/*
* Driver interface definition
- * Copyright (c) 2003-2014, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2003-2015, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
#define WPA_SUPPLICANT_DRIVER_VERSION 4
#include "common/defs.h"
+#include "common/ieee802_11_defs.h"
#include "utils/list.h"
#define HOSTAPD_CHAN_DISABLED 0x00000001
-#define HOSTAPD_CHAN_PASSIVE_SCAN 0x00000002
-#define HOSTAPD_CHAN_NO_IBSS 0x00000004
+#define HOSTAPD_CHAN_NO_IR 0x00000002
#define HOSTAPD_CHAN_RADAR 0x00000008
#define HOSTAPD_CHAN_HT40PLUS 0x00000010
#define HOSTAPD_CHAN_HT40MINUS 0x00000020
#define HOSTAPD_CHAN_VHT_50_30 0x00002000
#define HOSTAPD_CHAN_VHT_70_10 0x00004000
+#define HOSTAPD_CHAN_INDOOR_ONLY 0x00010000
+#define HOSTAPD_CHAN_GO_CONCURRENT 0x00020000
+
+#define HOSTAPD_CHAN_VHT_10_150 0x00100000
+#define HOSTAPD_CHAN_VHT_30_130 0x00200000
+#define HOSTAPD_CHAN_VHT_50_110 0x00400000
+#define HOSTAPD_CHAN_VHT_70_90 0x00800000
+#define HOSTAPD_CHAN_VHT_90_70 0x01000000
+#define HOSTAPD_CHAN_VHT_110_50 0x02000000
+#define HOSTAPD_CHAN_VHT_130_30 0x04000000
+#define HOSTAPD_CHAN_VHT_150_10 0x08000000
+
+/* Filter gratuitous ARP */
+#define WPA_DATA_FRAME_FILTER_FLAG_ARP BIT(0)
+/* Filter unsolicited Neighbor Advertisement */
+#define WPA_DATA_FRAME_FILTER_FLAG_NA BIT(1)
+/* Filter unicast IP packets encrypted using the GTK */
+#define WPA_DATA_FRAME_FILTER_FLAG_GTK BIT(2)
+
+/**
+ * enum reg_change_initiator - Regulatory change initiator
+ */
enum reg_change_initiator {
REGDOM_SET_BY_CORE,
REGDOM_SET_BY_USER,
REGDOM_BEACON_HINT,
};
+/**
+ * enum reg_type - Regulatory change types
+ */
enum reg_type {
REGDOM_TYPE_UNKNOWN,
REGDOM_TYPE_COUNTRY,
*/
u8 max_tx_power;
- /*
- * survey_list - Linked list of surveys
+ /**
+ * survey_list - Linked list of surveys (struct freq_survey)
*/
struct dl_list survey_list;
long double interference_factor;
#endif /* CONFIG_ACS */
- /* DFS CAC time in milliseconds */
+ /**
+ * dfs_cac_ms - DFS CAC time in milliseconds
+ */
unsigned int dfs_cac_ms;
};
#define IEEE80211_MODE_INFRA 0
#define IEEE80211_MODE_IBSS 1
#define IEEE80211_MODE_AP 2
+#define IEEE80211_MODE_MESH 5
#define IEEE80211_CAP_ESS 0x0001
#define IEEE80211_CAP_IBSS 0x0002
#define IEEE80211_CAP_PRIVACY 0x0010
+#define IEEE80211_CAP_RRM 0x1000
/* DMG (60 GHz) IEEE 802.11ad */
/* type - bits 0..1 */
#define WPA_SCAN_NOISE_INVALID BIT(1)
#define WPA_SCAN_LEVEL_INVALID BIT(2)
#define WPA_SCAN_LEVEL_DBM BIT(3)
-#define WPA_SCAN_AUTHENTICATED BIT(4)
#define WPA_SCAN_ASSOCIATED BIT(5)
/**
* @tsf: Timestamp
* @age: Age of the information in milliseconds (i.e., how many milliseconds
* ago the last Beacon or Probe Response frame was received)
+ * @est_throughput: Estimated throughput in kbps (this is calculated during
+ * scan result processing if left zero by the driver wrapper)
+ * @snr: Signal-to-noise ratio in dB (calculated during scan result processing)
* @ie_len: length of the following IE field in octets
* @beacon_ie_len: length of the following Beacon IE field in octets
*
* constructed of the IEs that are available. This field will also need to
* include SSID in IE format. All drivers are encouraged to be extended to
* report all IEs to make it easier to support future additions.
+ *
+ * This structure data is followed by ie_len octets of IEs from Probe Response
+ * frame (or if the driver does not indicate source of IEs, these may also be
+ * from Beacon frame). After the first set of IEs, another set of IEs may follow
+ * (with beacon_ie_len octets of data) if the driver provides both IE sets.
*/
struct wpa_scan_res {
unsigned int flags;
int level;
u64 tsf;
unsigned int age;
+ unsigned int est_throughput;
+ int snr;
size_t ie_len;
size_t beacon_ie_len;
- /*
- * Followed by ie_len octets of IEs from Probe Response frame (or if
- * the driver does not indicate source of IEs, these may also be from
- * Beacon frame). After the first set of IEs, another set of IEs may
- * follow (with beacon_ie_len octets of data) if the driver provides
- * both IE sets.
- */
+ /* Followed by ie_len + beacon_ie_len octets of IE data */
};
/**
#define WPAS_MAX_SCAN_SSIDS 16
/**
+ * struct wpa_driver_scan_ssid - SSIDs to scan for
+ * @ssid - specific SSID to scan for (ProbeReq)
+ * %NULL or zero-length SSID is used to indicate active scan
+ * with wildcard SSID.
+ * @ssid_len - Length of the SSID in octets
+ */
+struct wpa_driver_scan_ssid {
+ const u8 *ssid;
+ size_t ssid_len;
+};
+
+/**
* struct wpa_driver_scan_params - Scan parameters
* Data for struct wpa_driver_ops::scan2().
*/
/**
* ssids - SSIDs to scan for
*/
- struct wpa_driver_scan_ssid {
- /**
- * ssid - specific SSID to scan for (ProbeReq)
- * %NULL or zero-length SSID is used to indicate active scan
- * with wildcard SSID.
- */
- const u8 *ssid;
- /**
- * ssid_len: Length of the SSID in octets
- */
- size_t ssid_len;
- } ssids[WPAS_MAX_SCAN_SSIDS];
+ struct wpa_driver_scan_ssid ssids[WPAS_MAX_SCAN_SSIDS];
/**
* num_ssids - Number of entries in ssids array
* is not needed anymore.
*/
struct wpa_driver_scan_filter {
- u8 ssid[32];
+ u8 ssid[SSID_MAX_LEN];
size_t ssid_len;
} *filter_ssids;
*/
unsigned int low_priority:1;
+ /**
+ * mac_addr_rand - Requests driver to randomize MAC address
+ */
+ unsigned int mac_addr_rand:1;
+
+ /**
+ * mac_addr - MAC address used with randomization. The address cannot be
+ * a multicast one, i.e., bit 0 of byte 0 should not be set.
+ */
+ const u8 *mac_addr;
+
+ /**
+ * mac_addr_mask - MAC address mask used with randomization.
+ *
+ * Bits that are 0 in the mask should be randomized. Bits that are 1 in
+ * the mask should be taken as is from mac_addr. The mask should not
+ * allow the generation of a multicast address, i.e., bit 0 of byte 0
+ * must be set.
