/*
* Qualcomm Atheros OUI and vendor specific assignments
- * Copyright (c) 2014, Qualcomm Atheros, Inc.
+ * Copyright (c) 2014-2015, Qualcomm Atheros, Inc.
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*
* @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be
* used to configure PMK to the driver even when not connected. This can
- * be used to request offloading of key management operations.
+ * be used to request offloading of key management operations. Only used
+ * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
+ *
* @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: An extended version of
* NL80211_CMD_ROAM event with optional attributes including information
* from offloaded key management operation. Uses
- * enum qca_wlan_vendor_attr_roam_auth attributes.
+ * enum qca_wlan_vendor_attr_roam_auth attributes. Only used
+ * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
*
* @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to
* invoke the ACS function in device and pass selected channels to
* hostapd.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features
+ * supported by the driver. enum qca_wlan_vendor_features defines
+ * the possible features.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Event used by driver,
+ * which supports DFS offloading, to indicate a channel availability check
+ * start.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Event used by driver,
+ * which supports DFS offloading, to indicate a channel availability check
+ * completion.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Event used by driver,
+ * which supports DFS offloading, to indicate that the channel availability
+ * check aborted, no change to the channel status.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Event used by
+ * driver, which supports DFS offloading, to indicate that the
+ * Non-Occupancy Period for this channel is over, channel becomes usable.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver,
+ * which supports DFS offloading, to indicate a radar pattern has been
+ * detected. The channel is now unusable.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to
+ * start the P2P Listen offload function in device and pass the listen
+ * channel, period, interval, count, device types, and vendor specific
+ * information elements to the device driver and firmware.
+ * Uses the attributes defines in
+ * enum qca_wlan_vendor_attr_p2p_listen_offload.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP: Command/event used to
+ * indicate stop request/response of the P2P Listen offload function in
+ * device. As an event, it indicates either the feature stopped after it
+ * was already running or feature has actually failed to start. Uses the
+ * attributes defines in enum qca_wlan_vendor_attr_p2p_listen_offload.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH: After AP starts
+ * beaconing, this sub command provides the driver, the frequencies on the
+ * 5 GHz band to check for any radar activity. Driver selects one channel
+ * from this priority list provided through
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST and starts
+ * to check for radar activity on it. If no radar activity is detected
+ * during the channel availability check period, driver internally switches
+ * to the selected frequency of operation. If the frequency is zero, driver
+ * internally selects a channel. The status of this conditional switch is
+ * indicated through an event using the same sub command through
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS. Attributes are
+ * listed in qca_wlan_vendor_attr_sap_conditional_chan_switch.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND: Set GPIO pins. This uses the
+ * attributes defined in enum qca_wlan_gpio_attr.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY: Fetch hardware capabilities.
+ * This uses @QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY to indicate which
+ * capabilities are to be fetched and other
+ * enum qca_wlan_vendor_attr_get_hw_capability attributes to return the
+ * requested capabilities.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT: Link layer statistics extension.
+ * enum qca_wlan_vendor_attr_ll_stats_ext attributes are used with this
+ * command and event.
*/
enum qca_nl80211_vendor_subcmds {
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50,
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51,
QCA_NL80211_VENDOR_SUBCMD_APFIND = 52,
- /* 53 - reserved for QCA */
+ /* 53 - reserved - was used by QCA, but not in use anymore */
QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54,
+ QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60,
+ /* 61-73 - reserved for QCA */
+ /* Wi-Fi configuration subcommands */
+ QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION = 74,
+ QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION = 75,
+ /* 76-90 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100,
+ QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101,
+ QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102,
+ QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103,
+ QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104,
+ QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105,
+ QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN = 106,
+ QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE = 107,
+ QCA_NL80211_VENDOR_SUBCMD_OTA_TEST = 108,
+ QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109,
+ /* 110..114 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB = 115,
+ /* 116..117 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG = 118,
+ QCA_NL80211_VENDOR_SUBCMD_TSF = 119,
+ QCA_NL80211_VENDOR_SUBCMD_WISA = 120,
+ /* 121 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START = 122,
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP = 123,
+ QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH = 124,
+ QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND = 125,
+ QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY = 126,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT = 127,
};
* by enum qca_roaming_policy. */
QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5,
QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
+ QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7,
+ QCA_WLAN_VENDOR_ATTR_TEST = 8,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
+ /* Unsigned 32-bit value. */
+ QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11,
+ /* Unsigned 32-bit value from enum qca_set_band. */
+ QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12,
/* keep last */
QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS,
/* keep last */
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX =
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1
};
+enum qca_wlan_vendor_attr_p2p_listen_offload {
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID = 0,
+ /* A 32-bit unsigned value; the P2P listen frequency (MHz); must be one
+ * of the social channels.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL,
+ /* A 32-bit unsigned value; the P2P listen offload period (ms).
