ <p>Notify wpa_supplicant of an externally triggered disconnection, e.g., due to system suspend.</p>
+ </li>
</ul>
\subsection dbus_main_properties Properties
</li>
<li>
+ <h3>Reconnect ( ) --> nothing</h3>
+ <p>Attempt reconnection and connect if in disconnected state.</p>
+ <h4>Possible errors</h4>
+ <dl>
+ <dt>fi.w1.wpa_supplicant1.InterfaceDisabled</dt>
+ <dd>The interface is disabled.</dd>
+ </dl>
+ </li>
+
+ <li>
<h3>AddBlob ( s : name, ay : data ) --> nothing</h3>
<p>Adds a blob to the interface.</p>
<h4>Arguments</h4>
</dl>
</li>
<li>
+ <h3>VendorElemAdd ( i: frame_id, ay: ielems ) --> nothing</h3>
+ <p>Add Vendor Elements to corresponding frame ID.</p>
+ <h4>Arguments</h4>
+ <dl>
+ <dt>i : frame_id</dt>
+ <dd>Frame ID for which Vendor specific IE is to be added.</dd>
+ <dt>ay : ielems</dt>
+ <dd>Information Element(s).</dd>
+ </dl>
+ <h4>Possible errors</h4>
+ <dl>
+ <dt>fi.w1.wpa_supplicant1.InvalidArgs</dt>
+ <dd>The "ielems" argument is not a properly formatted or size mismatch.</dd>
+ <dt>fi.w1.wpa_supplicant1.NoMemory</dt>
+ <dd>Needed memory was not possible to get allocated.</dd>
+ </dl>
+ </li>
+ <li>
+ <h3>VendorElemGet ( i: frame_id ) --> ay: ielems</h3>
+ <p>Get Vendor Elements of corresponding frame ID.</p>
+ <h4>Arguments</h4>
+ <dl>
+ <dt>i : frame_id</dt>
+ <dd>Frame ID for which Vendor specific IE is being queried.</dd>
+ <dt>ay : ielems</dt>
+ <dd>Information Element(s).</dd>
+ </dl>
+ <h4>Possible errors</h4>
+ <dl>
+ <dt>fi.w1.wpa_supplicant1.InvalidArgs</dt>
+ <dd>The "frame_id" argument is not valid.</dd>
+ </dl>
+ </li>
+ <li>
+ <h3>VendorElemRem ( i: frame_id, ay: ielems ) --> nothing</h3>
+ <p>Remove Vendor Elements of corresponding frame ID.</p>
+ <h4>Arguments</h4>
+ <dl>
+ <dt>i : frame_id</dt>
+ <dd>Frame ID for which Vendor specific IE is to be removed.</dd>
+ <dt>ay : ielems</dt>
+ <dd>Information Element(s) OR * to remove all.</dd>
+ </dl>
+ <h4>Possible errors</h4>
+ <dl>
+ <dt>fi.w1.wpa_supplicant1.InvalidArgs</dt>
+ <dd>The "ielems" argument is not a properly formatted or size mismatch.</dd>
+ <dt>fi.w1.wpa_supplicant1.NoMemory</dt>
+ <dd>Needed memory was not possible to get allocated.</dd>
+ </dl>
+ </li>
+ <li>
+ <h3>SaveConfig ( ) --> nothing</h3>
+ <p>Save configuration to the configuration file.</p>
+ </li>
+ <li>
<h3>EAPLogoff ( ) --> nothing</h3>
<p>IEEE 802.1X EAPOL state machine logoff.</p>
</li>
</li>
<li>
+ <h3>ConfigFile - s - (read)</h3>
+ <p>Configuration file path. Returns an empty string if no configuration file is in use.</p>
+ </li>
+
+ <li>
<h3>CurrentBSS - o - (read)</h3>
<p>Path to D-Bus object representing BSS which wpa_supplicant is associated with, or "/" if is not associated at all.</p>
</li>
<h3>DisconnectReason - i - (read)</h3>
<p>The most recent IEEE 802.11 reason code for disconnect. Negative value indicates locally generated disconnection.</p>
</li>
+
+ <li>
+ <h3>AssocStatusCode - i - (read)</h3>
+ <p>The most recent IEEE 802.11 status code for association rejection.</p>
+ </li>
+
+ <li>
+ <h3>EapolVersion - s - (read/write)</h3>
+ <p>IEEE 802.1X/EAPOL version number</p>
