#include "utils/list.h"
#include "eap_peer/eap_config.h"
-#define MAX_SSID_LEN 32
-
#define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
#define DEFAULT_EAPOL_FLAGS (EAPOL_FLAG_REQUIRE_KEY_UNICAST | \
#define DEFAULT_PROTO (WPA_PROTO_WPA | WPA_PROTO_RSN)
#define DEFAULT_KEY_MGMT (WPA_KEY_MGMT_PSK | WPA_KEY_MGMT_IEEE8021X)
#define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
-#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP | \
- WPA_CIPHER_WEP104 | WPA_CIPHER_WEP40)
+#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
#define DEFAULT_FRAGMENT_SIZE 1398
#define DEFAULT_BG_SCAN_PERIOD -1
+#define DEFAULT_MESH_MAX_RETRIES 2
+#define DEFAULT_MESH_RETRY_TIMEOUT 40
+#define DEFAULT_MESH_CONFIRM_TIMEOUT 40
+#define DEFAULT_MESH_HOLDING_TIMEOUT 40
#define DEFAULT_DISABLE_HT 0
#define DEFAULT_DISABLE_HT40 0
#define DEFAULT_DISABLE_SGI 0
u8 bssid[ETH_ALEN];
/**
+ * bssid_blacklist - List of inacceptable BSSIDs
+ */
+ u8 *bssid_blacklist;
+ size_t num_bssid_blacklist;
+
+ /**
+ * bssid_blacklist - List of acceptable BSSIDs
+ */
+ u8 *bssid_whitelist;
+ size_t num_bssid_whitelist;
+
+ /**
* bssid_set - Whether BSSID is configured for this network
*/
int bssid_set;
char *ext_psk;
/**
+ * mem_only_psk - Whether to keep PSK/passphrase only in memory
+ *
+ * 0 = allow psk/passphrase to be stored to the configuration file
+ * 1 = do not store psk/passphrase to the configuration file
+ */
+ int mem_only_psk;
+
+ /**
* pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_*
*/
int pairwise_cipher;
*
* scan_ssid can be used to scan for APs using hidden SSIDs.
* Note: Many drivers do not support this. ap_mode=2 can be used with
- * such drivers to use hidden SSIDs.
+ * such drivers to use hidden SSIDs. Note2: Most nl80211-based drivers
+ * do support scan_ssid=1 and that should be used with them instead of
+ * ap_scan=2.
*/
int scan_ssid;
* 4 = P2P Group Formation (used internally; not in configuration
* files)
*
+ * 5 = Mesh
+ *
* Note: IBSS can only be used with key_mgmt NONE (plaintext and static
* WEP) and WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE
* (fixed group key TKIP/CCMP) is available for backwards compatibility,
WPAS_MODE_AP = 2,
WPAS_MODE_P2P_GO = 3,
WPAS_MODE_P2P_GROUP_FORMATION = 4,
+ WPAS_MODE_MESH = 5,
} mode;
/**
+ * pbss - Whether to use PBSS. Relevant to DMG networks only.
+ * 0 = do not use PBSS
+ * 1 = use PBSS
+ * 2 = don't care (not allowed in AP mode)
+ * Used together with mode configuration. When mode is AP, it
+ * means to start a PCP instead of a regular AP. When mode is INFRA it
+ * means connect to a PCP instead of AP. In this mode you can also
+ * specify 2 (don't care) meaning connect to either AP or PCP.
+ * P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in DMG network.
+ */
+ int pbss;
+
+ /**
* disabled - Whether this network is currently disabled
*
* 0 = this network can be used (default).
*/
int frequency;
+ /**
+ * fixed_freq - Use fixed frequency for IBSS
+ */
+ int fixed_freq;
+
+#ifdef CONFIG_ACS
+ /**
+ * ACS - Automatic Channel Selection for AP mode
+ *
+ * If present, it will be handled together with frequency.
+ * frequency will be used to determine hardware mode only, when it is
+ * used for both hardware mode and channel when used alone. This will
+ * force the channel to be set to 0, thus enabling ACS.
+ */
+ int acs;
+#endif /* CONFIG_ACS */
+
+ /**
+ * mesh_basic_rates - BSS Basic rate set for mesh network
+ *
+ */
+ int *mesh_basic_rates;
+
+ /**
+ * Mesh network plink parameters
+ */
+ int dot11MeshMaxRetries;
+ int dot11MeshRetryTimeout; /* msec */
+ int dot11MeshConfirmTimeout; /* msec */
+ int dot11MeshHoldingTimeout; /* msec */
+
int ht40;
int vht;
+ u8 max_oper_chwidth;
+
+ unsigned int vht_center_freq2;
+
/**
* wpa_ptk_rekey - Maximum lifetime for PTK in seconds
*
int wpa_ptk_rekey;
/**
+ * group_rekey - Group rekeying time in seconds
+ *
+ * This value, if non-zero, is used as the dot11RSNAConfigGroupRekeyTime
+ * parameter when operating in Authenticator role in IBSS.
+ */
+ int group_rekey;
+
+ /**
* scan_freq - Array of frequencies to scan or %NULL for all
*
* This is an optional zero-terminated array of frequencies in
* followed).
*/
int mac_addr;
+
+ /**
+ * no_auto_peer - Do not automatically peer with compatible mesh peers
+ *
+ * When unset, the reception of a beacon from a another mesh peer in
+ * this MBSS will trigger a peering attempt.
+ */
+ int no_auto_peer;
+
+ /**
+ * wps_disabled - WPS disabled in AP mode
+ *
+ * 0 = WPS enabled and configured (default)
+ * 1 = WPS disabled
+ */
+ int wps_disabled;
};
#endif /* CONFIG_SSID_H */