# This software may be distributed under the terms of the BSD license.
# See README for more details.
+from remotehost import remote_compatible
import time
import logging
logger = logging.getLogger()
import hostapd
from utils import HwsimSkip, skip_with_fips
from wlantest import Wlantest
+from test_ap_vht import vht_supported
-def start_ap_wpa2_psk(ifname):
+def start_ap_wpa2_psk(ap):
params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
- return hostapd.add_ap(ifname, params)
+ return hostapd.add_ap(ap, params)
def connectivity(dev, hapd):
hwsim_utils.test_connectivity_sta(dev[0], dev[1])
dev[1].connect("test-open", key_mgmt="NONE", scan_freq=scan_freq)
connectivity(dev, hapd)
-def wlantest_setup():
+def wlantest_setup(hapd):
+ Wlantest.setup(hapd)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
def tdls_check_ap(sta0, sta1, bssid, addr0, addr1):
wt = Wlantest()
- wt.tdls_clear(bssid, addr0, addr1);
+ wt.tdls_clear(bssid, addr0, addr1)
hwsim_utils.test_connectivity_sta(sta0, sta1)
[dl,inv_dl,ap,inv_ap] = wlantest_tdls_packet_counters(bssid, addr0, addr1)
if dl > 0:
hwsim_utils.test_connectivity(sta0, hapd)
hwsim_utils.test_connectivity(sta1, hapd)
-def setup_tdls(sta0, sta1, ap, reverse=False, expect_fail=False):
+def setup_tdls(sta0, sta1, hapd, reverse=False, expect_fail=False):
logger.info("Setup TDLS")
- hapd = hostapd.Hostapd(ap['ifname'])
check_connectivity(sta0, sta1, hapd)
- bssid = ap['bssid']
+ bssid = hapd.own_addr()
addr0 = sta0.p2p_interface_addr()
addr1 = sta1.p2p_interface_addr()
wt = Wlantest()
- wt.tdls_clear(bssid, addr0, addr1);
- wt.tdls_clear(bssid, addr1, addr0);
+ wt.tdls_clear(bssid, addr0, addr1)
+ wt.tdls_clear(bssid, addr1, addr0)
sta0.tdls_setup(addr1)
time.sleep(1)
if expect_fail:
if reverse:
addr1 = sta0.p2p_interface_addr()
addr0 = sta1.p2p_interface_addr()
- conf = wt.get_tdls_counter("setup_conf_ok", bssid, addr0, addr1);
+ conf = wt.get_tdls_counter("setup_conf_ok", bssid, addr0, addr1)
if conf == 0:
raise Exception("No TDLS Setup Confirm (success) seen")
tdls_check_dl(sta0, sta1, bssid, addr0, addr1)
check_connectivity(sta0, sta1, hapd)
-def teardown_tdls(sta0, sta1, ap, responder=False, wildcard=False):
+def teardown_tdls(sta0, sta1, hapd, responder=False, wildcard=False):
logger.info("Teardown TDLS")
- hapd = hostapd.Hostapd(ap['ifname'])
check_connectivity(sta0, sta1, hapd)
- bssid = ap['bssid']
+ bssid = hapd.own_addr()
addr0 = sta0.p2p_interface_addr()
addr1 = sta1.p2p_interface_addr()
if responder:
sta0.tdls_teardown(addr1)
time.sleep(1)
wt = Wlantest()
- teardown = wt.get_tdls_counter("teardown", bssid, addr0, addr1);
+ teardown = wt.get_tdls_counter("teardown", bssid, addr0, addr1)
if teardown == 0:
raise Exception("No TDLS Setup Teardown seen")
tdls_check_ap(sta0, sta1, bssid, addr0, addr1)
if connected:
raise Exception("Expected TDLS link status to be connected")
+@remote_compatible
def test_ap_tdls_discovery(dev, apdev):
"""WPA2-PSK AP and two stations using TDLS discovery"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
dev[0].request("TDLS_DISCOVER " + dev[1].p2p_interface_addr())
time.sleep(0.2)
def test_ap_wpa2_tdls(dev, apdev):
"""WPA2-PSK AP and two stations using TDLS"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
- setup_tdls(dev[0], dev[1], apdev[0])
