ChangeLog for wpa_supplicant
+2016-10-02 - v2.6
+ * fixed WNM Sleep Mode processing when PMF is not enabled
+ [http://w1.fi/security/2015-6/] (CVE-2015-5310)
+ * fixed EAP-pwd last fragment validation
+ [http://w1.fi/security/2015-7/] (CVE-2015-5315)
+ * fixed EAP-pwd unexpected Confirm message processing
+ [http://w1.fi/security/2015-8/] (CVE-2015-5316)
+ * fixed WPS configuration update vulnerability with malformed passphrase
+ [http://w1.fi/security/2016-1/] (CVE-2016-4476)
+ * fixed configuration update vulnerability with malformed parameters set
+ over the local control interface
+ [http://w1.fi/security/2016-1/] (CVE-2016-4477)
+ * fixed TK configuration to the driver in EAPOL-Key 3/4 retry case
+ * extended channel switch support for P2P GO
+ * started to throttle control interface event message bursts to avoid
+ issues with monitor sockets running out of buffer space
+ * mesh mode fixes/improvements
+ - generate proper AID for peer
+ - enable WMM by default
+ - add VHT support
+ - fix PMKID derivation
+ - improve robustness on various exchanges
+ - fix peer link counting in reconnect case
+ - improve mesh joining behavior
+ - allow DTIM period to be configured
+ - allow HT to be disabled (disable_ht=1)
+ - add MESH_PEER_ADD and MESH_PEER_REMOVE commands
+ - add support for PMKSA caching
+ - add minimal support for SAE group negotiation
+ - allow pairwise/group cipher to be configured in the network profile
+ - use ieee80211w profile parameter to enable/disable PMF and derive
+ a separate TX IGTK if PMF is enabled instead of using MGTK
+ incorrectly
+ - fix AEK and MTK derivation
+ - remove GTKdata and IGTKdata from Mesh Peering Confirm/Close
+ - note: these changes are not fully backwards compatible for secure
+ (RSN) mesh network
+ * fixed PMKID derivation with SAE
+ * added support for requesting and fetching arbitrary ANQP-elements
+ without internal support in wpa_supplicant for the specific element
+ (anqp[265]=<hexdump> in "BSS <BSSID>" command output)
+ * P2P
+ - filter control characters in group client device names to be
+ consistent with other P2P peer cases
+ - support VHT 80+80 MHz and 160 MHz
+ - indicate group completion in P2P Client role after data association
+ instead of already after the WPS provisioning step
+ - improve group-join operation to use SSID, if known, to filter BSS
+ entries
+ - added optional ssid=<hexdump> argument to P2P_CONNECT for join case
+ - added P2P_GROUP_MEMBER command to fetch client interface address
+ * P2PS
+ - fix follow-on PD Response behavior
+ - fix PD Response generation for unknown peer
+ - fix persistent group reporting
+ - add channel policy to PD Request
+ - add group SSID to the P2PS-PROV-DONE event
+ - allow "P2P_CONNECT <addr> p2ps" to be used without specifying the
+ default PIN
+ * BoringSSL
+ - support for OCSP stapling
+ - support building of h20-osu-client
+ * D-Bus
+ - add ExpectDisconnect()
+ - add global config parameters as properties
+ - add SaveConfig()
+ - add VendorElemAdd(), VendorElemGet(), VendorElemRem()
+ * fixed Suite B 192-bit AKM to use proper PMK length
+ (note: this makes old releases incompatible with the fixed behavior)
+ * improved PMF behavior for cases where the AP and STA has different
+ configuration by not trying to connect in some corner cases where the
+ connection cannot succeed
+ * added option to reopen debug log (e.g., to rotate the file) upon
+ receipt of SIGHUP signal
+ * EAP-pwd: added support for Brainpool Elliptic Curves
+ (with OpenSSL 1.0.2 and newer)
+ * fixed EAPOL reauthentication after FT protocol run
+ * fixed FTIE generation for 4-way handshake after FT protocol run
+ * extended INTERFACE_ADD command to allow certain type (sta/ap)
+ interface to be created
+ * fixed and improved various FST operations
+ * added 80+80 MHz and 160 MHz VHT support for IBSS/mesh
+ * fixed SIGNAL_POLL in IBSS and mesh cases
+ * added an option to abort an ongoing scan (used to speed up connection
+ and can also be done with the new ABORT_SCAN command)
+ * TLS client
+ - do not verify CA certificates when ca_cert is not specified
+ - support validating server certificate hash
+ - support SHA384 and SHA512 hashes
+ - add signature_algorithms extension into ClientHello
+ - support TLS v1.2 signature algorithm with SHA384 and SHA512
+ - support server certificate probing
+ - allow specific TLS versions to be disabled with phase2 parameter
+ - support extKeyUsage
+ - support PKCS #5 v2.0 PBES2
+ - support PKCS #5 with PKCS #12 style key decryption
+ - minimal support for PKCS #12
+ - support OCSP stapling (including ocsp_multi)
+ * OpenSSL
+ - support OpenSSL 1.1 API changes
+ - drop support for OpenSSL 0.9.8
+ - drop support for OpenSSL 1.0.0
+ * added support for multiple schedule scan plans (sched_scan_plans)
+ * added support for external server certificate chain validation
+ (tls_ext_cert_check=1 in the network profile phase1 parameter)
+ * made phase2 parser more strict about correct use of auth=<val> and
+ autheap=<val> values
+ * improved GAS offchannel operations with comeback request
+ * added SIGNAL_MONITOR command to request signal strength monitoring
+ events
+ * added command for retrieving HS 2.0 icons with in-memory storage
+ (REQ_HS20_ICON, GET_HS20_ICON, DEL_HS20_ICON commands and
+ RX-HS20-ICON event)
+ * enabled ACS support for AP mode operations with wpa_supplicant
+ * EAP-PEAP: fixed interoperability issue with Windows 2012r2 server
+ ("Invalid Compound_MAC in cryptobinding TLV")
+ * EAP-TTLS: fixed success after fragmented final Phase 2 message
+ * VHT: added interoperability workaround for 80+80 and 160 MHz channels
+ * WNM: workaround for broken AP operating class behavior
+ * added kqueue(2) support for eloop (CONFIG_ELOOP_KQUEUE)
+ * nl80211:
+ - add support for full station state operations
+ - do not add NL80211_ATTR_SMPS_MODE attribute if HT is disabled
+ - add NL80211_ATTR_PREV_BSSID with Connect command
+ - fix IEEE 802.1X/WEP EAP reauthentication and rekeying to use
+ unencrypted EAPOL frames
+ * added initial MBO support; number of extensions to WNM BSS Transition
+ Management
+ * added support for PBSS/PCP and P2P on 60 GHz
+ * Interworking: add credential realm to EAP-TLS identity
+ * fixed EAPOL-Key Request Secure bit to be 1 if PTK is set
+ * HS 2.0: add support for configuring frame filters
+ * added POLL_STA command to check connectivity in AP mode
+ * added initial functionality for location related operations
+ * started to ignore pmf=1/2 parameter for non-RSN networks
+ * added wps_disabled=1 network profile parameter to allow AP mode to
+ be started without enabling WPS
+ * wpa_cli: added action script support for AP-ENABLED and AP-DISABLED
+ events
+ * improved Public Action frame addressing
+ - add gas_address3 configuration parameter to control Address 3
+ behavior
+ * number of small fixes
+
2015-09-27 - v2.5
* fixed P2P validation of SSID element length before copying it
[http://w1.fi/security/2015-1/] (CVE-2015-1863)
projects / mech_eap.git / blobdiff