X-Git-Url: http://www.project-moonshot.org/gitweb/?p=mech_eap.git;a=blobdiff_plain;f=wpa_supplicant%2Fconfig.h;h=1535738979d97e8fed19a43dcf00affef84c8b78;hp=be82c3c97996999d5e2b9d9b7794a94ee26d0ccc;hb=e8afaad7fd9a7fc9a761ed2f8a117bbb6ac9c730;hpb=483dd6a5e0069d0646505c26a5194eda15472858 diff --git a/wpa_supplicant/config.h b/wpa_supplicant/config.h index be82c3c..1535738 100644 --- a/wpa_supplicant/config.h +++ b/wpa_supplicant/config.h @@ -17,6 +17,12 @@ #endif /* CONFIG_NO_SCAN_PROCESSING */ #define DEFAULT_USER_MPM 1 #define DEFAULT_MAX_PEER_LINKS 99 +#define DEFAULT_MESH_MAX_INACTIVITY 300 +/* + * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard, + * but use 1000 ms in practice to avoid issues on low power CPUs. + */ +#define DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD 1000 #define DEFAULT_FAST_REAUTH 1 #define DEFAULT_P2P_GO_INTENT 7 #define DEFAULT_P2P_INTRA_BSS 1 @@ -32,9 +38,13 @@ #define DEFAULT_RAND_ADDR_LIFETIME 60 #define DEFAULT_KEY_MGMT_OFFLOAD 1 #define DEFAULT_CERT_IN_CB 1 +#define DEFAULT_P2P_GO_CTWINDOW 0 +#define DEFAULT_WPA_RSC_RELAXATION 1 +#define DEFAULT_MBO_CELL_CAPA MBO_CELL_CAPA_NOT_SUPPORTED #include "config_ssid.h" #include "wps/wps.h" +#include "common/ieee802_11_defs.h" #include "common/ieee802_11_common.h" @@ -239,7 +249,7 @@ struct wpa_cred { char *phase2; struct excluded_ssid { - u8 ssid[MAX_SSID_LEN]; + u8 ssid[SSID_MAX_LEN]; size_t ssid_len; } *excluded_ssid; size_t num_excluded_ssid; @@ -323,6 +333,7 @@ struct wpa_cred { #define CFG_CHANGED_EXT_PW_BACKEND BIT(14) #define CFG_CHANGED_NFC_PASSWORD_TOKEN BIT(15) #define CFG_CHANGED_P2P_PASSPHRASE_LEN BIT(16) +#define CFG_CHANGED_SCHED_SCAN_PLANS BIT(17) /** * struct wpa_config - wpa_supplicant configuration data @@ -398,6 +409,11 @@ struct wpa_config { * one by one until the driver reports successful association; each * network block should have explicit security policy (i.e., only one * option in the lists) for key_mgmt, pairwise, group, proto variables. + * + * Note: ap_scan=2 should not be used with the nl80211 driver interface + * (the current Linux interface). ap_scan=1 is optimized work working + * with nl80211. For finding networks using hidden SSID, scan_ssid=1 in + * the network block can be used with nl80211. */ int ap_scan; @@ -731,6 +747,39 @@ struct wpa_config { int p2p_group_idle; /** + * p2p_go_freq_change_policy - The GO frequency change policy + * + * This controls the behavior of the GO when there is a change in the + * map of the currently used frequencies in case more than one channel + * is supported. + * + * @P2P_GO_FREQ_MOVE_SCM: Prefer working in a single channel mode if + * possible. In case the GO is the only interface using its frequency + * and there are other station interfaces on other frequencies, the GO + * will migrate to one of these frequencies. + * + * @P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS: Same as P2P_GO_FREQ_MOVE_SCM, + * but a transition is possible only in case one of the other used + * frequencies is one of the frequencies in the intersection of the + * frequency list of the local device and the peer device. + * + * @P2P_GO_FREQ_MOVE_STAY: Prefer to stay on the current frequency. + * + * @P2P_GO_FREQ_MOVE_SCM_ECSA: Same as + * P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS but a transition is possible only + * if all the group members advertise eCSA support. + */ + enum { + P2P_GO_FREQ_MOVE_SCM = 0, + P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS = 1, + P2P_GO_FREQ_MOVE_STAY = 2, + P2P_GO_FREQ_MOVE_SCM_ECSA = 3, + P2P_GO_FREQ_MOVE_MAX = P2P_GO_FREQ_MOVE_SCM_ECSA, + } p2p_go_freq_change_policy; + +#define DEFAULT_P2P_GO_FREQ_MOVE P2P_GO_FREQ_MOVE_STAY + + /** * p2p_passphrase_len - Passphrase length (8..63) for P2P GO * * This parameter controls the length of the random passphrase that is @@ -941,6 +990,14 @@ struct wpa_config { int p2p_go_vht; /** + * p2p_go_ctwindow - CTWindow to use when operating as GO + * + * By default: 0 (no CTWindow). Values 0-127 can be used to indicate + * the length of the CTWindow in TUs. + */ + int p2p_go_ctwindow; + + /** * p2p_disabled - Whether P2P operations are disabled for this interface */ int p2p_disabled; @@ -957,6 +1014,18 @@ struct wpa_config { int p2p_no_group_iface; /** + * p2p_cli_probe - Enable/disable P2P CLI probe request handling + * + * If this parameter is set to 1, a connected P2P Client will receive + * and handle Probe Request frames. Setting this parameter to 0 + * disables this option. Default value: 