- teardown_tdls(dev[0], dev[1], apdev[0])
- setup_tdls(dev[1], dev[0], apdev[0])
- #teardown_tdls(dev[0], dev[1], apdev[0])
+ setup_tdls(dev[0], dev[1], hapd)
+ teardown_tdls(dev[0], dev[1], hapd)
+ setup_tdls(dev[1], dev[0], hapd)
+ #teardown_tdls(dev[0], dev[1], hapd)
def test_ap_wpa2_tdls_concurrent_init(dev, apdev):
"""Concurrent TDLS setup initiation"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
dev[0].request("SET tdls_testing 0x80")
- setup_tdls(dev[1], dev[0], apdev[0], reverse=True)
+ setup_tdls(dev[1], dev[0], hapd, reverse=True)
def test_ap_wpa2_tdls_concurrent_init2(dev, apdev):
"""Concurrent TDLS setup initiation (reverse)"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
dev[1].request("SET tdls_testing 0x80")
- setup_tdls(dev[0], dev[1], apdev[0])
+ setup_tdls(dev[0], dev[1], hapd)
def test_ap_wpa2_tdls_decline_resp(dev, apdev):
"""Decline TDLS Setup Response"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
dev[1].request("SET tdls_testing 0x200")
- setup_tdls(dev[1], dev[0], apdev[0], expect_fail=True)
+ setup_tdls(dev[1], dev[0], hapd, expect_fail=True)
def test_ap_wpa2_tdls_long_lifetime(dev, apdev):
"""TDLS with long TPK lifetime"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
dev[1].request("SET tdls_testing 0x40")
- setup_tdls(dev[1], dev[0], apdev[0])
+ setup_tdls(dev[1], dev[0], hapd)
def test_ap_wpa2_tdls_long_frame(dev, apdev):
"""TDLS with long setup/teardown frames"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
dev[0].request("SET tdls_testing 0x1")
dev[1].request("SET tdls_testing 0x1")
- setup_tdls(dev[1], dev[0], apdev[0])
- teardown_tdls(dev[1], dev[0], apdev[0])
- setup_tdls(dev[0], dev[1], apdev[0])
+ setup_tdls(dev[1], dev[0], hapd)
+ teardown_tdls(dev[1], dev[0], hapd)
+ setup_tdls(dev[0], dev[1], hapd)
def test_ap_wpa2_tdls_reneg(dev, apdev):
"""Renegotiate TDLS link"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
- setup_tdls(dev[1], dev[0], apdev[0])
- setup_tdls(dev[0], dev[1], apdev[0])
+ setup_tdls(dev[1], dev[0], hapd)
+ setup_tdls(dev[0], dev[1], hapd)
def test_ap_wpa2_tdls_wrong_lifetime_resp(dev, apdev):
"""Incorrect TPK lifetime in TDLS Setup Response"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
dev[1].request("SET tdls_testing 0x10")
- setup_tdls(dev[0], dev[1], apdev[0], expect_fail=True)
+ setup_tdls(dev[0], dev[1], hapd, expect_fail=True)
def test_ap_wpa2_tdls_diff_rsnie(dev, apdev):
"""TDLS with different RSN IEs"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
dev[1].request("SET tdls_testing 0x2")
- setup_tdls(dev[1], dev[0], apdev[0])
- teardown_tdls(dev[1], dev[0], apdev[0])
+ setup_tdls(dev[1], dev[0], hapd)
+ teardown_tdls(dev[1], dev[0], hapd)
def test_ap_wpa2_tdls_wrong_tpk_m2_mic(dev, apdev):
"""Incorrect MIC in TDLS Setup Response"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
dev[0].request("SET tdls_testing 0x800")
addr0 = dev[0].p2p_interface_addr()
def test_ap_wpa2_tdls_wrong_tpk_m3_mic(dev, apdev):
"""Incorrect MIC in TDLS Setup Confirm"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
dev[1].request("SET tdls_testing 0x800")
addr0 = dev[0].p2p_interface_addr()
def test_ap_wpa_tdls(dev, apdev):
"""WPA-PSK AP and two stations using TDLS"""
skip_with_fips(dev[0])