+ </li>
+
+ <li>
+ <h3>Bgscan - s - (read/write)</h3>
+ <p>Background scan and roaming parameters or an empty string if none</p>
+ </li>
+
+ <li>
+ <h3>DisableScanOffload - s - (read/write)</h3>
+ <p>Disable automatic offloading of scan requests</p>
+ </li>
+
+ <li>
+ <h3>OpenscEnginePath - s - (read/write)</h3>
+ <p>Path to the OpenSSL engine for opensc</p>
+ </li>
+
+ <li>
+ <h3>OpensslCiphers - s - (read/write)</h3>
+ <p>OpenSSL cipher string</p>
+ </li>
+
+ <li>
+ <h3>PcscReader - s - (read/write)</h3>
+ <p>PC/SC reader name prefix</p>
+ </li>
+
+ <li>
+ <h3>PcscPin - s - (read/write)</h3>
+ <p>PIN for USIM, GSM SIM, and smartcards</p>
+ </li>
+
+ <li>
+ <h3>ExternalSim - s - (read/write)</h3>
+ <p>Use external processing for SIM/USIM operations</p>
+ </li>
+
+ <li>
+ <h3>DriverParam - s - (read/write)</h3>
+ <p>Driver interface parameters</p>
+ </li>
+
+ <li>
+ <h3>Dot11RSNAConfigPMKLifetime - s - (read/write)</h3>
+ <p>Maximum lifetime of a PMK</p>
+ </li>
+
+ <li>
+ <h3>Dot11RSNAConfigPMKReauthThreshold - s - (read/write)</h3>
+ <p>PMK re-authentication threshold</p>
+ </li>
+
+ <li>
+ <h3>Dot11RSNAConfigSATimeout - s - (read/write)</h3>
+ <p>Security association timeout</p>
+ </li>
+
+ <li>
+ <h3>BssMaxCount - s - (read/write)</h3>
+ <p>Maximum number of BSS entries to keep in memory</p>
+ </li>
+
+ <li>
+ <h3>FilterSsids - s - (read/write)</h3>
+ <p>SSID-based scan result filtering</p>
+ </li>
+
+ <li>
+ <h3>FilterRssi - s - (read/write)</h3>
+ <p>RSSI-based scan result filtering</p>
+ </li>
+
+ <li>
+ <h3>MaxNumSta - s - (read/write)</h3>
+ <p>Maximum number of STAs in an AP/P2P GO</p>
+ </li>
+
+ <li>
+ <h3>DisassocLowAck - s - (read/write)</h3>
+ <p>Disassocicate stations with massive packet loss</p>
+ </li>
+
+ <li>
+ <h3>Interworking - s - (read/write)</h3>
+ <p>Whether Interworking (IEEE 802.11u) is enabled</p>
+ </li>
+
+ <li>
+ <h3>Hessid - s - (read/write)</h3>
+ <p>Homogenous ESS identifier</p>
+ </li>
+
+ <li>
+ <h3>AccessNetworkType - s - (read/write)</h3>
+ <p>Access Network Type</p>
+ </li>
+
+ <li>
+ <h3>PbcInM1 - s - (read/write)</h3>
+ <p>AP mode WPS probing workaround for PBC with Windows 7</p>
+ </li>
+
+ <li>
+ <h3>Autoscan - s - (read/write)</h3>
+ <p>Automatic scan parameters or an empty string if none</p>
+ </li>
+
+ <li>
+ <h3>WpsNfcDevPwId - s - (read/write)</h3>
+ <p>NFC Device Password ID for password token</p>
+ </li>
+
+ <li>
+ <h3>WpsNfcDhPubkey - s - (read/write)</h3>
+ <p>NFC DH Public Key for password token</p>
+ </li>
+
+ <li>
+ <h3>WpsNfcDhPrivkey - s - (read/write)</h3>
+ <p>NFC DH Private Key for password token</p>
+ </li>
+
+ <li>
+ <h3>WpsNfcDevPw - s - (read/write)</h3>
+ <p>NFC Device Password for password token</p>
+ </li>
+
+ <li>
+ <h3>ExtPasswordBackend - s - (read/write)</h3>
+ <p>External password backend or an empty string if none</p>
+ </li>
+
+ <li>
+ <h3>P2pGoMaxInactivity - s - (read/write)</h3>
+ <p>Timeout in seconds to detect STA inactivity</p>
+ </li>
+
+ <li>
+ <h3>AutoInterworking - s - (read/write)</h3>
+ <p>Whether to use network selection automatically</p>