+ */
+ const u8 *mac_addr_mask;
+
+ /**
+ * sched_scan_plans - Scan plans for scheduled scan
+ *
+ * Each scan plan consists of the number of iterations to scan and the
+ * interval between scans. When a scan plan finishes (i.e., it was run
+ * for the specified number of iterations), the next scan plan is
+ * executed. The scan plans are executed in the order they appear in
+ * the array (lower index first). The last scan plan will run infinitely
+ * (until requested to stop), thus must not specify the number of
+ * iterations. All other scan plans must specify the number of
+ * iterations.
+ */
+ struct sched_scan_plan {
+ u32 interval; /* In seconds */
+ u32 iterations; /* Zero to run infinitely */
+ } *sched_scan_plans;
+
+ /**
+ * sched_scan_plans_num - Number of scan plans in sched_scan_plans array
+ */
+ unsigned int sched_scan_plans_num;
+
+ /**
+ * bssid - Specific BSSID to scan for
+ *
+ * This optional parameter can be used to replace the default wildcard
+ * BSSID with a specific BSSID to scan for if results are needed from
+ * only a single BSS.
+ */
+ const u8 *bssid;
+
/*
* NOTE: Whenever adding new parameters here, please make sure
* wpa_scan_clone_params() and wpa_scan_free_params() get updated with
*/
int p2p;
+ /**
+ * sae_data - SAE elements for Authentication frame
+ *
+ * This buffer starts with the Authentication transaction sequence
+ * number field. If SAE is not used, this pointer is %NULL.
+ */
const u8 *sae_data;
- size_t sae_data_len;
+ /**
+ * sae_data_len - Length of sae_data buffer in octets
+ */
+ size_t sae_data_len;
};
+/**
+ * enum wps_mode - WPS mode
+ */
enum wps_mode {
- WPS_MODE_NONE /* no WPS provisioning being used */,
- WPS_MODE_OPEN /* WPS provisioning with AP that is in open mode */,
- WPS_MODE_PRIVACY /* WPS provisioning with AP that is using protection
- */
+ /**
+ * WPS_MODE_NONE - No WPS provisioning being used
+ */
+ WPS_MODE_NONE,
+
+ /**
+ * WPS_MODE_OPEN - WPS provisioning with AP that is in open mode
+ */
+ WPS_MODE_OPEN,
+
+ /**
+ * WPS_MODE_PRIVACY - WPS provisioning with AP that is using protection
+ */
+ WPS_MODE_PRIVACY
};
+/**
+ * struct hostapd_freq_params - Channel parameters
+ */
struct hostapd_freq_params {
- int mode;
+ /**
+ * mode - Mode/band (HOSTAPD_MODE_IEEE80211A, ..)
+ */
+ enum hostapd_hw_mode mode;
+
+ /**
+ * freq - Primary channel center frequency in MHz
+ */
int freq;
+
+ /**
+ * channel - Channel number
+ */
int channel;
- /* for HT */
+
+ /**
+ * ht_enabled - Whether HT is enabled
+ */
int ht_enabled;
- int sec_channel_offset; /* 0 = HT40 disabled, -1 = HT40 enabled,
- * secondary channel below primary, 1 = HT40
- * enabled, secondary channel above primary */
- /* for VHT */
+ /**
+ * sec_channel_offset - Secondary channel offset for HT40
+ *
+ * 0 = HT40 disabled,
+ * -1 = HT40 enabled, secondary channel below primary,
+ * 1 = HT40 enabled, secondary channel above primary
+ */
+ int sec_channel_offset;
+
+ /**
+ * vht_enabled - Whether VHT is enabled
+ */
int vht_enabled;
- /* valid for both HT and VHT, center_freq2 is non-zero
- * only for bandwidth 80 and an 80+80 channel */
- int center_freq1, center_freq2;
+ /**
+ * center_freq1 - Segment 0 center frequency in MHz
+ *
+ * Valid for both HT and VHT.
+ */
+ int center_freq1;
+
+ /**
+ * center_freq2 - Segment 1 center frequency in MHz
+ *
+ * Non-zero only for bandwidth 80 and an 80+80 channel
+ */
+ int center_freq2;
+
+ /**
+ * bandwidth - Channel bandwidth in MHz (20, 40, 80, 160)
+ */
int bandwidth;
};
int fixed_bssid;
/**
+ * fixed_freq - Fix control channel in IBSS mode
+ * 0 = don't fix control channel (default)
+ * 1 = fix control channel; this prevents IBSS merging with another
+ * channel
+ */
+ int fixed_freq;
+
+ /**
* disable_ht - Disable HT (IEEE 802.11n) for this connection
*/
int disable_ht;
/**
- * HT Capabilities over-rides. Only bits set in the mask will be used,
- * and not all values are used by the kernel anyway. Currently, MCS,
- * MPDU and MSDU fields are used.
+ * htcaps - HT Capabilities over-rides
+ *
+ * Only bits set in the mask will be used, and not all values are used
+ * by the kernel anyway. Currently, MCS, MPDU and MSDU fields are used.
+ *
+ * Pointer to struct ieee80211_ht_capabilities.
+ */
+ const u8 *htcaps;
+
+ /**
+ * htcaps_mask - HT Capabilities over-rides mask
+ *
+ * Pointer to struct ieee80211_ht_capabilities.
*/
- const u8 *htcaps; /* struct ieee80211_ht_capabilities * */
- const u8 *htcaps_mask; /* struct ieee80211_ht_capabilities * */
+ const u8 *htcaps_mask;
#ifdef CONFIG_VHT_OVERRIDES
/**
const struct ieee80211_vht_capabilities *vhtcaps;
const struct ieee80211_vht_capabilities *vhtcaps_mask;
#endif /* CONFIG_VHT_OVERRIDES */
+
+ /**
+ * req_key_mgmt_offload - Request key management offload for connection
+ *
+ * Request key management offload for this connection if the device
+ * supports it.
+ */
+ int req_key_mgmt_offload;
+
+ /**
+ * Flag for indicating whether this association includes support for
+ * RRM (Radio Resource Measurements)
+ */
+ int rrm_used;
+
+ /**
+ * pbss - If set, connect to a PCP in a PBSS. Otherwise, connect to an
+ * AP as usual. Valid for DMG network only.
+ */
+ int pbss;
};
enum hide_ssid {
int ap_max_inactivity;
/**
+ * ctwindow - Client Traffic Window (in TUs)
+ */
+ u8 p2p_go_ctwindow;
+
+ /**
+ * smps_mode - SMPS mode
+ *
+ * SMPS mode to be used by the AP, specified as the relevant bits of
+ * ht_capab (i.e. HT_CAP_INFO_SMPS_*).
+ */
+ unsigned int smps_mode;
+
+ /**
* disable_dgaf - Whether group-addressed frames are disabled
*/
int disable_dgaf;
* freq - Channel parameters for dynamic bandwidth changes
*/
struct hostapd_freq_params *freq;
+
+ /**
+ * reenable - Whether this is to re-enable beaconing
+ */
+ int reenable;
+
+ /**
+ * pbss - Whether to start a PCP (in PBSS) instead of an AP in
+ * infrastructure BSS. Valid only for DMG network.
+ */
+ int pbss;
};
struct wpa_driver_mesh_bss_params {
-#define WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS 0x00000001
+#define WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS 0x00000001
+#define WPA_DRIVER_MESH_CONF_FLAG_PEER_LINK_TIMEOUT 0x00000002
+#define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS 0x00000004
/*
* TODO: Other mesh configuration parameters would go here.
* See NL80211_MESHCONF_* for all the mesh config parameters.
