copy = True
return base64.b64decode(cert)
-def eap_connect(dev, ap, method, identity,
+def eap_connect(dev, hapd, method, identity,
sha256=False, expect_failure=False, local_error_report=False,
maybe_local_error=False, **kwargs):
- hapd = hostapd.Hostapd(ap['ifname'])
id = dev.connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap=method, identity=identity,
wait_connect=False, scan_freq="2412", ieee80211w="1",
def eap_check_auth(dev, method, initial, rsn=True, sha256=False,
expect_failure=False, local_error_report=False,
maybe_local_error=False):
- ev = dev.wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
+ ev = dev.wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev.wait_event(["CTRL-EVENT-EAP-METHOD",
if status["suppPortStatus"] != "Authorized":
raise Exception("Port not authorized")
+ if "selectedMethod" not in status:
+ logger.info("Status: " + str(status))
+ raise Exception("No selectedMethod in status")
if method not in status["selectedMethod"]:
raise Exception("Incorrect EAP method status")
if sha256:
"""WPA2-Enterprise connection using EAP-SIM"""
check_hlr_auc_gw_support()
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "SIM")
- eap_connect(dev[1], apdev[0], "SIM", "1232010000000001",
+ eap_connect(dev[1], hapd, "SIM", "1232010000000001",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
- eap_connect(dev[2], apdev[0], "SIM", "1232010000000002",
+ eap_connect(dev[2], hapd, "SIM", "1232010000000002",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
expect_failure=True)
logger.info("Negative test with incorrect key")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
expect_failure=True)
logger.info("Invalid GSM-Milenage key")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a",
expect_failure=True)
logger.info("Invalid GSM-Milenage key(2)")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a8q:cb9cccc4b9258e6dca4760379fb82581",
expect_failure=True)
logger.info("Invalid GSM-Milenage key(3)")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb8258q",
expect_failure=True)
logger.info("Invalid GSM-Milenage key(4)")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89qcb9cccc4b9258e6dca4760379fb82581",
expect_failure=True)
logger.info("Missing key configuration")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
expect_failure=True)
def test_ap_wpa2_eap_sim_sql(dev, apdev, params):
con = sqlite3.connect(os.path.join(params['logdir'], "hostapd.db"))
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "1814"
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
logger.info("SIM fast re-authentication")
eap_reauth(dev[0], "SIM", expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
with con:
cur = con.cursor()
eap_reauth(dev[0], "SIM")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
with con:
cur = con.cursor()
def test_ap_wpa2_eap_sim_config(dev, apdev):
"""EAP-SIM configuration options"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="SIM",
identity="1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
raise Exception("No EAP error message seen (2)")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
phase1="sim_min_num_chal=2")
- eap_connect(dev[1], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[1], hapd, "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
anonymous_identity="345678")
def _test_ap_wpa2_eap_sim_ext(dev, apdev):
check_hlr_auc_gw_support()
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].request("SET external_sim 1")
id = dev[0].connect("test-wpa2-eap", eap="SIM", key_mgmt="WPA-EAP",
identity="1232010000000000",
if ev is None:
raise Exception("EAP failure not reported")
+def test_ap_wpa2_eap_sim_ext_replace_sim(dev, apdev):
+ """EAP-SIM with external GSM auth and replacing SIM without clearing pseudonym id"""
+ try:
+ _test_ap_wpa2_eap_sim_ext_replace_sim(dev, apdev)
+ finally:
+ dev[0].request("SET external_sim 0")
+
+def _test_ap_wpa2_eap_sim_ext_replace_sim(dev, apdev):
+ check_hlr_auc_gw_support()
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0], params)
+ dev[0].request("SET external_sim 1")
+ id = dev[0].connect("test-wpa2-eap", eap="SIM", key_mgmt="WPA-EAP",
+ identity="1232010000000000",
+ wait_connect=False, scan_freq="2412")
+
+ ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
+ if ev is None:
+ raise Exception("Wait for external SIM processing request timed out")
+ p = ev.split(':', 2)
+ if p[1] != "GSM-AUTH":
+ raise Exception("Unexpected CTRL-REQ-SIM type")
+ rid = p[0].split('-')[3]
+ rand = p[2].split(' ')[0]
+
+ res = subprocess.check_output(["../../hostapd/hlr_auc_gw",
+ "-m",
+ "auth_serv/hlr_auc_gw.milenage_db",
+ "GSM-AUTH-REQ 232010000000000 " + rand])
+ if "GSM-AUTH-RESP" not in res:
+ raise Exception("Unexpected hlr_auc_gw response")
+ resp = res.split(' ')[2].rstrip()
+
+ dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:" + resp)
+ dev[0].wait_connected(timeout=15)
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+ # Replace SIM, but forget to drop the previous pseudonym identity
+ dev[0].set_network_quoted(id, "identity", "1232010000000009")
+ dev[0].select_network(id, freq="2412")
+
+ ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
+ if ev is None:
+ raise Exception("Wait for external SIM processing request timed out")
+ p = ev.split(':', 2)
+ if p[1] != "GSM-AUTH":
+ raise Exception("Unexpected CTRL-REQ-SIM type")
+ rid = p[0].split('-')[3]
+ rand = p[2].split(' ')[0]
+
+ res = subprocess.check_output(["../../hostapd/hlr_auc_gw",
+ "-m",
+ "auth_serv/hlr_auc_gw.milenage_db",
+ "GSM-AUTH-REQ 232010000000009 " + rand])
+ if "GSM-AUTH-RESP" not in res:
+ raise Exception("Unexpected hlr_auc_gw response")
+ resp = res.split(' ')[2].rstrip()
+
+ dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:" + resp)
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=15)
+ if ev is None:
+ raise Exception("EAP-Failure not reported")
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+def test_ap_wpa2_eap_sim_ext_replace_sim2(dev, apdev):
+ """EAP-SIM with external GSM auth and replacing SIM and clearing pseudonym identity"""
+ try:
+ _test_ap_wpa2_eap_sim_ext_replace_sim2(dev, apdev)
+ finally:
+ dev[0].request("SET external_sim 0")
+
+def _test_ap_wpa2_eap_sim_ext_replace_sim2(dev, apdev):
+ check_hlr_auc_gw_support()
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0], params)
+ dev[0].request("SET external_sim 1")
+ id = dev[0].connect("test-wpa2-eap", eap="SIM", key_mgmt="WPA-EAP",
+ identity="1232010000000000",
+ wait_connect=False, scan_freq="2412")
+
+ ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
+ if ev is None:
+ raise Exception("Wait for external SIM processing request timed out")
+ p = ev.split(':', 2)
+ if p[1] != "GSM-AUTH":
+ raise Exception("Unexpected CTRL-REQ-SIM type")
+ rid = p[0].split('-')[3]
+ rand = p[2].split(' ')[0]
+
+ res = subprocess.check_output(["../../hostapd/hlr_auc_gw",
+ "-m",
+ "auth_serv/hlr_auc_gw.milenage_db",
+ "GSM-AUTH-REQ 232010000000000 " + rand])
+ if "GSM-AUTH-RESP" not in res:
+ raise Exception("Unexpected hlr_auc_gw response")
+ resp = res.split(' ')[2].rstrip()
+
+ dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:" + resp)
+ dev[0].wait_connected(timeout=15)
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+ # Replace SIM and drop the previous pseudonym identity
+ dev[0].set_network_quoted(id, "identity", "1232010000000009")
+ dev[0].set_network(id, "anonymous_identity", "NULL")
+ dev[0].select_network(id, freq="2412")
+
+ ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
+ if ev is None:
+ raise Exception("Wait for external SIM processing request timed out")
+ p = ev.split(':', 2)
+ if p[1] != "GSM-AUTH":
+ raise Exception("Unexpected CTRL-REQ-SIM type")
+ rid = p[0].split('-')[3]
+ rand = p[2].split(' ')[0]
+
+ res = subprocess.check_output(["../../hostapd/hlr_auc_gw",
+ "-m",
+ "auth_serv/hlr_auc_gw.milenage_db",
+ "GSM-AUTH-REQ 232010000000009 " + rand])
+ if "GSM-AUTH-RESP" not in res:
+ raise Exception("Unexpected hlr_auc_gw response")
+ resp = res.split(' ')[2].rstrip()
+
+ dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:" + resp)
+ dev[0].wait_connected()
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+def test_ap_wpa2_eap_sim_ext_replace_sim3(dev, apdev):
+ """EAP-SIM with external GSM auth, replacing SIM, and no identity in config"""
+ try:
+ _test_ap_wpa2_eap_sim_ext_replace_sim3(dev, apdev)
+ finally:
+ dev[0].request("SET external_sim 0")
+
+def _test_ap_wpa2_eap_sim_ext_replace_sim3(dev, apdev):
+ check_hlr_auc_gw_support()
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0], params)
+ dev[0].request("SET external_sim 1")
+ id = dev[0].connect("test-wpa2-eap", eap="SIM", key_mgmt="WPA-EAP",
+ wait_connect=False, scan_freq="2412")
+
+ ev = dev[0].wait_event(["CTRL-REQ-IDENTITY"])
+ if ev is None:
+ raise Exception("Request for identity timed out")
+ rid = ev.split(':')[0].split('-')[-1]
+ dev[0].request("CTRL-RSP-IDENTITY-" + rid + ":1232010000000000")
+
+ ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
+ if ev is None:
+ raise Exception("Wait for external SIM processing request timed out")
+ p = ev.split(':', 2)
+ if p[1] != "GSM-AUTH":
+ raise Exception("Unexpected CTRL-REQ-SIM type")
+ rid = p[0].split('-')[3]
+ rand = p[2].split(' ')[0]
+
+ res = subprocess.check_output(["../../hostapd/hlr_auc_gw",
+ "-m",
+ "auth_serv/hlr_auc_gw.milenage_db",
+ "GSM-AUTH-REQ 232010000000000 " + rand])
+ if "GSM-AUTH-RESP" not in res:
+ raise Exception("Unexpected hlr_auc_gw response")
+ resp = res.split(' ')[2].rstrip()
+
+ dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:" + resp)
+ dev[0].wait_connected(timeout=15)
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+ # Replace SIM and drop the previous permanent and pseudonym identities
+ dev[0].set_network(id, "identity", "NULL")
+ dev[0].set_network(id, "anonymous_identity", "NULL")
+ dev[0].select_network(id, freq="2412")
+
+ ev = dev[0].wait_event(["CTRL-REQ-IDENTITY"])
+ if ev is None:
+ raise Exception("Request for identity timed out")
+ rid = ev.split(':')[0].split('-')[-1]
+ dev[0].request("CTRL-RSP-IDENTITY-" + rid + ":1232010000000009")
+
+ ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
+ if ev is None:
+ raise Exception("Wait for external SIM processing request timed out")
+ p = ev.split(':', 2)
+ if p[1] != "GSM-AUTH":
+ raise Exception("Unexpected CTRL-REQ-SIM type")
+ rid = p[0].split('-')[3]
+ rand = p[2].split(' ')[0]
+
+ res = subprocess.check_output(["../../hostapd/hlr_auc_gw",
+ "-m",
+ "auth_serv/hlr_auc_gw.milenage_db",
+ "GSM-AUTH-REQ 232010000000009 " + rand])
+ if "GSM-AUTH-RESP" not in res:
+ raise Exception("Unexpected hlr_auc_gw response")
+ resp = res.split(' ')[2].rstrip()
+
+ dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:" + resp)
+ dev[0].wait_connected()
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+def test_ap_wpa2_eap_sim_ext_auth_fail(dev, apdev):
+ """EAP-SIM with external GSM auth and auth failing"""
+ try:
+ _test_ap_wpa2_eap_sim_ext_auth_fail(dev, apdev)
+ finally:
+ dev[0].request("SET external_sim 0")
+
+def _test_ap_wpa2_eap_sim_ext_auth_fail(dev, apdev):
+ check_hlr_auc_gw_support()
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0], params)
+ dev[0].request("SET external_sim 1")
+ id = dev[0].connect("test-wpa2-eap", eap="SIM", key_mgmt="WPA-EAP",
+ identity="1232010000000000",
+ wait_connect=False, scan_freq="2412")
+
+ ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
+ if ev is None:
+ raise Exception("Wait for external SIM processing request timed out")
+ p = ev.split(':', 2)
+ rid = p[0].split('-')[3]
+ dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-FAIL")
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
+ if ev is None:
+ raise Exception("EAP failure not reported")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+def test_ap_wpa2_eap_sim_change_bssid(dev, apdev):
+ """EAP-SIM and external GSM auth to check fast reauth with bssid change"""
+ try:
+ _test_ap_wpa2_eap_sim_change_bssid(dev, apdev)
+ finally:
+ dev[0].request("SET external_sim 0")
+
+def _test_ap_wpa2_eap_sim_change_bssid(dev, apdev):
+ check_hlr_auc_gw_support()
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0], params)
+ dev[0].request("SET external_sim 1")
+ id = dev[0].connect("test-wpa2-eap", eap="SIM", key_mgmt="WPA-EAP",
+ identity="1232010000000000",
+ wait_connect=False, scan_freq="2412")
+
+ ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
+ if ev is None:
+ raise Exception("Wait for external SIM processing request timed out")
+ p = ev.split(':', 2)
+ if p[1] != "GSM-AUTH":
+ raise Exception("Unexpected CTRL-REQ-SIM type")
+ rid = p[0].split('-')[3]
+ rand = p[2].split(' ')[0]
+
+ res = subprocess.check_output(["../../hostapd/hlr_auc_gw",
+ "-m",
+ "auth_serv/hlr_auc_gw.milenage_db",
+ "GSM-AUTH-REQ 232010000000000 " + rand])
+ if "GSM-AUTH-RESP" not in res:
+ raise Exception("Unexpected hlr_auc_gw response")
+ resp = res.split(' ')[2].rstrip()
+
+ dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:" + resp)
+ dev[0].wait_connected(timeout=15)
+
+ # Verify that EAP-SIM Reauthentication can be used after a profile change
+ # that does not affect EAP parameters.