+ </li>
+
+ <li>
+ <h3>Okc - s - (read/write)</h3>
+ <p>Whether to enable opportunistic key caching by default</p>
+ </li>
+
+ <li>
+ <h3>Pmf - s - (read/write)</h3>
+ <p>Whether to enable/require PMF by default</p>
+ </li>
+
+ <li>
+ <h3>SaeGroups - s - (read/write)</h3>
+ <p>Preference list of enabled groups for SAE</p>
+ </li>
+
+ <li>
+ <h3>DtimPeriod - s - (read/write)</h3>
+ <p>Default DTIM period in Beacon intervals</p>
+ </li>
+
+ <li>
+ <h3>BeaconInt - s - (read/write)</h3>
+ <p>Default Beacon interval in TU</p>
+ </li>
+
+ <li>
+ <h3>IgnoreOldScanRes - s - (read/write)</h3>
+ <p>Ignore scan results older than request</p>
+ </li>
+
+ <li>
+ <h3>FreqList - s - (read/write)</h3>
+ <p>Array of allowed scan frequencies or an empty string for all</p>
+ </li>
+
+ <li>
+ <h3>ScanCurFreq - s - (read/write)</h3>
+ <p>Whether to scan only the current channel</p>
+ </li>
+
+ <li>
+ <h3>SchedScanInterval - s - (read/write)</h3>
+ <p>schedule scan interval</p>
+ </li>
+
+ <li>
+ <h3>TdlsExternalControl - s - (read/write)</h3>
+ <p>External control for TDLS setup requests</p>
+ </li>
+
+ <li>
+ <h3>OsuDir - s - (read/write)</h3>
+ <p>OSU provider information directory</p>
+ </li>
+
+ <li>
+ <h3>WowlanTriggers - s - (read/write)</h3>
+ <p>Wake-on-WLAN triggers</p>
+ </li>
+
+ <li>
+ <h3>P2pSearchDelay - s - (read/write)</h3>
+ <p>Extra delay between concurrent search iterations</p>
+ </li>
+
+ <li>
+ <h3>MacAddr - s - (read/write)</h3>
+ <p>MAC address policy default</p>
+ </li>
+
+ <li>
+ <h3>RandAddrLifetime - s - (read/write)</h3>
+ <p>Lifetime of random MAC address in seconds</p>
+ </li>
+
+ <li>
+ <h3>PreassocMacAddr - s - (read/write)</h3>
+ <p>Pre-association MAC address policy</p>
+ </li>
+
+ <li>
+ <h3>KeyMgmtOffload - s - (read/write)</h3>
+ <p>Use key management offload</p>
+ </li>
+
+ <li>
+ <h3>PassiveScan - s - (read/write)</h3>
+ <p>Whether to force passive scan for network connection</p>
+ </li>
+
+ <li>
+ <h3>ReassocSameBssOptim - s - (read/write)</h3>
+ <p>Whether to optimize reassoc-to-same-BSS</p>
+ </li>
+
+ <li>
+ <h3>WpsPriority - s - (read/write)</h3>
+ <p>Priority for the networks added through WPS</p>
+ </li>
</ul>
\subsection dbus_interface_signals Signals
<h4>Arguments</h4>
<dl>
<dt>s : event</dt>
- <dd>Event type. Possible values are: "success, "fail" and "m2d"</dd>
+ <dd>Event type. Possible values are: "success, "fail", "m2d", and
+ "pbc-overlap".</dd>
<dt>a{sv} : args</dt>
<dd>
- Event arguments. Empty for success event, one entry ( "msg" : i ) for fail event and following entries for m2d event:
+ Event arguments. Empty for success and pbc-overlap events, error information ( "msg" : i, "config_error" : i, "error_indication" : i ) for fail event and following entries for m2d event:
<table>
<tr><th>config_methods</th><th>Value type</th>
<tr><td>manufacturer</td><td>q</td>
<table>
<tr><th>Key</th><th>Value type</th><th>Description</th><th>Required</th></tr>
<tr><td>Timeout</td><td>i</td><td>Timeout for operating in seconds</td><td>no</td></tr>
- <tr><td>RequestedDevicesTypes</td><td>aay</td><td>WPS Device Types to search for</td><td>no</td></tr>
