ChangeLog for wpa_supplicant
+????-??-?? - v2.6
+ * fixed WNM Sleep Mode processing when PMF is not enabled
+ [http://w1.fi/security/2015-6/] (CVE-2015-5310)
+ * fixed EAP-pwd last fragment validation
+ [http://w1.fi/security/2015-7/] (CVE-2015-5315)
+ * fixed EAP-pwd unexpected Confirm message processing
+ [http://w1.fi/security/2015-8/] (CVE-2015-5316)
+ * fixed WPS configuration update vulnerability with malformed passphrase
+ [http://w1.fi/security/2016-1/] (CVE-2016-4476)
+ * fixed configuration update vulnerability with malformed parameters set
+ over the local control interface
+ [http://w1.fi/security/2016-1/] (CVE-2016-4477)
+ * fixed TK configuration to the driver in EAPOL-Key 3/4 retry case
+ * extended channel switch support for P2P GO
+ * started to throttle control interface event message bursts to avoid
+ issues with monitor sockets running out of buffer space
+ * mesh mode fixes/improvements
+ - generate proper AID for peer
+ - enable WMM by default
+ - add VHT support
+ - fix PMKID derivation
+ - improve robustness on various exchanges
+ - fix peer link counting in reconnect case
+ - add MESH_PEER_ADD and MESH_PEER_REMOVE commands
+ - add support for PMKSA caching
+ * fixed PMKID derivation with SAE
+ * added support for requesting and fetching arbitrary ANQP-elements
+ without internal support in wpa_supplicant for the specific element
+ (anqp[265]=<hexdump> in "BSS <BSSID>" command output)
+ * P2P
+ - filter control characters in group client device names to be
+ consistent with other P2P peer cases
+ - support VHT 80+80 MHz and 160 MHz
+ - indicate group completion in P2P Client role after data association
+ instead of already after the WPS provisioning step
+ - improve group-join operation to use SSID, if known, to filter BSS
+ entries
+ - added optional ssid=<hexdump> argument to P2P_CONNECT for join case
+ - added P2P_GROUP_MEMBER command to fetch client interface address
+ * P2PS
+ - fix follow-on PD Response behavior
+ - fix PD Response generation for unknown peer
+ - fix persistent group reporting
+ - add channel policy to PD Request
+ - add group SSID to the P2PS-PROV-DONE event
+ - allow "P2P_CONNECT <addr> p2ps" to be used without specifying the
+ default PIN
+ * BoringSSL
+ - support for OCSP stapling
+ - support building of h20-osu-client
+ * D-Bus
+ - add ExpectDisconnect()
+ - add global config parameters as properties
+ - add SaveConfig()
+ - add VendorElemAdd(), VendorElemGet(), VendorElemRem()
+ * fixed Suite B 192-bit AKM to use proper PMK length
+ (note: this makes old releases incompatible with the fixed behavior)
+ * improved PMF behavior for cases where the AP and STA has different
+ configuration by not trying to connect in some corner cases where the
+ connection cannot succeed
+ * added option to reopen debug log (e.g., to rotate the file) upon
+ receipt of SIGHUP signal
+ * EAP-pwd: added support for Brainpool Elliptic Curves
+ (with OpenSSL 1.0.2 and newer)
+ * fixed EAPOL reauthentication after FT protocol run
+ * fixed FTIE generation for 4-way handshake after FT protocol run
+ * extended INTERFACE_ADD command to allow certain type (sta/ap)
+ interface to be created
+ * fixed and improved various FST operations
+ * added 80+80 MHz VHT support for IBSS/mesh
+ * fixed SIGNAL_POLL in IBSS and mesh cases
+ * added an option to abort an ongoing scan (used to speed up connection
+ and can also be done with the new ABORT_SCAN command)
+ * TLS client
+ - do not verify CA certificates when ca_cert is not specified
+ - support validating server certificate hash
+ - support SHA384 and SHA512 hashes
+ - add signature_algorithms extension into ClientHello
+ - support TLS v1.2 signature algorithm with SHA384 and SHA512
+ - support server certificate probing
+ - allow specific TLS versions to be disabled with phase2 parameter
+ - support extKeyUsage
+ - support PKCS #5 v2.0 PBES2
+ - support PKCS #5 with PKCS #12 style key decryption
+ - minimal support for PKCS #12
+ - support OCSP stapling (including ocsp_multi)
+ * OpenSSL
+ - support OpenSSL 1.1 API changes
+ - drop support for OpenSSL 0.9.8
+ - drop support for OpenSSL 1.0.0
+ * added support for multiple schedule scan plans (sched_scan_plans)
