p2p_find [timeout in seconds] [type=<social|progressive>] \
[dev_id=<addr>] [dev_type=<device type>] \
- [delay=<search delay in ms>]
+ [delay=<search delay in ms>] [seek=<service name>]
The default behavior is to run a single full scan in the beginning and
then scan only social channels. type=social will scan only social
(primary or secondary) to search for, e.g.,
"p2p_find dev_type=1-0050F204-1".
+
+With one or more seek arguments, the command sends Probe Request frames
+for a P2PS service. For example,
+p2p_find 5 dev_id=11:22:33:44:55:66 seek=alt.example.chat seek=alt.example.video
+
+Parameters description:
+ Timeout - Optional ASCII base-10-encoded u16. If missing, request will not
+ time out and must be canceled manually
+ dev_id - Optional to request responses from a single known remote device
+ Service Name - Mandatory UTF-8 string for ASP seeks
+ Service name must match the remote service being advertised exactly
+ (no prefix matching).
+ Service name may be empty, in which case all ASP services will be
+ returned, and may be filtered with p2p_serv_disc_req settings, and
+ p2p_serv_asp_resp results.
+ Multiple service names may be requested, but if it exceeds internal
+ limit, it will automatically revert to requesting all ASP services.
+
p2p_listen [timeout in seconds]
Start Listen-only state (become discoverable without searching for
out whether the peer device is operating as a GO and if so, use
join-a-group style PD instead of GO Negotiation style PD.
-p2p_connect <peer device address> <pbc|pin|PIN#> [display|keypad]
+p2p_connect <peer device address> <pbc|pin|PIN#|p2ps> [display|keypad|p2ps]
[persistent|persistent=<network id>] [join|auth]
[go_intent=<0..15>] [freq=<in MHz>] [ht40] [vht] [provdisc] [auto]
out whether the peer device is operating as a GO and if so, use
join-a-group operation rather than GO Negotiation.
+P2PS attribute changes to p2p_connect command:
+
+P2PS supports two WPS provisioning methods namely PIN method and P2PS default.
+The remaining paramters hold same role as in legacy P2P. In case of P2PS default
+config method "p2ps" keyword is added in p2p_connect command.
+
+For example:
+p2p_connect 02:0a:f5:85:11:00 12345670 p2ps persistent join
+ (WPS Method = P2PS default)
+
+p2p_connect 02:0a:f5:85:11:00 45629034 keypad persistent
+ (WPS Method = PIN)
+
+p2p_asp_provision <peer MAC address> <adv_id=peer adv id>
+ <adv_mac=peer MAC address> [role=2|4|1] <session=session id>
+ <session_mac=initiator mac address>
+ [info='service info'] <method=Default|keypad|Display>
+
+This command starts provision discovery with the P2PS enabled peer device.
+
+For example,
+p2p_asp_provision 00:11:22:33:44:55 adv_id=4d6fc7 adv_mac=00:55:44:33:22:11 role=1 session=12ab34 session_mac=00:11:22:33:44:55 info='name=john' method=1000
+
+Parameter description:
+ MAC address - Mandatory
+ adv_id - Mandatory remote Advertising ID of service connection is being
+ established for
+ adv_mac - Mandatory MAC address that owns/registered the service
+ role - Optional
+ 2 (group client only) or 4 (group owner only)
+ if not present (or 1) role is negotiated by the two peers.
+ session - Mandatory Session ID of the first session to be established
+ session_mac - Mandatory MAC address that owns/initiated the session
+ method - Optional method to request for provisioning (1000 - P2PS Default,
+ 100 - Keypad(PIN), 8 - Display(PIN))
+ info - Optional UTF-8 string. Hint for service to indicate possible usage
+ parameters - Escape single quote & backslash:
+ with a backslash 0x27 == ' == \', and 0x5c == \ == \\
+
+p2p_asp_provision_resp <peer mac address> <adv_id= local adv id>
+ <adv_mac=local MAC address> <role=1|2|4> <status=0>
+ <session=session id> <session_mac=peer MAC address>
+
+This command sends a provision discovery response from responder side.