+ dev[0].set_network(id, "bssid", "any")
+ eap_reauth(dev[0], "SIM")
+
+def test_ap_wpa2_eap_sim_no_change_set(dev, apdev):
+ """EAP-SIM and external GSM auth to check fast reauth with no-change SET_NETWORK"""
+ try:
+ _test_ap_wpa2_eap_sim_no_change_set(dev, apdev)
+ finally:
+ dev[0].request("SET external_sim 0")
+
+def _test_ap_wpa2_eap_sim_no_change_set(dev, apdev):
+ check_hlr_auc_gw_support()
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0], params)
+ dev[0].request("SET external_sim 1")
+ id = dev[0].connect("test-wpa2-eap", eap="SIM", key_mgmt="WPA-EAP",
+ identity="1232010000000000",
+ wait_connect=False, scan_freq="2412")
+
+ ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
+ if ev is None:
+ raise Exception("Wait for external SIM processing request timed out")
+ p = ev.split(':', 2)
+ if p[1] != "GSM-AUTH":
+ raise Exception("Unexpected CTRL-REQ-SIM type")
+ rid = p[0].split('-')[3]
+ rand = p[2].split(' ')[0]
+
+ res = subprocess.check_output(["../../hostapd/hlr_auc_gw",
+ "-m",
+ "auth_serv/hlr_auc_gw.milenage_db",
+ "GSM-AUTH-REQ 232010000000000 " + rand])
+ if "GSM-AUTH-RESP" not in res:
+ raise Exception("Unexpected hlr_auc_gw response")
+ resp = res.split(' ')[2].rstrip()
+
+ dev[0].request("CTRL-RSP-SIM-" + rid + ":GSM-AUTH:" + resp)
+ dev[0].wait_connected(timeout=15)
+
+ # Verify that EAP-SIM Reauthentication can be used after network profile
+ # SET_NETWORK commands that do not actually change previously set
+ # parameter values.
+ dev[0].set_network(id, "key_mgmt", "WPA-EAP")
+ dev[0].set_network(id, "eap", "SIM")
+ dev[0].set_network_quoted(id, "identity", "1232010000000000")
+ dev[0].set_network_quoted(id, "ssid", "test-wpa2-eap")
+ eap_reauth(dev[0], "SIM")
+
def test_ap_wpa2_eap_sim_oom(dev, apdev):
"""EAP-SIM and OOM"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
tests = [ (1, "milenage_f2345"),
(2, "milenage_f2345"),
(3, "milenage_f2345"),
(11, "milenage_f2345"),
(12, "milenage_f2345") ]
for count, func in tests:
- with alloc_fail(dev[0], count, func):
+ with fail_test(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="SIM",
identity="1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
"""WPA2-Enterprise connection using EAP-AKA"""
check_hlr_auc_gw_support()
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "AKA")
logger.info("Negative test with incorrect key")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
expect_failure=True)
logger.info("Invalid Milenage key")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a",
expect_failure=True)
logger.info("Invalid Milenage key(2)")
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a8q:cb9cccc4b9258e6dca4760379fb82581:000000000123",
expect_failure=True)
logger.info("Invalid Milenage key(3)")
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb8258q:000000000123",
expect_failure=True)
logger.info("Invalid Milenage key(4)")
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:00000000012q",
expect_failure=True)
logger.info("Invalid Milenage key(5)")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581q000000000123",
expect_failure=True)
logger.info("Invalid Milenage key(6)")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="ffdca4eda45b53cf0f12d7c9c3bc6a89qcb9cccc4b9258e6dca4760379fb82581q000000000123",
expect_failure=True)
logger.info("Missing key configuration")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
expect_failure=True)
def test_ap_wpa2_eap_aka_sql(dev, apdev, params):
con = sqlite3.connect(os.path.join(params['logdir'], "hostapd.db"))
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "1814"
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123")
logger.info("AKA fast re-authentication")
eap_reauth(dev[0], "AKA", expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123")
with con:
cur = con.cursor()
eap_reauth(dev[0], "AKA")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123")
with con:
cur = con.cursor()
def test_ap_wpa2_eap_aka_config(dev, apdev):
"""EAP-AKA configuration options"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
anonymous_identity="2345678")
def _test_ap_wpa2_eap_aka_ext(dev, apdev):
check_hlr_auc_gw_support()
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].request("SET external_sim 1")
id = dev[0].connect("test-wpa2-eap", eap="AKA", key_mgmt="WPA-EAP",
identity="0232010000000000",
time.sleep(0.1)
dev[0].dump_monitor()
+def test_ap_wpa2_eap_aka_ext_auth_fail(dev, apdev):
+ """EAP-AKA with external UMTS auth and auth failing"""
+ try:
+ _test_ap_wpa2_eap_aka_ext_auth_fail(dev, apdev)
+ finally:
+ dev[0].request("SET external_sim 0")
+
+def _test_ap_wpa2_eap_aka_ext_auth_fail(dev, apdev):
+ check_hlr_auc_gw_support()
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0], params)
+ dev[0].request("SET external_sim 1")
+ id = dev[0].connect("test-wpa2-eap", eap="AKA", key_mgmt="WPA-EAP",
+ identity="0232010000000000",
+ wait_connect=False, scan_freq="2412")
+
+ ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
+ if ev is None:
+ raise Exception("Wait for external SIM processing request timed out")
+ p = ev.split(':', 2)
+ rid = p[0].split('-')[3]
+ dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-FAIL")
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
+ if ev is None:
+ raise Exception("EAP failure not reported")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
def test_ap_wpa2_eap_aka_prime(dev, apdev):
"""WPA2-Enterprise connection using EAP-AKA'"""
check_hlr_auc_gw_support()
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "AKA'")
logger.info("Negative test with incorrect key")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
+ eap_connect(dev[0], hapd, "AKA'", "6555444333222111",
password="ff22250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123",
expect_failure=True)
con = sqlite3.connect(os.path.join(params['logdir'], "hostapd.db"))
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "1814"
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123")
logger.info("AKA' fast re-authentication")
eap_reauth(dev[0], "AKA'", expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
+ eap_connect(dev[0], hapd, "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123")
with con:
cur = con.cursor()
eap_reauth(dev[0], "AKA'")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
+ eap_connect(dev[0], hapd, "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123")
with con:
cur = con.cursor()
logger.info("AKA' reauth with max reauth count reached")
eap_reauth(dev[0], "AKA'")
+def test_ap_wpa2_eap_aka_prime_ext_auth_fail(dev, apdev):
+ """EAP-AKA' with external UMTS auth and auth failing"""
+ try:
+ _test_ap_wpa2_eap_aka_prime_ext_auth_fail(dev, apdev)
+ finally:
+ dev[0].request("SET external_sim 0")
+
+def _test_ap_wpa2_eap_aka_prime_ext_auth_fail(dev, apdev):
+ check_hlr_auc_gw_support()
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0], params)
+ dev[0].request("SET external_sim 1")
+ id = dev[0].connect("test-wpa2-eap", eap="AKA'", key_mgmt="WPA-EAP",
+ identity="6555444333222111",
+ wait_connect=False, scan_freq="2412")
+
+ ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
+ if ev is None:
+ raise Exception("Wait for external SIM processing request timed out")
+ p = ev.split(':', 2)
+ rid = p[0].split('-')[3]
+ dev[0].request("CTRL-RSP-SIM-" + rid + ":UMTS-FAIL")
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=5)
+ if ev is None:
+ raise Exception("EAP failure not reported")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
def test_ap_wpa2_eap_ttls_pap(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/PAP"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
key_mgmt = hapd.get_config()['key_mgmt']
if key_mgmt.split(' ')[0] != "WPA-EAP":
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
hwsim_utils.test_connectivity(dev[0], hapd)
check_subject_match_support(dev[0])
check_altsubject_match_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
subject_match="/C=FI/O=w1.fi/CN=server.w1.fi",
def test_ap_wpa2_eap_ttls_pap_incorrect_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/PAP - incorrect password"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
expect_failure=True)
- eap_connect(dev[1], apdev[0], "TTLS", "user",
+ eap_connect(dev[1], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
expect_failure=True)
"""WPA2-Enterprise connection using EAP-TTLS/CHAP"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "chap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "chap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=CHAP")
hwsim_utils.test_connectivity(dev[0], hapd)
skip_with_fips(dev[0])
check_altsubject_match_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "chap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "chap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=CHAP",
altsubject_match="EMAIL:noone@example.com;URI:http://example.com/;DNS:server.w1.fi")
"""WPA2-Enterprise connection using EAP-TTLS/CHAP - incorrect password"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "chap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "chap user",
anonymous_identity="ttls", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="auth=CHAP",
expect_failure=True)
- eap_connect(dev[1], apdev[0], "TTLS", "user",
+ eap_connect(dev[1], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=CHAP",
expect_failure=True)
skip_with_fips(dev[0])
check_domain_suffix_match(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "mschap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "mschap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
domain_suffix_match="server.w1.fi")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "TTLS")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "TTLS", "mschap user",
+ eap_connect(dev[0], hapd, "TTLS", "mschap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
fragment_size="200")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
- eap_connect(dev[0], apdev[0], "TTLS", "mschap user",
+ eap_connect(dev[0], hapd, "TTLS", "mschap user",
anonymous_identity="ttls",
password_hex="hash:8846f7eaee8fb117ad06bdd830b7586c",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP")
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAP - incorrect password"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "mschap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "mschap user",
anonymous_identity="ttls", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
expect_failure=True)
- eap_connect(dev[1], apdev[0], "TTLS", "user",
+ eap_connect(dev[1], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
expect_failure=True)
- eap_connect(dev[2], apdev[0], "TTLS", "no such user",
+ eap_connect(dev[2], hapd, "TTLS", "no such user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
expect_failure=True)
check_domain_suffix_match(dev[0])
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
- eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
domain_suffix_match="server.w1.fi")
logger.info("Password as hash value")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
+ eap_connect(dev[0], hapd, "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls",
password_hex="hash:8846f7eaee8fb117ad06bdd830b7586c",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
def test_ap_wpa2_eap_ttls_invalid_phase2(dev, apdev):
"""EAP-TTLS with invalid phase2 parameter values"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
tests = [ "auth=MSCHAPv2", "auth=MSCHAPV2 autheap=MD5",
"autheap=MD5 auth=MSCHAPV2", "auth=PAP auth=CHAP",
"autheap=MD5 autheap=FOO autheap=MSCHAPV2" ]
check_domain_match_full(dev[0])
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
- eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
domain_suffix_match="w1.fi")
check_domain_match(dev[0])
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
- eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
domain_match="Server.w1.fi")
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2 - incorrect password"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password1",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
expect_failure=True)
- eap_connect(dev[1], apdev[0], "TTLS", "user",