- hapd = hostapd.add_ap(apdev[0]['ifname'],
+ hapd = hostapd.add_ap(apdev[0],
hostapd.wpa_params(ssid="test-wpa-psk",
passphrase="12345678"))
- wlantest_setup()
+ wlantest_setup(hapd)
connect_2sta_wpa_psk(dev, hapd)
- setup_tdls(dev[0], dev[1], apdev[0])
- teardown_tdls(dev[0], dev[1], apdev[0])
- setup_tdls(dev[1], dev[0], apdev[0])
+ setup_tdls(dev[0], dev[1], hapd)
+ teardown_tdls(dev[0], dev[1], hapd)
+ setup_tdls(dev[1], dev[0], hapd)
def test_ap_wpa_mixed_tdls(dev, apdev):
"""WPA+WPA2-PSK AP and two stations using TDLS"""
skip_with_fips(dev[0])
- hapd = hostapd.add_ap(apdev[0]['ifname'],
+ hapd = hostapd.add_ap(apdev[0],
hostapd.wpa_mixed_params(ssid="test-wpa-mixed-psk",
passphrase="12345678"))
- wlantest_setup()
+ wlantest_setup(hapd)
connect_2sta_wpa_psk_mixed(dev, hapd)
- setup_tdls(dev[0], dev[1], apdev[0])
- teardown_tdls(dev[0], dev[1], apdev[0])
- setup_tdls(dev[1], dev[0], apdev[0])
+ setup_tdls(dev[0], dev[1], hapd)
+ teardown_tdls(dev[0], dev[1], hapd)
+ setup_tdls(dev[1], dev[0], hapd)
def test_ap_wep_tdls(dev, apdev):
"""WEP AP and two stations using TDLS"""
- hapd = hostapd.add_ap(apdev[0]['ifname'],
+ hapd = hostapd.add_ap(apdev[0],
{ "ssid": "test-wep", "wep_key0": '"hello"' })
- wlantest_setup()
+ wlantest_setup(hapd)
connect_2sta_wep(dev, hapd)
- setup_tdls(dev[0], dev[1], apdev[0])
- teardown_tdls(dev[0], dev[1], apdev[0])
- setup_tdls(dev[1], dev[0], apdev[0])
+ setup_tdls(dev[0], dev[1], hapd)
+ teardown_tdls(dev[0], dev[1], hapd)
+ setup_tdls(dev[1], dev[0], hapd)
def test_ap_open_tdls(dev, apdev):
"""Open AP and two stations using TDLS"""
- hapd = hostapd.add_ap(apdev[0]['ifname'], { "ssid": "test-open" })
- wlantest_setup()
+ hapd = hostapd.add_ap(apdev[0], { "ssid": "test-open" })
+ wlantest_setup(hapd)
connect_2sta_open(dev, hapd)
- setup_tdls(dev[0], dev[1], apdev[0])
- teardown_tdls(dev[0], dev[1], apdev[0])
- setup_tdls(dev[1], dev[0], apdev[0])
- teardown_tdls(dev[1], dev[0], apdev[0], wildcard=True)
+ setup_tdls(dev[0], dev[1], hapd)
+ teardown_tdls(dev[0], dev[1], hapd)
+ setup_tdls(dev[1], dev[0], hapd)
+ teardown_tdls(dev[1], dev[0], hapd, wildcard=True)
def test_ap_wpa2_tdls_bssid_mismatch(dev, apdev):
"""TDLS failure due to BSSID mismatch"""
passphrase = "12345678"
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
params['bridge'] = 'ap-br0'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hostapd.add_ap(apdev[1]['ifname'], params)
- wlantest_setup()
+ hapd = hostapd.add_ap(apdev[0], params)
+ hostapd.add_ap(apdev[1], params)
+ wlantest_setup(hapd)
subprocess.call(['brctl', 'setfd', 'ap-br0', '0'])
subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'up'])
dev[0].connect(ssid, psk=passphrase, scan_freq="2412",
def test_ap_wpa2_tdls_responder_teardown(dev, apdev):
"""TDLS teardown from responder with WPA2-PSK AP"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
- setup_tdls(dev[0], dev[1], apdev[0])
- teardown_tdls(dev[0], dev[1], apdev[0], responder=True)
+ setup_tdls(dev[0], dev[1], hapd)
+ teardown_tdls(dev[0], dev[1], hapd, responder=True)
def test_ap_open_tdls_vht(dev, apdev):
"""Open AP and two stations using TDLS"""
"vht_capab": "",
"vht_oper_chwidth": "0",
"vht_oper_centr_freq_seg0_idx": "0" }
+ hapd = None
+ try:
+ hapd = hostapd.add_ap(apdev[0], params)
