#endif /* CONFIG_MBO */
free_bss_tmp_disallowed(wpa_s);
+
+ wpabuf_free(wpa_s->lci);
+ wpa_s->lci = NULL;
}
if (!mode)
return;
+#ifdef CONFIG_HT_OVERRIDES
+ if (ssid->disable_ht) {
+ freq->ht_enabled = 0;
+ return;
+ }
+#endif /* CONFIG_HT_OVERRIDES */
+
freq->ht_enabled = ht_supported(mode);
if (!freq->ht_enabled)
return;
if (pri_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
return;
+#ifdef CONFIG_HT_OVERRIDES
+ if (ssid->disable_ht40)
+ return;
+#endif /* CONFIG_HT_OVERRIDES */
+
/* Check/setup HT40+/HT40- */
for (j = 0; j < ARRAY_SIZE(ht40plus); j++) {
if (ht40plus[j] == channel) {
freq->channel = pri_chan->chan;
- switch (ht40) {
- case -1:
+ if (ht40 == -1) {
if (!(pri_chan->flag & HOSTAPD_CHAN_HT40MINUS))
return;
- freq->sec_channel_offset = -1;
- break;
- case 1:
+ } else {
if (!(pri_chan->flag & HOSTAPD_CHAN_HT40PLUS))
return;
- freq->sec_channel_offset = 1;
- break;
- default:
- break;
}
+ freq->sec_channel_offset = ht40;
- if (freq->sec_channel_offset && obss_scan) {
+ if (obss_scan) {
struct wpa_scan_results *scan_res;
scan_res = wpa_supplicant_get_scan_results(wpa_s, NULL, 0);
if (chwidth == VHT_CHANWIDTH_80P80MHZ)
break;
}
+ } else if (ssid->max_oper_chwidth == VHT_CHANWIDTH_160MHZ) {
+ if (freq->freq == 5180) {
+ chwidth = VHT_CHANWIDTH_160MHZ;
+ vht_caps |= VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
+ seg0 = 50;
+ } else if (freq->freq == 5520) {
+ chwidth = VHT_CHANWIDTH_160MHZ;
+ vht_caps |= VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
+ seg0 = 114;
+ }
}
if (hostapd_set_freq_params(&vht_freq, mode->mode, freq->freq,
* element in all cases, it is justifiable to skip it to avoid
* interoperability issues.
*/
+ if (ssid->p2p_group)
+ wpa_drv_get_ext_capa(wpa_s, WPA_IF_P2P_CLIENT);
+ else
+ wpa_drv_get_ext_capa(wpa_s, WPA_IF_STATION);
+
if (!bss || wpa_bss_get_ie(bss, WLAN_EID_EXT_CAPAB)) {
u8 ext_capab[18];
int ext_capab_len;
/**
+ * wpa_supplicant_add_network - Add a new network
+ * @wpa_s: wpa_supplicant structure for a network interface
+ * Returns: The new network configuration or %NULL if operation failed
+ *
+ * This function performs the following operations:
+ * 1. Adds a new network.
+ * 2. Send network addition notification.
+ * 3. Marks the network disabled.
+ * 4. Set network default parameters.
+ */
+struct wpa_ssid * wpa_supplicant_add_network(struct wpa_supplicant *wpa_s)
+{
+ struct wpa_ssid *ssid;
+
+ ssid = wpa_config_add_network(wpa_s->conf);
+ if (!ssid)
+ return NULL;
+ wpas_notify_network_added(wpa_s, ssid);
+ ssid->disabled = 1;
+ wpa_config_set_network_defaults(ssid);
+
+ return ssid;
+}
+
+
+/**
+ * wpa_supplicant_remove_network - Remove a configured network based on id
+ * @wpa_s: wpa_supplicant structure for a network interface
+ * @id: Unique network id to search for
+ * Returns: 0 on success, or -1 if the network was not found, -2 if the network
+ * could not be removed
+ *
+ * This function performs the following operations:
+ * 1. Removes the network.