+ * added support for external server certificate chain validation
+ (tls_ext_cert_check=1 in the network profile phase1 parameter)
+ * made phase2 parser more strict about correct use of auth=<val> and
+ autheap=<val> values
+ * improved GAS offchannel operations with comeback request
+ * added SIGNAL_MONITOR command to request signal strength monitoring
+ events
+ * added command for retrieving HS 2.0 icons with in-memory storage
+ (REQ_HS20_ICON, GET_HS20_ICON, DEL_HS20_ICON commands and
+ RX-HS20-ICON event)
+ * enabled ACS support for AP mode operations with wpa_supplicant
+ * EAP-PEAP: fixed interoperability issue with Windows 2012r2 server
+ ("Invalid Compound_MAC in cryptobinding TLV")
+ * EAP-TTLS; fixed success after fragmented final Phase 2 message
+ * VHT: added interoperability workaround for 80+80 and 160 MHz channels
+ * WNM: workaround for broken AP operating class behavior
+ * added kqueue(2) support for eloop (CONFIG_ELOOP_KQUEUE)
+ * nl80211:
+ - add support for full station state operations
+ - do not add NL80211_ATTR_SMPS_MODE attribute if HT is disabled
+ - add NL80211_ATTR_PREV_BSSID with Connect command
+ * added initial MBO support; number of extensions to WNM BSS Transition
+ Management
+ * added support for PBSS/PCP and P2P on 60 GHz
+ * Interworking: add credential realm to EAP-TLS identity
+ * fixed EAPOL-Key Request Secure bit to be 1 if PTK is set
+ * HS 2.0: add support for configuring frame filters
+ * added POLL_STA command to check connectivity in AP mode
+ * added initial functionality for location related operations
+ * started to ignore pmf=1/2 parameter for non-RSN networks
+ * added wps_disabled=1 network profile parameter to allow AP mode to
+ be started without enabling WPS
+ * number of small fixes
+
+2015-09-27 - v2.5
+ * fixed P2P validation of SSID element length before copying it
+ [http://w1.fi/security/2015-1/] (CVE-2015-1863)
+ * fixed WPS UPnP vulnerability with HTTP chunked transfer encoding
+ [http://w1.fi/security/2015-2/] (CVE-2015-4141)
+ * fixed WMM Action frame parser (AP mode)
+ [http://w1.fi/security/2015-3/] (CVE-2015-4142)
+ * fixed EAP-pwd peer missing payload length validation
+ [http://w1.fi/security/2015-4/]
+ (CVE-2015-4143, CVE-2015-4144, CVE-2015-4145, CVE-2015-4146)
+ * fixed validation of WPS and P2P NFC NDEF record payload length
+ [http://w1.fi/security/2015-5/]
+ * nl80211:
+ - added VHT configuration for IBSS
+ - fixed vendor command handling to check OUI properly
+ - allow driver-based roaming to change ESS
+ * added AVG_BEACON_RSSI to SIGNAL_POLL output
+ * wpa_cli: added tab completion for number of commands
+ * removed unmaintained and not yet completed SChannel/CryptoAPI support
+ * modified Extended Capabilities element use in Probe Request frames to
+ include all cases if any of the values are non-zero
+ * added support for dynamically creating/removing a virtual interface
+ with interface_add/interface_remove
+ * added support for hashed password (NtHash) in EAP-pwd peer
+ * added support for memory-only PSK/passphrase (mem_only_psk=1 and
+ CTRL-REQ/RSP-PSK_PASSPHRASE)
+ * P2P
+ - optimize scan frequencies list when re-joining a persistent group
+ - fixed number of sequences with nl80211 P2P Device interface
+ - added operating class 125 for P2P use cases (this allows 5 GHz
+ channels 161 and 169 to be used if they are enabled in the current
+ regulatory domain)
+ - number of fixes to P2PS functionality
+ - do not allow 40 MHz co-ex PRI/SEC switch to force MCC
+ - extended support for preferred channel listing
+ * D-Bus:
+ - fixed WPS property of fi.w1.wpa_supplicant1.BSS interface
+ - fixed PresenceRequest to use group interface
+ - added new signals: FindStopped, WPS pbc-overlap,
+ GroupFormationFailure, WPS timeout, InvitationReceived
+ - added new methods: WPS Cancel, P2P Cancel, Reconnect, RemoveClient
+ - added manufacturer info
+ * added EAP-EKE peer support for deriving Session-Id
+ * added wps_priority configuration parameter to set the default priority
+ for all network profiles added by WPS
+ * added support to request a scan with specific SSIDs with the SCAN
+ command (optional "ssid <hexdump>" arguments)
+ * removed support for WEP40/WEP104 as a group cipher with WPA/WPA2