+ <tr><td>RequestedDeviceTypes</td><td>aay</td><td>WPS Device Types to search for</td><td>no</td></tr>
<tr><td>DiscoveryType</td><td>s</td><td>"start_with_full" (default, if not specified), "social", "progressive"</td><td>no</td></tr>
</table>
</dd>
</li>
<li>
+ <h3>RemoveClient ( a{sv} : args ) --> nothing</h3>
+ <p>Remove the client from all groups (operating and persistent) from the local GO.</p>
+ <h4>Arguments</h4>
+ <dl>
+ <dt>a{sv} : args</dt>
+ <dd>
+ A dictionary with parameters for removing a client:
+ <table>
+ <tr><th>Key</th><th>Value type</th><th>Description</th><th>Required</th></tr>
+ <tr><td>peer</td><td>o</td><td>Object path for peer's P2P Device Address</td><td>yes</td></tr>
+ <tr><td>iface</td><td>s</td><td>Interface address[MAC Address format] of the peer to be disconnected. Required if object path is not provided.</td><td>no</td></tr>
+ </table>
+ </dd>
+ </dl>
+ </li>
+
+ <li>
<h3>Flush ( nothing ) --> nothing</h3>
<p>Flush P2P peer table and state.</p>
</li>
<tr><td>GOIntent</td><td>u</td><td></td></tr>
<tr><td>PersistentReconnect</td><td>b</td><td></td></tr>
<tr><td>ListenRegClass</td><td>u</td><td></td></tr>
+ <tr><td>ListenChannel</td><td>u</td><td></td></tr>
<tr><td>OperRegClass</td><td>u</td><td></td></tr>
<tr><td>OperChannel</td><td>u</td><td></td></tr>
<tr><td>SsidPostfix</td><td>s</td><td></td></tr>
</li>
<li>
+ <h3>DeviceFoundProperties ( o : path, a{sv} : properties )</h3>
+ <p>A new peer device has been found.</p>
+ <h4>Arguments</h4>
+ <dl>
+ <dt>o : path</dt>
+ <dd>A D-Bus path to an object representing the found peer device.</dd>
+ </dl>
+ <dl>
+ <dt>a{sv} : properties</dt>
+ <dd>A dictionary containing properties of the found peer device.</dd>
+ </dl>
+ </li>
+
+ <li>
<h3>DeviceLost ( o : path )</h3>
</li>
</li>
<li>
- <h3>GONegotiationRequest ( o : path, i : dev_passwd_id )</h3>
+ <h3>GONegotiationRequest ( o : path, q : dev_passwd_id, y : device_go_intent )</h3>
</li>
<li>
</dd>
</dl>
</li>
+
+ <li>
+ <h3>InvitationReceived ( a{sv} : properties )</h3>
+ <p></p>
+ <h4>Arguments</h4>
+ <dl>
+ <dt>a{sv} : properties</dt>
+ <dd>A dictionary with following information:
+ <table>
+ <tr><th>Key</th><th>Value type</th><th>Description</th></tr>
+ <tr><td>sa</td><td>ay</td><td>Optionally present</td></tr>
+ <tr><td>go_dev_addr</td><td>ay</td><td>Optionally present</td></tr>
+ <tr><td>bssid</td><td>ay</td><td>Optionally present</td></tr>
+ <tr><td>persistent_id</td><td>i</td><td>Optionally present</td></tr>
+ <tr><td>op_freq</td><td>i</td><td></td></tr>
+ </table>
+ </dd>
+ </dl>
+ </li>
+
+ <li>
+ <h3>GroupFormationFailure ( s : reason )</h3>
+ <p></p>
+ <h4>Arguments</h4>
+ <dl>
+ <dt>s : reason</dt>
+ <dd>Reason for failure or empty string if not known.</dd>
+ </dl>
+ </li>
</ul>
\section dbus_bss fi.w1.wpa_supplicant1.BSS
</li>
<li>
+ <h3>ModelName - s - (read)</h3>
+ </li>
+
+ <li>
+ <h3>ModelNumber - s - (read)</h3>
+ </li>
+
+ <li>
+ <h3>SerialNumber - s - (read)</h3>
+ </li>
+
+ <li>
<h3>PrimaryDeviceType - ay - (read)</h3>
</li>
projects / mech_eap.git / blobdiff