CONFIG_DRIVER_NL80211=y
CONFIG_WPS=y
-CONFIG_WPS2=y
If you want to enable WPS external registrar (ER) functionality, you
will also need to add following line:
<encr> must be one of the following: NONE WEP TKIP CCMP
-wps_er_pbc <Enrollee UUID>
+wps_er_pbc <Enrollee UUID|MAC address>
- accept an Enrollee PBC using External Registrar
-wps_er_pin <Enrollee UUID> <PIN> [Enrollee MAC address]
+wps_er_pin <Enrollee UUID|"any"|MAC address> <PIN> [Enrollee MAC address]
- add an Enrollee PIN to External Registrar
- if Enrollee UUID is not known, "any" can be used to add a wildcard PIN
- if the MAC address of the enrollee is known, it should be configured
can be used to touch an NFC interface on a station to provision the
credentials needed to access the network.
+The "wps_nfc_config_token <WPS/NDEF> <network id>" command can be used
+to build an NFC configuration token based on a locally configured
+network.
+
If the station includes NFC interface and reads an NFC tag with a MIME
media type "application/vnd.wfa.wsc", the NDEF message payload (with or
without NDEF encapsulation) can be delivered to wpa_supplicant using the
token is used to enable enrollment of a new station (that was the source
of the NFC password token).
-"nfc_get_handover_req <NDEF> <WPS>" command can be used to build the
-contents of a Handover Request Message for connection handover. The
-first argument selects the format of the output data and the second
-argument selects which type of connection handover is requested (WPS =
-Wi-Fi handover as specified in WSC 2.0).
+"nfc_get_handover_req <NDEF> <WPS-CR>" command can be used to build the
+WPS carrier record for a Handover Request Message for connection
+handover. The first argument selects the format of the output data and
+the second argument selects which type of connection handover is
+requested (WPS-CR = Wi-Fi handover as specified in WSC 2.0).
"nfc_get_handover_sel <NDEF> <WPS> [UUID|BSSID]" command can be used to
build the contents of a Handover Select Message for connection handover
message for the specified AP when wpa_supplicant is operating as a WPS
ER.
-"nfc_rx_handover_req <hexdump of payload>" is used to indicate receipt
-of NFC connection handover request. The payload may include multiple
-carriers the the applicable ones are matched based on the media
-type. The reply data is contents for the Handover Select Message
-(hexdump).
-
-"nfc_rx_handover_sel <hexdump of payload>" is used to indicate receipt
-of NFC connection handover select. The payload may include multiple
-carriers the the applicable ones are matched based on the media
-type.
-
"nfc_report_handover <INIT/RESP> WPS <carrier from handover request>
<carrier from handover select>" can be used as an alternative way for
reporting completed NFC connection handover. The first parameter