ChangeLog for hostapd
+2016-10-02 - v2.6
+ * fixed EAP-pwd last fragment validation
+ [http://w1.fi/security/2015-7/] (CVE-2015-5314)
+ * fixed WPS configuration update vulnerability with malformed passphrase
+ [http://w1.fi/security/2016-1/] (CVE-2016-4476)
+ * extended channel switch support for VHT bandwidth changes
+ * added support for configuring new ANQP-elements with
+ anqp_elem=<InfoID>:<hexdump of payload>
+ * fixed Suite B 192-bit AKM to use proper PMK length
+ (note: this makes old releases incompatible with the fixed behavior)
+ * added no_probe_resp_if_max_sta=1 parameter to disable Probe Response
+ frame sending for not-associated STAs if max_num_sta limit has been
+ reached
+ * added option (-S as command line argument) to request all interfaces
+ to be started at the same time
+ * modified rts_threshold and fragm_threshold configuration parameters
+ to allow -1 to be used to disable RTS/fragmentation
+ * EAP-pwd: added support for Brainpool Elliptic Curves
+ (with OpenSSL 1.0.2 and newer)
+ * fixed EAPOL reauthentication after FT protocol run
+ * fixed FTIE generation for 4-way handshake after FT protocol run
+ * fixed and improved various FST operations
+ * TLS server
+ - support SHA384 and SHA512 hashes
+ - support TLS v1.2 signature algorithm with SHA384 and SHA512
+ - support PKCS #5 v2.0 PBES2
+ - support PKCS #5 with PKCS #12 style key decryption
+ - minimal support for PKCS #12
+ - support OCSP stapling (including ocsp_multi)
+ * added support for OpenSSL 1.1 API changes
+ - drop support for OpenSSL 0.9.8
+ - drop support for OpenSSL 1.0.0
+ * EAP-PEAP: support fast-connect crypto binding
+ * RADIUS
+ - fix Called-Station-Id to not escape SSID
+ - add Event-Timestamp to all Accounting-Request packets
+ - add Acct-Session-Id to Accounting-On/Off
+ - add Acct-Multi-Session-Id ton Access-Request packets
+ - add Service-Type (= Frames)
+ - allow server to provide PSK instead of passphrase for WPA-PSK
+ Tunnel_password case
+ - update full message for interim accounting updates
+ - add Acct-Delay-Time into Accounting messages
+ - add require_message_authenticator configuration option to require
+ CoA/Disconnect-Request packets to be authenticated
+ * started to postpone WNM-Notification frame sending by 100 ms so that
+ the STA has some more time to configure the key before this frame is
+ received after the 4-way handshake
+ * VHT: added interoperability workaround for 80+80 and 160 MHz channels
+ * extended VLAN support (per-STA vif, etc.)
+ * fixed PMKID derivation with SAE
+ * nl80211
+ - added support for full station state operations
+ - fix IEEE 802.1X/WEP EAP reauthentication and rekeying to use
+ unencrypted EAPOL frames
+ * added initial MBO support; number of extensions to WNM BSS Transition
+ Management
+ * added initial functionality for location related operations
+ * added assocresp_elements parameter to allow vendor specific elements
+ to be added into (Re)Association Response frames
+ * improved Public Action frame addressing
+ - use Address 3 = wildcard BSSID in GAS response if a query from an
+ unassociated STA used that address
+ - fix TX status processing for Address 3 = wildcard BSSID
+ - add gas_address3 configuration parameter to control Address 3
+ behavior
+ * added command line parameter -i to override interface parameter in
+ hostapd.conf
+ * added command completion support to hostapd_cli
+ * added passive client taxonomy determination (CONFIG_TAXONOMY=y
+ compile option and "SIGNATURE <addr>" control interface command)
+ * number of small fixes
+
+2015-09-27 - v2.5
+ * fixed WPS UPnP vulnerability with HTTP chunked transfer encoding
+ [http://w1.fi/security/2015-2/] (CVE-2015-4141)
+ * fixed WMM Action frame parser
+ [http://w1.fi/security/2015-3/] (CVE-2015-4142)
+ * fixed EAP-pwd server missing payload length validation
+ [http://w1.fi/security/2015-4/]