+ eap_connect(dev[1], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
expect_failure=True)
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2 and UTF-8 password"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
- eap_connect(dev[0], apdev[0], "TTLS", "utf8-user-hash",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "utf8-user-hash",
anonymous_identity="ttls", password="secret-åäö-€-password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
- eap_connect(dev[1], apdev[0], "TTLS", "utf8-user",
+ eap_connect(dev[1], hapd, "TTLS", "utf8-user",
anonymous_identity="ttls",
password_hex="hash:bd5844fad2489992da7fe8c5a01559cf",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
def test_ap_wpa2_eap_ttls_eap_gtc(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-GTC"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=GTC")
hwsim_utils.test_connectivity(dev[0], hapd)
def test_ap_wpa2_eap_ttls_eap_gtc_incorrect_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-GTC - incorrect password"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "user",
anonymous_identity="ttls", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="autheap=GTC",
expect_failure=True)
def test_ap_wpa2_eap_ttls_eap_gtc_no_password(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-GTC - no password"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "user-no-passwd",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "user-no-passwd",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=GTC",
expect_failure=True)
def test_ap_wpa2_eap_ttls_eap_gtc_server_oom(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-GTC - server OOM"""
params = int_eap_server_params()
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
with alloc_fail(hapd, 1, "eap_gtc_init"):
- eap_connect(dev[0], apdev[0], "TTLS", "user",
+ eap_connect(dev[0], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=GTC",
expect_failure=True)
if hapd.request("GET_ALLOC_FAIL").startswith('0'):
break
+def test_ap_wpa2_eap_ttls_eap_gtc_oom(dev, apdev):
+ """WPA2-Enterprise connection using EAP-TTLS/EAP-GTC (OOM)"""
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ tests = [ "eap_gtc_init",
+ "eap_msg_alloc;eap_gtc_process" ]
+ for func in tests:
+ with alloc_fail(dev[0], 1, func):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
+ scan_freq="2412",
+ eap="TTLS", identity="user",
+ anonymous_identity="ttls", password="password",
+ ca_cert="auth_serv/ca.pem", phase2="autheap=GTC",
+ wait_connect=False)
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
def test_ap_wpa2_eap_ttls_eap_md5(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MD5"""
check_eap_capa(dev[0], "MD5")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MD5")
hwsim_utils.test_connectivity(dev[0], hapd)
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MD5 - incorrect password"""
check_eap_capa(dev[0], "MD5")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "user",
anonymous_identity="ttls", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="autheap=MD5",
expect_failure=True)
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MD5 - no password"""
check_eap_capa(dev[0], "MD5")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "user-no-passwd",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "user-no-passwd",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MD5",
expect_failure=True)
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MD5 - server OOM"""
check_eap_capa(dev[0], "MD5")
params = int_eap_server_params()
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
with alloc_fail(hapd, 1, "eap_md5_init"):
- eap_connect(dev[0], apdev[0], "TTLS", "user",
+ eap_connect(dev[0], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MD5",
expect_failure=True)
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MSCHAPv2"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2")
hwsim_utils.test_connectivity(dev[0], hapd)
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "TTLS", "user",
+ eap_connect(dev[0], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password1",
ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2",
expect_failure=True)
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MSCHAPv2 - no password"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "user-no-passwd",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "user-no-passwd",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2",
expect_failure=True)
"""WPA2-Enterprise connection using EAP-TTLS/EAP-MSCHAPv2 - server OOM"""
check_eap_capa(dev[0], "MSCHAPV2")
params = int_eap_server_params()
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
with alloc_fail(hapd, 1, "eap_mschapv2_init"):
- eap_connect(dev[0], apdev[0], "TTLS", "user",
+ eap_connect(dev[0], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=MSCHAPV2",
expect_failure=True)
def test_ap_wpa2_eap_ttls_eap_aka(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-AKA"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "0232010000000000",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "0232010000000000",
anonymous_identity="0232010000000000@ttls",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
ca_cert="auth_serv/ca.pem", phase2="autheap=AKA")
def test_ap_wpa2_eap_peap_eap_aka(dev, apdev):
"""WPA2-Enterprise connection using EAP-PEAP/EAP-AKA"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PEAP", "0232010000000000",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PEAP", "0232010000000000",
anonymous_identity="0232010000000000@peap",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
ca_cert="auth_serv/ca.pem", phase2="auth=AKA")
"""WPA2-Enterprise connection using EAP-FAST/EAP-AKA"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "FAST", "0232010000000000",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "FAST", "0232010000000000",
anonymous_identity="0232010000000000@fast",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
phase1="fast_provisioning=2",
"""WPA2-Enterprise connection using EAP-PEAP/EAP-MSCHAPv2"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PEAP", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PEAP", "user",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "PEAP")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "PEAP", "user",
+ eap_connect(dev[0], hapd, "PEAP", "user",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
fragment_size="200")
logger.info("Password as hash value")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "PEAP", "user",
+ eap_connect(dev[0], hapd, "PEAP", "user",
anonymous_identity="peap",
password_hex="hash:8846f7eaee8fb117ad06bdd830b7586c",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "PEAP", "user",
+ eap_connect(dev[0], hapd, "PEAP", "user",
anonymous_identity="peap", password="password1",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
expect_failure=True)
"""WPA2-Enterprise connection using EAP-PEAP/EAP-MSCHAPv2 with domain"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PEAP", "DOMAIN\user3",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PEAP", "DOMAIN\user3",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
hwsim_utils.test_connectivity(dev[0], hapd)
"""WPA2-Enterprise connection using EAP-PEAP/EAP-MSCHAPv2 - incorrect password"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PEAP", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PEAP", "user",
anonymous_identity="peap", password="wrong",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
expect_failure=True)
"""WPA2-Enterprise connection using EAP-PEAPv0/EAP-MSCHAPv2 and crypto binding"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PEAP", "user", password="password",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peapver=0 crypto_binding=2",
phase2="auth=MSCHAPV2")
hwsim_utils.test_connectivity(dev[0], hapd)
eap_reauth(dev[0], "PEAP")
- eap_connect(dev[1], apdev[0], "PEAP", "user", password="password",
+ eap_connect(dev[1], hapd, "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peapver=0 crypto_binding=1",
phase2="auth=MSCHAPV2")
- eap_connect(dev[2], apdev[0], "PEAP", "user", password="password",
+ eap_connect(dev[2], hapd, "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peapver=0 crypto_binding=0",
phase2="auth=MSCHAPV2")
"""WPA2-Enterprise connection using EAP-PEAPv0/EAP-MSCHAPv2 and crypto binding with server OOM"""
check_eap_capa(dev[0], "MSCHAPV2")
params = int_eap_server_params()
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
with alloc_fail(hapd, 1, "eap_mschapv2_getKey"):
- eap_connect(dev[0], apdev[0], "PEAP", "user", password="password",
+ eap_connect(dev[0], hapd, "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peapver=0 crypto_binding=2",
phase2="auth=MSCHAPV2",
"""WPA2-Enterprise connection using EAP-PEAPv0/EAP-MSCHAPv2 and various parameters"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PEAP", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PEAP", "user",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="peapver=0 peaplabel=1",
# This won't succeed to connect with peap_outer_success=0, so stop here.
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
- eap_connect(dev[1], apdev[0], "PEAP", "user", password="password",
+ eap_connect(dev[1], hapd, "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peap_outer_success=1",
phase2="auth=MSCHAPV2")
- eap_connect(dev[2], apdev[0], "PEAP", "user", password="password",
+ eap_connect(dev[2], hapd, "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peap_outer_success=2",
phase2="auth=MSCHAPV2")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
- eap_connect(dev[0], apdev[0], "PEAP", "user", password="password",
+ eap_connect(dev[0], hapd, "PEAP", "user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="tls_allow_md5=1 tls_disable_session_ticket=1 tls_disable_tlsv1_0=0 tls_disable_tlsv1_1=0 tls_disable_tlsv1_2=0 tls_ext_cert_check=0",
phase2="auth=MSCHAPV2")
def test_ap_wpa2_eap_peap_eap_tls(dev, apdev):
"""WPA2-Enterprise connection using EAP-PEAP/EAP-TLS"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PEAP", "cert user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PEAP", "cert user",
ca_cert="auth_serv/ca.pem", phase2="auth=TLS",
ca_cert2="auth_serv/ca.pem",
client_cert2="auth_serv/user.pem",
def test_ap_wpa2_eap_tls(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
eap_reauth(dev[0], "TLS")
def test_eap_tls_pkcs8_pkcs5_v2_des3(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and PKCS #8, PKCS #5 v2 DES3 key"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key.pkcs8",
private_key_passwd="whatever")
def test_eap_tls_pkcs8_pkcs5_v15(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and PKCS #8, PKCS #5 v1.5 key"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key.pkcs8.pkcs5v15",
private_key_passwd="whatever")
def test_ap_wpa2_eap_tls_blob(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and config blobs"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
cert = read_pem("auth_serv/ca.pem")
if "OK" not in dev[0].request("SET blob cacert " + cert.encode("hex")):
raise Exception("Could not set cacert blob")
key = read_pem("auth_serv/user.rsa-key")
if "OK" not in dev[0].request("SET blob userkey " + key.encode("hex")):
raise Exception("Could not set cacert blob")
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="blob://cacert",
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="blob://cacert",
client_cert="blob://usercert",
private_key="blob://userkey")
def test_ap_wpa2_eap_tls_blob_missing(dev, apdev):
"""EAP-TLS and config blob missing"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user",
ca_cert="blob://testing-blob-does-not-exist",
def test_ap_wpa2_eap_tls_with_tls_len(dev, apdev):
"""EAP-TLS and TLS Message Length in unfragmented packets"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
phase1="include_tls_length=1",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
"""WPA2-Enterprise connection using EAP-TLS and PKCS#12"""
check_pkcs12_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever")
dev[0].request("REMOVE_NETWORK all")
