Updated through tag hostap_2_5 from git://w1.fi/hostap.git

[mech_eap.git] / libeap / hostapd / README

diff --git a/libeap/hostapd/README b/libeap/hostapd/README
index 1af487d..366b199 100644 (file)
--- a/libeap/hostapd/README
+++ b/libeap/hostapd/README
@@ -2,37 +2,22 @@ hostapd - user space IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP
          Authenticator and RADIUS authentication server
 ================================================================
 
-Copyright (c) 2002-2010, Jouni Malinen <j@w1.fi> and contributors
+Copyright (c) 2002-2015, Jouni Malinen <j@w1.fi> and contributors
 All Rights Reserved.
 
-This program is dual-licensed under both the GPL version 2 and BSD
-license. Either license may be used at your option.
+This program is licensed under the BSD license (the one with
+advertisement clause removed).
+
+If you are submitting changes to the project, please see CONTRIBUTIONS
+file for more instructions.
 
 
 
 License
 -------
 
-GPL v2:
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License version 2 as
-published by the Free Software Foundation.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-
-(this copy of the license is in COPYING file)
-
-
-Alternatively, this software may be distributed, used, and modified
-under the terms of BSD license:
+This software may be distributed, used, and modified under the terms of
+BSD license:
 
 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are
@@ -89,12 +74,6 @@ Current hardware/software requirements:
        Please note that station firmware version needs to be 1.7.0 or newer
        to work in WPA mode.
 
-       madwifi driver for cards based on Atheros chip set (ar521x)
-       (http://sourceforge.net/projects/madwifi/)
-       Please note that you will need to add the correct path for
-       madwifi driver root directory in .config (see defconfig file for
-       an example: CFLAGS += -I<path>)
-
        mac80211-based drivers that support AP mode (with driver=nl80211).
        This includes drivers for Atheros (ath9k) and Broadcom (b43)
        chipsets.