mesh: Report HT operation mode to kernel
[mech_eap.git] / wpa_supplicant / wpa_supplicant.c
index aa785bd..28fbdf2 100644 (file)
@@ -1873,6 +1873,13 @@ void ibss_mesh_setup_freq(struct wpa_supplicant *wpa_s,
        if (!mode)
                return;
 
+#ifdef CONFIG_HT_OVERRIDES
+       if (ssid->disable_ht) {
+               freq->ht_enabled = 0;
+               return;
+       }
+#endif /* CONFIG_HT_OVERRIDES */
+
        freq->ht_enabled = ht_supported(mode);
        if (!freq->ht_enabled)
                return;
@@ -1894,6 +1901,11 @@ void ibss_mesh_setup_freq(struct wpa_supplicant *wpa_s,
        if (pri_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
                return;
 
+#ifdef CONFIG_HT_OVERRIDES
+       if (ssid->disable_ht40)
+               return;
+#endif /* CONFIG_HT_OVERRIDES */
+
        /* Check/setup HT40+/HT40- */
        for (j = 0; j < ARRAY_SIZE(ht40plus); j++) {
                if (ht40plus[j] == channel) {
@@ -1918,22 +1930,16 @@ void ibss_mesh_setup_freq(struct wpa_supplicant *wpa_s,
 
        freq->channel = pri_chan->chan;
 
-       switch (ht40) {
-       case -1:
+       if (ht40 == -1) {
                if (!(pri_chan->flag & HOSTAPD_CHAN_HT40MINUS))
                        return;
-               freq->sec_channel_offset = -1;
-               break;
-       case 1:
+       } else {
                if (!(pri_chan->flag & HOSTAPD_CHAN_HT40PLUS))
                        return;
-               freq->sec_channel_offset = 1;
-               break;
-       default:
-               break;
        }
+       freq->sec_channel_offset = ht40;
 
-       if (freq->sec_channel_offset && obss_scan) {
+       if (obss_scan) {
                struct wpa_scan_results *scan_res;
 
                scan_res = wpa_supplicant_get_scan_results(wpa_s, NULL, 0);
@@ -2039,6 +2045,16 @@ void ibss_mesh_setup_freq(struct wpa_supplicant *wpa_s,
                        if (chwidth == VHT_CHANWIDTH_80P80MHZ)
                                break;
                }
+       } else if (ssid->max_oper_chwidth == VHT_CHANWIDTH_160MHZ) {
+               if (freq->freq == 5180) {
+                       chwidth = VHT_CHANWIDTH_160MHZ;
+                       vht_caps |= VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
+                       seg0 = 50;
+               } else if (freq->freq == 5520) {
+                       chwidth = VHT_CHANWIDTH_160MHZ;
+                       vht_caps |= VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
+                       seg0 = 114;
+               }
        }
 
        if (hostapd_set_freq_params(&vht_freq, mode->mode, freq->freq,
@@ -2291,6 +2307,11 @@ static void wpas_start_assoc_cb(struct wpa_radio_work *work, int deinit)
         * element in all cases, it is justifiable to skip it to avoid
         * interoperability issues.
         */
+       if (ssid->p2p_group)
+               wpa_drv_get_ext_capa(wpa_s, WPA_IF_P2P_CLIENT);
+       else
+               wpa_drv_get_ext_capa(wpa_s, WPA_IF_STATION);
+
        if (!bss || wpa_bss_get_ie(bss, WLAN_EID_EXT_CAPAB)) {
                u8 ext_capab[18];
                int ext_capab_len;
@@ -3791,8 +3812,8 @@ void wpa_supplicant_apply_vht_overrides(
        if (!vhtcaps || !vhtcaps_mask)
                return;
 
-       vhtcaps->vht_capabilities_info = ssid->vht_capa;
-       vhtcaps_mask->vht_capabilities_info = ssid->vht_capa_mask;
+       vhtcaps->vht_capabilities_info = host_to_le32(ssid->vht_capa);
+       vhtcaps_mask->vht_capabilities_info = host_to_le32(ssid->vht_capa_mask);
 