# client certificate.
for pkcs12 in "auth_serv/user2.pkcs12", "auth_serv/user3.pkcs12":
for i in range(2):
- eap_connect(dev[0], apdev[0], "TLS", "tls user",
+ eap_connect(dev[0], hapd, "TLS", "tls user",
ca_cert="auth_serv/ca.pem",
private_key=pkcs12,
private_key_passwd="whatever")
"""WPA2-Enterprise connection using EAP-TLS and PKCS#12 from configuration blob"""
check_pkcs12_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
cert = read_pem("auth_serv/ca.pem")
if "OK" not in dev[0].request("SET blob cacert " + cert.encode("hex")):
raise Exception("Could not set cacert blob")
with open("auth_serv/user.pkcs12", "rb") as f:
if "OK" not in dev[0].request("SET blob pkcs12 " + f.read().encode("hex")):
raise Exception("Could not set pkcs12 blob")
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="blob://cacert",
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="blob://cacert",
private_key="blob://pkcs12",
private_key_passwd="whatever")
"""WPA2-Enterprise negative test - incorrect trust root"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
cert = read_pem("auth_serv/ca-incorrect.pem")
if "OK" not in dev[0].request("SET blob cacert " + cert.encode("hex")):
raise Exception("Could not set cacert blob")
wait_connect=False, scan_freq="2412")
for dev in (dev[0], dev[1]):
- ev = dev.wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
+ ev = dev.wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
def test_ap_wpa2_eap_tls_diff_ca_trust(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/PAP and different CA trust"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", anonymous_identity="ttls",
password="password", phase2="auth=PAP",
def test_ap_wpa2_eap_tls_diff_ca_trust2(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/PAP and different CA trust"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", anonymous_identity="ttls",
password="password", phase2="auth=PAP",
def test_ap_wpa2_eap_tls_diff_ca_trust3(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/PAP and different CA trust"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", anonymous_identity="ttls",
password="password", phase2="auth=PAP",
"""WPA2-Enterprise negative test - domain suffix mismatch"""
check_domain_suffix_match(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
domain_suffix_match="incorrect.example.com",
wait_connect=False, scan_freq="2412")
- ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
"""WPA2-Enterprise negative test - domain mismatch"""
check_domain_match(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
domain_match="w1.fi",
wait_connect=False, scan_freq="2412")
- ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
def test_ap_wpa2_eap_tls_neg_subject_match(dev, apdev):
"""WPA2-Enterprise negative test - subject mismatch"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
subject_match="/C=FI/O=w1.fi/CN=example.com",
wait_connect=False, scan_freq="2412")
- ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
def test_ap_wpa2_eap_tls_neg_altsubject_match(dev, apdev):
"""WPA2-Enterprise negative test - altsubject mismatch"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
tests = [ "incorrect.example.com",
"DNS:incorrect.example.com",
altsubject_match=match,
wait_connect=False, scan_freq="2412")
- ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
def test_ap_wpa2_eap_unauth_tls(dev, apdev):
"""WPA2-Enterprise connection using UNAUTH-TLS"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "UNAUTH-TLS", "unauth-tls",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "UNAUTH-TLS", "unauth-tls",
ca_cert="auth_serv/ca.pem")
eap_reauth(dev[0], "UNAUTH-TLS")
"""WPA2-Enterprise connection using EAP-TTLS and server certificate hash"""
check_cert_probe_support(dev[0])
skip_with_fips(dev[0])
- srv_cert_hash = "e75bd454c7b02d312e5006d75067c28ffa5baea422effeb2bbd572179cd000ca"
+ srv_cert_hash = "bdb9cb55d3df278e52a071abf58e7f0238fbec3ad8fb2c254742f63562628272"
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="probe", ca_cert="probe://",
wait_connect=False, scan_freq="2412")
- ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PEER-CERT depth=0"], timeout=10)
password="password", phase2="auth=MSCHAPV2",
ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a",
wait_connect=False, scan_freq="2412")
- ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-TLS-CERT-ERROR"], timeout=10)
dev[0].wait_disconnected(timeout=10)
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
+ eap_connect(dev[0], hapd, "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password",
ca_cert="hash://server/sha256/" + srv_cert_hash,
phase2="auth=MSCHAPV2")
def test_ap_wpa2_eap_ttls_server_cert_hash_invalid(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS and server certificate hash (invalid config)"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="DOMAIN\mschapv2 user", anonymous_identity="ttls",
password="password", phase2="auth=MSCHAPV2",
ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6Q",
wait_connect=False, scan_freq="2412")
for i in range(0, 3):
- ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
+ ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[i].wait_event(["EAP: Failed to initialize EAP method: vendor 0 method 21 (TTLS)"], timeout=5)
"""WPA2-Enterprise connection using EAP-pwd"""
check_eap_capa(dev[0], "PWD")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PWD", "pwd user", password="secret password")
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PWD", "pwd user", password="secret password")
eap_reauth(dev[0], "PWD")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[1], apdev[0], "PWD",
+ eap_connect(dev[1], hapd, "PWD",
"pwd.user@test123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890.example.com",
password="secret password",
fragment_size="90")
logger.info("Negative test with incorrect password")
- eap_connect(dev[2], apdev[0], "PWD", "pwd user", password="secret-password",
+ eap_connect(dev[2], hapd, "PWD", "pwd user", password="secret-password",
expect_failure=True, local_error_report=True)
- eap_connect(dev[0], apdev[0], "PWD",
+ eap_connect(dev[0], hapd, "PWD",
"pwd.user@test123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890.example.com",
password="secret password",
fragment_size="31")
check_eap_capa(dev[0], "PWD")
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PWD", "pwd-hash", password="secret password")
- eap_connect(dev[1], apdev[0], "PWD", "pwd-hash",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PWD", "pwd-hash", password="secret password")
+ eap_connect(dev[1], hapd, "PWD", "pwd-hash",
password_hex="hash:e3718ece8ab74792cbbfffd316d2d19a")
- eap_connect(dev[2], apdev[0], "PWD", "pwd user",
+ eap_connect(dev[2], hapd, "PWD", "pwd user",
password_hex="hash:e3718ece8ab74792cbbfffd316d2d19a",
expect_failure=True, local_error_report=True)
for i in groups:
logger.info("Group %d" % i)
params['pwd_group'] = str(i)
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
try:
- eap_connect(dev[0], apdev[0], "PWD", "pwd user",
+ eap_connect(dev[0], hapd, "PWD", "pwd user",
password="secret password")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
"rsn_pairwise": "CCMP", "ieee8021x": "1",
"eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf" }
params['pwd_group'] = "0"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PWD",
identity="pwd user", password="secret password",
scan_freq="2412", wait_connect=False)
"rsn_pairwise": "CCMP", "ieee8021x": "1",
"eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf",
"pwd_group": "19", "fragment_size": "40" }
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PWD", "pwd user", password="secret password")
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PWD", "pwd user", password="secret password")
def test_ap_wpa2_eap_gpsk(dev, apdev):
"""WPA2-Enterprise connection using EAP-GPSK"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- id = eap_connect(dev[0], apdev[0], "GPSK", "gpsk user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ id = eap_connect(dev[0], hapd, "GPSK", "gpsk user",
password="abcdefghijklmnop0123456789abcdef")
eap_reauth(dev[0], "GPSK")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "GPSK", "gpsk user",
+ eap_connect(dev[0], hapd, "GPSK", "gpsk user",
password="ffcdefghijklmnop0123456789abcdef",
expect_failure=True)
def test_ap_wpa2_eap_sake(dev, apdev):
"""WPA2-Enterprise connection using EAP-SAKE"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "SAKE", "sake user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "SAKE", "sake user",
password_hex="0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef")
eap_reauth(dev[0], "SAKE")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "SAKE", "sake user",
+ eap_connect(dev[0], hapd, "SAKE", "sake user",
password_hex="ff23456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef",
expect_failure=True)
def test_ap_wpa2_eap_eke(dev, apdev):
"""WPA2-Enterprise connection using EAP-EKE"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- id = eap_connect(dev[0], apdev[0], "EKE", "eke user", password="hello")
+ hapd = hostapd.add_ap(apdev[0], params)
+ id = eap_connect(dev[0], hapd, "EKE", "eke user", password="hello")
eap_reauth(dev[0], "EKE")
logger.info("Test forced algorithm selection")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "EKE", "eke user", password="hello1",
+ eap_connect(dev[0], hapd, "EKE", "eke user", password="hello1",
expect_failure=True)
def test_ap_wpa2_eap_eke_many(dev, apdev, params):
if not params['long']:
raise HwsimSkip("Skip test case with long duration due to --long not specified")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
success = 0
fail = 0
for i in range(100):
"""WPA2-Enterprise connection using EAP-EKE with serverid NAI"""
params = int_eap_server_params()
params['server_id'] = 'example.server@w1.fi'
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "EKE", "eke user", password="hello")
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "EKE", "eke user", password="hello")
def test_ap_wpa2_eap_eke_server_oom(dev, apdev):
"""WPA2-Enterprise connection using EAP-EKE with server OOM"""
params = int_eap_server_params()
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
for count,func in [ (1, "eap_eke_build_commit"),
(3, "eap_eke_process_identity"),
(4, "eap_eke_process_identity") ]:
with alloc_fail(hapd, count, func):
- eap_connect(dev[0], apdev[0], "EKE", "eke user", password="hello",
+ eap_connect(dev[0], hapd, "EKE", "eke user", password="hello",
expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
"""WPA2-Enterprise connection using EAP-IKEv2"""
check_eap_capa(dev[0], "IKEV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "IKEV2", "ikev2 user",
password="ike password")
eap_reauth(dev[0], "IKEV2")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user",
+ eap_connect(dev[0], hapd, "IKEV2", "ikev2 user",
password="ike password", fragment_size="50")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user",
+ eap_connect(dev[0], hapd, "IKEV2", "ikev2 user",
password="ike-password", expect_failure=True)
+ dev[0].request("REMOVE_NETWORK all")
+
+ eap_connect(dev[0], hapd, "IKEV2", "ikev2 user",
+ password="ike password", fragment_size="0")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
def test_ap_wpa2_eap_ikev2_as_frag(dev, apdev):
"""WPA2-Enterprise connection using EAP-IKEv2 with server fragmentation"""
"rsn_pairwise": "CCMP", "ieee8021x": "1",
"eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf",
"fragment_size": "50" }
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "IKEV2", "ikev2 user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "IKEV2", "ikev2 user",
password="ike password")
eap_reauth(dev[0], "IKEV2")
"""WPA2-Enterprise connection using EAP-IKEv2 and OOM"""
check_eap_capa(dev[0], "IKEV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
tests = [ (1, "dh_init"),
(2, "dh_init"),
def test_ap_wpa2_eap_pax(dev, apdev):
"""WPA2-Enterprise connection using EAP-PAX"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PAX", "pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef")
eap_reauth(dev[0], "PAX")
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com",
+ eap_connect(dev[0], hapd, "PAX", "pax.user@example.com",
password_hex="ff23456789abcdef0123456789abcdef",
expect_failure=True)
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params["wpa_key_mgmt"] = "WPA-EAP-SHA256"
params["ieee80211w"] = "2"
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PSK", "psk.user@example.com",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PSK", "psk.user@example.com",