0. + * + * Note: Setting this property at run time takes effect on the following + * interface state transition to/from the WPA_COMPLETED state. + */ + int p2p_cli_probe; + + /** * okc - Whether to enable opportunistic key caching by default * * By default, OKC is disabled unless enabled by the per-network @@ -970,7 +1039,8 @@ struct wpa_config { * * By default, PMF is disabled unless enabled by the per-network * ieee80211w=1 or ieee80211w=2 parameter. pmf=1/2 can be used to change - * this default behavior. + * this default behavior for RSN network (this is not applicable for + * non-RSN cases). */ enum mfp_options pmf; @@ -1128,6 +1198,110 @@ struct wpa_config { * its certificate chain are included in EAP peer certificate events. */ int cert_in_cb; + + /** + * mesh_max_inactivity - Timeout in seconds to detect STA inactivity + * + * This timeout value is used in mesh STA to clean up inactive stations. + * By default: 300 seconds. + */ + int mesh_max_inactivity; + + /** + * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame + * + * This timeout value is used in mesh STA to retransmit + * SAE Authentication frame. + * By default: 1000 milliseconds. + */ + int dot11RSNASAERetransPeriod; + + /** + * passive_scan - Whether to force passive scan for network connection + * + * This parameter can be used to force only passive scanning to be used + * for network connection cases. It should be noted that this will slow + * down scan operations and reduce likelihood of finding the AP. In + * addition, some use cases will override this due to functional + * requirements, e.g., for finding an AP that uses hidden SSID + * (scan_ssid=1) or P2P device discovery. + */ + int passive_scan; + + /** + * reassoc_same_bss_optim - Whether to optimize reassoc-to-same-BSS + */ + int reassoc_same_bss_optim; + + /** + * wps_priority - Priority for the networks added through WPS + * + * This priority value will be set to each network profile that is added + * by executing the WPS protocol. + */ + int wps_priority; + + /** + * fst_group_id - FST group ID + */ + char *fst_group_id; + + /** + * fst_priority - priority of the interface within the FST group + */ + int fst_priority; + + /** + * fst_llt - default FST LLT (Link-Lost Timeout) to be used for the + * interface. + */ + int fst_llt; + + /** + * wpa_rsc_relaxation - RSC relaxation on GTK installation + * + * Values: + * 0 - use the EAPOL-Key RSC value on GTK installation + * 1 - use the null RSC if a bogus RSC value is detected in message 3 + * of 4-Way Handshake or message 1 of Group Key Handshake. + */ + int wpa_rsc_relaxation; + + /** + * sched_scan_plans - Scan plans for scheduled scan + * + * Each scan plan specifies the interval between scans and the number of + * iterations. The last scan plan only specifies the scan interval and + * will be run infinitely. + * + * format: ... + */ + char *sched_scan_plans; + +#ifdef CONFIG_MBO + /** + * non_pref_chan - Non-preferred channels list, separated by spaces. + * + * format: op_class:chan:preference:reason<:detail> + * Detail is optional. + */ + char *non_pref_chan; + + /** + * mbo_cell_capa - Cellular capabilities for MBO + */ + enum mbo_cellular_capa mbo_cell_capa; +#endif /* CONFIG_MBO */ + + /** + * gas_address3 - GAS Address3 field behavior + * + * Values: + * 0 - P2P specification (Address3 = AP BSSID) + * 1 = IEEE 802.11 standard compliant (Address3 = Wildcard BSSID when + * sent to not-associated AP; if associated, AP BSSID) + */ + int gas_address3; }; @@ -1146,6 +1320,11 @@ int wpa_config_set(struct wpa_ssid *ssid, const char *var, const char *value, int line); int wpa_config_set_quoted(struct wpa_ssid *ssid, const char *var, const char *value); +int wpa_config_dump_values(struct wpa_config *config, char *buf, + size_t buflen); +int wpa_config_get_value(const char *name, struct wpa_config *config, + char *buf, size_t buflen); + char ** wpa_config_get_all(struct wpa_ssid *ssid, int get_keys); char * wpa_config_get(struct wpa_ssid *ssid, const char *var); char * wpa_config_get_no_key(struct wpa_ssid *ssid, const char *var); @@ -1181,6 +1360,9 @@ void wpa_config_debug_dump_networks(struct wpa_config *config); /* Prototypes for common functions from config.c */ int wpa_config_process_global(struct wpa_config *config, char *pos, int line); +int wpa_config_get_num_global_field_names(void); + +const char * wpa_config_get_global_field_name(unsigned int i, int *no_var); /* Prototypes for backend specific functions from the selected config_*.c */