+ wlantest_setup(hapd)
+ connect_2sta_open(dev, hapd, scan_freq="5180")
+ setup_tdls(dev[0], dev[1], hapd)
+ teardown_tdls(dev[0], dev[1], hapd)
+ setup_tdls(dev[1], dev[0], hapd)
+ teardown_tdls(dev[1], dev[0], hapd, wildcard=True)
+ finally:
+ dev[0].request("DISCONNECT")
+ dev[1].request("DISCONNECT")
+ if hapd:
+ hapd.request("DISABLE")
+ subprocess.call(['iw', 'reg', 'set', '00'])
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+
+def test_ap_open_tdls_vht80(dev, apdev):
+ """Open AP and two stations using TDLS with VHT 80"""
+ params = { "ssid": "test-open",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "36",
+ "ht_capab": "[HT40+]",
+ "ieee80211n": "1",
+ "ieee80211ac": "1",
+ "vht_capab": "",
+ "vht_oper_chwidth": "1",
+ "vht_oper_centr_freq_seg0_idx": "42" }
+ try:
+ hapd = None
+ hapd = hostapd.add_ap(apdev[0], params)
+ wlantest_setup(hapd)
+ connect_2sta_open(dev, hapd, scan_freq="5180")
+ sig = dev[0].request("SIGNAL_POLL").splitlines()
+ if "WIDTH=80 MHz" not in sig:
+ raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
+ setup_tdls(dev[0], dev[1], hapd)
+ for i in range(10):
+ check_connectivity(dev[0], dev[1], hapd)
+ for i in range(2):
+ cmd = subprocess.Popen(['iw', dev[0].ifname, 'station', 'dump'],
+ stdout=subprocess.PIPE)
+ res = cmd.stdout.read()
+ cmd.stdout.close()
+ logger.info("Station dump on dev[%d]:\n%s" % (i, res))
+ except Exception, e:
+ if isinstance(e, Exception) and str(e) == "AP startup failed":
+ if not vht_supported():
+ raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
+ raise
+ finally:
+ dev[0].request("DISCONNECT")
+ dev[1].request("DISCONNECT")
+ if hapd:
+ hapd.request("DISABLE")
+ subprocess.call(['iw', 'reg', 'set', '00'])
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+
+def test_ap_open_tdls_vht80plus80(dev, apdev):
+ """Open AP and two stations using TDLS with VHT 80+80"""
+ params = { "ssid": "test-open",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "36",
+ "ht_capab": "[HT40+]",
+ "ieee80211n": "1",
+ "ieee80211ac": "1",
+ "vht_capab": "",
+ "vht_oper_chwidth": "3",
+ "vht_oper_centr_freq_seg0_idx": "42",
+ "vht_oper_centr_freq_seg1_idx": "155" }
try:
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- wlantest_setup()
+ hapd = None
+ hapd = hostapd.add_ap(apdev[0], params)
+ wlantest_setup(hapd)
connect_2sta_open(dev, hapd, scan_freq="5180")
- setup_tdls(dev[0], dev[1], apdev[0])
- teardown_tdls(dev[0], dev[1], apdev[0])
- setup_tdls(dev[1], dev[0], apdev[0])
- teardown_tdls(dev[1], dev[0], apdev[0], wildcard=True)
+ sig = dev[0].request("SIGNAL_POLL").splitlines()
+ if "FREQUENCY=5180" not in sig:
+ raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig))
+ if "WIDTH=80+80 MHz" not in sig:
+ raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
+ if "CENTER_FRQ1=5210" not in sig:
+ raise Exception("Unexpected SIGNAL_POLL value(3): " + str(sig))
+ if "CENTER_FRQ2=5775" not in sig:
+ raise Exception("Unexpected SIGNAL_POLL value(4): " + str(sig))
+ setup_tdls(dev[0], dev[1], hapd)
+ for i in range(10):
+ check_connectivity(dev[0], dev[1], hapd)
+ for i in range(2):
+ cmd = subprocess.Popen(['iw', dev[0].ifname, 'station', 'dump'],
+ stdout=subprocess.PIPE)
+ res = cmd.stdout.read()
+ cmd.stdout.close()