+
+For example,
+p2p_asp_provision_resp 00:55:44:33:22:11 adv_id=4d6fc7 adv_mac=00:55:44:33:22:11 role=1 status=0 session=12ab34 session_mac=00:11:22:33:44:55
+
+Parameters definition:
+ MAC address - Mandatory
+ adv_id - Mandatory local Advertising ID of service connection is being
+ established for
+ adv_mac - Mandatory MAC address that owns/registered the service
+ role - Optional 2 (group client only) or 4 (group owner only)
+ if not present (or 1) role is negotiated by the two peers.
+ status - Mandatory Acceptance/Rejection code of Provisioning
+ session - Mandatory Session ID of the first session to be established
+ session_mac - Mandatory MAC address that owns/initiated the session
+
p2p_group_add [persistent|persistent=<network id>] [freq=<freq in MHz>]
[ht40] [vht]
Service Discovery
+p2p_service_add asp <auto accept> <adv id> <status 0/1> <Config Methods>
+ <Service name> [Service Information] [Response Info]
+
+This command can be used to search for a P2PS service which includes
+Play, Send, Display, and Print service. The parameters for this command
+are "asp" to identify the command as P2PS one, auto accept value,
+advertisement id which uniquely identifies the service requests, state
+of the service whether the service is available or not, config methods
+which can be either P2PS method or PIN method, service name followed by
+two optional parameters service information, and response info.
+
+For example,
+p2p_service_add asp 1 4d6fc7 0 1108 alt.example.chat svc_info='name=john' rsp_info='enter PIN 1234'
+
+Parameters definition:
+ asp - Mandatory for ASP service registration
+ auto accept - Mandatory ASCII hex-encoded boolean (0 == no auto-accept,
+ 1 == auto-accept ANY role, 2 == auto-accept CLIENT role,
+ 4 == auto-accept GO role)
+ Advertisement ID - Mandatory non-zero ASCII hex-encoded u32
+ (Must be unique/not yet exist in svc db)
+ State - Mandatory ASCII hex-encoded u8 (0 -- Svc not available,
+ 1 -- Svc available, 2-0xff Application defined)
+ Config Methods - Mandatory ASCII hex-encoded u16 (bitmask of WSC config
+ methods)
+ Service Name - Mandatory UTF-8 string
+ Service Information - Optional UTF-8 string
+ Escape single quote & backslash with a backslash:
+ 0x27 == ' == \', and 0x5c == \ == \\
+ Session response information - Optional (used only if auto accept is TRUE)
+ UTF-8 string
+ Escape single quote & backslash with a backslash:
+ 0x27 == ' == \', and 0x5c == \ == \\
+
+p2p_service_rep asp <auto accept> <adv id> <status 0/1> <Config Methods>
+ <Service name> [Service Information] [Response Info]
+
+This command can be used to replace the existing service request
+attributes from the initiator side. The replacement is only allowed if
+the advertisement id issued in the command matches with any one entry in
+the list of existing SD queries. If advertisement id doesn't match the
+command returns a failure.
+
+For example,
+p2p_service_rep asp 1 4d6fc7 1 1108 alt.example.chat svc_info='name=john' rsp_info='enter PIN 1234'
+
+Parameters definition:
+ asp - Mandatory for ASP service registration
+ auto accept - Mandatory ASCII hex-encoded boolean (1 == true, 0 == false)
+ Advertisement ID - Mandatory non-zero ASCII hex-encoded u32
+ (Must already exist in svc db)
+ State - Mandatory ASCII hex-encoded u8 (can be used to indicate svc
+ available or not available for instance)
+ Config Methods - Mandatory ASCII hex-encoded u16 (bitmask of WSC config
+ methods)
+ Service Name - Mandatory UTF-8 string (Must match existing string in svc db)
+ Service Information - Optional UTF-8 string
+ Escape single quote & backslash with a backslash:
+ 0x27 == ' == \', and 0x5c == \ == \\
+ Session response information - Optional (used only if auto accept is TRUE)
+ UTF-8 string
+ Escape single quote & backslash with a backslash:
+ 0x27 == ' == \', and 0x5c == \ == \\
+
p2p_serv_disc_req
Schedule a P2P service discovery request. The parameters for this
p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source+sink] 2,3,4,5
p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source][pri-sink] 2,3,4,5
+p2p_serv_disc_req <Unicast|Broadcast mac address> asp <Transaction ID>
+ <Service Name> [Service Information]
+
+The command can be used for service discovery for P2PS enabled devices.