+ * fixed SAE group selection in an error case
+ * modified SAE routines to be more robust and PWE generation to be
+ stronger against timing attacks
+ * added support for Brainpool Elliptic Curves with SAE
+ * added support for CCMP-256 and GCMP-256 as group ciphers with FT
+ * fixed BSS selection based on estimated throughput
+ * added option to disable TLSv1.0 with OpenSSL
+ (phase1="tls_disable_tlsv1_0=1")
+ * added Fast Session Transfer (FST) module
+ * fixed OpenSSL PKCS#12 extra certificate handling
+ * fixed key derivation for Suite B 192-bit AKM (this breaks
+ compatibility with the earlier version)
+ * added RSN IE to Mesh Peering Open/Confirm frames
+ * number of small fixes
+
+2015-03-15 - v2.4
+ * allow OpenSSL cipher configuration to be set for internal EAP server
+ (openssl_ciphers parameter)
+ * fixed number of small issues based on hwsim test case failures and
+ static analyzer reports
+ * P2P:
+ - add new=<0/1> flag to P2P-DEVICE-FOUND events
+ - add passive channels in invitation response from P2P Client
+ - enable nl80211 P2P_DEVICE support by default
+ - fix regresssion in disallow_freq preventing search on social
+ channels
+ - fix regressions in P2P SD query processing
+ - try to re-invite with social operating channel if no common channels
+ in invitation
+ - allow cross connection on parent interface (this fixes number of
+ use cases with nl80211)
+ - add support for P2P services (P2PS)
+ - add p2p_go_ctwindow configuration parameter to allow GO CTWindow to
+ be configured
+ * increase postponing of EAPOL-Start by one second with AP/GO that
+ supports WPS 2.0 (this makes it less likely to trigger extra roundtrip
+ of identity frames)
+ * add support for PMKSA caching with SAE
+ * add support for control mesh BSS (IEEE 802.11s) operations
+ * fixed number of issues with D-Bus P2P commands
+ * fixed regression in ap_scan=2 special case for WPS
+ * fixed macsec_validate configuration
+ * add a workaround for incorrectly behaving APs that try to use
+ EAPOL-Key descriptor version 3 when the station supports PMF even if
+ PMF is not enabled on the AP
+ * allow TLS v1.1 and v1.2 to be negotiated by default; previous behavior
+ of disabling these can be configured to work around issues with broken
+ servers with phase1="tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1"
+ * add support for Suite B (128-bit and 192-bit level) key management and
+ cipher suites
+ * add WMM-AC support (WMM_AC_ADDTS/WMM_AC_DELTS)
+ * improved BSS Transition Management processing
+ * add support for neighbor report
+ * add support for link measurement
+ * fixed expiration of BSS entry with all-zeros BSSID
+ * add optional LAST_ID=x argument to LIST_NETWORK to allow all
+ configured networks to be listed even with huge number of network
+ profiles
+ * add support for EAP Re-Authentication Protocol (ERP)
+ * fixed EAP-IKEv2 fragmentation reassembly
+ * improved PKCS#11 configuration for OpenSSL
+ * set stdout to be line-buffered
+ * add TDLS channel switch configuration
+ * add support for MAC address randomization in scans with nl80211
+ * enable HT for IBSS if supported by the driver
+ * add BSSID black and white lists (bssid_blacklist, bssid_whitelist)
+ * add support for domain_suffix_match with GnuTLS
+ * add OCSP stapling client support with GnuTLS
+ * include peer certificate in EAP events even without a separate probe
+ operation; old behavior can be restored with cert_in_cb=0
+ * add peer ceritficate alt subject name to EAP events
+ (CTRL-EVENT-EAP-PEER-ALT)
+ * add domain_match network profile parameter (similar to
+ domain_suffix_match, but full match is required)
+ * enable AP/GO mode HT Tx STBC automatically based on driver support
+ * add ANQP-QUERY-DONE event to provide information on ANQP parsing
+ status
+ * allow passive scanning to be forced with passive_scan=1
+ * add a workaround for Linux packet socket behavior when interface is in
+ bridge
+ * increase 5 GHz band preference in BSS selection (estimate SNR, if info
+ not available from driver; estimate maximum throughput based on common
+ HT/VHT/specific TX rate support)
+ * add INTERWORKING_ADD_NETWORK ctrl_iface command; this can be used to