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD,
+ /* A 32-bit unsigned value; the P2P listen interval duration (ms).
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL,
+ /* A 32-bit unsigned value; number of interval times the firmware needs
+ * to run the offloaded P2P listen operation before it stops.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT,
+ /* An array of arbitrary binary data with one or more 8-byte values.
+ * The device types include both primary and secondary device types.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES,
+ /* An array of unsigned 8-bit characters; vendor information elements.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE,
+ /* A 32-bit unsigned value; a control flag to indicate whether listen
+ * results need to be flushed to wpa_supplicant.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG,
+ /* A 8-bit unsigned value; reason code for P2P listen offload stop
+ * event.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX =
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1
+};
+
enum qca_wlan_vendor_attr_acs_offload {
QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL,
QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE,
QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED,
QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED,
+ QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH,
+ QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST,
/* keep last */
QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ACS_MAX =
QCA_ACS_MODE_IEEE80211G,
QCA_ACS_MODE_IEEE80211A,
QCA_ACS_MODE_IEEE80211AD,
+ QCA_ACS_MODE_IEEE80211ANY,
+};
+
+/**
+ * enum qca_wlan_vendor_features - Vendor device/driver feature flags
+ *
+ * @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key
+ * management offload, a mechanism where the station's firmware
+ * does the exchange with the AP to establish the temporal keys
+ * after roaming, rather than having the user space wpa_supplicant do it.
+ * @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic
+ * band selection based on channel selection results.
+ * @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports
+ * simultaneous off-channel operations.
+ * @QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P
+ * Listen offload; a mechanism where the station's firmware takes care of
+ * responding to incoming Probe Request frames received from other P2P
+ * Devices whilst in Listen state, rather than having the user space
+ * wpa_supplicant do it. Information from received P2P requests are
+ * forwarded from firmware to host whenever the host processor wakes up.
+ * @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
+ */
+enum qca_wlan_vendor_features {
+ QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0,
+ QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1,
+ QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2,
+ QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD = 3,
+ NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
+};
+
+/**
+ * enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to
+ * the offloaded data.
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded
+ * data.
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload
+ * indication.
+ */
+enum qca_wlan_vendor_attr_data_offload_ind {
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX =
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1
+};
+
+enum qca_vendor_attr_get_preferred_freq_list {
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID,
+ /* A 32-unsigned value; the interface type/mode for which the preferred
+ * frequency list is requested (see enum qca_iface_type for possible
+ * values); used in GET_PREFERRED_FREQ_LIST command from user-space to
+ * kernel and in the kernel response back to user-space.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE,
+ /* An array of 32-unsigned values; values are frequency (MHz); sent
+ * from kernel space to user space.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX =
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1
+};
+
+enum qca_vendor_attr_probable_oper_channel {
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID,
+ /* 32-bit unsigned value; indicates the connection/iface type likely to
+ * come on this channel (see enum qca_iface_type).
+ */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE,
+ /* 32-bit unsigned value; the frequency (MHz) of the probable channel */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX =
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1
+};
+
+enum qca_iface_type {
+ QCA_IFACE_TYPE_STA,
+ QCA_IFACE_TYPE_AP,
+ QCA_IFACE_TYPE_P2P_CLIENT,
+ QCA_IFACE_TYPE_P2P_GO,
+ QCA_IFACE_TYPE_IBSS,
+ QCA_IFACE_TYPE_TDLS,
+};
+
+enum qca_set_band {
+ QCA_SETBAND_AUTO,
+ QCA_SETBAND_5G,
+ QCA_SETBAND_2G,
+};
+
+/**
+ * enum qca_access_policy - Access control policy
+ *
+ * Access control policy is applied on the configured IE
+ * (QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE).
+ * To be set with QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY.
+ *
+ * @QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED: Deny Wi-Fi connections which match
+ * the specific configuration (IE) set, i.e., allow all the
+ * connections which do not match the configuration.