*/
unsigned int flags;
+ int auto_plinks;
+ int peer_link_timeout;
+ int max_peer_links;
};
struct wpa_driver_mesh_join_params {
const int *basic_rates;
const u8 *ies;
int ie_len;
- int freq;
+ struct hostapd_freq_params freq;
+ int beacon_int;
+ int dtim_period;
struct wpa_driver_mesh_bss_params conf;
#define WPA_DRIVER_MESH_FLAG_USER_MPM 0x00000001
#define WPA_DRIVER_MESH_FLAG_DRIVER_MPM 0x00000002
#define WPA_DRIVER_CAPA_KEY_MGMT_FT 0x00000020
#define WPA_DRIVER_CAPA_KEY_MGMT_FT_PSK 0x00000040
#define WPA_DRIVER_CAPA_KEY_MGMT_WAPI_PSK 0x00000080
+#define WPA_DRIVER_CAPA_KEY_MGMT_SUITE_B 0x00000100
+#define WPA_DRIVER_CAPA_KEY_MGMT_SUITE_B_192 0x00000200
+ /** Bitfield of supported key management suites */
unsigned int key_mgmt;
#define WPA_DRIVER_CAPA_ENC_WEP40 0x00000001
#define WPA_DRIVER_CAPA_ENC_BIP_GMAC_256 0x00000400
#define WPA_DRIVER_CAPA_ENC_BIP_CMAC_256 0x00000800
#define WPA_DRIVER_CAPA_ENC_GTK_NOT_USED 0x00001000
+ /** Bitfield of supported cipher suites */
unsigned int enc;
#define WPA_DRIVER_AUTH_OPEN 0x00000001
#define WPA_DRIVER_AUTH_SHARED 0x00000002
#define WPA_DRIVER_AUTH_LEAP 0x00000004
+ /** Bitfield of supported IEEE 802.11 authentication algorithms */
unsigned int auth;
-/* Driver generated WPA/RSN IE */
+/** Driver generated WPA/RSN IE */
#define WPA_DRIVER_FLAGS_DRIVER_IE 0x00000001
-/* Driver needs static WEP key setup after association command */
+/** Driver needs static WEP key setup after association command */
#define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC 0x00000002
-/* Driver takes care of all DFS operations */
+/** Driver takes care of all DFS operations */
#define WPA_DRIVER_FLAGS_DFS_OFFLOAD 0x00000004
-/* Driver takes care of RSN 4-way handshake internally; PMK is configured with
+/** Driver takes care of RSN 4-way handshake internally; PMK is configured with
* struct wpa_driver_ops::set_key using alg = WPA_ALG_PMK */
#define WPA_DRIVER_FLAGS_4WAY_HANDSHAKE 0x00000008
+/** Driver is for a wired Ethernet interface */
#define WPA_DRIVER_FLAGS_WIRED 0x00000010
-/* Driver provides separate commands for authentication and association (SME in
+/** Driver provides separate commands for authentication and association (SME in
* wpa_supplicant). */
#define WPA_DRIVER_FLAGS_SME 0x00000020
-/* Driver supports AP mode */
+/** Driver supports AP mode */
#define WPA_DRIVER_FLAGS_AP 0x00000040
-/* Driver needs static WEP key setup after association has been completed */
+/** Driver needs static WEP key setup after association has been completed */
#define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE 0x00000080
-/* Driver supports dynamic HT 20/40 MHz channel changes during BSS lifetime */
+/** Driver supports dynamic HT 20/40 MHz channel changes during BSS lifetime */
#define WPA_DRIVER_FLAGS_HT_2040_COEX 0x00000100
-/* Driver supports concurrent P2P operations */
+/** Driver supports concurrent P2P operations */
#define WPA_DRIVER_FLAGS_P2P_CONCURRENT 0x00000200
-/*
+/**
* Driver uses the initial interface as a dedicated management interface, i.e.,
* it cannot be used for P2P group operations or non-P2P purposes.
*/
#define WPA_DRIVER_FLAGS_P2P_DEDICATED_INTERFACE 0x00000400
-/* This interface is P2P capable (P2P GO or P2P Client) */
+/** This interface is P2P capable (P2P GO or P2P Client) */
#define WPA_DRIVER_FLAGS_P2P_CAPABLE 0x00000800
-/* Driver supports station and key removal when stopping an AP */
+/** Driver supports station and key removal when stopping an AP */
#define WPA_DRIVER_FLAGS_AP_TEARDOWN_SUPPORT 0x00001000
-/*
+/**
* Driver uses the initial interface for P2P management interface and non-P2P
* purposes (e.g., connect to infra AP), but this interface cannot be used for
* P2P group operations.
*/
#define WPA_DRIVER_FLAGS_P2P_MGMT_AND_NON_P2P 0x00002000
-/*
+/**
* Driver is known to use sane error codes, i.e., when it indicates that
* something (e.g., association) fails, there was indeed a failure and the
* operation does not end up getting completed successfully later.
*/
#define WPA_DRIVER_FLAGS_SANE_ERROR_CODES 0x00004000
-/* Driver supports off-channel TX */
+/** Driver supports off-channel TX */
#define WPA_DRIVER_FLAGS_OFFCHANNEL_TX 0x00008000
-/* Driver indicates TX status events for EAPOL Data frames */
+/** Driver indicates TX status events for EAPOL Data frames */
#define WPA_DRIVER_FLAGS_EAPOL_TX_STATUS 0x00010000
-/* Driver indicates TX status events for Deauth/Disassoc frames */
+/** Driver indicates TX status events for Deauth/Disassoc frames */
#define WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS 0x00020000
-/* Driver supports roaming (BSS selection) in firmware */
+/** Driver supports roaming (BSS selection) in firmware */
#define WPA_DRIVER_FLAGS_BSS_SELECTION 0x00040000
-/* Driver supports operating as a TDLS peer */
+/** Driver supports operating as a TDLS peer */
#define WPA_DRIVER_FLAGS_TDLS_SUPPORT 0x00080000
-/* Driver requires external TDLS setup/teardown/discovery */
+/** Driver requires external TDLS setup/teardown/discovery */
#define WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP 0x00100000
-/* Driver indicates support for Probe Response offloading in AP mode */
+/** Driver indicates support for Probe Response offloading in AP mode */
#define WPA_DRIVER_FLAGS_PROBE_RESP_OFFLOAD 0x00200000
-/* Driver supports U-APSD in AP mode */
+/** Driver supports U-APSD in AP mode */
#define WPA_DRIVER_FLAGS_AP_UAPSD 0x00400000
-/* Driver supports inactivity timer in AP mode */
+/** Driver supports inactivity timer in AP mode */
#define WPA_DRIVER_FLAGS_INACTIVITY_TIMER 0x00800000
-/* Driver expects user space implementation of MLME in AP mode */
+/** Driver expects user space implementation of MLME in AP mode */
#define WPA_DRIVER_FLAGS_AP_MLME 0x01000000
-/* Driver supports SAE with user space SME */
+/** Driver supports SAE with user space SME */
#define WPA_DRIVER_FLAGS_SAE 0x02000000
-/* Driver makes use of OBSS scan mechanism in wpa_supplicant */
+/** Driver makes use of OBSS scan mechanism in wpa_supplicant */
#define WPA_DRIVER_FLAGS_OBSS_SCAN 0x04000000
-/* Driver supports IBSS (Ad-hoc) mode */
+/** Driver supports IBSS (Ad-hoc) mode */
#define WPA_DRIVER_FLAGS_IBSS 0x08000000
-/* Driver supports radar detection */
+/** Driver supports radar detection */
#define WPA_DRIVER_FLAGS_RADAR 0x10000000
-/* Driver supports a dedicated interface for P2P Device */
+/** Driver supports a dedicated interface for P2P Device */
#define WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE 0x20000000
-/* Driver supports QoS Mapping */
+/** Driver supports QoS Mapping */
#define WPA_DRIVER_FLAGS_QOS_MAPPING 0x40000000
-/* Driver supports CSA in AP mode */
+/** Driver supports CSA in AP mode */
#define WPA_DRIVER_FLAGS_AP_CSA 0x80000000
-/* Driver supports mesh */
+/** Driver supports mesh */
#define WPA_DRIVER_FLAGS_MESH 0x0000000100000000ULL