password_hex="0123456789abcdef0123456789abcdef", sha256=True)
eap_reauth(dev[0], "PSK", sha256=True)
check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-5"),
logger.info("Negative test with incorrect password")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "PSK", "psk.user@example.com",
+ eap_connect(dev[0], hapd, "PSK", "psk.user@example.com",
password_hex="ff23456789abcdef0123456789abcdef", sha256=True,
expect_failure=True)
"""WPA2-Enterprise connection using EAP-PSK and OOM"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
+ tests = [ (1, "=aes_128_eax_encrypt"),
+ (1, "=aes_128_eax_decrypt") ]
+ for count, func in tests:
+ with alloc_fail(dev[0], count, func):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PSK",
+ identity="psk.user@example.com",
+ password_hex="0123456789abcdef0123456789abcdef",
+ wait_connect=False, scan_freq="2412")
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=5)
+ if ev is None:
+ raise Exception("EAP method not selected")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL",
+ note="Failure not triggered: %d:%s" % (count, func))
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
tests = [ (1, "aes_128_ctr_encrypt;aes_128_eax_encrypt"),
(1, "omac1_aes_128;aes_128_eax_encrypt"),
(2, "omac1_aes_128;aes_128_eax_encrypt"),
(3, "omac1_aes_128;aes_128_eax_encrypt"),
- (1, "=aes_128_eax_encrypt"),
(1, "omac1_aes_vector"),
- (1, "aes_128_ctr_encrypt;aes_128_eax_decrypt"),
(1, "omac1_aes_128;aes_128_eax_decrypt"),
(2, "omac1_aes_128;aes_128_eax_decrypt"),
(3, "omac1_aes_128;aes_128_eax_decrypt"),
- (1, "=aes_128_eax_decrypt") ]
+ (1, "aes_128_ctr_encrypt;aes_128_eax_decrypt") ]
for count, func in tests:
- with alloc_fail(dev[0], count, func):
+ with fail_test(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PSK",
identity="psk.user@example.com",
password_hex="0123456789abcdef0123456789abcdef",
ev = dev[0].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=5)
if ev is None:
raise Exception("EAP method not selected")
- for i in range(10):
- if "0:" in dev[0].request("GET_ALLOC_FAIL"):
- break
- time.sleep(0.02)
+ wait_fail_trigger(dev[0], "GET_FAIL",
+ note="Failure not triggered: %d:%s" % (count, func))
dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
- with alloc_fail(dev[0], 1, "aes_128_encrypt_block"):
+ with fail_test(dev[0], 1, "aes_128_encrypt_block"):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PSK",
identity="psk.user@example.com",
password_hex="0123456789abcdef0123456789abcdef",
if ev is None:
raise Exception("EAP method failure not reported")
dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
def test_ap_wpa_eap_peap_eap_mschapv2(dev, apdev):
"""WPA-Enterprise connection using EAP-PEAP/EAP-MSCHAPv2"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa_eap_params(ssid="test-wpa-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="PEAP",
identity="user", password="password", phase2="auth=MSCHAPV2",
ca_cert="auth_serv/ca.pem", wait_connect=False,
"""WPA2-Enterprise connection using interactive identity/password entry"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0], params)
tests = [ ("Connection with dynamic TTLS/MSCHAPv2 password entry",
"TTLS", "ttls", "DOMAIN\mschapv2 user", "auth=MSCHAPV2",
"""WPA2-Enterprise interactive identity entry and ENABLE_NETWORK"""
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0], params)
id_other = dev[0].connect("other", key_mgmt="NONE", scan_freq="2412",
only_add_network=True)
def test_ap_wpa2_eap_vendor_test(dev, apdev):
"""WPA2-Enterprise connection using EAP vendor test"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "VENDOR-TEST", "vendor-test")
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "VENDOR-TEST", "vendor-test")
eap_reauth(dev[0], "VENDOR-TEST")
- eap_connect(dev[1], apdev[0], "VENDOR-TEST", "vendor-test",
+ eap_connect(dev[1], hapd, "VENDOR-TEST", "vendor-test",
password="pending")
+def test_ap_wpa2_eap_vendor_test_oom(dev, apdev):
+ """WPA2-Enterprise connection using EAP vendor test (OOM)"""
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0], params)
+
+ tests = [ "eap_vendor_test_init",
+ "eap_msg_alloc;eap_vendor_test_process",
+ "eap_vendor_test_getKey" ]
+ for func in tests:
+ with alloc_fail(dev[0], 1, func):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
+ scan_freq="2412",
+ eap="VENDOR-TEST", identity="vendor-test",
+ wait_connect=False)
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
def test_ap_wpa2_eap_fast_mschapv2_unauth_prov(dev, apdev):
"""WPA2-Enterprise connection using EAP-FAST/MSCHAPv2 and unauthenticated provisioning"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "FAST", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_provisioning=1", pac_file="blob://fast_pac")
pac_file = os.path.join(params['logdir'], "fast.pac")
pac_file2 = os.path.join(params['logdir'], "fast-bin.pac")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
try:
- eap_connect(dev[0], apdev[0], "FAST", "user",
+ eap_connect(dev[0], hapd, "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_provisioning=1", pac_file=pac_file)
if "PAC-Key=" not in data:
raise Exception("PAC-Key missing from PAC file")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "FAST", "user",
+ eap_connect(dev[0], hapd, "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
pac_file=pac_file)
- eap_connect(dev[1], apdev[0], "FAST", "user",
+ eap_connect(dev[1], hapd, "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_provisioning=1 fast_pac_format=binary",
pac_file=pac_file2)
dev[1].request("REMOVE_NETWORK all")
- eap_connect(dev[1], apdev[0], "FAST", "user",
+ eap_connect(dev[1], hapd, "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_pac_format=binary",
"""WPA2-Enterprise connection using EAP-FAST and binary PAC format"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "FAST", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_provisioning=1 fast_max_pac_list_len=1 fast_pac_format=binary",
if res['tls_session_reused'] != '1':
raise Exception("EAP-FAST could not use PAC session ticket")
+ # Verify fast_max_pac_list_len=0 special case
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+ eap_connect(dev[0], hapd, "FAST", "user",
+ anonymous_identity="FAST", password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1 fast_max_pac_list_len=0 fast_pac_format=binary",
+ pac_file="blob://fast_pac_bin")
+
def test_ap_wpa2_eap_fast_missing_pac_config(dev, apdev):
"""WPA2-Enterprise connection using EAP-FAST and missing PAC config"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
identity="user", anonymous_identity="FAST",
if ev is None:
raise Exception("Timeout on EAP failure report")
+def test_ap_wpa2_eap_fast_binary_pac_errors(dev, apdev):
+ """EAP-FAST and binary PAC errors"""
+ check_eap_capa(dev[0], "FAST")
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ tests = [ (1, "=eap_fast_save_pac_bin"),
+ (1, "eap_fast_write_pac"),
+ (2, "eap_fast_write_pac"), ]
+ for count, func in tests:
+ if "OK" not in dev[0].request("SET blob fast_pac_bin_errors "):
+ raise Exception("Could not set blob")
+
+ with alloc_fail(dev[0], count, func):
+ eap_connect(dev[0], hapd, "FAST", "user",
+ anonymous_identity="FAST", password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1 fast_pac_format=binary",
+ pac_file="blob://fast_pac_bin_errors")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ tests = [ "00", "000000000000", "6ae4920c0001",
+ "6ae4920c000000",
+ "6ae4920c0000" + "0000" + 32*"00" + "ffff" + "0000",
+ "6ae4920c0000" + "0000" + 32*"00" + "0001" + "0000",
+ "6ae4920c0000" + "0000" + 32*"00" + "0000" + "0001",
+ "6ae4920c0000" + "0000" + 32*"00" + "0000" + "0008" + "00040000" + "0007000100"]
+ for t in tests:
+ if "OK" not in dev[0].request("SET blob fast_pac_bin_errors " + t):
+ raise Exception("Could not set blob")
+
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
+ identity="user", anonymous_identity="FAST",
+ password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1 fast_pac_format=binary",
+ pac_file="blob://fast_pac_bin_errors",
+ scan_freq="2412", wait_connect=False)
+ ev = dev[0].wait_event(["EAP: Failed to initialize EAP method"],
+ timeout=5)
+ if ev is None:
+ raise Exception("Failure not reported")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ pac = "6ae4920c0000" + "0000" + 32*"00" + "0000" + "0000"
+ tests = [ (1, "eap_fast_load_pac_bin"),
+ (2, "eap_fast_load_pac_bin"),
+ (3, "eap_fast_load_pac_bin") ]
+ for count, func in tests:
+ if "OK" not in dev[0].request("SET blob fast_pac_bin_errors " + pac):
+ raise Exception("Could not set blob")
+
+ with alloc_fail(dev[0], count, func):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
+ identity="user", anonymous_identity="FAST",
+ password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1 fast_pac_format=binary",
+ pac_file="blob://fast_pac_bin_errors",
+ scan_freq="2412", wait_connect=False)
+ ev = dev[0].wait_event(["EAP: Failed to initialize EAP method"],
+ timeout=5)
+ if ev is None:
+ raise Exception("Failure not reported")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ pac = "6ae4920c0000" + "0000" + 32*"00" + "0000" + "0005" + "0011223344"
+ if "OK" not in dev[0].request("SET blob fast_pac_bin_errors " + pac):
+ raise Exception("Could not set blob")
+
+ eap_connect(dev[0], hapd, "FAST", "user",
+ anonymous_identity="FAST", password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1 fast_pac_format=binary",
+ pac_file="blob://fast_pac_bin_errors")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ pac = "6ae4920c0000" + "0000" + 32*"00" + "0000" + "0009" + "00040000" + "0007000100"
+ tests = [ (1, "eap_fast_pac_get_a_id"),
+ (2, "eap_fast_pac_get_a_id") ]
+ for count, func in tests:
+ if "OK" not in dev[0].request("SET blob fast_pac_bin_errors " + pac):
+ raise Exception("Could not set blob")
+ with alloc_fail(dev[0], count, func):
+ eap_connect(dev[0], hapd, "FAST", "user",
+ anonymous_identity="FAST", password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1 fast_pac_format=binary",
+ pac_file="blob://fast_pac_bin_errors")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+def test_ap_wpa2_eap_fast_text_pac_errors(dev, apdev):
+ """EAP-FAST and text PAC errors"""
+ check_eap_capa(dev[0], "FAST")
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0], params)
+
+ tests = [ (1, "eap_fast_parse_hex;eap_fast_parse_pac_key"),
+ (1, "eap_fast_parse_hex;eap_fast_parse_pac_opaque"),
+ (1, "eap_fast_parse_hex;eap_fast_parse_a_id"),
+ (1, "eap_fast_parse_start"),
+ (1, "eap_fast_save_pac") ]
+ for count, func in tests:
+ dev[0].request("FLUSH")
+ if "OK" not in dev[0].request("SET blob fast_pac_text_errors "):
+ raise Exception("Could not set blob")
+
+ with alloc_fail(dev[0], count, func):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
+ identity="user", anonymous_identity="FAST",
+ password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1",
+ pac_file="blob://fast_pac_text_errors",
+ scan_freq="2412", wait_connect=False)
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ pac = "wpa_supplicant EAP-FAST PAC file - version 1\n"
+ pac += "START\n"
+ pac += "PAC-Type\n"
+ pac += "END\n"
+ if "OK" not in dev[0].request("SET blob fast_pac_text_errors " + pac.encode("hex")):
+ raise Exception("Could not set blob")
+
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
+ identity="user", anonymous_identity="FAST",
+ password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1",
+ pac_file="blob://fast_pac_text_errors",
+ scan_freq="2412", wait_connect=False)
+ ev = dev[0].wait_event(["EAP: Failed to initialize EAP method"], timeout=5)
+ if ev is None:
+ raise Exception("Failure not reported")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ dev[0].request("FLUSH")
+ if "OK" not in dev[0].request("SET blob fast_pac_text_errors "):
+ raise Exception("Could not set blob")
+
+ with alloc_fail(dev[0], 1, "eap_fast_add_pac_data"):
+ for i in range(3):
+ params = int_eap_server_params()
+ params['ssid'] = "test-wpa2-eap-2"
+ params['pac_opaque_encr_key'] = "000102030405060708090a0b0c0dff%02x" % i
+ params['eap_fast_a_id'] = "101112131415161718191a1b1c1dff%02x" % i
+ params['eap_fast_a_id_info'] = "test server %d" % i
+
+ hapd2 = hostapd.add_ap(apdev[1], params)
+
+ dev[0].connect("test-wpa2-eap-2", key_mgmt="WPA-EAP", eap="FAST",
+ identity="user", anonymous_identity="FAST",
+ password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1",
+ pac_file="blob://fast_pac_text_errors",
+ scan_freq="2412", wait_connect=False)
+ dev[0].wait_connected()
