if (drv->hostapd || bss->static_ap)
nlmode = NL80211_IFTYPE_AP;
- else if (bss->if_dynamic)
+ else if (bss->if_dynamic ||
+ nl80211_get_ifmode(bss) == NL80211_IFTYPE_MESH_POINT)
nlmode = nl80211_get_ifmode(bss);
else
nlmode = NL80211_IFTYPE_STATION;
}
+static int nl80211_put_dtim_period(struct nl_msg *msg, int dtim_period)
+{
+ if (dtim_period > 0) {
+ wpa_printf(MSG_DEBUG, " * dtim_period=%d", dtim_period);
+ return nla_put_u32(msg, NL80211_ATTR_DTIM_PERIOD, dtim_period);
+ }
+
+ return 0;
+}
+
+
static int wpa_driver_nl80211_set_ap(void *priv,
struct wpa_driver_ap_params *params)
{
nla_put(msg, NL80211_ATTR_BEACON_TAIL, params->tail_len,
params->tail) ||
nl80211_put_beacon_int(msg, params->beacon_int) ||
- nla_put_u32(msg, NL80211_ATTR_DTIM_PERIOD, params->dtim_period) ||
+ nl80211_put_dtim_period(msg, params->dtim_period) ||
nla_put(msg, NL80211_ATTR_SSID, params->ssid_len, params->ssid))
goto fail;
if (params->proberesp && params->proberesp_len) {
goto fail;
if (params->key_mgmt_suites & WPA_KEY_MGMT_IEEE8021X_NO_WPA &&
- params->pairwise_ciphers & (WPA_CIPHER_WEP104 | WPA_CIPHER_WEP40) &&
- nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT))
+ (!params->pairwise_ciphers ||
+ params->pairwise_ciphers & (WPA_CIPHER_WEP104 | WPA_CIPHER_WEP40)) &&
+ (nla_put_u16(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE, ETH_P_PAE) ||
+ nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT)))
goto fail;
wpa_printf(MSG_DEBUG, "nl80211: pairwise_ciphers=0x%x",
"nl80211: Frequency set succeeded for ht2040 coex");
bss->bandwidth = params->freq->bandwidth;
}
- } else if (!beacon_set) {
+ } else if (!beacon_set && params->freq) {
/*
* cfg80211 updates the driver on frequence change in AP
* mode only at the point when beaconing is started, so
wpa_printf(MSG_DEBUG, " * channel_type=%d", ct);
if (nla_put_u32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE, ct))
return -ENOBUFS;
+ } else {
+ wpa_printf(MSG_DEBUG, " * channel_type=%d",
+ NL80211_CHAN_NO_HT);
+ if (nla_put_u32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+ NL80211_CHAN_NO_HT))
+ return -ENOBUFS;
}
return 0;
}
if (!(params->flags & WPA_STA_ASSOCIATED))
upd.mask |= BIT(NL80211_STA_FLAG_ASSOCIATED);
}
+#ifdef CONFIG_MESH
+ } else {
+ if (params->plink_state == PLINK_ESTAB && params->peer_aid) {
+ ret = nla_put_u16(msg, NL80211_ATTR_MESH_PEER_AID,
+ params->peer_aid);
+ if (ret)
+ goto fail;
+ }
+#endif /* CONFIG_MESH */
}
wpa_printf(MSG_DEBUG, " * flags set=0x%x mask=0x%x",
"nl80211: Failed to subscribe for mgmt frames from SME driver - trying to run without it");
if (!drv->device_ap_sme && drv->use_monitor &&
- nl80211_create_monitor_interface(drv) &&
- !drv->device_ap_sme)
+ nl80211_create_monitor_interface(drv))
return -1;
if (drv->device_ap_sme &&