+ * @QCA_ACCESS_POLICY_DENY_UNLESS_LISTED: Accept Wi-Fi connections which match
+ * the specific configuration (IE) set, i.e., deny all the
+ * connections which do not match the configuration.
+ */
+enum qca_access_policy {
+ QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED,
+ QCA_ACCESS_POLICY_DENY_UNLESS_LISTED,
+};
+
+/**
+ * enum qca_vendor_attr_get_tsf: Vendor attributes for TSF capture
+ * @QCA_WLAN_VENDOR_ATTR_TSF_CMD: enum qca_tsf_operation (u32)
+ * @QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE: Unsigned 64 bit TSF timer value
+ * @QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE: Unsigned 64 bit Synchronized
+ * SOC timer value at TSF capture
+ */
+enum qca_vendor_attr_tsf_cmd {
+ QCA_WLAN_VENDOR_ATTR_TSF_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TSF_CMD,
+ QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE,
+ QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE,
+ QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TSF_MAX =
+ QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_tsf_operation: TSF driver commands
+ * @QCA_TSF_CAPTURE: Initiate TSF Capture
+ * @QCA_TSF_GET: Get TSF capture value
+ * @QCA_TSF_SYNC_GET: Initiate TSF capture and return with captured value
+ */
+enum qca_tsf_cmd {
+ QCA_TSF_CAPTURE,
+ QCA_TSF_GET,
+ QCA_TSF_SYNC_GET,
+};
+
+/**
+ * enum qca_vendor_attr_wisa_cmd
+ * @QCA_WLAN_VENDOR_ATTR_WISA_MODE: WISA mode value (u32)
+ * WISA setup vendor commands
+ */
+enum qca_vendor_attr_wisa_cmd {
+ QCA_WLAN_VENDOR_ATTR_WISA_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_WISA_MODE,
+ QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WISA_MAX =
+ QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST - 1
+};
+
+/* IEEE 802.11 Vendor Specific elements */
+
+/**
+ * enum qca_vendor_element_id - QCA Vendor Specific element types
+ *
+ * These values are used to identify QCA Vendor Specific elements. The
+ * payload of the element starts with the three octet OUI (OUI_QCA) and
+ * is followed by a single octet type which is defined by this enum.
+ *
+ * @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list.
+ * This element can be used to specify preference order for supported
+ * channels. The channels in this list are in preference order (the first
+ * one has the highest preference) and are described as a pair of
+ * (global) Operating Class and Channel Number (each one octet) fields.
+ *
+ * This extends the standard P2P functionality by providing option to have
+ * more than one preferred operating channel. When this element is present,
+ * it replaces the preference indicated in the Operating Channel attribute.
+ * For supporting other implementations, the Operating Channel attribute is
+ * expected to be used with the highest preference channel. Similarly, all
+ * the channels included in this Preferred channel list element are
+ * expected to be included in the Channel List attribute.
+ *
+ * This vendor element may be included in GO Negotiation Request, P2P
+ * Invitation Request, and Provision Discovery Request frames.
+ *
+ * @QCA_VENDOR_ELEM_HE_CAPAB: HE Capabilities element.
+ * This element can be used for pre-standard publication testing of HE
+ * before P802.11ax draft assigns the element ID. The payload of this
+ * vendor specific element is defined by the latest P802.11ax draft.
+ * Please note that the draft is still work in progress and this element
+ * payload is subject to change.
+ *
+ * @QCA_VENDOR_ELEM_HE_OPER: HE Operation element.
+ * This element can be used for pre-standard publication testing of HE
+ * before P802.11ax draft assigns the element ID. The payload of this
+ * vendor specific element is defined by the latest P802.11ax draft.
+ * Please note that the draft is still work in progress and this element
+ * payload is subject to change.