+ logger.info("Station dump on dev[%d]:\n%s" % (i, res))
+ except Exception, e:
+ if isinstance(e, Exception) and str(e) == "AP startup failed":
+ if not vht_supported():
+ raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
+ raise
+ finally:
+ dev[0].request("DISCONNECT")
+ dev[1].request("DISCONNECT")
+ if hapd:
+ hapd.request("DISABLE")
+ subprocess.call(['iw', 'reg', 'set', '00'])
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+
+def test_ap_open_tdls_vht160(dev, apdev):
+ """Open AP and two stations using TDLS with VHT 160"""
+ params = { "ssid": "test-open",
+ "country_code": "ZA",
+ "hw_mode": "a",
+ "channel": "104",
+ "ht_capab": "[HT40-]",
+ "ieee80211n": "1",
+ "ieee80211ac": "1",
+ "vht_oper_chwidth": "2",
+ "vht_oper_centr_freq_seg0_idx": "114" }
+ try:
+ hapd = None
+ hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
+ ev = hapd.wait_event(["AP-ENABLED"], timeout=2)
+ if not ev:
+ cmd = subprocess.Popen(["iw", "reg", "get"], stdout=subprocess.PIPE)
+ reg = cmd.stdout.readlines()
+ for r in reg:
+ if "5490" in r and "DFS" in r:
+ raise HwsimSkip("ZA regulatory rule did not have DFS requirement removed")
+ raise Exception("AP setup timed out")
+ wlantest_setup(hapd)
+ connect_2sta_open(dev, hapd, scan_freq="5520")
+ sig = dev[0].request("SIGNAL_POLL").splitlines()
+ if "WIDTH=160 MHz" not in sig:
+ raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig))
+ setup_tdls(dev[0], dev[1], hapd)
+ for i in range(10):
+ check_connectivity(dev[0], dev[1], hapd)
+ for i in range(2):
+ cmd = subprocess.Popen(['iw', dev[0].ifname, 'station', 'dump'],
+ stdout=subprocess.PIPE)
+ res = cmd.stdout.read()
+ cmd.stdout.close()
+ logger.info("Station dump on dev[%d]:\n%s" % (i, res))
+ except Exception, e:
+ if isinstance(e, Exception) and str(e) == "AP startup failed":
+ if not vht_supported():
+ raise HwsimSkip("80/160 MHz channel not supported in regulatory information")
+ raise
finally:
dev[0].request("DISCONNECT")
dev[1].request("DISCONNECT")
if flags & 0x800000000 == 0:
raise HwsimSkip("Driver does not support TDLS channel switching")
- hapd = hostapd.add_ap(apdev[0]['ifname'], { "ssid": "test-open" })
+ hapd = hostapd.add_ap(apdev[0], { "ssid": "test-open" })
+ wlantest_setup(hapd)
connect_2sta_open(dev, hapd)
- setup_tdls(dev[0], dev[1], apdev[0])
+ setup_tdls(dev[0], dev[1], hapd)
if "OK" not in dev[0].request("TDLS_CHAN_SWITCH " + dev[1].own_addr() + " 81 2462"):
raise Exception("Failed to enable TDLS channel switching")
if "OK" not in dev[0].request("TDLS_CANCEL_CHAN_SWITCH " + dev[1].own_addr()):
def test_ap_tdls_link_status(dev, apdev):
"""Check TDLS link status between two stations"""
- hapd = start_ap_wpa2_psk(apdev[0]['ifname'])
- wlantest_setup()
+ hapd = start_ap_wpa2_psk(apdev[0])
+ wlantest_setup(hapd)
connect_2sta_wpa2_psk(dev, hapd)
check_tdls_link(dev[0], dev[1], connected=False)
- setup_tdls(dev[0], dev[1], apdev[0])
+ setup_tdls(dev[0], dev[1], hapd)
check_tdls_link(dev[0], dev[1], connected=True)
- teardown_tdls(dev[0], dev[1], apdev[0])
+ teardown_tdls(dev[0], dev[1], hapd)
check_tdls_link(dev[0], dev[1], connected=False)
if "FAIL" not in dev[0].request("TDLS_LINK_STATUS foo"):
raise Exception("Unexpected TDLS_LINK_STATUS response for invalid argument")
projects / mech_eap.git / blobdiff