X-Git-Url: http://www.project-moonshot.org/gitweb/?p=mech_eap.git;a=blobdiff_plain;f=wpa_supplicant%2Fconfig_ssid.h;h=1ecdfc0994db8fa24a226c09f77a7a5911d13e50;hp=be83cc28ea2b2f3c35a9b2e9eeff5095275d82f6;hb=e8afaad7fd9a7fc9a761ed2f8a117bbb6ac9c730;hpb=ec947ffcd8d22fb03da9e6519e910f91f044ad06

diff --git a/wpa_supplicant/config_ssid.h b/wpa_supplicant/config_ssid.h
index be83cc2..1ecdfc0 100644
--- a/wpa_supplicant/config_ssid.h
+++ b/wpa_supplicant/config_ssid.h
@@ -1,6 +1,6 @@
 /*
  * WPA Supplicant / Network configuration structures
- * Copyright (c) 2003-2008, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi>
  *
  * This software may be distributed under the terms of the BSD license.
  * See README for more details.
@@ -10,10 +10,9 @@
 #define CONFIG_SSID_H
 
 #include "common/defs.h"
+#include "utils/list.h"
 #include "eap_peer/eap_config.h"
 
-#define MAX_SSID_LEN 32
-
 
 #define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
 #define DEFAULT_EAPOL_FLAGS (EAPOL_FLAG_REQUIRE_KEY_UNICAST | \
@@ -21,16 +20,29 @@
 #define DEFAULT_PROTO (WPA_PROTO_WPA | WPA_PROTO_RSN)
 #define DEFAULT_KEY_MGMT (WPA_KEY_MGMT_PSK | WPA_KEY_MGMT_IEEE8021X)
 #define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
-#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP | \
-		       WPA_CIPHER_WEP104 | WPA_CIPHER_WEP40)
+#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
 #define DEFAULT_FRAGMENT_SIZE 1398
 
 #define DEFAULT_BG_SCAN_PERIOD -1
+#define DEFAULT_MESH_MAX_RETRIES 2
+#define DEFAULT_MESH_RETRY_TIMEOUT 40
+#define DEFAULT_MESH_CONFIRM_TIMEOUT 40
+#define DEFAULT_MESH_HOLDING_TIMEOUT 40
 #define DEFAULT_DISABLE_HT 0
 #define DEFAULT_DISABLE_HT40 0
+#define DEFAULT_DISABLE_SGI 0
+#define DEFAULT_DISABLE_LDPC 0
 #define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */
 #define DEFAULT_AMPDU_FACTOR -1 /* no change */
 #define DEFAULT_AMPDU_DENSITY -1 /* no change */
+#define DEFAULT_USER_SELECTED_SIM 1
+
+struct psk_list_entry {
+	struct dl_list list;
+	u8 addr[ETH_ALEN];
+	u8 psk[32];
+	u8 p2p;
+};
 
 /**
  * struct wpa_ssid - Network configuration data
@@ -117,11 +129,28 @@ struct wpa_ssid {
 	u8 bssid[ETH_ALEN];
 
 	/**
+	 * bssid_blacklist - List of inacceptable BSSIDs
+	 */
+	u8 *bssid_blacklist;
+	size_t num_bssid_blacklist;
+
+	/**
+	 * bssid_blacklist - List of acceptable BSSIDs
+	 */
+	u8 *bssid_whitelist;
+	size_t num_bssid_whitelist;
+
+	/**
 	 * bssid_set - Whether BSSID is configured for this network
 	 */
 	int bssid_set;
 
 	/**
+	 * go_p2p_dev_addr - GO's P2P Device Address or all zeros if not set
+	 */
+	u8 go_p2p_dev_addr[ETH_ALEN];
+
+	/**
 	 * psk - WPA pre-shared key (256 bits)
 	 */
 	u8 psk[32];
@@ -149,6 +178,14 @@ struct wpa_ssid {
 	char *ext_psk;
 
 	/**
+	 * mem_only_psk - Whether to keep PSK/passphrase only in memory
+	 *
+	 * 0 = allow psk/passphrase to be stored to the configuration file
+	 * 1 = do not store psk/passphrase to the configuration file
+	 */
+	int mem_only_psk;
+
+	/**
 	 * pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_*
 	 */
 	int pairwise_cipher;
@@ -188,7 +225,9 @@ struct wpa_ssid {
 	 *
 	 * scan_ssid can be used to scan for APs using hidden SSIDs.
 	 * Note: Many drivers do not support this. ap_mode=2 can be used with
-	 * such drivers to use hidden SSIDs.
+	 * such drivers to use hidden SSIDs. Note2: Most nl80211-based drivers
+	 * do support scan_ssid=1 and that should be used with them instead of
+	 * ap_scan=2.
 	 */
 	int scan_ssid;
 