+ * 2. Send network removal notification.
+ * 3. Update internal state machines.
+ * 4. Stop any running sched scans.
+ */
+int wpa_supplicant_remove_network(struct wpa_supplicant *wpa_s, int id)
+{
+ struct wpa_ssid *ssid;
+ int was_disabled;
+
+ ssid = wpa_config_get_network(wpa_s->conf, id);
+ if (!ssid)
+ return -1;
+ wpas_notify_network_removed(wpa_s, ssid);
+
+ if (wpa_s->last_ssid == ssid)
+ wpa_s->last_ssid = NULL;
+
+ if (ssid == wpa_s->current_ssid || !wpa_s->current_ssid) {
+#ifdef CONFIG_SME
+ wpa_s->sme.prev_bssid_set = 0;
+#endif /* CONFIG_SME */
+ /*
+ * Invalidate the EAP session cache if the current or
+ * previously used network is removed.
+ */
+ eapol_sm_invalidate_cached_session(wpa_s->eapol);
+ }
+
+ if (ssid == wpa_s->current_ssid) {
+ wpa_sm_set_config(wpa_s->wpa, NULL);
+ eapol_sm_notify_config(wpa_s->eapol, NULL, NULL);
+
+ if (wpa_s->wpa_state >= WPA_AUTHENTICATING)
+ wpa_s->own_disconnect_req = 1;
+ wpa_supplicant_deauthenticate(wpa_s,
+ WLAN_REASON_DEAUTH_LEAVING);
+ }
+
+ was_disabled = ssid->disabled;
+
+ if (wpa_config_remove_network(wpa_s->conf, id) < 0)
+ return -2;
+
+ if (!was_disabled && wpa_s->sched_scanning) {
+ wpa_printf(MSG_DEBUG,
+ "Stop ongoing sched_scan to remove network from filters");
+ wpa_supplicant_cancel_sched_scan(wpa_s);
+ wpa_supplicant_req_scan(wpa_s, 0, 0);
+ }
+
+ return 0;
+}
+
+
+/**
* wpa_supplicant_enable_network - Mark a configured network as enabled
* @wpa_s: wpa_supplicant structure for a network interface
* @ssid: wpa_ssid structure for a configured network or %NULL
if (!vhtcaps || !vhtcaps_mask)
return;
- vhtcaps->vht_capabilities_info = ssid->vht_capa;
- vhtcaps_mask->vht_capabilities_info = ssid->vht_capa_mask;
+ vhtcaps->vht_capabilities_info = host_to_le32(ssid->vht_capa);
+ vhtcaps_mask->vht_capabilities_info = host_to_le32(ssid->vht_capa_mask);
#ifdef CONFIG_HT_OVERRIDES
/* if max ampdu is <= 3, we have to make the HT cap the same */
#define OVERRIDE_MCS(i) \
if (ssid->vht_tx_mcs_nss_ ##i >= 0) { \
vhtcaps_mask->vht_supported_mcs_set.tx_map |= \
- 3 << 2 * (i - 1); \
+ host_to_le16(3 << 2 * (i - 1)); \
vhtcaps->vht_supported_mcs_set.tx_map |= \
- ssid->vht_tx_mcs_nss_ ##i << 2 * (i - 1); \
+ host_to_le16(ssid->vht_tx_mcs_nss_ ##i << \
+ 2 * (i - 1)); \
} \
if (ssid->vht_rx_mcs_nss_ ##i >= 0) { \
vhtcaps_mask->vht_supported_mcs_set.rx_map |= \
- 3 << 2 * (i - 1); \
+ host_to_le16(3 << 2 * (i - 1)); \
vhtcaps->vht_supported_mcs_set.rx_map |= \
- ssid->vht_rx_mcs_nss_ ##i << 2 * (i - 1); \
+ host_to_le16(ssid->vht_rx_mcs_nss_ ##i << \
+ 2 * (i - 1)); \
}
OVERRIDE_MCS(1);
}
-const u8 * wpas_fst_get_peer_first(void *ctx, struct fst_get_peer_ctx **get_ctx,
