#include "utils/common.h"
#include "common/ieee802_11_defs.h"
+#include "common/gas.h"
#include "config.h"
#include "wpa_supplicant_i.h"
#include "driver_i.h"
#include "bss.h"
+#include "scan.h"
/* type + length + oui + oui type */
#define MBO_IE_HEADER 6
wpabuf_put_u8(mbo, wpa_s->non_pref_chan[start].preference);
wpabuf_put_u8(mbo, wpa_s->non_pref_chan[start].reason);
- wpabuf_put_u8(mbo, wpa_s->non_pref_chan[start].reason_detail);
}
static void wpas_mbo_non_pref_chan_attr(struct wpa_supplicant *wpa_s,
struct wpabuf *mbo, u8 start, u8 end)
{
- size_t size = end - start + 4;
+ size_t size = end - start + 3;
if (size + 2 > wpabuf_tailroom(mbo))
return;
struct wpabuf *mbo, u8 start,
u8 end)
{
- size_t size = end - start + 8;
+ size_t size = end - start + 7;
if (size + 2 > wpabuf_tailroom(mbo))
return;
if (!non_pref ||
non_pref->oper_class != start_pref->oper_class ||
non_pref->reason != start_pref->reason ||
- non_pref->reason_detail != start_pref->reason_detail ||
non_pref->preference != start_pref->preference) {
if (subelement)
wpas_mbo_non_pref_chan_subelement(wpa_s, mbo,
*
* In MBO IE non-preferred channel subelement we can put many channels in an
* attribute if they are in the same operating class and have the same
- * preference, reason, and reason detail. To make it easy for the functions that
- * build the IE attributes and WNM Request subelements, save the channels sorted
- * by their oper_class, reason, and reason_detail.
+ * preference and reason. To make it easy for the functions that build
+ * the IE attributes and WNM Request subelements, save the channels sorted
+ * by their oper_class and reason.
*/
static int wpa_non_pref_chan_cmp(const void *_a, const void *_b)
{
return a->oper_class - b->oper_class;
if (a->reason != b->reason)
return a->reason - b->reason;
- if (a->reason_detail != b->reason_detail)
- return a->reason_detail - b->reason_detail;
return a->preference - b->preference;
}
unsigned int _chan;
unsigned int _preference;
unsigned int _reason;
- unsigned int _reason_detail;
if (num == size) {
size = size ? size * 2 : 1;
chan = &chans[num];
- ret = sscanf(token, "%u:%u:%u:%u:%u", &_oper_class,
- &_chan, &_preference, &_reason,
- &_reason_detail);
- if ((ret != 4 && ret != 5) ||
+ ret = sscanf(token, "%u:%u:%u:%u", &_oper_class,
+ &_chan, &_preference, &_reason);
+ if (ret != 4 ||
_oper_class > 255 || _chan > 255 ||
- _preference > 255 || _reason > 65535 ||
- (ret == 5 && _reason_detail > 255)) {
+ _preference > 255 || _reason > 65535 ) {
wpa_printf(MSG_ERROR, "Invalid non-pref chan input %s",
token);
goto fail;
chan->chan = _chan;
chan->preference = _preference;
chan->reason = _reason;
- chan->reason_detail = ret == 4 ? 0 : _reason_detail;
if (wpas_mbo_validate_non_pref_chan(chan->oper_class,
chan->chan, chan->reason)) {
return NOT_ALLOWED;
res2 = allow_channel(mode, channel + 4, NULL);
} else if (bw == BW80) {
- res2 = verify_80mhz(mode, channel);
+ /*
+ * channel is a center channel and as such, not necessarily a
+ * valid 20 MHz channels. Override earlier allow_channel()
+ * result and use only the 80 MHz specific version.
+ */
+ res2 = res = verify_80mhz(mode, channel);
} else if (bw == BW160) {
- res2 = verify_160mhz(mode, channel);
+ /*
+ * channel is a center channel and as such, not necessarily a
+ * valid 20 MHz channels. Override earlier allow_channel()
+ * result and use only the 160 MHz specific version.