@@ -228,13 +267,18 @@ struct wpa_ssid {
 	 *
 	 * This field can be used to enable proactive key caching which is also
 	 * known as opportunistic PMKSA caching for WPA2. This is disabled (0)
-	 * by default. Enable by setting this to 1.
+	 * by default unless default value is changed with the global okc=1
+	 * parameter. Enable by setting this to 1.
 	 *
 	 * Proactive key caching is used to make supplicant assume that the APs
 	 * are using the same PMK and generate PMKSA cache entries without
 	 * doing RSN pre-authentication. This requires support from the AP side
 	 * and is normally used with wireless switches that co-locate the
 	 * authenticator.
+	 *
+	 * Internally, special value -1 is used to indicate that the parameter
+	 * was not specified in the configuration (i.e., default behavior is
+	 * followed).
 	 */
 	int proactive_key_caching;
 
@@ -296,12 +340,15 @@ struct wpa_ssid {
 	 * 4 = P2P Group Formation (used internally; not in configuration
 	 * files)
 	 *
-	 * Note: IBSS can only be used with key_mgmt NONE (plaintext and
-	 * static WEP) and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In
-	 * addition, ap_scan has to be set to 2 for IBSS. WPA-None requires
-	 * following network block options: proto=WPA, key_mgmt=WPA-NONE,
-	 * pairwise=NONE, group=TKIP (or CCMP, but not both), and psk must also
-	 * be set (either directly or using ASCII passphrase).
+	 * 5 = Mesh
+	 *
+	 * Note: IBSS can only be used with key_mgmt NONE (plaintext and static
+	 * WEP) and WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE
+	 * (fixed group key TKIP/CCMP) is available for backwards compatibility,
+	 * but its use is deprecated. WPA-None requires following network block
+	 * options: proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or
+	 * CCMP, but not both), and psk must also be set (either directly or
+	 * using ASCII passphrase).
 	 */
 	enum wpas_mode {
 		WPAS_MODE_INFRA = 0,
@@ -309,9 +356,23 @@ struct wpa_ssid {
 		WPAS_MODE_AP = 2,
 		WPAS_MODE_P2P_GO = 3,
 		WPAS_MODE_P2P_GROUP_FORMATION = 4,
+		WPAS_MODE_MESH = 5,
 	} mode;
 
 	/**
+	 * pbss - Whether to use PBSS. Relevant to DMG networks only.
+	 * 0 = do not use PBSS
+	 * 1 = use PBSS
+	 * 2 = don't care (not allowed in AP mode)
+	 * Used together with mode configuration. When mode is AP, it
+	 * means to start a PCP instead of a regular AP. When mode is INFRA it
+	 * means connect to a PCP instead of AP. In this mode you can also
+	 * specify 2 (don't care) meaning connect to either AP or PCP.
+	 * P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in DMG network.
+	 */
+	int pbss;
+
+	/**
 	 * disabled - Whether this network is currently disabled
 	 *
 	 * 0 = this network can be used (default).
@@ -356,6 +417,12 @@ struct wpa_ssid {
 	 *
 	 * This value is used to configure policy for management frame
 	 * protection (IEEE 802.11w). 0 = disabled, 1 = optional, 2 = required.
+	 * This is disabled by default unless the default value has been changed
+	 * with the global pmf=1/2 parameter.
+	 *
+	 * Internally, special value 3 is used to indicate that the parameter
+	 * was not specified in the configuration (i.e., default behavior is
+	 * followed).
 	 */
 	enum mfp_options ieee80211w;
 #endif /* CONFIG_IEEE80211W */
@@ -372,8 +439,45 @@ struct wpa_ssid {
 	 */
 	int frequency;
 
+	/**
+	 * fixed_freq - Use fixed frequency for IBSS
+	 */
+	int fixed_freq;
+
+#ifdef CONFIG_ACS
+	/**
+	 * ACS - Automatic Channel Selection for AP mode
+	 *
+	 * If present, it will be handled together with frequency.
+	 * frequency will be used to determine hardware mode only, when it is
+	 * used for both hardware mode and channel when used alone. This will
+	 * force the channel to be set to 0, thus enabling ACS.
+	 */
+	int acs;
+#endif /* CONFIG_ACS */
+
+	/**
+	 * mesh_basic_rates - BSS Basic rate set for mesh network
+	 *
+	 */
+	int *mesh_basic_rates;
+
+	/**
+	 * Mesh network plink parameters
+	 */
+	int dot11MeshMaxRetries;
+	int dot11MeshRetryTimeout; /* msec */
+	int dot11MeshConfirmTimeout; /* msec */
+	int dot11MeshHoldingTimeout; /* msec */
+
 	int ht40;
 
+	int vht;
+
+	u8 max_oper_chwidth;
+
+	unsigned int vht_center_freq2;
+
 	/**
 	 * wpa_ptk_rekey - Maximum lifetime for PTK in seconds
 	 *
@@ -444,6 +548,11 @@ struct wpa_ssid {
 #endif /* P2P_MAX_STORED_CLIENTS */
 