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ hapd2.disable()
+
+def test_ap_wpa2_eap_fast_pac_truncate(dev, apdev):
+ """EAP-FAST and PAC list truncation"""
+ check_eap_capa(dev[0], "FAST")
+ if "OK" not in dev[0].request("SET blob fast_pac_truncate "):
+ raise Exception("Could not set blob")
+ for i in range(5):
+ params = int_eap_server_params()
+ params['pac_opaque_encr_key'] = "000102030405060708090a0b0c0dff%02x" % i
+ params['eap_fast_a_id'] = "101112131415161718191a1b1c1dff%02x" % i
+ params['eap_fast_a_id_info'] = "test server %d" % i
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
+ identity="user", anonymous_identity="FAST",
+ password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1 fast_max_pac_list_len=2",
+ pac_file="blob://fast_pac_truncate",
+ scan_freq="2412", wait_connect=False)
+ dev[0].wait_connected()
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ hapd.disable()
+
+def test_ap_wpa2_eap_fast_pac_refresh(dev, apdev):
+ """EAP-FAST and PAC refresh"""
+ check_eap_capa(dev[0], "FAST")
+ if "OK" not in dev[0].request("SET blob fast_pac_refresh "):
+ raise Exception("Could not set blob")
+ for i in range(2):
+ params = int_eap_server_params()
+ params['pac_opaque_encr_key'] = "000102030405060708090a0b0c0dff%02x" % i
+ params['eap_fast_a_id'] = "101112131415161718191a1b1c1dff%02x" % i
+ params['eap_fast_a_id_info'] = "test server %d" % i
+ params['pac_key_refresh_time'] = "1"
+ params['pac_key_lifetime'] = "10"
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
+ identity="user", anonymous_identity="FAST",
+ password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1",
+ pac_file="blob://fast_pac_refresh",
+ scan_freq="2412", wait_connect=False)
+ dev[0].wait_connected()
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ hapd.disable()
+
+ for i in range(2):
+ params = int_eap_server_params()
+ params['pac_opaque_encr_key'] = "000102030405060708090a0b0c0dff%02x" % i
+ params['eap_fast_a_id'] = "101112131415161718191a1b1c1dff%02x" % i
+ params['eap_fast_a_id_info'] = "test server %d" % i
+ params['pac_key_refresh_time'] = "10"
+ params['pac_key_lifetime'] = "10"
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
+ identity="user", anonymous_identity="FAST",
+ password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1",
+ pac_file="blob://fast_pac_refresh",
+ scan_freq="2412", wait_connect=False)
+ dev[0].wait_connected()
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ hapd.disable()
+
+def test_ap_wpa2_eap_fast_pac_lifetime(dev, apdev):
+ """EAP-FAST and PAC lifetime"""
+ check_eap_capa(dev[0], "FAST")
+ if "OK" not in dev[0].request("SET blob fast_pac_refresh "):
+ raise Exception("Could not set blob")
+
+ i = 0
+ params = int_eap_server_params()
+ params['pac_opaque_encr_key'] = "000102030405060708090a0b0c0dff%02x" % i
+ params['eap_fast_a_id'] = "101112131415161718191a1b1c1dff%02x" % i
+ params['eap_fast_a_id_info'] = "test server %d" % i
+ params['pac_key_refresh_time'] = "0"
+ params['pac_key_lifetime'] = "2"
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
+ identity="user", anonymous_identity="FAST",
+ password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=2",
+ pac_file="blob://fast_pac_refresh",
+ scan_freq="2412", wait_connect=False)
+ dev[0].wait_connected()
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+ time.sleep(3)
+ dev[0].request("PMKSA_FLUSH")
+ dev[0].request("RECONNECT")
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
+ if ev is None:
+ raise Exception("No EAP-Failure seen after expired PAC")
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+ dev[0].select_network(id)
+ dev[0].wait_connected()
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
def test_ap_wpa2_eap_fast_gtc_auth_prov(dev, apdev):
"""WPA2-Enterprise connection using EAP-FAST/GTC and authenticated provisioning"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "FAST", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=GTC",
phase1="fast_provisioning=2", pac_file="blob://fast_pac_auth")
"""WPA2-Enterprise connection using EAP-FAST/GTC and identity changing"""
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- id = eap_connect(dev[0], apdev[0], "FAST", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ id = eap_connect(dev[0], hapd, "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=GTC",
phase1="fast_provisioning=2",
check_eap_capa(dev[0], "FAST")
tls = dev[0].request("GET tls_library")
if tls.startswith("OpenSSL"):
- func = "openssl_tls_prf"
+ func = "tls_connection_get_eap_fast_key"
count = 2
elif tls.startswith("internal"):
func = "tls_connection_prf"
else:
raise HwsimSkip("Unsupported TLS library")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
identity="user", anonymous_identity="FAST",
params['pac_opaque_encr_key'] = '000102030405060708090a0b0c0d0e0f'
params['eap_fast_a_id'] = '1011'
params['eap_fast_a_id_info'] = 'another test server'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
with alloc_fail(hapd, 1, "tls_session_ticket_ext_cb"):
- id = eap_connect(dev[0], apdev[0], "FAST", "user",
+ id = eap_connect(dev[0], hapd, "FAST", "user",
anonymous_identity="FAST", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
phase1="fast_provisioning=1",
dev[0].select_network(id, freq="2412")
+def test_ap_wpa2_eap_fast_cipher_suites(dev, apdev):
+ """EAP-FAST and different TLS cipher suites"""
+ check_eap_capa(dev[0], "FAST")
+ tls = dev[0].request("GET tls_library")
+ if not tls.startswith("OpenSSL"):
+ raise HwsimSkip("TLS library is not OpenSSL: " + tls)
+
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ dev[0].request("SET blob fast_pac_ciphers ")
+ eap_connect(dev[0], hapd, "FAST", "user",
+ anonymous_identity="FAST", password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=GTC",
+ phase1="fast_provisioning=2",
+ pac_file="blob://fast_pac_ciphers")
+ res = dev[0].get_status_field('EAP TLS cipher')
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+ if res != "DHE-RSA-AES256-SHA":
+ raise Exception("Unexpected cipher suite for provisioning: " + res)
+
+ tests = [ "DHE-RSA-AES128-SHA",
+ "RC4-SHA",
+ "AES128-SHA",
+ "AES256-SHA",
+ "DHE-RSA-AES256-SHA" ]
+ for cipher in tests:
+ dev[0].dump_monitor()
+ logger.info("Testing " + cipher)
+ try:
+ eap_connect(dev[0], hapd, "FAST", "user",
+ openssl_ciphers=cipher,
+ anonymous_identity="FAST", password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=GTC",
+ pac_file="blob://fast_pac_ciphers")
+ except Exception, e:
+ if "Could not select EAP method" in str(e) and cipher == "RC4-SHA":
+ tls = dev[0].request("GET tls_library")
+ if "run=OpenSSL 1.1" in tls:
+ logger.info("Allow failure due to missing TLS library support")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+ continue
+ raise
+ res = dev[0].get_status_field('EAP TLS cipher')
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+ if res != cipher:
+ raise Exception("Unexpected TLS cipher info (configured %s): %s" % (cipher, res))
+
def test_ap_wpa2_eap_tls_ocsp(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and verifying OCSP"""
check_ocsp_support(dev[0])
check_pkcs12_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever", ocsp=2)
check_pkcs12_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
private_key_passwd="whatever", ocsp=2)
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
check_ocsp_support(dev[0])
params = int_eap_server_params()
params["ocsp_stapling_response"] = "auth_serv/ocsp-req.der"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
check_ocsp_support(dev[0])
params = int_eap_server_params()
params["ocsp_stapling_response"] = "auth_serv/ocsp-server-cache.der-invalid"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
check_ocsp_support(dev[0])
params = int_eap_server_params()
params["ocsp_stapling_response"] = "auth_serv/ocsp-server-cache.der-unknown-sign"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", ca_cert="auth_serv/ca.pem",
anonymous_identity="ttls", password="password",
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", ca_cert="auth_serv/ca.pem",
anonymous_identity="ttls", password="password",
raise HwsimSkip("No OCSP response available")
params = int_eap_server_params()
params["ocsp_stapling_response"] = ocsp
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="pap user", ca_cert="auth_serv/ca.pem",
anonymous_identity="ttls", password="password",
params["ca_cert"] = "auth_serv/iCA-server/ca-and-root.pem"
params["server_cert"] = "auth_serv/iCA-server/server.pem"
params["private_key"] = "auth_serv/iCA-server/server.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user",
ca_cert="auth_serv/iCA-user/ca-and-root.pem",
fd, fn = tempfile.mkstemp()
os.close(fd)
- arg = [ "openssl", "ocsp", "-index", "rootCA/index.txt",
- "-rsigner", ca, "-rkey", "auth_serv/caa-key.pem",
+ arg = [ "openssl", "ocsp", "-index", "auth_serv/rootCA/index.txt",
+ "-rsigner", ca, "-rkey", "auth_serv/ca-key.pem",
"-CA", ca, "-issuer", ca, "-verify_other", ca, "-trust_other",
"-ndays", "7", "-reqin", fn2, "-resp_no_certs", "-respout", fn,
"-text" ]
fn = ica_ocsp("server.pem")
params["ocsp_stapling_response"] = fn
try:
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user",
ca_cert="auth_serv/iCA-user/ca-and-root.pem",
fn = ica_ocsp("server-revoked.pem")
params["ocsp_stapling_response"] = fn
try:
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user",
ca_cert="auth_serv/iCA-user/ca-and-root.pem",
fn = ica_ocsp("server.pem")
params["ocsp_stapling_response"] = fn
try:
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user",
ca_cert="auth_serv/iCA-user/ca-and-root.pem",
params["ocsp_stapling_response_multi"] = fn3
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user",
ca_cert="auth_serv/iCA-user/ca-and-root.pem",
client_cert="auth_serv/iCA-user/user.pem",
private_key="auth_serv/iCA-user/user.key",
- scan_freq="2412", ocsp=3, wait_connect=False)
- count = 0
- while True:
- ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS",
- "CTRL-EVENT-EAP-SUCCESS"])
- if ev is None:
- raise Exception("Timeout on EAP status")
- if "CTRL-EVENT-EAP-SUCCESS" in ev:
- raise Exception("Unexpected EAP-Success")
- if 'bad certificate status response' in ev:
- break
- if 'certificate revoked' in ev:
- break
- count = count + 1
- if count > 10:
- raise Exception("Unexpected number of EAP status messages")
-
- ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
- if ev is None:
- raise Exception("Timeout on EAP failure report")
+ scan_freq="2412", ocsp=3)
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
finally:
params = int_eap_server_params()
params["ocsp_stapling_response_multi"] = fn
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user", ca_cert="auth_serv/ca.pem",
private_key="auth_serv/user.pkcs12",
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-expired.pem"
params["private_key"] = "auth_serv/server-expired.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-expired.pem"
params["private_key"] = "auth_serv/server-expired.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-long-duration.pem"
params["private_key"] = "auth_serv/server-long-duration.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-eku-client.pem"
params["private_key"] = "auth_serv/server-eku-client.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-eku-client-server.pem"
params["private_key"] = "auth_serv/server-eku-client-server.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
params = int_eap_server_params()
del params["server_cert"]
params["private_key"] = "auth_serv/server.pkcs12"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
+ identity="mschap user", password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
+ scan_freq="2412")
+
+def test_ap_wpa2_eap_ttls_server_pkcs12_extra(dev, apdev):
+ """EAP-TTLS and server PKCS#12 file with extra certs"""
+ skip_with_fips(dev[0])
+ params = int_eap_server_params()
+ del params["server_cert"]
+ params["private_key"] = "auth_serv/server-extra.pkcs12"
+ params["private_key_passwd"] = "whatever"
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
def test_ap_wpa2_eap_ttls_dh_params(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/CHAP and setting DH params"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=PAP",
dh_file="auth_serv/dh.conf")
"""WPA2-Enterprise connection using EAP-TTLS and setting DH params (DSA)"""
check_dh_dsa_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=PAP",
dh_file="auth_serv/dsaparam.pem")
"""EAP-TTLS and DH params file not found"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