+/** Driver support ACS offload */
+#define WPA_DRIVER_FLAGS_ACS_OFFLOAD 0x0000000200000000ULL
+/** Driver supports key management offload */
+#define WPA_DRIVER_FLAGS_KEY_MGMT_OFFLOAD 0x0000000400000000ULL
+/** Driver supports TDLS channel switching */
+#define WPA_DRIVER_FLAGS_TDLS_CHANNEL_SWITCH 0x0000000800000000ULL
+/** Driver supports IBSS with HT datarates */
+#define WPA_DRIVER_FLAGS_HT_IBSS 0x0000001000000000ULL
+/** Driver supports IBSS with VHT datarates */
+#define WPA_DRIVER_FLAGS_VHT_IBSS 0x0000002000000000ULL
+/** Driver supports automatic band selection */
+#define WPA_DRIVER_FLAGS_SUPPORT_HW_MODE_ANY 0x0000004000000000ULL
+/** Driver supports simultaneous off-channel operations */
+#define WPA_DRIVER_FLAGS_OFFCHANNEL_SIMULTANEOUS 0x0000008000000000ULL
+/** Driver supports full AP client state */
+#define WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE 0x0000010000000000ULL
+/** Driver supports P2P Listen offload */
+#define WPA_DRIVER_FLAGS_P2P_LISTEN_OFFLOAD 0x0000020000000000ULL
u64 flags;
+#define FULL_AP_CLIENT_STATE_SUPP(drv_flags) \
+ (drv_flags & WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE)
+
+#define WPA_DRIVER_SMPS_MODE_STATIC 0x00000001
+#define WPA_DRIVER_SMPS_MODE_DYNAMIC 0x00000002
+ unsigned int smps_modes;
+
+ unsigned int wmm_ac_supported:1;
+
+ unsigned int mac_addr_rand_scan_supported:1;
+ unsigned int mac_addr_rand_sched_scan_supported:1;
+
+ /** Maximum number of supported active probe SSIDs */
int max_scan_ssids;
+
+ /** Maximum number of supported active probe SSIDs for sched_scan */
int max_sched_scan_ssids;
+
+ /** Maximum number of supported scan plans for scheduled scan */
+ unsigned int max_sched_scan_plans;
+
+ /** Maximum interval in a scan plan. In seconds */
+ u32 max_sched_scan_plan_interval;
+
+ /** Maximum number of iterations in a single scan plan */
+ u32 max_sched_scan_plan_iterations;
+
+ /** Whether sched_scan (offloaded scanning) is supported */
int sched_scan_supported;
+
+ /** Maximum number of supported match sets for sched_scan */
int max_match_sets;
/**
* probe_resp_offloads - Bitmap of supported protocols by the driver
* for Probe Response offloading.
*/
-/* Driver Probe Response offloading support for WPS ver. 1 */
+/** Driver Probe Response offloading support for WPS ver. 1 */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS 0x00000001
-/* Driver Probe Response offloading support for WPS ver. 2 */
+/** Driver Probe Response offloading support for WPS ver. 2 */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS2 0x00000002
-/* Driver Probe Response offloading support for P2P */
+/** Driver Probe Response offloading support for P2P */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_P2P 0x00000004
-/* Driver Probe Response offloading support for IEEE 802.11u (Interworking) */
+/** Driver Probe Response offloading support for IEEE 802.11u (Interworking) */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_INTERWORKING 0x00000008
unsigned int probe_resp_offloads;
unsigned int extended_capa_len;
struct wowlan_triggers wowlan_triggers;
+
+/** Driver adds the DS Params Set IE in Probe Request frames */
+#define WPA_DRIVER_FLAGS_DS_PARAM_SET_IE_IN_PROBES 0x00000001
+/** Driver adds the WFA TPC IE in Probe Request frames */
+#define WPA_DRIVER_FLAGS_WFA_TPC_IE_IN_PROBES 0x00000002
+/** Driver handles quiet period requests */
+#define WPA_DRIVER_FLAGS_QUIET 0x00000004
+/**
+ * Driver is capable of inserting the current TX power value into the body of
+ * transmitted frames.
+ * Background: Some Action frames include a TPC Report IE. This IE contains a
+ * TX power field, which has to be updated by lower layers. One such Action
+ * frame is Link Measurement Report (part of RRM). Another is TPC Report (part
+ * of spectrum management). Note that this insertion takes place at a fixed
+ * offset, namely the 6th byte in the Action frame body.
+ */
+#define WPA_DRIVER_FLAGS_TX_POWER_INSERTION 0x00000008
+/**
+ * Driver supports RRM. With this support, the driver will accept to use RRM in
+ * (Re)Association Request frames, without supporting quiet period.
+ */
+#define WPA_DRIVER_FLAGS_SUPPORT_RRM 0x00000010
+
+ u32 rrm_flags;
+
+ /* Driver concurrency capabilities */
+ unsigned int conc_capab;
+ /* Maximum number of concurrent channels on 2.4 GHz */
+ unsigned int max_conc_chan_2_4;
+ /* Maximum number of concurrent channels on 5 GHz */
+ unsigned int max_conc_chan_5_0;
+
+ /* Maximum number of supported CSA counters */
+ u16 max_csa_counters;
};
struct hostapd_data;
struct hostap_sta_driver_data {
- unsigned long rx_packets, tx_packets, rx_bytes, tx_bytes;
+ unsigned long rx_packets, tx_packets;
+ unsigned long long rx_bytes, tx_bytes;
+ int bytes_64bit; /* whether 64-bit byte counters are supported */
unsigned long current_tx_rate;
unsigned long inactive_msec;
unsigned long flags;
u8 vht_opmode;
u32 flags; /* bitmask of WPA_STA_* flags */
u32 flags_mask; /* unset bits in flags */
+#ifdef CONFIG_MESH
+ enum mesh_plink_state plink_state;
+ u16 peer_aid;
+#endif /* CONFIG_MESH */
int set; /* Set STA parameters instead of add */
u8 qosinfo;
const u8 *ext_capab;
size_t supp_channels_len;
const u8 *supp_oper_classes;
size_t supp_oper_classes_len;
+ int support_p2p_ps;
};
struct mac_address {
* WPA_IF_P2P_DEVICE - P2P Device interface is used to indentify the
* abstracted P2P Device function in the driver
*/
- WPA_IF_P2P_DEVICE
+ WPA_IF_P2P_DEVICE,
+
+ /*
+ * WPA_IF_MESH - Mesh interface
+ */
+ WPA_IF_MESH,
+
+ /*
+ * WPA_IF_TDLS - TDLS offchannel interface (used for pref freq only)
+ */
+ WPA_IF_TDLS,
+
+ /*
+ * WPA_IF_IBSS - IBSS interface (used for pref freq only)
+ */
+ WPA_IF_IBSS,
};
struct wpa_init_params {
void *global_priv;
const u8 *bssid;
const char *ifname;
- const u8 *ssid;
- size_t ssid_len;
- const char *test_socket;
+ const char *driver_params;
int use_pae_group_addr;
char **bridge;
size_t num_bridge;
#define WPA_STA_SHORT_PREAMBLE BIT(2)
#define WPA_STA_MFP BIT(3)
#define WPA_STA_TDLS_PEER BIT(4)
+#define WPA_STA_AUTHENTICATED BIT(5)
+#define WPA_STA_ASSOCIATED BIT(6)
enum tdls_oper {
TDLS_DISCOVERY_REQ,
int above_threshold;
int current_signal;
int avg_signal;
+ int avg_beacon_signal;
int current_noise;
int current_txrate;
enum chan_width chanwidth;
struct beacon_data beacon_csa;
struct beacon_data beacon_after;
- u16 counter_offset_beacon;
- u16 counter_offset_presp;
+ u16 counter_offset_beacon[2];
+ u16 counter_offset_presp[2];
};
/* TDLS peer capabilities for send_tdls_mgmt() */
TDLS_PEER_WMM = BIT(2),
};
+/* valid info in the wmm_params struct */
+enum wmm_params_valid_info {
+ WMM_PARAMS_UAPSD_QUEUES_INFO = BIT(0),
+};
+
+/**
+ * struct wmm_params - WMM parameterss configured for this association
+ * @info_bitmap: Bitmap of valid wmm_params info; indicates what fields
+ * of the struct contain valid information.