 	/**
+	 * psk_list - Per-client PSKs (struct psk_list_entry)
+	 */
+	struct dl_list psk_list;
+
+	/**
 	 * p2p_group - Network generated as a P2P group (used internally)
 	 */
 	int p2p_group;
@@ -484,6 +593,27 @@ struct wpa_ssid {
 	int disable_ht40;
 
 	/**
+	 * disable_sgi - Disable SGI (Short Guard Interval) for this network
+	 *
+	 * By default, use it if it is available, but this can be configured
+	 * to 1 to have it disabled.
+	 */
+	int disable_sgi;
+
+	/**
+	 * disable_ldpc - Disable LDPC for this network
+	 *
+	 * By default, use it if it is available, but this can be configured
+	 * to 1 to have it disabled.
+	 */
+	int disable_ldpc;
+
+	/**
+	 * ht40_intolerant - Indicate 40 MHz intolerant for this network
+	 */
+	int ht40_intolerant;
+
+	/**
 	 * disable_max_amsdu - Disable MAX A-MSDU
 	 *
 	 * A-MDSU will be 3839 bytes when disabled, or 7935
@@ -514,6 +644,35 @@ struct wpa_ssid {
 	char *ht_mcs;
 #endif /* CONFIG_HT_OVERRIDES */
 
+#ifdef CONFIG_VHT_OVERRIDES
+	/**
+	 * disable_vht - Disable VHT (IEEE 802.11ac) for this network
+	 *
+	 * By default, use it if it is available, but this can be configured
+	 * to 1 to have it disabled.
+	 */
+	int disable_vht;
+
+	/**
+	 * vht_capa - VHT capabilities to use
+	 */
+	unsigned int vht_capa;
+
+	/**
+	 * vht_capa_mask - mask for VHT capabilities
+	 */
+	unsigned int vht_capa_mask;
+
+	int vht_rx_mcs_nss_1, vht_rx_mcs_nss_2,
+	    vht_rx_mcs_nss_3, vht_rx_mcs_nss_4,
+	    vht_rx_mcs_nss_5, vht_rx_mcs_nss_6,
+	    vht_rx_mcs_nss_7, vht_rx_mcs_nss_8;
+	int vht_tx_mcs_nss_1, vht_tx_mcs_nss_2,
+	    vht_tx_mcs_nss_3, vht_tx_mcs_nss_4,
+	    vht_tx_mcs_nss_5, vht_tx_mcs_nss_6,
+	    vht_tx_mcs_nss_7, vht_tx_mcs_nss_8;
+#endif /* CONFIG_VHT_OVERRIDES */
+
 	/**
 	 * ap_max_inactivity - Timeout in seconds to detect STA's inactivity
 	 *
@@ -529,6 +688,11 @@ struct wpa_ssid {
 	int dtim_period;
 
 	/**
+	 * beacon_int - Beacon interval (default: 100 TU)
+	 */
+	int beacon_int;
+
+	/**
 	 * auth_failures - Number of consecutive authentication failures
 	 */
 	unsigned int auth_failures;
@@ -536,7 +700,62 @@ struct wpa_ssid {
 	/**
 	 * disabled_until - Network block disabled until this time if non-zero
 	 */
-	struct os_time disabled_until;
+	struct os_reltime disabled_until;
+
+	/**
+	 * parent_cred - Pointer to parent wpa_cred entry
+	 *
+	 * This pointer can be used to delete temporary networks when a wpa_cred
+	 * that was used to create them is removed. This pointer should not be
+	 * dereferences since it may not be updated in all cases.
+	 */
+	void *parent_cred;
+
+#ifdef CONFIG_MACSEC
+	/**
+	 * macsec_policy - Determines the policy for MACsec secure session
+	 *
+	 * 0: MACsec not in use (default)
+	 * 1: MACsec enabled - Should secure, accept key server's advice to
+	 *    determine whether to use a secure session or not.
+	 */
+	int macsec_policy;
+#endif /* CONFIG_MACSEC */
+
+#ifdef CONFIG_HS20
+	int update_identifier;
+#endif /* CONFIG_HS20 */
+
+	unsigned int wps_run;
+
+	/**
+	 * mac_addr - MAC address policy
+	 *
+	 * 0 = use permanent MAC address
+	 * 1 = use random MAC address for each ESS connection
+	 * 2 = like 1, but maintain OUI (with local admin bit set)
+	 *
+	 * Internally, special value -1 is used to indicate that the parameter
+	 * was not specified in the configuration (i.e., default behavior is
+	 * followed).
+	 */
+	int mac_addr;
+
+	/**
+	 * no_auto_peer - Do not automatically peer with compatible mesh peers
+	 *
+	 * When unset, the reception of a beacon from a another mesh peer in
+	 * this MBSS will trigger a peering attempt.
+	 */
+	int no_auto_peer;
+
+	/**
+	 * wps_disabled - WPS disabled in AP mode
+	 *
+	 * 0 = WPS enabled and configured (default)
+	 * 1 = WPS disabled
+	 */
+	int wps_disabled;
 };
 
 #endif /* CONFIG_SSID_H */