"""EAP-TTLS and invalid DH params file"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="mschap user", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
def test_ap_wpa2_eap_ttls_dh_params_blob(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/CHAP and setting DH params from blob"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dh = read_pem("auth_serv/dh2.conf")
if "OK" not in dev[0].request("SET blob dhparams " + dh.encode("hex")):
raise Exception("Could not set dhparams blob")
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=PAP",
dh_file="blob://dhparams")
"""WPA2-Enterprise using EAP-TTLS and alternative server dhparams"""
params = int_eap_server_params()
params["dh_file"] = "auth_serv/dh2.conf"
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=PAP")
"""WPA2-Enterprise using EAP-TTLS and alternative server dhparams (DSA)"""
params = int_eap_server_params()
params["dh_file"] = "auth_serv/dsaparam.pem"
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=PAP")
"""EAP-TLS server and dhparams file not found"""
params = int_eap_server_params()
params["dh_file"] = "auth_serv/dh-no-such-file.conf"
- hapd = hostapd.add_ap(apdev[0]['ifname'], params, no_enable=True)
+ hapd = hostapd.add_ap(apdev[0], params, no_enable=True)
if "FAIL" not in hapd.request("ENABLE"):
raise Exception("Invalid configuration accepted")
"""EAP-TLS server and invalid dhparams file"""
params = int_eap_server_params()
params["dh_file"] = "auth_serv/ca.pem"
- hapd = hostapd.add_ap(apdev[0]['ifname'], params, no_enable=True)
+ hapd = hostapd.add_ap(apdev[0], params, no_enable=True)
if "FAIL" not in hapd.request("ENABLE"):
raise Exception("Invalid configuration accepted")
"""WPA2-Enterprise and Authenticator forcing reauthentication"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['eap_reauth_period'] = '2'
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PAX", "pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef")
logger.info("Wait for reauthentication")
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
"""Optional displayable message in EAP Request-Identity"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['eap_message'] = 'hello\\0networkid=netw,nasid=foo,portid=0,NAIRealms=example.com'
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PAX", "pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef")
def test_ap_wpa2_eap_sim_aka_result_ind(dev, apdev):
params = int_eap_server_params()
params['eap_sim_db'] = "unix:/tmp/hlr_auc_gw.sock"
params['eap_sim_aka_result_ind'] = "1"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
- eap_connect(dev[0], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[0], hapd, "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
phase1="result_ind=1")
eap_reauth(dev[0], "SIM")
- eap_connect(dev[1], apdev[0], "SIM", "1232010000000000",
+ eap_connect(dev[1], hapd, "SIM", "1232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581")
dev[0].request("REMOVE_NETWORK all")
dev[1].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[0], hapd, "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123",
phase1="result_ind=1")
eap_reauth(dev[0], "AKA")
- eap_connect(dev[1], apdev[0], "AKA", "0232010000000000",
+ eap_connect(dev[1], hapd, "AKA", "0232010000000000",
password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123")
dev[0].request("REMOVE_NETWORK all")
dev[1].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "AKA'", "6555444333222111",
+ eap_connect(dev[0], hapd, "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123",
phase1="result_ind=1")
eap_reauth(dev[0], "AKA'")
- eap_connect(dev[1], apdev[0], "AKA'", "6555444333222111",
+ eap_connect(dev[1], hapd, "AKA'", "6555444333222111",
password="5122250214c33e723a5dd523fc145fc0:981d464c7c52eb6e5036234984ad0bcf:000000000123")
def test_ap_wpa2_eap_too_many_roundtrips(dev, apdev):
"""WPA2-Enterprise connection resulting in too many EAP roundtrips"""
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="TTLS", identity="mschap user",
wait_connect=False, scan_freq="2412", ieee80211w="1",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
- fragment_size="10")
- ev = dev[0].wait_event(["EAP: more than"], timeout=20)
- if ev is None:
+ fragment_size="8")
+ ev = dev[0].wait_event(["EAP: more than",
+ "CTRL-EVENT-EAP-SUCCESS"], timeout=20)
+ if ev is None or "EAP: more than" not in ev:
raise Exception("EAP roundtrip limit not reached")
def test_ap_wpa2_eap_expanded_nak(dev, apdev):
"""WPA2-Enterprise connection with EAP resulting in expanded NAK"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
eap="PSK", identity="vendor-test",
password_hex="ff23456789abcdef0123456789abcdef",
found = False
for i in range(0, 5):
- ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"], timeout=10)
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
if "refuse proposed method" in ev:
try:
params = int_eap_server_params()
params["eap_user_file"] = "sqlite:" + dbfile
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "user-mschapv2",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "user-mschapv2",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
dev[0].request("REMOVE_NETWORK all")
- eap_connect(dev[1], apdev[0], "TTLS", "user-mschap",
+ eap_connect(dev[1], hapd, "TTLS", "user-mschap",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP")
dev[1].request("REMOVE_NETWORK all")
- eap_connect(dev[0], apdev[0], "TTLS", "user-chap",
+ eap_connect(dev[0], hapd, "TTLS", "user-chap",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=CHAP")
- eap_connect(dev[1], apdev[0], "TTLS", "user-pap",
+ eap_connect(dev[1], hapd, "TTLS", "user-pap",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
finally:
def test_ap_wpa2_eap_non_ascii_identity(dev, apdev):
"""WPA2-Enterprise connection attempt using non-ASCII identity"""
params = int_eap_server_params()
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="\x80", password="password", wait_connect=False)
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="a\x80", password="password", wait_connect=False)
for i in range(0, 2):
- ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
+ ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[i].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10)
def test_ap_wpa2_eap_non_ascii_identity2(dev, apdev):
"""WPA2-Enterprise connection attempt using non-ASCII identity"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="\x80", password="password", wait_connect=False)
dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="a\x80", password="password", wait_connect=False)
for i in range(0, 2):
- ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=10)
+ ev = dev[i].wait_event(["CTRL-EVENT-EAP-STARTED"], timeout=16)
if ev is None:
raise Exception("Association and EAP start timed out")
ev = dev[i].wait_event(["CTRL-EVENT-EAP-METHOD"], timeout=10)
if not tls.startswith("OpenSSL"):
raise HwsimSkip("TLS library is not OpenSSL: " + tls)
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
openssl_ciphers="AES128",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
- eap_connect(dev[1], apdev[0], "TTLS", "pap user",
+ eap_connect(dev[1], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
openssl_ciphers="EXPORT",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
raise HwsimSkip("wpa_supplicant TLS library is not OpenSSL: " + tls)
params = int_eap_server_params()
params['openssl_ciphers'] = "AES256"
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
tls = hapd.request("GET tls_library")
if not tls.startswith("OpenSSL"):
raise HwsimSkip("hostapd TLS library is not OpenSSL: " + tls)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
- eap_connect(dev[1], apdev[0], "TTLS", "pap user",
+ eap_connect(dev[1], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
openssl_ciphers="AES128",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
expect_failure=True)
- eap_connect(dev[2], apdev[0], "TTLS", "pap user",
+ eap_connect(dev[2], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
openssl_ciphers="HIGH:!ADH",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
params['openssl_ciphers'] = "FOO"
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], params, no_enable=True)
+ hapd2 = hostapd.add_ap(apdev[1], params, no_enable=True)
if "FAIL" not in hapd2.request("ENABLE"):
raise Exception("Invalid openssl_ciphers value accepted")
def test_wpa2_eap_ttls_pap_key_lifetime_in_memory(dev, apdev, params):
"""Key lifetime in memory with WPA2-Enterprise using EAP-TTLS/PAP"""
p = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], p)
+ hapd = hostapd.add_ap(apdev[0], p)
password = "63d2d21ac3c09ed567ee004a34490f1d16e7fa5835edf17ddba70a63f1a90a25"
pid = find_wpas_process(dev[0])
- id = eap_connect(dev[0], apdev[0], "TTLS", "pap-secret",
+ id = eap_connect(dev[0], hapd, "TTLS", "pap-secret",
anonymous_identity="ttls", password=password,
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
# The decrypted copy of GTK is freed only after the CTRL-EVENT-CONNECTED
def test_ap_wpa2_eap_unexpected_wep_eapol_key(dev, apdev):
"""WPA2-Enterprise connection and unexpected WEP EAPOL-Key"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP")
def _test_ap_wpa2_eap_in_bridge(dev, apdev):
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
br_ifname='sta-br0'
ifname='wlan5'
wpas.interface_add(ifname, br_ifname=br_ifname)
wpas.dump_monitor()
- id = eap_connect(wpas, apdev[0], "PAX", "pax.user@example.com",
+ id = eap_connect(wpas, hapd, "PAX", "pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef")
wpas.dump_monitor()
eap_reauth(wpas, "PAX")
def test_ap_wpa2_eap_session_ticket(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS and TLS session ticket enabled"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
key_mgmt = hapd.get_config()['key_mgmt']
if key_mgmt.split(' ')[0] != "WPA-EAP":
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem",
phase1="tls_disable_session_ticket=0", phase2="auth=PAP")
def test_ap_wpa2_eap_no_workaround(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS and eap_workaround=0"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
key_mgmt = hapd.get_config()['key_mgmt']
if key_mgmt.split(' ')[0] != "WPA-EAP":
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", eap_workaround='0',
phase2="auth=PAP")
"""EAP-TLS and server checking CRL"""
params = int_eap_server_params()
params['check_crl'] = '1'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
# check_crl=1 and no CRL available --> reject connection
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key", expect_failure=True)
dev[0].request("REMOVE_NETWORK all")
hapd.enable()
# check_crl=1 and valid CRL --> accept
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
dev[0].request("REMOVE_NETWORK all")
hapd.enable()
# check_crl=2 and valid CRL --> accept
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
dev[0].request("REMOVE_NETWORK all")
check_domain_match_full(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
tests = [ (1, "tls_connection_set_subject_match"),
(2, "tls_connection_set_subject_match"),
"""WPA2-Enterprise connection using MAC ACL"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params["macaddr_acl"] = "2"
- hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[1], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[1], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
def test_ap_wpa2_eap_oom(dev, apdev):
"""EAP server and OOM"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
with alloc_fail(hapd, 1, "eapol_auth_alloc"):
private_key="auth_serv/user.key",
scan_freq="2412")
-def check_tls_ver(dev, ap, phase1, expected):
- eap_connect(dev, ap, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+def check_tls_ver(dev, hapd, phase1, expected):
+ eap_connect(dev, hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key",
phase1=phase1)
def test_ap_wpa2_eap_tls_versions(dev, apdev):
"""EAP-TLS and TLS version configuration"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
tls = dev[0].request("GET tls_library")
if tls.startswith("OpenSSL"):
if "build=OpenSSL 1.0.2" in tls and "run=OpenSSL 1.0.2" in tls:
- check_tls_ver(dev[0], apdev[0],
+ check_tls_ver(dev[0], hapd,
"tls_disable_tlsv1_0=1 tls_disable_tlsv1_1=1",
"TLSv1.2")
elif tls.startswith("internal"):
- check_tls_ver(dev[0], apdev[0],
+ check_tls_ver(dev[0], hapd,
"tls_disable_tlsv1_0=1 tls_disable_tlsv1_1=1", "TLSv1.2")
- check_tls_ver(dev[1], apdev[0],
+ check_tls_ver(dev[1], hapd,
"tls_disable_tlsv1_0=1 tls_disable_tlsv1_2=1", "TLSv1.1")
- check_tls_ver(dev[2], apdev[0],
+ check_tls_ver(dev[2], hapd,
"tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1", "TLSv1")