+ */
+ res2 = res = verify_160mhz(mode, channel);
+ } else if (bw == BW80P80) {
+ /*
+ * channel is a center channel and as such, not necessarily a
+ * valid 20 MHz channels. Override earlier allow_channel()
+ * result and use only the 80 MHz specific version.
+ */
+ res2 = res = verify_80mhz(mode, channel);
}
if (res == NOT_ALLOWED || res2 == NOT_ALLOWED)
int chan;
size_t i;
struct hostapd_hw_modes *mode;
+ int found;
mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, op_class->mode);
if (!mode)
return 0;
- if (op_class->op_class == 128 || op_class->op_class == 130) {
+ if (op_class->op_class == 128) {
u8 channels[] = { 42, 58, 106, 122, 138, 155 };
for (i = 0; i < ARRAY_SIZE(channels); i++) {
if (verify_channel(mode, channels[i], op_class->bw) ==
- NOT_ALLOWED)
- return 0;
+ ALLOWED)
+ return 1;
}
- return 1;
+ return 0;
}
if (op_class->op_class == 129) {
- if (verify_channel(mode, 50, op_class->bw) == NOT_ALLOWED ||
- verify_channel(mode, 114, op_class->bw) == NOT_ALLOWED)
- return 0;
+ /* Check if either 160 MHz channels is allowed */
+ return verify_channel(mode, 50, op_class->bw) == ALLOWED ||
+ verify_channel(mode, 114, op_class->bw) == ALLOWED;
+ }
+
+ if (op_class->op_class == 130) {
+ /* Need at least two non-contiguous 80 MHz segments */
+ found = 0;
+
+ if (verify_channel(mode, 42, op_class->bw) == ALLOWED ||
+ verify_channel(mode, 58, op_class->bw) == ALLOWED)
+ found++;
+ if (verify_channel(mode, 106, op_class->bw) == ALLOWED ||
+ verify_channel(mode, 122, op_class->bw) == ALLOWED ||
+ verify_channel(mode, 138, op_class->bw) == ALLOWED)
+ found++;
+ if (verify_channel(mode, 106, op_class->bw) == ALLOWED &&
+ verify_channel(mode, 138, op_class->bw) == ALLOWED)
+ found++;
+ if (verify_channel(mode, 155, op_class->bw) == ALLOWED)
+ found++;
+
+ if (found >= 2)
+ return 1;
- return 1;
+ return 0;
}
+ found = 0;
for (chan = op_class->min_chan; chan <= op_class->max_chan;
chan += op_class->inc) {
- if (verify_channel(mode, chan, op_class->bw) == NOT_ALLOWED)
- return 0;
+ if (verify_channel(mode, chan, op_class->bw) == ALLOWED) {
+ found = 1;
+ break;
+ }
}
- return 1;
+ return found;
}
cell_capa[6] = mbo_cell_capa;
wpas_mbo_send_wnm_notification(wpa_s, cell_capa, 7);
+ wpa_supplicant_set_default_scan_ies(wpa_s);
+}
+
+
+struct wpabuf * mbo_build_anqp_buf(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss)
+{
+ struct wpabuf *anqp_buf;
+ u8 *len_pos;
+
+ if (!wpa_bss_get_vendor_ie(bss, MBO_IE_VENDOR_TYPE)) {
+ wpa_printf(MSG_INFO, "MBO: " MACSTR
+ " does not support MBO - cannot request MBO ANQP elements from it",
+ MAC2STR(bss->bssid));
+ return NULL;
+ }
+
+ anqp_buf = wpabuf_alloc(10);
+ if (!anqp_buf)
+ return NULL;
+
+ len_pos = gas_anqp_add_element(anqp_buf, ANQP_VENDOR_SPECIFIC);
+ wpabuf_put_be24(anqp_buf, OUI_WFA);
+ wpabuf_put_u8(anqp_buf, MBO_ANQP_OUI_TYPE);
+
+ wpabuf_put_u8(anqp_buf, MBO_ANQP_SUBTYPE_CELL_CONN_PREF);
+ gas_anqp_set_element_len(anqp_buf, len_pos);
+
+ return anqp_buf;
}
projects / mech_eap.git / blobdiff