+ (CVE-2015-4143, CVE-2015-4144, CVE-2015-4145)
+ * fixed validation of WPS and P2P NFC NDEF record payload length
+ [http://w1.fi/security/2015-5/]
+ * nl80211:
+ - fixed vendor command handling to check OUI properly
+ * fixed hlr_auc_gw build with OpenSSL
+ * hlr_auc_gw: allow Milenage RES length to be reduced
+ * disable HT for a station that does not support WMM/QoS
+ * added support for hashed password (NtHash) in EAP-pwd server
+ * fixed and extended dynamic VLAN cases
+ * added EAP-EKE server support for deriving Session-Id
+ * set Acct-Session-Id to a random value to make it more likely to be
+ unique even if the device does not have a proper clock
+ * added more 2.4 GHz channels for 20/40 MHz HT co-ex scan
+ * modified SAE routines to be more robust and PWE generation to be
+ stronger against timing attacks
+ * added support for Brainpool Elliptic Curves with SAE
+ * increases maximum value accepted for cwmin/cwmax
+ * added support for CCMP-256 and GCMP-256 as group ciphers with FT
+ * added Fast Session Transfer (FST) module
+ * removed optional fields from RSNE when using FT with PMF
+ (workaround for interoperability issues with iOS 8.4)
+ * added EAP server support for TLS session resumption
+ * fixed key derivation for Suite B 192-bit AKM (this breaks
+ compatibility with the earlier version)
+ * added mechanism to track unconnected stations and do minimal band
+ steering
+ * number of small fixes
+
+2015-03-15 - v2.4
+ * allow OpenSSL cipher configuration to be set for internal EAP server
+ (openssl_ciphers parameter)
+ * fixed number of small issues based on hwsim test case failures and
+ static analyzer reports
+ * fixed Accounting-Request to not include duplicated Acct-Session-Id
+ * add support for Acct-Multi-Session-Id in RADIUS Accounting messages
+ * add support for PMKSA caching with SAE
+ * add support for generating BSS Load element (bss_load_update_period)
+ * fixed channel switch from VHT to HT
+ * add INTERFACE-ENABLED and INTERFACE-DISABLED ctrl_iface events
+ * add support for learning STA IPv4/IPv6 addresses and configuring
+ ProxyARP support
+ * dropped support for the madwifi driver interface
+ * add support for Suite B (128-bit and 192-bit level) key management and
+ cipher suites
+ * fixed a regression with driver=wired
+ * extend EAPOL-Key msg 1/4 retry workaround for changing SNonce
+ * add BSS_TM_REQ ctrl_iface command to send BSS Transition Management
+ Request frames and BSS-TM-RESP event to indicate response to such
+ frame
+ * add support for EAP Re-Authentication Protocol (ERP)
+ * fixed AP IE in EAPOL-Key 3/4 when both WPA and FT was enabled
+ * fixed a regression in HT 20/40 coex Action frame parsing
+ * set stdout to be line-buffered
+ * add support for vendor specific VHT extension to enable 256 QAM rates
+ (VHT-MCS 8 and 9) on 2.4 GHz band
+ * RADIUS DAS:
+ - extend Disconnect-Request processing to allow matching of multiple
+ sessions
+ - support Acct-Multi-Session-Id as an identifier
+ - allow PMKSA cache entry to be removed without association
+ * expire hostapd STA entry if kernel does not have a matching entry
+ * allow chanlist to be used to specify a subset of channels for ACS
+ * improve ACS behavior on 2.4 GHz band and allow channel bias to be
+ configured with acs_chan_bias parameter
+ * do not reply to a Probe Request frame that includes DSS Parameter Set
+ element in which the channel does not match the current operating
+ channel
+ * add UPDATE_BEACON ctrl_iface command; this can be used to force Beacon
+ frame contents to be updated and to start beaconing on an interface
+ that used start_disabled=1
+ * fixed some RADIUS server failover cases
+
2014-10-09 - v2.3
* fixed number of minor issues identified in static analyzer warnings
* fixed DFS and channel switch operation for multi-BSS cases
projects / mech_eap.git / blobdiff