 #ifdef CONFIG_HT_OVERRIDES
        /* if max ampdu is <= 3, we have to make the HT cap the same */
@@ -3814,15 +3835,17 @@ void wpa_supplicant_apply_vht_overrides(
 #define OVERRIDE_MCS(i)                                                        \
        if (ssid->vht_tx_mcs_nss_ ##i >= 0) {                           \
                vhtcaps_mask->vht_supported_mcs_set.tx_map |=           \
-                       3 << 2 * (i - 1);                               \
+                       host_to_le16(3 << 2 * (i - 1));                 \
                vhtcaps->vht_supported_mcs_set.tx_map |=                \
-                       ssid->vht_tx_mcs_nss_ ##i << 2 * (i - 1);       \
+                       host_to_le16(ssid->vht_tx_mcs_nss_ ##i <<       \
+                                    2 * (i - 1));                      \
        }                                                               \
        if (ssid->vht_rx_mcs_nss_ ##i >= 0) {                           \
                vhtcaps_mask->vht_supported_mcs_set.rx_map |=           \
-                       3 << 2 * (i - 1);                               \
+                       host_to_le16(3 << 2 * (i - 1));                 \
                vhtcaps->vht_supported_mcs_set.rx_map |=                \
-                       ssid->vht_rx_mcs_nss_ ##i << 2 * (i - 1);       \
+                       host_to_le16(ssid->vht_rx_mcs_nss_ ##i <<       \
+                                    2 * (i - 1));                      \
        }
 
        OVERRIDE_MCS(1);
@@ -3994,8 +4017,9 @@ static void wpas_fst_update_mb_ie_cb(void *ctx, const u8 *addr,
 }
 
 
-const u8 * wpas_fst_get_peer_first(void *ctx, struct fst_get_peer_ctx **get_ctx,
-                                  Boolean mb_only)
+static const u8 * wpas_fst_get_peer_first(void *ctx,
+                                         struct fst_get_peer_ctx **get_ctx,
+                                         Boolean mb_only)
 {
        struct wpa_supplicant *wpa_s = ctx;
 
@@ -4007,8 +4031,9 @@ const u8 * wpas_fst_get_peer_first(void *ctx, struct fst_get_peer_ctx **get_ctx,
 }
 
 
-const u8 * wpas_fst_get_peer_next(void *ctx, struct fst_get_peer_ctx **get_ctx,
-                                 Boolean mb_only)
+static const u8 * wpas_fst_get_peer_next(void *ctx,
+                                        struct fst_get_peer_ctx **get_ctx,
+                                        Boolean mb_only)
 {
        return NULL;
 }
@@ -4849,6 +4874,8 @@ static int wpa_supplicant_init_iface(struct wpa_supplicant *wpa_s,
        wpas_mbo_update_non_pref_chan(wpa_s, wpa_s->conf->non_pref_chan);
 #endif /* CONFIG_MBO */
 
+       wpa_supplicant_set_default_scan_ies(wpa_s);
+
        return 0;
 }
 
@@ -5996,6 +6023,27 @@ void wpas_request_connection(struct wpa_supplicant *wpa_s)
 }
 
 
+/**
+ * wpas_request_disconnection - Request disconnection
+ * @wpa_s: Pointer to the network interface
+ *
+ * This function is used to request disconnection from the currently connected
+ * network. This will stop any ongoing scans and initiate deauthentication.
+ */
+void wpas_request_disconnection(struct wpa_supplicant *wpa_s)
+{
+#ifdef CONFIG_SME
+       wpa_s->sme.prev_bssid_set = 0;
+#endif /* CONFIG_SME */
+       wpa_s->reassociate = 0;
+       wpa_s->disconnected = 1;
+       wpa_supplicant_cancel_sched_scan(wpa_s);
+       wpa_supplicant_cancel_scan(wpa_s);
+       wpa_supplicant_deauthenticate(wpa_s, WLAN_REASON_DEAUTH_LEAVING);
+       eloop_cancel_timeout(wpas_network_reenabled, wpa_s, NULL);
+}
+
+
 void dump_freq_data(struct wpa_supplicant *wpa_s, const char *title,
                    struct wpa_used_freq_data *freqs_data,
                    unsigned int len)