#
# sp_priority: Credential priority within a provisioning SP
# This is the priority of the credential among all credentials
-# provisionined by the same SP (i.e., for entries that have identical
+# provisioned by the same SP (i.e., for entries that have identical
# provisioning_sp value). The range of this priority is 0-255 with 0
# being the highest and 255 the lower priority.
#
<3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
<3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
<3>ANQP fetch completed
+
+
+Hotspot 2.0 Rel 2 online signup and OSEN
+----------------------------------------
+
+Following parameters can be used to create a network profile for
+link-layer protected Hotspot 2.0 online signup connection with
+OSEN. Note that ssid and identify (NAI) values need to be set based on
+the information for the selected provider in the OSU Providers list
+ANQP-element.
+
+network={
+ ssid="HS 2.0 OSU"
+ proto=OSEN
+ key_mgmt=OSEN
+ pairwise=CCMP
+ group=GTK_NOT_USED
+ eap=WFA-UNAUTH-TLS
+ identity="anonymous@example.com"
+ ca_cert="osu-ca.pem"
+ ocsp=2
+}
+
+
+Hotspot 2.0 connection with external network selection
+------------------------------------------------------
+
+When an component controlling wpa_supplicant takes care of Interworking
+network selection, following configuration and network profile
+parameters can be used to configure a temporary network profile for a
+Hotspot 2.0 connection (e.g., with SET, ADD_NETWORK, SET_NETWORK, and
+SELECT_NETWORK control interface commands):
+
+interworking=1
+hs20=1
+auto_interworking=0
+
+network={
+ ssid="test-hs20"
+ proto=RSN
+ key_mgmt=WPA-EAP
+ pairwise=CCMP
+ anonymous_identity="anonymous@example.com"
+ identity="hs20-test@example.com"
+ password="password"
+ ca_cert="ca.pem"
+ eap=TTLS
+ phase2="auth=MSCHAPV2"
+ update_identifier=54321
+ #ocsp=2
+}
+
+
+These parameters are set based on the PPS MO credential and/or NAI Realm
+list ANQP-element:
+
+anonymous_identity: Credential/UsernamePassword/Username with username part
+ replaced with "anonymous"
+identity: Credential/UsernamePassword/Username
+password: Credential/UsernamePassword/Password
+update_identifier: PPS/UpdateIdentifier
+ca_cert: from the downloaded trust root based on PPS information
+eap: Credential/UsernamePassword/EAPMethod or NAI Realm list
+phase2: Credential/UsernamePassword/EAPMethod or NAI Realm list
+ocsp: Credential/CheckAAAServerCertStatus