+ * @uapsd_queues: Bitmap of ACs configured for uapsd (valid only if
+ * %WMM_PARAMS_UAPSD_QUEUES_INFO is set)
+ */
+struct wmm_params {
+ u8 info_bitmap;
+ u8 uapsd_queues;
+};
+
#ifdef CONFIG_MACSEC
struct macsec_init_params {
Boolean always_include_sci;
};
#endif /* CONFIG_MACSEC */
+enum drv_br_port_attr {
+ DRV_BR_PORT_ATTR_PROXYARP,
+ DRV_BR_PORT_ATTR_HAIRPIN_MODE,
+};
+
+enum drv_br_net_param {
+ DRV_BR_NET_PARAM_GARP_ACCEPT,
+ DRV_BR_MULTICAST_SNOOPING,
+};
+
+struct drv_acs_params {
+ /* Selected mode (HOSTAPD_MODE_*) */
+ enum hostapd_hw_mode hw_mode;
+
+ /* Indicates whether HT is enabled */
+ int ht_enabled;
+
+ /* Indicates whether HT40 is enabled */
+ int ht40_enabled;
+
+ /* Indicates whether VHT is enabled */
+ int vht_enabled;
+
+ /* Configured ACS channel width */
+ u16 ch_width;
+
+ /* ACS channel list info */
+ unsigned int ch_list_len;
+ const u8 *ch_list;
+ const int *freq_list;
+};
+
/**
* struct wpa_driver_ops - Driver interface API definition
void (*poll)(void *priv);
/**
+ * get_ifindex - Get interface index
+ * @priv: private driver interface data
+ *
+ * Returns: Interface index
+ */
+ unsigned int (*get_ifindex)(void *priv);
+
+ /**
* get_ifname - Get interface name
* @priv: private driver interface data
*
const u8 * (*get_mac_addr)(void *priv);
/**
- * send_eapol - Optional function for sending EAPOL packets
- * @priv: private driver interface data
- * @dest: Destination MAC address
- * @proto: Ethertype
- * @data: EAPOL packet starting with IEEE 802.1X header
- * @data_len: Size of the EAPOL packet
- *
- * Returns: 0 on success, -1 on failure
- *
- * This optional function can be used to override l2_packet operations
- * with driver specific functionality. If this function pointer is set,
- * l2_packet module is not used at all and the driver interface code is
- * responsible for receiving and sending all EAPOL packets. The
- * received EAPOL packets are sent to core code with EVENT_EAPOL_RX
- * event. The driver interface is required to implement get_mac_addr()
- * handler if send_eapol() is used.
- */
- int (*send_eapol)(void *priv, const u8 *dest, u16 proto,
- const u8 *data, size_t data_len);
-
- /**
* set_operstate - Sets device operating state to DORMANT or UP
* @priv: private driver interface data
* @state: 0 = dormant, 1 = up
* @data: IEEE 802.11 management frame with IEEE 802.11 header
* @data_len: Size of the management frame
* @noack: Do not wait for this frame to be acked (disable retries)
+ * @freq: Frequency (in MHz) to send the frame on, or 0 to let the
+ * driver decide
+ * @csa_offs: Array of CSA offsets or %NULL
+ * @csa_offs_len: Number of elements in csa_offs
* Returns: 0 on success, -1 on failure
*/
int (*send_mlme)(void *priv, const u8 *data, size_t data_len,
- int noack);
+ int noack, unsigned int freq, const u16 *csa_offs,
+ size_t csa_offs_len);
/**
* update_ft_ies - Update FT (IEEE 802.11r) IEs
size_t ies_len);
/**
- * send_ft_action - Send FT Action frame (IEEE 802.11r)
- * @priv: Private driver interface data
- * @action: Action field value
- * @target_ap: Target AP address
- * @ies: FT IEs (MDIE, FTIE, ...) (FT Request action frame body)
- * @ies_len: Length of FT IEs in bytes
- * Returns: 0 on success, -1 on failure
- *
- * The supplicant uses this callback to request the driver to transmit
- * an FT Action frame (action category 6) for over-the-DS fast BSS
- * transition.
- */
- int (*send_ft_action)(void *priv, u8 action, const u8 *target_ap,
- const u8 *ies, size_t ies_len);
-
- /**
* get_scan_results2 - Fetch the latest scan results
* @priv: private driver interface data
*
/**
* global_init - Global driver initialization
+ * @ctx: wpa_global pointer
* Returns: Pointer to private data (global), %NULL on failure
*
* This optional function is called to initialize the driver wrapper
* use init2() function instead of init() to get the pointer to global
* data available to per-interface initializer.
*/
- void * (*global_init)(void);
+ void * (*global_init)(void *ctx);
/**
* global_deinit - Global driver deinitialization
* @params: Station parameters
* Returns: 0 on success, -1 on failure
*
- * This function is used to add a station entry to the driver once the
- * station has completed association. This is only used if the driver
+ * This function is used to add or set (params->set 1) a station
+ * entry in the driver. Adding STA entries is used only if the driver
* does not take care of association processing.
*
- * With TDLS, this function is also used to add or set (params->set 1)
- * TDLS peer entries.
+ * With drivers that don't support full AP client state, this function
+ * is used to add a station entry to the driver once the station has
+ * completed association.
+ *
+ * With TDLS, this function is used to add or set (params->set 1)
+ * TDLS peer entries (even with drivers that do not support full AP
+ * client state).
*/
int (*sta_add)(void *priv, struct hostapd_sta_add_params *params);
* Returns: 0 on success, -1 on failure
*/
int (*sta_set_flags)(void *priv, const u8 *addr,
- int total_flags, int flags_or, int flags_and);
+ unsigned int total_flags, unsigned int flags_or,
+ unsigned int flags_and);
/**
* set_tx_queue_params - Set TX queue parameters
* change interface address)
* @bridge: Bridge interface to use or %NULL if no bridge configured
* @use_existing: Whether to allow existing interface to be used
+ * @setup_ap: Whether to setup AP for %WPA_IF_AP_BSS interfaces
* Returns: 0 on success, -1 on failure
*/
int (*if_add)(void *priv, enum wpa_driver_if_type type,
const char *ifname, const u8 *addr, void *bss_ctx,
void **drv_priv, char *force_ifname, u8 *if_addr,
- const char *bridge, int use_existing);
+ const char *bridge, int use_existing, int setup_ap);
/**
* if_remove - Remove a virtual interface
int encrypt);
/**
- * shared_freq - Get operating frequency of shared interface(s)
- * @priv: Private driver interface data
- * Returns: Operating frequency in MHz, 0 if no shared operation in
- * use, or -1 on failure
- *
- * This command can be used to request the current operating frequency
- * of any virtual interface that shares the same radio to provide
- * information for channel selection for other virtual interfaces.