+
+For example: p2p_serv_disc_req 00:00:00:00:00:00 asp a1 alt.example 'john'
+
+Parameters definition:
+ MAC address - Mandatory Existing
+ asp - Mandatory for ASP queries
+ Transaction ID - Mandatory non-zero ASCII hex-encoded u8 for GAS
+ Service Name Prefix - Mandatory UTF-8 string.
+ Will match from beginning of remote Service Name
+ Service Information Substring - Optional UTF-8 string
+ If Service Information Substring is not included, all services matching
+ Service Name Prefix will be returned.
+ If Service Information Substring is included, both the Substring and the
+ Service Name Prefix must match for service to be returned.
+ If remote service has no Service Information, all Substring searches
+ will fail.
+
p2p_serv_disc_cancel_req <query identifier>
Cancel a pending P2P service discovery request. This command takes a
Remove a local UPnP service from internal SD query processing.
+p2p_service_del asp <adv id>
+
+Removes the local asp service from internal SD query list.
+For example: p2p_service_del asp 4d6fc7
+
p2p_service_flush
Remove all local services from internal SD query processing.
Remove a network entry from configuration.
+P2PS Events/Responses:
+
+P2PS-PROV-START: This events gets triggered when provisioning is issued for
+either seeker or advertiser.
+
+For example,
+P2PS-PROV-START 00:55:44:33:22:11 adv_id=111 adv_mac=00:55:44:33:22:11 conncap=1 session=1234567 session_mac=00:11:22:33:44:55 info='xxxx'
+
+Parameters definition:
+ MAC address - always
+ adv_id - always ASCII hex-encoded u32
+ adv_mac - always MAC address that owns/registered the service
+ conncap - always mask of 0x01 (new), 0x02 (group client), 0x04 (group owner)
+ bits
+ session - always Session ID of the first session to be established
+ session_mac - always MAC address that owns/initiated the session
+ info - if available, UTF-8 string
+ Escaped single quote & backslash with a backslash:
+ \' == 0x27 == ', and \\ == 0x5c == \
+
+P2PS-PROV-DONE: When provisioning is completed then this event gets triggered.
+
+For example,
+P2PS-PROV-DONE 00:11:22:33:44:55 status=0 adv_id=111 adv_mac=00:55:44:33:22:11 conncap=1 session=1234567 session_mac=00:11:22:33:44:55 [dev_passwd_id=8 | go=p2p-wlan0-0 | join=11:22:33:44:55:66 | persist=0]
+
+Parameters definition:
+ MAC address - always main device address of peer. May be different from MAC
+ ultimately connected to.
+ status - always ascii hex-encoded u8 (0 == success, 12 == deferred success)
+ adv_id - always ascii hex-encoded u32
+ adv_mac - always MAC address that owns/registered the service
+ conncap - always One of: 1 (new), 2 (group client), 4 (group owner) bits
+ session - always Session ID of the first session to be established
+ session_mac - always MAC address that owns/initiated the session
+ dev_passwd_id - only if conncap value == 1 (New GO negotiation)
+ 8 - "p2ps" password must be passed in p2p_connect command
+ 1 - "display" password must be passed in p2p_connect command
+ 5 - "keypad" password must be passed in p2p_connect command
+ join only - if conncap value == 2 (Client Only). Display password and "join"
+ must be passed in p2p_connect and address must be the MAC specified
+ go only - if conncap value == 4 (GO Only). Interface name must be set with a
+ password
+ persist - only if previous persistent group existed between peers and shall
+ be re-used. Group is restarted by sending "p2p_group_add persistent=0"
+ where value is taken from P2P-PROV-DONE
+
+Extended Events/Response
+
+P2P-DEVICE-FOUND 00:11:22:33:44:55 p2p_dev_addr=00:11:22:33:44:55 pri_dev_type=0-00000000-0 name='' config_methods=0x108 dev_capab=0x21 group_capab=0x0 adv_id=111 asp_svc=alt.example.chat
+
+Parameters definition:
+ adv_id - if ASP ASCII hex-encoded u32. If it is reporting the
+ "wildcard service", this value will be 0
+ asp_svc - if ASP this is the service string. If it is reporting the
+ "wildcard service", this value will be org.wi-fi.wfds
+
+
wpa_cli action script
---------------------
projects / mech_eap.git / blobdiff