- Boolean mb_only)
+static const u8 * wpas_fst_get_peer_first(void *ctx,
+ struct fst_get_peer_ctx **get_ctx,
+ Boolean mb_only)
{
struct wpa_supplicant *wpa_s = ctx;
}
-const u8 * wpas_fst_get_peer_next(void *ctx, struct fst_get_peer_ctx **get_ctx,
- Boolean mb_only)
+static const u8 * wpas_fst_get_peer_next(void *ctx,
+ struct fst_get_peer_ctx **get_ctx,
+ Boolean mb_only)
{
return NULL;
}
wpas_mbo_update_non_pref_chan(wpa_s, wpa_s->conf->non_pref_chan);
#endif /* CONFIG_MBO */
+ wpa_supplicant_set_default_scan_ies(wpa_s);
+
return 0;
}
return NO_MGMT_FRAME_PROTECTION;
}
+ if (ssid &&
+ (ssid->key_mgmt &
+ ~(WPA_KEY_MGMT_NONE | WPA_KEY_MGMT_WPS |
+ WPA_KEY_MGMT_IEEE8021X_NO_WPA)) == 0) {
+ /*
+ * Do not use the default PMF value for non-RSN networks
+ * since PMF is available only with RSN and pmf=2
+ * configuration would otherwise prevent connections to
+ * all open networks.
+ */
+ return NO_MGMT_FRAME_PROTECTION;
+ }
+
return wpa_s->conf->pmf;
}
}
+/**
+ * wpas_request_disconnection - Request disconnection
+ * @wpa_s: Pointer to the network interface
+ *
+ * This function is used to request disconnection from the currently connected
+ * network. This will stop any ongoing scans and initiate deauthentication.
+ */
+void wpas_request_disconnection(struct wpa_supplicant *wpa_s)
+{
+#ifdef CONFIG_SME
+ wpa_s->sme.prev_bssid_set = 0;
+#endif /* CONFIG_SME */
+ wpa_s->reassociate = 0;
+ wpa_s->disconnected = 1;
+ wpa_supplicant_cancel_sched_scan(wpa_s);
+ wpa_supplicant_cancel_scan(wpa_s);
+ wpa_supplicant_deauthenticate(wpa_s, WLAN_REASON_DEAUTH_LEAVING);
+ eloop_cancel_timeout(wpas_network_reenabled, wpa_s, NULL);
+}
+
+
void dump_freq_data(struct wpa_supplicant *wpa_s, const char *title,
struct wpa_used_freq_data *freqs_data,
unsigned int len)
}
+static struct wpabuf * wpas_rrm_build_lci_report(struct wpa_supplicant *wpa_s,
+ const u8 *request, size_t len,
+ struct wpabuf *report)
+{
+ u8 token, type, subject;
+ u16 max_age = 0;
+ struct os_reltime t, diff;
+ unsigned long diff_l;
+ u8 *ptoken;
+ const u8 *subelem;
+
+ if (!wpa_s->lci || len < 3 + 4)
+ return report;
+
+ token = *request++;
+ /* Measurement request mode isn't used */
+ request++;
+ type = *request++;
+ subject = *request++;
+
+ wpa_printf(MSG_DEBUG,
+ "Measurement request token %u type %u location subject %u",
+ token, type, subject);
+
+ if (type != MEASURE_TYPE_LCI || subject != LOCATION_SUBJECT_REMOTE) {
+ wpa_printf(MSG_INFO,
+ "Not building LCI report - bad type or location subject");
+ return report;
+ }
+
+ /* Subelements are formatted exactly like elements */
+ subelem = get_ie(request, len, LCI_REQ_SUBELEM_MAX_AGE);