- */
- int (*shared_freq)(void *priv);
-
- /**
* get_noa - Get current Notice of Absence attribute payload
* @priv: Private driver interface data
* @buf: Buffer for returning NoA
u8 qos_map_set_len);
/**
+ * br_add_ip_neigh - Add a neigh to the bridge ip neigh table
+ * @priv: Private driver interface data
+ * @version: IP version of the IP address, 4 or 6
+ * @ipaddr: IP address for the neigh entry
+ * @prefixlen: IP address prefix length
+ * @addr: Corresponding MAC address
+ * Returns: 0 on success, negative (<0) on failure
+ */
+ int (*br_add_ip_neigh)(void *priv, u8 version, const u8 *ipaddr,
+ int prefixlen, const u8 *addr);
+
+ /**
+ * br_delete_ip_neigh - Remove a neigh from the bridge ip neigh table
+ * @priv: Private driver interface data
+ * @version: IP version of the IP address, 4 or 6
+ * @ipaddr: IP address for the neigh entry
+ * Returns: 0 on success, negative (<0) on failure
+ */
+ int (*br_delete_ip_neigh)(void *priv, u8 version, const u8 *ipaddr);
+
+ /**
+ * br_port_set_attr - Set a bridge port attribute
+ * @attr: Bridge port attribute to set
+ * @val: Value to be set
+ * Returns: 0 on success, negative (<0) on failure
+ */
+ int (*br_port_set_attr)(void *priv, enum drv_br_port_attr attr,
+ unsigned int val);
+
+ /**
+ * br_port_set_attr - Set a bridge network parameter
+ * @param: Bridge parameter to set
+ * @val: Value to be set
+ * Returns: 0 on success, negative (<0) on failure
+ */
+ int (*br_set_net_param)(void *priv, enum drv_br_net_param param,
+ unsigned int val);
+
+ /**
* set_wowlan - Set wake-on-wireless triggers
* @priv: Private driver interface data
* @triggers: wowlan triggers
* set_rekey_info - Set rekey information
* @priv: Private driver interface data
* @kek: Current KEK
+ * @kek_len: KEK length in octets
* @kck: Current KCK
+ * @kck_len: KCK length in octets
* @replay_ctr: Current EAPOL-Key Replay Counter
*
* This optional function can be used to provide information for the
* driver/firmware to process EAPOL-Key frames in Group Key Handshake
* while the host (including wpa_supplicant) is sleeping.
*/
- void (*set_rekey_info)(void *priv, const u8 *kek, const u8 *kck,
+ void (*set_rekey_info)(void *priv, const u8 *kek, size_t kek_len,
+ const u8 *kck, size_t kck_len,
const u8 *replay_ctr);
/**
* sched_scan - Request the driver to initiate scheduled scan
* @priv: Private driver interface data
* @params: Scan parameters
- * @interval: Interval between scan cycles in milliseconds
* Returns: 0 on success, -1 on failure
*
* This operation should be used for scheduled scan offload to
* and if not provided or if it returns -1, we fall back to
* normal host-scheduled scans.
*/
- int (*sched_scan)(void *priv, struct wpa_driver_scan_params *params,
- u32 interval);
+ int (*sched_scan)(void *priv, struct wpa_driver_scan_params *params);
/**
* stop_sched_scan - Request the driver to stop a scheduled scan
int (*switch_channel)(void *priv, struct csa_settings *settings);
/**
+ * add_tx_ts - Add traffic stream
+ * @priv: Private driver interface data
+ * @tsid: Traffic stream ID
+ * @addr: Receiver address
+ * @user_prio: User priority of the traffic stream
+ * @admitted_time: Admitted time for this TS in units of
+ * 32 microsecond periods (per second).
+ * Returns: 0 on success, -1 on failure
+ */
+ int (*add_tx_ts)(void *priv, u8 tsid, const u8 *addr, u8 user_prio,
+ u16 admitted_time);
+
+ /**
+ * del_tx_ts - Delete traffic stream
+ * @priv: Private driver interface data
+ * @tsid: Traffic stream ID
+ * @addr: Receiver address
+ * Returns: 0 on success, -1 on failure
+ */
+ int (*del_tx_ts)(void *priv, u8 tsid, const u8 *addr);
+
+ /**
+ * Enable channel-switching with TDLS peer
+ * @priv: Private driver interface data
+ * @addr: MAC address of the TDLS peer
+ * @oper_class: Operating class of the switch channel
+ * @params: Channel specification
+ * Returns: 0 on success, -1 on failure
+ *
+ * The function indicates to driver that it can start switching to a
+ * different channel with a specified TDLS peer. The switching is
+ * assumed on until canceled with tdls_disable_channel_switch().
+ */
+ int (*tdls_enable_channel_switch)(
+ void *priv, const u8 *addr, u8 oper_class,
+ const struct hostapd_freq_params *params);
+
+ /**
+ * Disable channel switching with TDLS peer
+ * @priv: Private driver interface data
+ * @addr: MAC address of the TDLS peer
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function indicates to the driver that it should stop switching
+ * with a given TDLS peer.
+ */
+ int (*tdls_disable_channel_switch)(void *priv, const u8 *addr);
+
+ /**
* start_dfs_cac - Listen for radar interference on the channel
* @priv: Private driver interface data
* @freq: Channel parameters
* Returns 0 on success, -1 on failure
*/
int (*leave_mesh)(void *priv);
+
+ /**
+ * do_acs - Automatically select channel
+ * @priv: Private driver interface data
+ * @params: Parameters for ACS
+ * Returns 0 on success, -1 on failure
+ *
+ * This command can be used to offload ACS to the driver if the driver
+ * indicates support for such offloading (WPA_DRIVER_FLAGS_ACS_OFFLOAD).
+ */
+ int (*do_acs)(void *priv, struct drv_acs_params *params);
+
+ /**
+ * set_band - Notify driver of band selection
+ * @priv: Private driver interface data
+ * @band: The selected band(s)
+ * Returns 0 on success, -1 on failure
+ */
+ int (*set_band)(void *priv, enum set_band band);
+
+ /**
+ * get_pref_freq_list - Get preferred frequency list for an interface
+ * @priv: Private driver interface data
+ * @if_type: Interface type
+ * @num: Number of channels
+ * @freq_list: Preferred channel frequency list encoded in MHz values
+ * Returns 0 on success, -1 on failure
+ *
+ * This command can be used to query the preferred frequency list from
+ * the driver specific to a particular interface type.
+ */
+ int (*get_pref_freq_list)(void *priv, enum wpa_driver_if_type if_type,
+ unsigned int *num, unsigned int *freq_list);
+
+ /**
+ * set_prob_oper_freq - Indicate probable P2P operating channel
+ * @priv: Private driver interface data
+ * @freq: Channel frequency in MHz
+ * Returns 0 on success, -1 on failure
+ *
+ * This command can be used to inform the driver of the operating
+ * frequency that an ongoing P2P group formation is likely to come up
+ * on. Local device is assuming P2P Client role.