def test_rsn_ie_proto_eap_sta(dev, apdev):
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
# This is the RSN element used normally by hostapd
params['own_ie_override'] = '30140100000fac040100000fac040100000fac010c00'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="GPSK",
identity="gpsk user",
password="abcdefghijklmnop0123456789abcdef",
dev[0].select_network(id, freq=2412)
dev[0].wait_connected()
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+ dev[0].flush_scan_cache()
+
def check_tls_session_resumption_capa(dev, hapd):
tls = hapd.request("GET tls_library")
if not tls.startswith("OpenSSL"):
"""EAP-TTLS/PAP session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
check_tls_session_resumption_capa(dev[0], hapd)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", eap_workaround='0',
phase2="auth=PAP")
"""EAP-TTLS/CHAP session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
check_tls_session_resumption_capa(dev[0], hapd)
- eap_connect(dev[0], apdev[0], "TTLS", "chap user",
+ eap_connect(dev[0], hapd, "TTLS", "chap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.der", phase2="auth=CHAP")
if dev[0].get_status_field("tls_session_reused") != '0':
check_domain_suffix_match(dev[0])
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
check_tls_session_resumption_capa(dev[0], hapd)
- eap_connect(dev[0], apdev[0], "TTLS", "mschap user",
+ eap_connect(dev[0], hapd, "TTLS", "mschap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAP",
domain_suffix_match="server.w1.fi")
check_eap_capa(dev[0], "MSCHAPV2")
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
check_tls_session_resumption_capa(dev[0], hapd)
- eap_connect(dev[0], apdev[0], "TTLS", "DOMAIN\mschapv2 user",
+ eap_connect(dev[0], hapd, "TTLS", "DOMAIN\mschapv2 user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
domain_suffix_match="server.w1.fi")
"""EAP-TTLS/EAP-GTC session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
check_tls_session_resumption_capa(dev[0], hapd)
- eap_connect(dev[0], apdev[0], "TTLS", "user",
+ eap_connect(dev[0], hapd, "TTLS", "user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", phase2="autheap=GTC")
if dev[0].get_status_field("tls_session_reused") != '0':
"""EAP-TTLS session resumption disabled on server"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '0'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TTLS", "pap user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TTLS", "pap user",
anonymous_identity="ttls", password="password",
ca_cert="auth_serv/ca.pem", eap_workaround='0',
phase2="auth=PAP")
"""EAP-PEAP session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
check_tls_session_resumption_capa(dev[0], hapd)
- eap_connect(dev[0], apdev[0], "PEAP", "user",
+ eap_connect(dev[0], hapd, "PEAP", "user",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
if dev[0].get_status_field("tls_session_reused") != '0':
"""EAP-PEAP session resumption with crypto binding"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
check_tls_session_resumption_capa(dev[0], hapd)
- eap_connect(dev[0], apdev[0], "PEAP", "user",
+ eap_connect(dev[0], hapd, "PEAP", "user",
anonymous_identity="peap", password="password",
phase1="peapver=0 crypto_binding=2",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
def test_eap_peap_no_session_resumption(dev, apdev):
"""EAP-PEAP session resumption disabled on server"""
params = int_eap_server_params()
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "PEAP", "user",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "PEAP", "user",
anonymous_identity="peap", password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
if dev[0].get_status_field("tls_session_reused") != '0':
"""EAP-TLS session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
check_tls_session_resumption_capa(dev[0], hapd)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
if dev[0].get_status_field("tls_session_reused") != '0':
"""EAP-TLS session resumption"""
params = int_eap_server_params()
params['tls_session_lifetime'] = '1'
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
check_tls_session_resumption_capa(dev[0], hapd)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
if dev[0].get_status_field("tls_session_reused") != '0':
def test_eap_tls_no_session_resumption(dev, apdev):
"""EAP-TLS session resumption disabled on server"""
params = int_eap_server_params()
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
if dev[0].get_status_field("tls_session_reused") != '0':
"server_cert": "auth_serv/server.pem",
"private_key": "auth_serv/server.key",
"tls_session_lifetime": "60" }
- authsrv = hostapd.add_ap(apdev[1]['ifname'], params)
+ authsrv = hostapd.add_ap(apdev[1], params)
check_tls_session_resumption_capa(dev[0], authsrv)
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "18128"
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
if dev[0].get_status_field("tls_session_reused") != '0':
"server_cert": "auth_serv/server.pem",
"private_key": "auth_serv/server.key",
"tls_session_lifetime": "0" }
- hostapd.add_ap(apdev[1]['ifname'], params)
+ hostapd.add_ap(apdev[1], params)
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['auth_server_port'] = "18128"
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ hapd = hostapd.add_ap(apdev[0], params)
+ eap_connect(dev[0], hapd, "TLS", "tls user", ca_cert="auth_serv/ca.pem",
client_cert="auth_serv/user.pem",
private_key="auth_serv/user.key")
if dev[0].get_status_field("tls_session_reused") != '0':
check_eap_capa(dev[0], "FAST")
params = hostapd.wpa2_eap_params(ssid="test-wpa-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="MSCHAPV2",
identity="phase1-user", password="password",
scan_freq="2412")
def test_eap_gpsk_errors(dev, apdev):
"""EAP-GPSK error cases"""
params = hostapd.wpa2_eap_params(ssid="test-wpa-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="GPSK",
identity="gpsk user",
password="abcdefghijklmnop0123456789abcdef",
pass
hparams = int_eap_server_params()
hparams['eap_sim_db'] = 'unix:' + sockpath
- hapd = hostapd.add_ap(apdev[0]['ifname'], hparams)
+ hapd = hostapd.add_ap(apdev[0], hparams)
# Initial test with hlr_auc_gw socket not available
id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
params["ca_cert"] = "auth_serv/sha512-ca.pem"
params["server_cert"] = "auth_serv/sha512-server.pem"
params["private_key"] = "auth_serv/sha512-server.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user sha512",
params["ca_cert"] = "auth_serv/sha512-ca.pem"
params["server_cert"] = "auth_serv/sha384-server.pem"
params["private_key"] = "auth_serv/sha384-server.key"
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
identity="tls user sha512",
def test_ap_wpa2_eap_assoc_rsn(dev, apdev):
"""WPA2-Enterprise AP and association request RSN IE differences"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hostapd.add_ap(apdev[0]['ifname'], params)
+ hostapd.add_ap(apdev[0], params)
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap-11w")
params["ieee80211w"] = "2"
- hostapd.add_ap(apdev[1]['ifname'], params)
+ hostapd.add_ap(apdev[1], params)
# Success cases with optional RSN IE fields removed one by one
tests = [ ("Normal wpa_supplicant assoc req RSN IE",
raise HwsimSkip("OpenSSL python method not available")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].select_network(net_id)
certs = {}
raise Exception("EAP-Failure not reported")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
+
+def test_eap_tls_errors(dev, apdev):
+ """EAP-TLS error cases"""
+ params = int_eap_server_params()
+ params['fragment_size'] = '100'
+ hostapd.add_ap(apdev[0], params)
+ with alloc_fail(dev[0], 1,
+ "eap_peer_tls_reassemble_fragment"):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user", ca_cert="auth_serv/ca.pem",
+ client_cert="auth_serv/user.pem",
+ private_key="auth_serv/user.key",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ with alloc_fail(dev[0], 1, "eap_tls_init"):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user", ca_cert="auth_serv/ca.pem",
+ client_cert="auth_serv/user.pem",
+ private_key="auth_serv/user.key",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ with alloc_fail(dev[0], 1, "eap_peer_tls_ssl_init"):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user", ca_cert="auth_serv/ca.pem",
+ client_cert="auth_serv/user.pem",
+ private_key="auth_serv/user.key",
+ engine="1",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ ev = dev[0].wait_event(["CTRL-REQ-PIN"], timeout=5)
+ if ev is None:
+ raise Exception("No CTRL-REQ-PIN seen")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ tests = [ "eap_peer_tls_derive_key;eap_tls_success",
+ "eap_peer_tls_derive_session_id;eap_tls_success",
+ "eap_tls_getKey",
+ "eap_tls_get_emsk",
+ "eap_tls_get_session_id" ]
+ for func in tests:
+ with alloc_fail(dev[0], 1, func):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user", ca_cert="auth_serv/ca.pem",
+ client_cert="auth_serv/user.pem",
+ private_key="auth_serv/user.key",
+ erp="1",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ with alloc_fail(dev[0], 1, "eap_unauth_tls_init"):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="UNAUTH-TLS",
+ identity="unauth-tls", ca_cert="auth_serv/ca.pem",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ with alloc_fail(dev[0], 1, "eap_peer_tls_ssl_init;eap_unauth_tls_init"):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="UNAUTH-TLS",
+ identity="unauth-tls", ca_cert="auth_serv/ca.pem",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ with alloc_fail(dev[0], 1, "eap_wfa_unauth_tls_init"):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
+ eap="WFA-UNAUTH-TLS",
+ identity="osen@example.com", ca_cert="auth_serv/ca.pem",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ with alloc_fail(dev[0], 1, "eap_peer_tls_ssl_init;eap_wfa_unauth_tls_init"):
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
+ eap="WFA-UNAUTH-TLS",
+ identity="osen@example.com", ca_cert="auth_serv/ca.pem",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+def test_ap_wpa2_eap_status(dev, apdev):
+ """EAP state machine status information"""
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0], params)
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="PEAP",
+ identity="cert user",
+ ca_cert="auth_serv/ca.pem", phase2="auth=TLS",
+ ca_cert2="auth_serv/ca.pem",
+ client_cert2="auth_serv/user.pem",
+ private_key2="auth_serv/user.key",
+ scan_freq="2412", wait_connect=False)
+ success = False
+ states = []
+ method_states = []
+ decisions = []
+ req_methods = []
+ selected_methods = []
+ for i in range(100000):
+ s = dev[0].get_status(extra="VERBOSE")
+ if 'EAP state' in s:
+ state = s['EAP state']
+ if state:
+ if state not in states:
+ states.append(state)
+ if state == "SUCCESS":
+ success = True
+ break
+ if 'methodState' in s:
+ val = s['methodState']
+ if val not in method_states:
+ method_states.append(val)
+ if 'decision' in s:
+ val = s['decision']
+ if val not in decisions:
+ decisions.append(val)
+ if 'reqMethod' in s:
+ val = s['reqMethod']
+ if val not in req_methods:
+ req_methods.append(val)
+ if 'selectedMethod' in s:
+ val = s['selectedMethod']
+ if val not in selected_methods:
+ selected_methods.append(val)
+ logger.info("Iterations: %d" % i)
+ logger.info("EAP states: " + str(states))
+ logger.info("methodStates: " + str(method_states))
+ logger.info("decisions: " + str(decisions))
+ logger.info("reqMethods: " + str(req_methods))
+ logger.info("selectedMethods: " + str(selected_methods))
+ if not success:
+ raise Exception("EAP did not succeed")
+ dev[0].wait_connected()
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+def test_ap_wpa2_eap_gpsk_ptk_rekey_ap(dev, apdev):
+ """WPA2-Enterprise with EAP-GPSK and PTK rekey enforced by AP"""
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ params['wpa_ptk_rekey'] = '2'
+ hapd = hostapd.add_ap(apdev[0], params)
+ id = eap_connect(dev[0], hapd, "GPSK", "gpsk user",
+ password="abcdefghijklmnop0123456789abcdef")
+ ev = dev[0].wait_event(["WPA: Key negotiation completed"])
+ if ev is None:
+ raise Exception("PTK rekey timed out")
+ hwsim_utils.test_connectivity(dev[0], hapd)
+
+def test_ap_wpa2_eap_wildcard_ssid(dev, apdev):
+ """WPA2-Enterprise connection using EAP-GPSK and wildcard SSID"""
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hapd = hostapd.add_ap(apdev[0], params)
+ dev[0].connect(bssid=apdev[0]['bssid'], key_mgmt="WPA-EAP", eap="GPSK",
+ identity="gpsk user",
+ password="abcdefghijklmnop0123456789abcdef",
+ scan_freq="2412")
projects / mech_eap.git / blobdiff