hostapd: Use stations nsts capability in (Re)Association Response frame

[mech_eap.git] / hostapd / hostapd.conf

diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index c19291d..4fc3278 100644 (file)
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -3,6 +3,8 @@
 
 # AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
 # management frames with the Host AP driver); wlan0 with many nl80211 drivers
+# Note: This attribute can be overridden by the values supplied with the '-i'
+# command line parameter.
 interface=wlan0
 
 # In case of atheros and nl80211 driver interfaces, an additional
@@ -683,6 +685,13 @@ wmm_ac_vo_acm=0
 #
 #vht_oper_centr_freq_seg1_idx=159
 
+# Workaround to use station's nsts capability in (Re)Association Response frame
+# This may be needed with some deployed devices as an interoperability
+# workaround for beamforming if the AP's capability is greater than the
+# station's capability. This is disabled by default and can be enabled by
+# setting use_sta_nsts=1.
+#use_sta_nsts=0
+
 ##### IEEE 802.1X-2004 related configuration ##################################
 
 # Require IEEE 802.1X authorization
@@ -1086,6 +1095,9 @@ own_ip_addr=127.0.0.1
 #
 # DAS require Event-Timestamp
 #radius_das_require_event_timestamp=1
+#
+# DAS require Message-Authenticator
+#radius_das_require_message_authenticator=1
 
 ##### RADIUS authentication server configuration ##############################