+ if (subelem && subelem[1] == 2)
+ max_age = WPA_GET_LE16(subelem + 2);
+
+ if (os_get_reltime(&t))
+ return report;
+
+ os_reltime_sub(&t, &wpa_s->lci_time, &diff);
+ /* LCI age is calculated in 10th of a second units. */
+ diff_l = diff.sec * 10 + diff.usec / 100000;
+
+ if (max_age != 0xffff && max_age < diff_l)
+ return report;
+
+ if (wpabuf_resize(&report, 2 + wpabuf_len(wpa_s->lci)))
+ return report;
+
+ wpabuf_put_u8(report, WLAN_EID_MEASURE_REPORT);
+ wpabuf_put_u8(report, wpabuf_len(wpa_s->lci));
+ /* We'll override user's measurement token */
+ ptoken = wpabuf_put(report, 0);
+ wpabuf_put_buf(report, wpa_s->lci);
+ *ptoken = token;
+
+ return report;
+}
+
+
+void wpas_rrm_handle_radio_measurement_request(struct wpa_supplicant *wpa_s,
+ const u8 *src,
+ const u8 *frame, size_t len)
+{
+ struct wpabuf *buf, *report;
+ u8 token;
+ const u8 *ie, *end;
+
+ if (wpa_s->wpa_state != WPA_COMPLETED) {
+ wpa_printf(MSG_INFO,
+ "RRM: Ignoring radio measurement request: Not associated");
+ return;
+ }
+
+ if (!wpa_s->rrm.rrm_used) {
+ wpa_printf(MSG_INFO,
+ "RRM: Ignoring radio measurement request: Not RRM network");
+ return;
+ }
+
+ if (len < 3) {
+ wpa_printf(MSG_INFO,
+ "RRM: Ignoring too short radio measurement request");
+ return;
+ }
+
+ end = frame + len;
+
+ token = *frame++;
+
+ /* Ignore number of repetitions because it's not used in LCI request */
+ frame += 2;
+
+ report = NULL;
+ while ((ie = get_ie(frame, end - frame, WLAN_EID_MEASURE_REQUEST)) &&
+ ie[1] >= 3) {
+ u8 msmt_type;
+
+ msmt_type = ie[4];
+ wpa_printf(MSG_DEBUG, "RRM request %d", msmt_type);
+
+ switch (msmt_type) {
+ case MEASURE_TYPE_LCI:
+ report = wpas_rrm_build_lci_report(wpa_s, ie + 2, ie[1],
+ report);
+ break;
+ default:
+ wpa_printf(MSG_INFO,
+ "RRM: Unsupported radio measurement request %d",
+ msmt_type);
+ break;
+ }
+
+ frame = ie + ie[1] + 2;
+ }
+
+ if (!report)
+ return;
+
+ buf = wpabuf_alloc(3 + wpabuf_len(report));
+ if (!buf) {
+ wpabuf_free(report);
+ return;
+ }
+
+ wpabuf_put_u8(buf, WLAN_ACTION_RADIO_MEASUREMENT);
+ wpabuf_put_u8(buf, WLAN_RRM_RADIO_MEASUREMENT_REPORT);
+ wpabuf_put_u8(buf, token);
+
+ wpabuf_put_buf(buf, report);
+ wpabuf_free(report);
+
+ if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, src,
+ wpa_s->own_addr, wpa_s->bssid,
+ wpabuf_head(buf), wpabuf_len(buf), 0)) {
+ wpa_printf(MSG_ERROR,
+ "RRM: Radio measurement report failed: Sending Action frame failed");
+ }
+ wpabuf_free(buf);
+}
+
+
void wpas_rrm_handle_link_measurement_request(struct wpa_supplicant *wpa_s,
const u8 *src,
const u8 *frame, size_t len,
projects / mech_eap.git / blobdiff