# If set, this FQDN is used as a suffix match requirement for the AAA
# server certificate in SubjectAltName dNSName element(s). If a
# matching dNSName is found, this constraint is met. If no dNSName
-# values are present, this constraint is matched against SubjetName CN
+# values are present, this constraint is matched against SubjectName CN
# using same suffix match comparison. Suffix match here means that the
# host/domain name is compared one label at a time starting from the
# top-level domain and all the labels in @domain_suffix_match shall be
# update_identifier: PPS MO ID
# (Hotspot 2.0 PerProviderSubscription/UpdateIdentifier)
#
+# provisioning_sp: FQDN of the SP that provisioned the credential
+# This optional field can be used to keep track of the SP that provisioned
+# the credential to find the PPS MO (./Wi-Fi/<provisioning_sp>).
+#
+# sp_priority: Credential priority within a provisioning SP
+# This is the priority of the credential among all credentials
+# provisioned by the same SP (i.e., for entries that have identical
+# provisioning_sp value). The range of this priority is 0-255 with 0
+# being the highest and 255 the lower priority.
+#
+# Minimum backhaul threshold (PPS/<X+>/Policy/MinBackhauldThreshold/*)
+# These fields can be used to specify minimum download/upload backhaul
+# bandwidth that is preferred for the credential. This constraint is
+# ignored if the AP does not advertise WAN Metrics information or if the
+# limit would prevent any connection. Values are in kilobits per second.
+# min_dl_bandwidth_home
+# min_ul_bandwidth_home
+# min_dl_bandwidth_roaming
+# min_ul_bandwidth_roaming
+#
+# max_bss_load: Maximum BSS Load Channel Utilization (1..255)
+# (PPS/<X+>/Policy/MaximumBSSLoadValue)
+# This value is used as the maximum channel utilization for network
+# selection purposes for home networks. If the AP does not advertise
+# BSS Load or if the limit would prevent any connection, this constraint
+# will be ignored.
+#
+# req_conn_capab: Required connection capability
+# (PPS/<X+>/Policy/RequiredProtoPortTuple)
+# This value is used to configure set of required protocol/port pairs that
+# a roaming network shall support (include explicitly in Connection
+# Capability ANQP element). This constraint is ignored if the AP does not
+# advertise Connection Capability or if this constraint would prevent any
+# network connection. This policy is not used in home networks.
+# Format: <protocol>[:<comma-separated list of ports]
+# Multiple entries can be used to list multiple requirements.
+# For example, number of common TCP protocols:
+# req_conn_capab=6:22,80,443
+# For example, IPSec/IKE:
+# req_conn_capab=17:500
+# req_conn_capab=50
+#
+# ocsp: Whether to use/require OCSP to check server certificate
+# 0 = do not use OCSP stapling (TLS certificate status extension)
+# 1 = try to use OCSP stapling, but not require response
+# 2 = require valid OCSP stapling response
+#
+# sim_num: Identifier for which SIM to use in multi-SIM devices
+#
# for example:
#
#cred={
<3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
<3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
<3>ANQP fetch completed
+
+
+Hotspot 2.0 Rel 2 online signup and OSEN
+----------------------------------------
+
+Following parameters can be used to create a network profile for
+link-layer protected Hotspot 2.0 online signup connection with
+OSEN. Note that ssid and identify (NAI) values need to be set based on
+the information for the selected provider in the OSU Providers list
+ANQP-element.
+
+network={
+ ssid="HS 2.0 OSU"
+ proto=OSEN
+ key_mgmt=OSEN
+ pairwise=CCMP
+ group=GTK_NOT_USED
+ eap=WFA-UNAUTH-TLS
+ identity="anonymous@example.com"
+ ca_cert="osu-ca.pem"
+ ocsp=2
+}
+
+
+Hotspot 2.0 connection with external network selection
+------------------------------------------------------
+
+When an component controlling wpa_supplicant takes care of Interworking
+network selection, following configuration and network profile
+parameters can be used to configure a temporary network profile for a
+Hotspot 2.0 connection (e.g., with SET, ADD_NETWORK, SET_NETWORK, and
+SELECT_NETWORK control interface commands):
+
+interworking=1
+hs20=1
+auto_interworking=0
+
+network={
+ ssid="test-hs20"
+ proto=RSN
+ key_mgmt=WPA-EAP
+ pairwise=CCMP
+ anonymous_identity="anonymous@example.com"
+ identity="hs20-test@example.com"
+ password="password"
+ ca_cert="ca.pem"
+ eap=TTLS
+ phase2="auth=MSCHAPV2"
+ update_identifier=54321
+ #ocsp=2
+}
+
+
+These parameters are set based on the PPS MO credential and/or NAI Realm
+list ANQP-element:
+
+anonymous_identity: Credential/UsernamePassword/Username with username part
+ replaced with "anonymous"
+identity: Credential/UsernamePassword/Username
+password: Credential/UsernamePassword/Password
+update_identifier: PPS/UpdateIdentifier
+ca_cert: from the downloaded trust root based on PPS information
+eap: Credential/UsernamePassword/EAPMethod or NAI Realm list
+phase2: Credential/UsernamePassword/EAPMethod or NAI Realm list
+ocsp: Credential/CheckAAAServerCertStatus