+++ /dev/null
-# Sample udhcpd configuration file (/etc/udhcpd.conf)
-
-# The start and end of the IP lease block
-
-start 192.168.42.20 #default: 192.168.0.20
-end 192.168.42.254 #default: 192.168.0.254
-
-
-# The interface that udhcpd will use
-
-interface wlan2 #default: eth0
-
-
-# The maximim number of leases (includes addressesd reserved
-# by OFFER's, DECLINE's, and ARP conficts
-
-#max_leases 254 #default: 254
-
-
-# If remaining is true (default), udhcpd will store the time
-# remaining for each lease in the udhcpd leases file. This is
-# for embedded systems that cannot keep time between reboots.
-# If you set remaining to no, the absolute time that the lease
-# expires at will be stored in the dhcpd.leases file.
-
-#remaining yes #default: yes
-
-
-# The time period at which udhcpd will write out a dhcpd.leases
-# file. If this is 0, udhcpd will never automatically write a
-# lease file. (specified in seconds)
-
-#auto_time 7200 #default: 7200 (2 hours)
-
-
-# The amount of time that an IP will be reserved (leased) for if a
-# DHCP decline message is received (seconds).
-
-#decline_time 3600 #default: 3600 (1 hour)
-
-
-# The amount of time that an IP will be reserved (leased) for if an
-# ARP conflct occurs. (seconds
-
-#conflict_time 3600 #default: 3600 (1 hour)
-
-
-# How long an offered address is reserved (leased) in seconds
-
-#offer_time 60 #default: 60 (1 minute)
-
-# If a lease to be given is below this value, the full lease time is
-# instead used (seconds).
-
-#min_lease 60 #defult: 60
-
-
-# The location of the leases file
-
-#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases
-
-# The location of the pid file
-pidfile /var/run/udhcpd-wlan2.pid #default: /var/run/udhcpd.pid
-
-# Every time udhcpd writes a leases file, the below script will be called.
-# Useful for writing the lease file to flash every few hours.
-
-#notify_file #default: (no script)
-
-#notify_file dumpleases # <--- useful for debugging
-
-# The following are bootp specific options, setable by udhcpd.
-
-#siaddr 192.168.0.22 #default: 0.0.0.0
-
-#sname zorak #default: (none)
-
-#boot_file /var/nfs_root #default: (none)
-
-# The remainer of options are DHCP options and can be specifed with the
-# keyword 'opt' or 'option'. If an option can take multiple items, such
-# as the dns option, they can be listed on the same line, or multiple
-# lines. The only option with a default is 'lease'.
-
-#Examles
-opt dns 192.168.2.1
-option subnet 255.255.255.0
-option domain atherosowl.com
-option lease 864000 # 10 days of seconds
-
-
-# Currently supported options, for more info, see options.c
-#opt subnet
-#opt timezone
-#opt router
-#opt timesvr
-#opt namesvr
-#opt dns
-#opt logsvr
-#opt cookiesvr
-#opt lprsvr
-#opt bootsize
-#opt domain
-#opt swapsvr
-#opt rootpath
-#opt ipttl
-#opt mtu
-#opt broadcast
-#opt wins
-#opt lease
-#opt ntpsrv
-#opt tftp
-#opt bootfile
-
-
-# Static leases map
-#static_lease 00:60:08:11:CE:4E 192.168.0.54
-#static_lease 00:60:08:11:CE:3E 192.168.0.44
-
-