+ */
+enum qca_vendor_element_id {
+ QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0,
+ QCA_VENDOR_ELEM_HE_CAPAB = 1,
+ QCA_VENDOR_ELEM_HE_OPER = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_scan - Specifies vendor scan attributes
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_IE: IEs that should be included as part of scan
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES: Nested unsigned 32-bit attributes
+ * with frequencies to be scanned (in MHz)
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS: Nested attribute with SSIDs to be scanned
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported
+ * rates to be included
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests
+ * at non CCK rate in 2GHz band
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the
+ * driver for the specific scan request
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan
+ * request decoded as in enum scan_status
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation
+ * scan flag is set
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with
+ * randomisation
+ */
+enum qca_wlan_vendor_attr_scan {
+ QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0,
+ QCA_WLAN_VENDOR_ATTR_SCAN_IE,
+ QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES,
+ QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS,
+ QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES,
+ QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE,
+ QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS,
+ QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE,
+ QCA_WLAN_VENDOR_ATTR_SCAN_STATUS,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAC,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK,
+ QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAX =
+ QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1
+};
+
+/**
+ * enum scan_status - Specifies the valid values the vendor scan attribute
+ * QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take
+ *
+ * @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with
+ * new scan results
+ * @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between
+ */
+enum scan_status {
+ VENDOR_SCAN_STATUS_NEW_RESULTS,
+ VENDOR_SCAN_STATUS_ABORTED,
+ VENDOR_SCAN_STATUS_MAX,
+};
+
+/**
+ * enum qca_vendor_attr_ota_test - Specifies the values for vendor
+ * command QCA_NL80211_VENDOR_SUBCMD_OTA_TEST
+ * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE: enable ota test
+ */
+enum qca_vendor_attr_ota_test {
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID,
+ /* 8-bit unsigned value to indicate if OTA test is enabled */
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX =
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_vendor_attr_txpower_scale - vendor sub commands index
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE: scaling value
+ */
+enum qca_vendor_attr_txpower_scale {
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID,
+ /* 8-bit unsigned value to indicate the scaling of tx power */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX =
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_vendor_attr_txpower_decr_db - Attributes for TX power decrease
+ *
+ * These attributes are used with QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB.
+ */
+enum qca_vendor_attr_txpower_decr_db {
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID,
+ /* 8-bit unsigned value to indicate the reduction of TX power in dB for
+ * a virtual interface. */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_MAX =
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST - 1
+};
+
+/* Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
+ * QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION subcommands.
+ */
+enum qca_wlan_vendor_attr_config {
+ QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID,
+ /* Unsigned 32-bit value to set the DTIM period.
+ * Whether the wifi chipset wakes at every dtim beacon or a multiple of
+ * the DTIM period. If DTIM is set to 3, the STA shall wake up every 3
+ * DTIM beacons.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_DYNAMIC_DTIM,
+ /* Unsigned 32-bit value to set the wifi_iface stats averaging factor
+ * used to calculate statistics like average the TSF offset or average
+ * number of frame leaked.
+ * For instance, upon Beacon frame reception:
+ * current_avg = ((beacon_TSF - TBTT) * factor + previous_avg * (0x10000 - factor) ) / 0x10000
+ * For instance, when evaluating leaky APs:
+ * current_avg = ((num frame received within guard time) * factor + previous_avg * (0x10000 - factor)) / 0x10000
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR,
+ /* Unsigned 32-bit value to configure guard time, i.e., when
+ * implementing IEEE power management based on frame control PM bit, how
+ * long the driver waits before shutting down the radio and after
+ * receiving an ACK frame for a Data frame with PM bit set.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME,
+ /* Unsigned 32-bit value to change the FTM capability dynamically */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT,
+ /* Unsigned 16-bit value to configure maximum TX rate dynamically */
+ QCA_WLAN_VENDOR_ATTR_CONF_TX_RATE,
+ /* Unsigned 32-bit value to configure the number of continuous
+ * Beacon Miss which shall be used by the firmware to penalize
+ * the RSSI.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS,
+ /* Unsigned 8-bit value to configure the channel avoidance indication
+ * behavior. Firmware to send only one indication and ignore duplicate
+ * indications when set to avoid multiple Apps wakeups.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND,
+ /* 8-bit unsigned value to configure the maximum TX MPDU for
+ * aggregation. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION,
+ /* 8-bit unsigned value to configure the maximum RX MPDU for
+ * aggregation. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION,
+ /* 8-bit unsigned value to configure the Non aggregrate/11g sw
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY,
+ /* 8-bit unsigned value to configure the aggregrate sw
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY,
+ /* 8-bit unsigned value to configure the MGMT frame
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY,
+ /* 8-bit unsigned value to configure the CTRL frame
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY,
+ /* 8-bit unsigned value to configure the propagation delay for
+ * 2G/5G band (0~63, units in us) */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY,
+ /* Unsigned 32-bit value to configure the number of unicast TX fail
+ * packet count. The peer is disconnected once this threshold is
+ * reached. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT,
+ /* Attribute used to set scan default IEs to the driver.
+ *
+ * These IEs can be used by scan operations that will be initiated by
+ * the driver/firmware.
