Remove disconnected APs from BSS table if likely out-of-range

[mech_eap.git] / wpa_supplicant / config.h

diff --git a/wpa_supplicant/config.h b/wpa_supplicant/config.h
index 27e9b98..48e64be 100644 (file)
--- a/wpa_supplicant/config.h
+++ b/wpa_supplicant/config.h
@@ -40,6 +40,7 @@
 #define DEFAULT_CERT_IN_CB 1
 #define DEFAULT_P2P_GO_CTWINDOW 0
 #define DEFAULT_WPA_RSC_RELAXATION 1
+#define DEFAULT_MBO_CELL_CAPA MBO_CELL_CAPA_NOT_SUPPORTED
 
 #include "config_ssid.h"
 #include "wps/wps.h"
@@ -1038,7 +1039,8 @@ struct wpa_config {
         *
         * By default, PMF is disabled unless enabled by the per-network
         * ieee80211w=1 or ieee80211w=2 parameter. pmf=1/2 can be used to change
-        * this default behavior.
+        * this default behavior for RSN network (this is not applicable for
+        * non-RSN cases).
         */
        enum mfp_options pmf;
 
@@ -1284,7 +1286,48 @@ struct wpa_config {
         * Detail is optional.
         */
        char *non_pref_chan;
+
+       /**
+        * mbo_cell_capa - Cellular capabilities for MBO
+        */
+       enum mbo_cellular_capa mbo_cell_capa;
 #endif /* CONFIG_MBO */
+
+       /**
+        * gas_address3 - GAS Address3 field behavior
+        *
+        * Values:
+        * 0 - P2P specification (Address3 = AP BSSID)
+        * 1 = IEEE 802.11 standard compliant (Address3 = Wildcard BSSID when
+        *      sent to not-associated AP; if associated, AP BSSID)
+        */
+       int gas_address3;
+
+       /**
+        * ftm_responder - Publish FTM (fine timing measurement)
+        * responder functionality
+        *
+        * Values:
+        * 0 - do not publish FTM responder functionality (Default)
+        * 1 - publish FTM responder functionality in
+        *      bit 70 of Extended Capabilities element
+        * Note, actual FTM responder operation is managed outside
+        * wpa_supplicant.
+        */
+       int ftm_responder;
+
+       /**
+        * ftm_initiator - Publish FTM (fine timing measurement)
+        * initiator functionality
+        *
+        * Values:
+        * 0 - do not publish FTM initiator functionality (Default)
+        * 1 - publish FTM initiator functionality in
+        *      bit 71 of Extended Capabilities element
+        * Note, actual FTM initiator operation is managed outside
+        * wpa_supplicant.
+        */
+       int ftm_initiator;
 };