if (nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT))
return -1;
+ if (params->key_mgmt_suite == WPA_KEY_MGMT_IEEE8021X_NO_WPA &&
+ (params->pairwise_suite == WPA_CIPHER_NONE ||
+ params->pairwise_suite == WPA_CIPHER_WEP104 ||
+ params->pairwise_suite == WPA_CIPHER_WEP40) &&
+ (nla_put_u16(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE, ETH_P_PAE) ||
+ nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT)))
+ return -1;
+
if (params->mgmt_frame_protection == MGMT_FRAME_PROTECTION_REQUIRED &&
nla_put_u32(msg, NL80211_ATTR_USE_MFP, NL80211_MFP_REQUIRED))
return -1;
}
+static int nl80211_put_mesh_config(struct nl_msg *msg,
+ struct wpa_driver_mesh_bss_params *params)
+{
+ struct nlattr *container;
+
+ container = nla_nest_start(msg, NL80211_ATTR_MESH_CONFIG);
+ if (!container)
+ return -1;
+
+ if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
+ nla_put_u32(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+ params->auto_plinks)) ||
+ ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) &&
+ nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
+ params->max_peer_links)))
+ return -1;
+
+ /*
+ * Set NL80211_MESHCONF_PLINK_TIMEOUT even if user mpm is used because
+ * the timer could disconnect stations even in that case.
+ */
+ if ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_PEER_LINK_TIMEOUT) &&
+ nla_put_u32(msg, NL80211_MESHCONF_PLINK_TIMEOUT,
+ params->peer_link_timeout)) {
+ wpa_printf(MSG_ERROR, "nl80211: Failed to set PLINK_TIMEOUT");
+ return -1;
+ }
+
+ nla_nest_end(msg, container);
+
+ return 0;
+}
+
+
static int nl80211_join_mesh(struct i802_bss *bss,
struct wpa_driver_mesh_join_params *params)
{
nl80211_put_freq_params(msg, ¶ms->freq) ||
nl80211_put_basic_rates(msg, params->basic_rates) ||
nl80211_put_mesh_id(msg, params->meshid, params->meshid_len) ||
- nl80211_put_beacon_int(msg, params->beacon_int))
+ nl80211_put_beacon_int(msg, params->beacon_int) ||
+ nl80211_put_dtim_period(msg, params->dtim_period))
goto fail;
wpa_printf(MSG_DEBUG, " * flags=%08X", params->flags);
goto fail;
nla_nest_end(msg, container);
- container = nla_nest_start(msg, NL80211_ATTR_MESH_CONFIG);
- if (!container)
+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS;
+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_PEER_LINK_TIMEOUT;
+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS;
+ if (nl80211_put_mesh_config(msg, ¶ms->conf) < 0)
goto fail;
- if (!(params->conf.flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
- nla_put_u32(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS, 0))
- goto fail;
- if (nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
- params->max_peer_links))
- goto fail;
-
- /*
- * Set NL80211_MESHCONF_PLINK_TIMEOUT even if user mpm is used because
- * the timer could disconnect stations even in that case.
