static int i802_set_iface_flags(struct i802_bss *bss, int up);
static int nl80211_set_param(void *priv, const char *param);
+#ifdef CONFIG_MESH
+static int nl80211_put_mesh_config(struct nl_msg *msg,
+ struct wpa_driver_mesh_bss_params *params);
+#endif /* CONFIG_MESH */
/* Converts nl80211_chan_width to a common format */
if (drv->hostapd || bss->static_ap)
nlmode = NL80211_IFTYPE_AP;
- else if (bss->if_dynamic)
+ else if (bss->if_dynamic ||
+ nl80211_get_ifmode(bss) == NL80211_IFTYPE_MESH_POINT)
nlmode = nl80211_get_ifmode(bss);
else
nlmode = NL80211_IFTYPE_STATION;
}
+#ifdef CONFIG_MESH
+static int nl80211_set_mesh_config(void *priv,
+ struct wpa_driver_mesh_bss_params *params)
+{
+ struct i802_bss *bss = priv;
+ struct wpa_driver_nl80211_data *drv = bss->drv;
+ struct nl_msg *msg;
+ int ret;
+
+ msg = nl80211_drv_msg(drv, 0, NL80211_CMD_SET_MESH_CONFIG);
+ if (!msg)
+ return -1;
+
+ ret = nl80211_put_mesh_config(msg, params);
+ if (ret < 0) {
+ nlmsg_free(msg);
+ return ret;
+ }
+
+ ret = send_and_recv_msgs(drv, msg, NULL, NULL);
+ if (ret) {
+ wpa_printf(MSG_ERROR,
+ "nl80211: Mesh config set failed: %d (%s)",
+ ret, strerror(-ret));
+ return ret;
+ }
+ return 0;
+}
+#endif /* CONFIG_MESH */
+
+
static int wpa_driver_nl80211_set_ap(void *priv,
struct wpa_driver_ap_params *params)
{
int smps_mode;
u32 suites[10], suite;
u32 ver;
+#ifdef CONFIG_MESH
+ struct wpa_driver_mesh_bss_params mesh_params;
+#endif /* CONFIG_MESH */
beacon_set = params->reenable ? 0 : bss->beacon_set;
goto fail;
if (params->key_mgmt_suites & WPA_KEY_MGMT_IEEE8021X_NO_WPA &&
- params->pairwise_ciphers & (WPA_CIPHER_WEP104 | WPA_CIPHER_WEP40) &&
- nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT))
+ (!params->pairwise_ciphers ||
+ params->pairwise_ciphers & (WPA_CIPHER_WEP104 | WPA_CIPHER_WEP40)) &&
+ (nla_put_u16(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE, ETH_P_PAE) ||
+ nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT)))
goto fail;
wpa_printf(MSG_DEBUG, "nl80211: pairwise_ciphers=0x%x",
bss->bandwidth = params->freq->bandwidth;
}
}
+
+#ifdef CONFIG_MESH
+ if (is_mesh_interface(drv->nlmode) && params->ht_opmode != -1) {
+ os_memset(&mesh_params, 0, sizeof(mesh_params));
+ mesh_params.flags |= WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE;
+ mesh_params.ht_opmode = params->ht_opmode;
+ ret = nl80211_set_mesh_config(priv, &mesh_params);
+ if (ret < 0)
+ return ret;
+ }
+#endif /* CONFIG_MESH */
+
return ret;
fail:
nlmsg_free(msg);
if (nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT))
return -1;
+ if (params->key_mgmt_suite == WPA_KEY_MGMT_IEEE8021X_NO_WPA &&
+ (params->pairwise_suite == WPA_CIPHER_NONE ||
+ params->pairwise_suite == WPA_CIPHER_WEP104 ||
+ params->pairwise_suite == WPA_CIPHER_WEP40) &&
+ (nla_put_u16(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE, ETH_P_PAE) ||
+ nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT)))
+ return -1;
+
if (params->mgmt_frame_protection == MGMT_FRAME_PROTECTION_REQUIRED &&
nla_put_u32(msg, NL80211_ATTR_USE_MFP, NL80211_MFP_REQUIRED))
return -1;
drv->force_connect_cmd = 1;
}
+ if (os_strstr(param, "force_bss_selection=1")) {
+ struct i802_bss *bss = priv;
+ struct wpa_driver_nl80211_data *drv = bss->drv;
+ drv->capa.flags |= WPA_DRIVER_FLAGS_BSS_SELECTION;
+ }
+
if (os_strstr(param, "no_offchannel_tx=1")) {
struct i802_bss *bss = priv;
struct wpa_driver_nl80211_data *drv = bss->drv;
}
+static int nl80211_put_mesh_config(struct nl_msg *msg,
+ struct wpa_driver_mesh_bss_params *params)
+{
+ struct nlattr *container;
+
+ container = nla_nest_start(msg, NL80211_ATTR_MESH_CONFIG);
+ if (!container)
+ return -1;
+
+ if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
+ nla_put_u32(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+ params->auto_plinks)) ||
+ ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) &&
+ nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
+ params->max_peer_links)))
+ return -1;
+
+ /*
+ * Set NL80211_MESHCONF_PLINK_TIMEOUT even if user mpm is used because
+ * the timer could disconnect stations even in that case.
+ */
+ if ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_PEER_LINK_TIMEOUT) &&
+ nla_put_u32(msg, NL80211_MESHCONF_PLINK_TIMEOUT,
+ params->peer_link_timeout)) {
+ wpa_printf(MSG_ERROR, "nl80211: Failed to set PLINK_TIMEOUT");
+ return -1;
+ }
+
+ if ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE) &&
+ nla_put_u16(msg, NL80211_MESHCONF_HT_OPMODE, params->ht_opmode)) {
+ wpa_printf(MSG_ERROR, "nl80211: Failed to set HT_OP_MODE");
+ return -1;
+ }
+
+ nla_nest_end(msg, container);
+
+ return 0;
+}
+
+
static int nl80211_join_mesh(struct i802_bss *bss,
struct wpa_driver_mesh_join_params *params)
{
goto fail;
nla_nest_end(msg, container);
- container = nla_nest_start(msg, NL80211_ATTR_MESH_CONFIG);
- if (!container)
- goto fail;
-
- if (!(params->conf.flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
- nla_put_u32(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS, 0))
- goto fail;
- if (nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
- params->max_peer_links))
- goto fail;
-
- /*
- * Set NL80211_MESHCONF_PLINK_TIMEOUT even if user mpm is used because
- * the timer could disconnect stations even in that case.
- */
- if (nla_put_u32(msg, NL80211_MESHCONF_PLINK_TIMEOUT,
- params->conf.peer_link_timeout)) {
- wpa_printf(MSG_ERROR, "nl80211: Failed to set PLINK_TIMEOUT");
+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS;
+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_PEER_LINK_TIMEOUT;
+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS;
+ if (nl80211_put_mesh_config(msg, ¶ms->conf) < 0)
goto fail;
- }
-
- nla_nest_end(msg, container);
ret = send_and_recv_msgs(drv, msg, NULL, NULL);
msg = NULL;
projects / mech_eap.git / blobdiff