fast_reauth=1
# OpenSSL Engine support
-# These options can be used to load OpenSSL engines.
+# These options can be used to load OpenSSL engines in special or legacy
+# modes.
# The two engines that are supported currently are shown below:
# They are both from the opensc project (http://www.opensc.org/)
-# By default no engines are loaded.
+# By default the PKCS#11 engine is loaded if the client_cert or
+# private_key option appear to be a PKCS#11 URI, and these options
+# should not need to be used explicitly.
# make the opensc engine available
#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
# make the pkcs11 engine available
# Protected Management Frames default
# This parameter can be used to set the default behavior for the ieee80211w
-# parameter. By default, PMF is disabled unless enabled with the global pmf=1/2
-# parameter or with the per-network ieee80211w=1/2 parameter. With pmf=1/2, PMF
-# is enabled/required by default, but can be disabled with the per-network
-# ieee80211w parameter.
+# parameter for RSN networks. By default, PMF is disabled unless enabled with
+# the global pmf=1/2 parameter or with the per-network ieee80211w=1/2 parameter.
+# With pmf=1/2, PMF is enabled/required by default, but can be disabled with the
+# per-network ieee80211w parameter. This global default value does not apply
+# for non-RSN networks (key_mgmt=NONE) since PMF is available only when using
+# RSN.
#pmf=0
# Enabled SAE finite cyclic groups in preference order
# matching network block
#auto_interworking=0
+# GAS Address3 field behavior
+# 0 = P2P specification (Address3 = AP BSSID); default
+# 1 = IEEE 802.11 standard compliant (Address3 = Wildcard BSSID when
+# sent to not-associated AP; if associated, AP BSSID)
+#gas_address3=0
+
# credential block
#
# Each credential used for automatic network selection is configured as a set
# (EAP-TLS). Full path to the file should be used since working
# directory may change when wpa_supplicant is run in the background.
#
+# Certificates from PKCS#11 tokens can be referenced by a PKCS#11 URI.
+#
+# For example: private_key="pkcs11:manufacturer=piv_II;id=%01"
+#
# Alternatively, a named configuration blob can be used by setting
# this to blob://blob_name.
#
# used since working directory may change when wpa_supplicant is run
# in the background.
#
+# Keys in PKCS#11 tokens can be referenced by a PKCS#11 URI.
+# For example: private_key="pkcs11:manufacturer=piv_II;id=%01"
+#
# Windows certificate store can be used by leaving client_cert out and
# configuring private_key in one of the following formats:
#
# Example:
# sched_scan_plans=10:100 20:200 30
+# Multi Band Operation (MBO) non-preferred channels
+# A space delimited list of non-preferred channels where each channel is a colon
+# delimited list of values. Reason detail is optional.
+# Format:
+# non_pref_chan=<oper_class>:<chan>:<preference>:<reason>[:reason_detail]
+# Example:
+# non_pref_chan="81:5:10:2:0 81:1:0:2:0 81:9:0:2"
+
+# MBO Cellular Data Capabilities
+# 1 = Cellular data connection available
+# 2 = Cellular data connection not available
+# 3 = Not cellular capable (default)
+#mbo_cell_capa=3
+
# network block
#
# Each network (usually AP's sharing the same SSID) is configured as a separate
# an IBSS network with the configured SSID is already present, the frequency of
# the network will be used instead of this configured value.
#
+# pbss: Whether to use PBSS. Relevant to IEEE 802.11ad networks only.
+# 0 = do not use PBSS
+# 1 = use PBSS
+# 2 = don't care (not allowed in AP mode)
+# Used together with mode configuration. When mode is AP, it means to start a
+# PCP instead of a regular AP. When mode is infrastructure it means connect
+# to a PCP instead of AP. In this mode you can also specify 2 (don't care)
+# which means connect to either PCP or AP.
+# P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in IEEE 802.11ad network.
+# For more details, see IEEE Std 802.11ad-2012.
+#
# scan_freq: List of frequencies to scan
# Space-separated list of frequencies in MHz to scan when searching for this
# BSS. If the subset of channels used by the network is known, this option can
# Beacon interval (default: 100 TU)
#beacon_int=100
+# WPS in AP mode
+# 0 = WPS enabled and configured (default)
+# 1 = WPS disabled
+#wps_disabled=0
+
# MAC address policy
# 0 = use permanent MAC address
# 1 = use random MAC address for each ESS connection
group=CCMP TKIP
identity="user@example.com"
ca_cert="/etc/cert/ca.pem"
- client_cert="/etc/cert/user.pem"
-
- engine=1
-
- # The engine configured here must be available. Look at
- # OpenSSL engine support in the global section.
- # The key available through the engine must be the private key
- # matching the client certificate configured above.
-
- # use the opensc engine
- #engine_id="opensc"
- #key_id="45"
- # use the pkcs11 engine
- engine_id="pkcs11"
- key_id="id_45"
+ # Certificate and/or key identified by PKCS#11 URI (RFC7512)
+ client_cert="pkcs11:manufacturer=piv_II;id=%01"
+ private_key="pkcs11:manufacturer=piv_II;id=%01"
# Optional PIN configuration; this can be left out and PIN will be
# asked through the control interface