- */
- if (nla_put_u32(msg, NL80211_MESHCONF_PLINK_TIMEOUT,
- params->conf.peer_link_timeout)) {
- wpa_printf(MSG_ERROR, "nl80211: Failed to set PLINK_TIMEOUT");
- goto fail;
- }
-
- nla_nest_end(msg, container);
-
ret = send_and_recv_msgs(drv, msg, NULL, NULL);
msg = NULL;
if (ret) {
return 0;
}
+
+static int nl80211_p2p_lo_start(void *priv, unsigned int freq,
+ unsigned int period, unsigned int interval,
+ unsigned int count, const u8 *device_types,
+ size_t dev_types_len,
+ const u8 *ies, size_t ies_len)
+{
+ struct i802_bss *bss = priv;
+ struct wpa_driver_nl80211_data *drv = bss->drv;
+ struct nl_msg *msg;
+ struct nlattr *container;
+ int ret;
+
+ wpa_printf(MSG_DEBUG,
+ "nl80211: Start P2P Listen offload: freq=%u, period=%u, interval=%u, count=%u",
+ freq, period, interval, count);
+
+ if (!(drv->capa.flags & WPA_DRIVER_FLAGS_P2P_LISTEN_OFFLOAD))
+ return -1;
+
+ if (!(msg = nl80211_drv_msg(drv, 0, NL80211_CMD_VENDOR)) ||
+ nla_put_u32(msg, NL80211_ATTR_VENDOR_ID, OUI_QCA) ||
+ nla_put_u32(msg, NL80211_ATTR_VENDOR_SUBCMD,
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START))
+ goto fail;
+
+ container = nla_nest_start(msg, NL80211_ATTR_VENDOR_DATA);
+ if (!container)
+ goto fail;
+
+ if (nla_put_u32(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL,
+ freq) ||
+ nla_put_u32(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD,
+ period) ||
+ nla_put_u32(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL,
+ interval) ||
+ nla_put_u32(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT,
+ count) ||
+ nla_put(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES,
+ dev_types_len, device_types) ||
+ nla_put(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE,
+ ies_len, ies))
+ goto fail;
+
+ nla_nest_end(msg, container);
+ ret = send_and_recv_msgs(drv, msg, NULL, NULL);
+ msg = NULL;
+ if (ret) {
+ wpa_printf(MSG_DEBUG,
+ "nl80211: Failed to send P2P Listen offload vendor command");
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ nlmsg_free(msg);
+ return -1;
+}
+
+
+static int nl80211_p2p_lo_stop(void *priv)
+{
+ struct i802_bss *bss = priv;
+ struct wpa_driver_nl80211_data *drv = bss->drv;
+ struct nl_msg *msg;
+
+ wpa_printf(MSG_DEBUG, "nl80211: Stop P2P Listen offload");
+
+ if (!(drv->capa.flags & WPA_DRIVER_FLAGS_P2P_LISTEN_OFFLOAD))
+ return -1;
+
+ if (!(msg = nl80211_drv_msg(drv, 0, NL80211_CMD_VENDOR)) ||
+ nla_put_u32(msg, NL80211_ATTR_VENDOR_ID, OUI_QCA) ||
+ nla_put_u32(msg, NL80211_ATTR_VENDOR_SUBCMD,
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP)) {
+ nlmsg_free(msg);
+ return -1;
+ }
+
+ return send_and_recv_msgs(drv, msg, NULL, NULL);
+}
+
#endif /* CONFIG_DRIVER_NL80211_QCA */
.vendor_cmd = nl80211_vendor_cmd,
.set_qos_map = nl80211_set_qos_map,
.set_wowlan = nl80211_set_wowlan,
-#ifdef CONFIG_DRIVER_NL80211_QCA
- .roaming = nl80211_roaming,
-#endif /* CONFIG_DRIVER_NL80211_QCA */
.set_mac_addr = nl80211_set_mac_addr,
#ifdef CONFIG_MESH
.init_mesh = wpa_driver_nl80211_init_mesh,
.del_tx_ts = nl80211_del_ts,
.get_ifindex = nl80211_get_ifindex,
#ifdef CONFIG_DRIVER_NL80211_QCA
+ .roaming = nl80211_roaming,
.do_acs = wpa_driver_do_acs,
.set_band = nl80211_set_band,
.get_pref_freq_list = nl80211_get_pref_freq_list,
.set_prob_oper_freq = nl80211_set_prob_oper_freq,
+ .p2p_lo_start = nl80211_p2p_lo_start,
+ .p2p_lo_stop = nl80211_p2p_lo_stop,
+ .set_default_scan_ies = nl80211_set_default_scan_ies,
#endif /* CONFIG_DRIVER_NL80211_QCA */
.configure_data_frame_filters = nl80211_configure_data_frame_filters,
.get_ext_capab = nl80211_get_ext_capab,
projects / mech_eap.git / blobdiff