+ */
+ int (*set_prob_oper_freq)(void *priv, unsigned int freq);
+
+ /**
+ * abort_scan - Request the driver to abort an ongoing scan
+ * @priv: Private driver interface data
+ * Returns 0 on success, -1 on failure
+ */
+ int (*abort_scan)(void *priv);
+
+ /**
+ * configure_data_frame_filters - Request to configure frame filters
+ * @priv: Private driver interface data
+ * @filter_flags: The type of frames to filter (bitfield of
+ * WPA_DATA_FRAME_FILTER_FLAG_*)
+ * Returns: 0 on success or -1 on failure
+ */
+ int (*configure_data_frame_filters)(void *priv, u32 filter_flags);
+
+ /**
+ * get_ext_capab - Get extended capabilities for the specified interface
+ * @priv: Private driver interface data
+ * @type: Interface type for which to get extended capabilities
+ * @ext_capab: Extended capabilities fetched
+ * @ext_capab_mask: Extended capabilities mask
+ * @ext_capab_len: Length of the extended capabilities
+ * Returns: 0 on success or -1 on failure
+ */
+ int (*get_ext_capab)(void *priv, enum wpa_driver_if_type type,
+ const u8 **ext_capab, const u8 **ext_capab_mask,
+ unsigned int *ext_capab_len);
+
+ /**
+ * p2p_lo_start - Start offloading P2P listen to device
+ * @priv: Private driver interface data
+ * @freq: Listening frequency (MHz) for P2P listen
+ * @period: Length of the listen operation in milliseconds
+ * @interval: Interval for running the listen operation in milliseconds
+ * @count: Number of times to run the listen operation
+ * @device_types: Device primary and secondary types
+ * @dev_types_len: Number of bytes for device_types
+ * @ies: P2P IE and WSC IE for Probe Response frames
+ * @ies_len: Length of ies in bytes
+ * Returns: 0 on success or -1 on failure
+ */
+ int (*p2p_lo_start)(void *priv, unsigned int freq,
+ unsigned int period, unsigned int interval,
+ unsigned int count,
+ const u8 *device_types, size_t dev_types_len,
+ const u8 *ies, size_t ies_len);
+
+ /**
+ * p2p_lo_stop - Stop P2P listen offload
+ * @priv: Private driver interface data
+ * Returns: 0 on success or -1 on failure
+ */
+ int (*p2p_lo_stop)(void *priv);
+
+ /**
+ * set_default_scan_ies - Set default scan IEs
+ * @priv: Private driver interface data
+ * @ies: Scan default IEs buffer
+ * @ies_len: Length of IEs in bytes
+ * Returns: 0 on success or -1 on failure
+ *
+ * The driver can use these by default when there are no scan IEs coming
+ * in the subsequent scan requests. Also in case of one or more of IEs
+ * given in set_default_scan_ies() are missing in the subsequent scan
+ * request, the driver should merge the missing scan IEs in the scan
+ * request from the IEs set by set_default_scan_ies() in the Probe
+ * Request frames sent.
+ */
+ int (*set_default_scan_ies)(void *priv, const u8 *ies, size_t ies_len);
+
};
EVENT_ASSOC_TIMED_OUT,
/**
- * EVENT_FT_RRB_RX - FT (IEEE 802.11r) RRB frame received
- */
- EVENT_FT_RRB_RX,
-
- /**
* EVENT_WPS_BUTTON_PUSHED - Report hardware push button press for WPS
*/
EVENT_WPS_BUTTON_PUSHED,
EVENT_CANCEL_REMAIN_ON_CHANNEL,
/**
- * EVENT_MLME_RX - Report reception of frame for MLME (test use only)
- *
- * This event is used only by driver_test.c and userspace MLME.
- */
- EVENT_MLME_RX,
-
- /**
* EVENT_RX_PROBE_REQ - Indicate received Probe Request frame
*
* This event is used to indicate when a Probe Request frame has been
* EVENT_EAPOL_RX - Report received EAPOL frame
*
* When in AP mode with hostapd, this event is required to be used to
- * deliver the receive EAPOL frames from the driver. With
- * %wpa_supplicant, this event is used only if the send_eapol() handler
- * is used to override the use of l2_packet for EAPOL frame TX.
+ * deliver the receive EAPOL frames from the driver.
*/
EVENT_EAPOL_RX,
EVENT_CONNECT_FAILED_REASON,
/**
- * EVENT_RADAR_DETECTED - Notify of radar detection
+ * EVENT_DFS_RADAR_DETECTED - Notify of radar detection
*
* A radar has been detected on the supplied frequency, hostapd should
* react accordingly (e.g., change channel).
EVENT_DFS_RADAR_DETECTED,
/**
- * EVENT_CAC_FINISHED - Notify that channel availability check has been completed
+ * EVENT_DFS_CAC_FINISHED - Notify that channel availability check has been completed
*
* After a successful CAC, the channel can be marked clear and used.
*/
EVENT_DFS_CAC_FINISHED,
/**
- * EVENT_CAC_ABORTED - Notify that channel availability check has been aborted
+ * EVENT_DFS_CAC_ABORTED - Notify that channel availability check has been aborted
*
* The CAC was not successful, and the channel remains in the previous
* state. This may happen due to a radar beeing detected or other
EVENT_DFS_CAC_ABORTED,
/**
- * EVENT_DFS_CAC_NOP_FINISHED - Notify that non-occupancy period is over
+ * EVENT_DFS_NOP_FINISHED - Notify that non-occupancy period is over
*
* The channel which was previously unavailable is now available again.
*/
/**
* EVENT_NEW_PEER_CANDIDATE - new (unknown) mesh peer notification
*/
- EVENT_NEW_PEER_CANDIDATE
+ EVENT_NEW_PEER_CANDIDATE,
+
+ /**
+ * EVENT_ACS_CHANNEL_SELECTED - Received selected channels by ACS
+ *
+ * Indicates a pair of primary and secondary channels chosen by ACS
+ * in device.
+ */
+ EVENT_ACS_CHANNEL_SELECTED,
+ /**
+ * EVENT_DFS_CAC_STARTED - Notify that channel availability check has
+ * been started.
+ *
+ * This event indicates that channel availability check has been started
+ * on a DFS frequency by a driver that supports DFS Offload.
+ */
+ EVENT_DFS_CAC_STARTED,
+
+ /**
+ * EVENT_P2P_LO_STOP - Notify that P2P listen offload is stopped
+ */
+ EVENT_P2P_LO_STOP,
};
unsigned int freq;
/**
+ * wmm_params - WMM parameters used in this association.
+ */
+ struct wmm_params wmm_params;
+
+ /**
* addr - Station address (for AP mode)
*/
const u8 *addr;
+
+ /**
+ * The following is the key management offload information
+ * @authorized
+ * @key_replay_ctr
+ * @key_replay_ctr_len
+ * @ptk_kck
+ * @ptk_kek_len
+ * @ptk_kek
+ * @ptk_kek_len
+ */
+
+ /**
+ * authorized - Status of key management offload,
+ * 1 = successful
+ */
+ int authorized;
+
+ /**
+ * key_replay_ctr - Key replay counter value last used
+ * in a valid EAPOL-Key frame
+ */
+ const u8 *key_replay_ctr;
+
+ /**
+ * key_replay_ctr_len - The length of key_replay_ctr
+ */
+ size_t key_replay_ctr_len;
+
+ /**
+ * ptk_kck - The derived PTK KCK
+ */
+ const u8 *ptk_kck;
+
+ /**
+ * ptk_kek_len - The length of ptk_kck
+ */
+ size_t ptk_kck_len;
+
+ /**
+ * ptk_kek - The derived PTK KEK
+ */
+ const u8 *ptk_kek;
+
+ /**
+ * ptk_kek_len - The length of ptk_kek
+ */
+ size_t ptk_kek_len;
+
+ /**
+ * subnet_status - The subnet status:
+ * 0 = unknown, 1 = unchanged, 2 = changed
+ */
+ u8 subnet_status;
} assoc_info;
/**
* struct interface_status - Data for EVENT_INTERFACE_STATUS
*/
struct interface_status {
+ unsigned int ifindex;
char ifname[100];
enum {
EVENT_INTERFACE_ADDED, EVENT_INTERFACE_REMOVED
u8 peer[ETH_ALEN];
enum {
TDLS_REQUEST_SETUP,
- TDLS_REQUEST_TEARDOWN
+ TDLS_REQUEST_TEARDOWN,
+ TDLS_REQUEST_DISCOVER,
} oper;
u16 reason_code; /* for teardown */
} tdls;
* status_code - Status Code from (Re)association Response
*/
u16 status_code;
+
+ /**
+ * timed_out - Whether failure is due to timeout (etc.) rather
+ * than explicit rejection response from the AP.