+ *
+ * For further scan requests coming to the driver, these IEs should be
+ * merged with the IEs received along with scan request coming to the
+ * driver. If a particular IE is present in the scan default IEs but not
+ * present in the scan request, then that IE should be added to the IEs
+ * sent in the Probe Request frames for that scan request. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES,
+ /* Unsigned 32-bit attribute for generic commands */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND,
+ /* Unsigned 32-bit value attribute for generic commands */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE,
+ /* Unsigned 32-bit data attribute for generic command response */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA,
+ /* Unsigned 32-bit length attribute for
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH,
+ /* Unsigned 32-bit flags attribute for
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS,
+ /* Unsigned 32-bit, defining the access policy.
+ * See enum qca_access_policy. Used with
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY,
+ /* Sets the list of full set of IEs for which a specific access policy
+ * has to be applied. Used along with
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access.
+ * Zero length payload can be used to clear this access constraint. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST,
+ /* Unsigned 32-bit, specifies the interface index (netdev) for which the
+ * corresponding configurations are applied. If the interface index is
+ * not specified, the configurations are attributed to the respective
+ * wiphy. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX,
+ /* 8-bit unsigned value to trigger QPower: 1-Enable, 0-Disable */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_sap_config - Parameters for AP configuration
+ */
+enum qca_wlan_vendor_attr_sap_config {
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID = 0,
+ /* 1 - reserved for QCA */
+ /* List of frequencies on which AP is expected to operate.
+ * This is irrespective of ACS configuration. This list is a priority
+ * based one and is looked for before the AP is created to ensure the
+ * best concurrency sessions (avoid MCC and use DBS/SCC) co-exist in
+ * the system.
+ */
+ QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST = 2,
+
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_sap_conditional_chan_switch - Parameters for AP
+ * conditional channel switch
+ */
+enum qca_wlan_vendor_attr_sap_conditional_chan_switch {
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0,
+ /* Priority based frequency list (an array of u32 values in host byte
+ * order) */
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1,
+ /* Status of the conditional switch (u32).
+ * 0: Success, Non-zero: Failure
+ */
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS = 2,
+
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX =
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_gpio_attr - Parameters for GPIO configuration
+ */
+enum qca_wlan_gpio_attr {
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0,
+ /* Unsigned 32-bit attribute for GPIO command */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND,
+ /* Unsigned 32-bit attribute for GPIO PIN number to configure */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM,
+ /* Unsigned 32-bit attribute for GPIO value to configure */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE,
+ /* Unsigned 32-bit attribute for GPIO pull type */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE,
+ /* Unsigned 32-bit attribute for GPIO interrupt mode */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST,
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_hw_capability - Wi-Fi hardware capability
+ */
+enum qca_wlan_vendor_attr_get_hw_capability {
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_INVALID,
+ /* Antenna isolation
+ * An attribute used in the response.
+ * The content of this attribute is encoded in a byte array. Each byte
+ * value is an antenna isolation value. The array length is the number
+ * of antennas.
+ */
+ QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION,
+ /* Request HW capability
+ * An attribute used in the request.
+ * The content of this attribute is a u32 array for one or more of
+ * hardware capabilities (attribute IDs) that are being requested. Each
+ * u32 value has a value from this
+ * enum qca_wlan_vendor_attr_get_hw_capability
+ * identifying which capabilities are requested.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_MAX =
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ll_stats_ext - Attributes for MAC layer monitoring
+ * offload which is an extension for LL_STATS.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD: Monitoring period. Unit in ms.
+ * If MAC counters do not exceed the threshold, FW will report monitored
+ * link layer counters periodically as this setting. The first report is
+ * always triggered by this timer.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD: It is a percentage (1-99).
+ * For each MAC layer counter, FW holds two copies. One is the current value.
+ * The other is the last report. Once a current counter's increment is larger
+ * than the threshold, FW will indicate that counter to host even if the
+ * monitoring timer does not expire.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG: Peer STA power state change
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID: TID of MSDU
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU: Count of MSDU with the same
+ * failure code.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS: TX failure code
+ * 1: TX packet discarded
+ * 2: No ACK
+ * 3: Postpone
+ */
+enum qca_wlan_vendor_attr_ll_stats_ext {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_INVALID = 0,
+
+ /* Attributes for configurations */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD,
+
+ /* Attributes for events */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG,
+
+ /* TX failure event */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST - 1
};
#endif /* QCA_VENDOR_H */