+ implement Interworking network selection behavior in upper layers
+ software components
+ * add optional reassoc_same_bss_optim=1 (disabled by default)
+ optimization to avoid unnecessary Authentication frame exchange
+ * extend TDLS frame padding workaround to cover all packets
+ * allow wpa_supplicant to recover nl80211 functionality if the cfg80211
+ module gets removed and reloaded without restarting wpa_supplicant
+ * allow hostapd DFS implementation to be used in wpa_supplicant AP mode
+
+2014-10-09 - v2.3
+ * fixed number of minor issues identified in static analyzer warnings
+ * fixed wfd_dev_info to be more careful and not read beyond the buffer
+ when parsing invalid information for P2P-DEVICE-FOUND
+ * extended P2P and GAS query operations to support drivers that have
+ maximum remain-on-channel time below 1000 ms (500 ms is the current
+ minimum supported value)
+ * added p2p_search_delay parameter to make the default p2p_find delay
+ configurable
+ * improved P2P operating channel selection for various multi-channel
+ concurrency cases
+ * fixed some TDLS failure cases to clean up driver state
+ * fixed dynamic interface addition cases with nl80211 to avoid adding
+ ifindex values to incorrect interface to skip foreign interface events
+ properly
+ * added TDLS workaround for some APs that may add extra data to the
+ end of a short frame
+ * fixed EAP-AKA' message parser with multiple AT_KDF attributes
+ * added configuration option (p2p_passphrase_len) to allow longer
+ passphrases to be generated for P2P groups
+ * fixed IBSS channel configuration in some corner cases
+ * improved HT/VHT/QoS parameter setup for TDLS
+ * modified D-Bus interface for P2P peers/groups
+ * started to use constant time comparison for various password and hash
+ values to reduce possibility of any externally measurable timing
+ differences
+ * extended explicit clearing of freed memory and expired keys to avoid
+ keeping private data in memory longer than necessary
+ * added optional scan_id parameter to the SCAN command to allow manual
+ scan requests for active scans for specific configured SSIDs
+ * fixed CTRL-EVENT-REGDOM-CHANGE event init parameter value
+ * added option to set Hotspot 2.0 Rel 2 update_identifier in network
+ configuration to support external configuration
+ * modified Android PNO functionality to send Probe Request frames only
+ for hidden SSIDs (based on scan_ssid=1)
+ * added generic mechanism for adding vendor elements into frames at
+ runtime (VENDOR_ELEM_ADD, VENDOR_ELEM_GET, VENDOR_ELEM_REMOVE)
+ * added fields to show unrecognized vendor elements in P2P_PEER
+ * removed EAP-TTLS/MSCHAPv2 interoperability workaround so that
+ MS-CHAP2-Success is required to be present regardless of
+ eap_workaround configuration
+ * modified EAP fast session resumption to allow results to be used only
+ with the same network block that generated them
+ * extended freq_list configuration to apply for sched_scan as well as
+ normal scan
+ * modified WPS to merge mixed-WPA/WPA2 credentials from a single session
+ * fixed nl80211/RTM_DELLINK processing when a P2P GO interface is
+ removed from a bridge
+ * fixed number of small P2P issues to make negotiations more robust in
+ corner cases
+ * added experimental support for using temporary, random local MAC
+ address (mac_addr and preassoc_mac_addr parameters); this is disabled
+ by default (i.e., previous behavior of using permanent address is
+ maintained if configuration is not changed)
+ * added D-Bus interface for setting/clearing WFD IEs
+ * fixed TDLS AID configuration for VHT
+ * modified -m<conf> configuration file to be used only for the P2P
+ non-netdev management device and do not load this for the default
+ station interface or load the station interface configuration for
+ the P2P management interface
+ * fixed external MAC address changes while wpa_supplicant is running
+ * started to enable HT (if supported by the driver) for IBSS
+ * fixed wpa_cli action script execution to use more robust mechanism
+ (CVE-2014-3686)
+
2014-06-04 - v2.2
* added DFS indicator to get_capability freq
* added/fixed nl80211 functionality
projects / mech_eap.git / blobdiff