+ */
+ int timed_out;
} assoc_reject;
struct timeout_event {
} timeout_event;
/**
- * struct ft_rrb_rx - Data for EVENT_FT_RRB_RX events
- */
- struct ft_rrb_rx {
- const u8 *src;
- const u8 *data;
- size_t data_len;
- } ft_rrb_rx;
-
- /**
* struct tx_status - Data for EVENT_TX_STATUS events
*/
struct tx_status {
* @ssids: Scanned SSIDs (%NULL or zero-length SSID indicates wildcard
* SSID)
* @num_ssids: Number of entries in ssids array
+ * @external_scan: Whether the scan info is for an external scan
+ * @nl_scan_event: 1 if the source of this scan event is a normal scan,
+ * 0 if the source of the scan event is a vendor scan
*/
struct scan_info {
int aborted;
size_t num_freqs;
struct wpa_driver_scan_ssid ssids[WPAS_MAX_SCAN_SSIDS];
size_t num_ssids;
+ int external_scan;
+ int nl_scan_event;
} scan_info;
/**
- * struct mlme_rx - Data for EVENT_MLME_RX events
- */
- struct mlme_rx {
- const u8 *buf;
- size_t len;
- int freq;
- int channel;
- int ssi;
- } mlme_rx;
-
- /**
* struct rx_probe_req - Data for EVENT_RX_PROBE_REQ events
*/
struct rx_probe_req {
* survey_results - Survey result data for EVENT_SURVEY
* @freq_filter: Requested frequency survey filter, 0 if request
* was for all survey data
- * @survey_list: Linked list of survey data
+ * @survey_list: Linked list of survey data (struct freq_survey)
*/
struct survey_results {
unsigned int freq_filter;
size_t ie_len;
} mesh_peer;
+ /**
+ * struct acs_selected_channels - Data for EVENT_ACS_CHANNEL_SELECTED
+ * @pri_channel: Selected primary channel
+ * @sec_channel: Selected secondary channel
+ * @vht_seg0_center_ch: VHT mode Segment0 center channel
+ * @vht_seg1_center_ch: VHT mode Segment1 center channel
+ * @ch_width: Selected Channel width by driver. Driver may choose to
+ * change hostapd configured ACS channel width due driver internal
+ * channel restrictions.
+ * hw_mode: Selected band (used with hw_mode=any)
+ */
+ struct acs_selected_channels {
+ u8 pri_channel;
+ u8 sec_channel;
+ u8 vht_seg0_center_ch;
+ u8 vht_seg1_center_ch;
+ u16 ch_width;
+ enum hostapd_hw_mode hw_mode;
+ } acs_selected_channels;
+
+ /**
+ * struct p2p_lo_stop - Reason code for P2P Listen offload stop event
+ * @reason_code: Reason for stopping offload
+ * P2P_LO_STOPPED_REASON_COMPLETE: Listen offload finished as
+ * scheduled.
+ * P2P_LO_STOPPED_REASON_RECV_STOP_CMD: Host requested offload to
+ * be stopped.
+ * P2P_LO_STOPPED_REASON_INVALID_PARAM: Invalid listen offload
+ * parameters.
+ * P2P_LO_STOPPED_REASON_NOT_SUPPORTED: Listen offload not
+ * supported by device.
+ */
+ struct p2p_lo_stop {
+ enum {
+ P2P_LO_STOPPED_REASON_COMPLETE = 0,
+ P2P_LO_STOPPED_REASON_RECV_STOP_CMD,
+ P2P_LO_STOPPED_REASON_INVALID_PARAM,
+ P2P_LO_STOPPED_REASON_NOT_SUPPORTED,
+ } reason_code;
+ } p2p_lo_stop;
};
/**
void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
union wpa_event_data *data);
+/**
+ * wpa_supplicant_event_global - Report a driver event for wpa_supplicant
+ * @ctx: Context pointer (wpa_s); this is the ctx variable registered
+ * with struct wpa_driver_ops::init()
+ * @event: event type (defined above)
+ * @data: possible extra data for the event
+ *
+ * Same as wpa_supplicant_event(), but we search for the interface in
+ * wpa_global.
+ */
+void wpa_supplicant_event_global(void *ctx, enum wpa_event_type event,
+ union wpa_event_data *data);
/*
* The following inline functions are provided for convenience to simplify
int ht_supported(const struct hostapd_hw_modes *mode);
int vht_supported(const struct hostapd_hw_modes *mode);
+struct wowlan_triggers *
+wpa_get_wowlan_triggers(const char *wowlan_triggers,
+ const struct wpa_driver_capa *capa);
+/* Convert driver flag to string */
+const char * driver_flag_to_string(u64 flag);
+
/* NULL terminated array of linked in driver wrappers */
-extern struct wpa_driver_ops *wpa_drivers[];
+extern const struct wpa_driver_ops *const wpa_drivers[];
+
+
+/* Available drivers */
+
+#ifdef CONFIG_DRIVER_WEXT
+extern const struct wpa_driver_ops wpa_driver_wext_ops; /* driver_wext.c */
+#endif /* CONFIG_DRIVER_WEXT */
+#ifdef CONFIG_DRIVER_NL80211
+/* driver_nl80211.c */
+extern const struct wpa_driver_ops wpa_driver_nl80211_ops;
+#endif /* CONFIG_DRIVER_NL80211 */
+#ifdef CONFIG_DRIVER_HOSTAP
+extern const struct wpa_driver_ops wpa_driver_hostap_ops; /* driver_hostap.c */
+#endif /* CONFIG_DRIVER_HOSTAP */
+#ifdef CONFIG_DRIVER_BSD
+extern const struct wpa_driver_ops wpa_driver_bsd_ops; /* driver_bsd.c */
+#endif /* CONFIG_DRIVER_BSD */
+#ifdef CONFIG_DRIVER_OPENBSD
+/* driver_openbsd.c */
+extern const struct wpa_driver_ops wpa_driver_openbsd_ops;
+#endif /* CONFIG_DRIVER_OPENBSD */
+#ifdef CONFIG_DRIVER_NDIS
+extern struct wpa_driver_ops wpa_driver_ndis_ops; /* driver_ndis.c */
+#endif /* CONFIG_DRIVER_NDIS */
+#ifdef CONFIG_DRIVER_WIRED
+extern const struct wpa_driver_ops wpa_driver_wired_ops; /* driver_wired.c */
+#endif /* CONFIG_DRIVER_WIRED */
+#ifdef CONFIG_DRIVER_MACSEC_QCA
+/* driver_macsec_qca.c */
+extern const struct wpa_driver_ops wpa_driver_macsec_qca_ops;
+#endif /* CONFIG_DRIVER_MACSEC_QCA */
+#ifdef CONFIG_DRIVER_ROBOSWITCH
+/* driver_roboswitch.c */
+extern const struct wpa_driver_ops wpa_driver_roboswitch_ops;
+#endif /* CONFIG_DRIVER_ROBOSWITCH */
+#ifdef CONFIG_DRIVER_ATHEROS
+/* driver_atheros.c */
+extern const struct wpa_driver_ops wpa_driver_atheros_ops;
+#endif /* CONFIG_DRIVER_ATHEROS */
+#ifdef CONFIG_DRIVER_NONE
+extern const struct wpa_driver_ops wpa_driver_none_ops; /* driver_none.c */
+#endif /* CONFIG_DRIVER_NONE */
#endif /* DRIVER_H */
projects / mech_eap.git / blobdiff