X-Git-Url: http://www.project-moonshot.org/gitweb/?p=mech_eap.git;a=blobdiff_plain;f=wpa_supplicant%2Ftodo.txt;h=4c9f98e9c7abadff77ec9771d4983b642c51f081;hp=e6487b0e8afd286860de19ef0166e86979ef4bb4;hb=6013bbe04f138f7d5d750a3e1939732cbde0426a;hpb=6fc6879bd55a394f807cbbe927df736c190cb8ab

diff --git a/wpa_supplicant/todo.txt b/wpa_supplicant/todo.txt
index e6487b0..4c9f98e 100644
--- a/wpa_supplicant/todo.txt
+++ b/wpa_supplicant/todo.txt
@@ -1,15 +1,10 @@
 To do:
-- hostap: try other roaming modes
-  NOTE: current mode (manual roaming) does not really roam at all..
-  Firmware did not notice the current AP disappearing..
 - add support for WPA with ap_scan=0 (update selected cipher etc. based on
   AssocInfo; make sure these match with configuration)
 - consider closing smart card / PCSC connection when EAP-SIM/EAP-AKA
   authentication has been completed (cache scard data based on serial#(?)
   and try to optimize next connection if the same card is present for next
   auth)
-- on disconnect event, could try to associate with another AP if one is
-  present in scan results; would need to update scan results periodically..
 - if driver/hw is not WPA2 capable, must remove WPA_PROTO_RSN flag from
   ssid->proto fields to avoid detecting downgrade attacks when the driver
   is not reporting RSN IE, but msg 3/4 has one
@@ -27,16 +22,12 @@ To do:
   RFC 3748 Sect. 4.2
 - test compilation with gcc -W options (more warnings?)
   (Done once; number of unused function arguments still present)
-- add proper support for using dot11RSNAConfigSATimeout
-- ctrl_iface: get/set/remove blob
+- ctrl_iface: get/remove blob
 - use doc/docbook/*.sgml and docbook2{txt,html,pdf} to replace README and
   web pages including the same information.. i.e., have this information only
   in one page; how to build a PDF file with all the SGML included?
 - EAP-POTP/RSA SecurID profile (RFC 4793)
 - document wpa_gui build and consider adding it to 'make install'
-- test madwifi with pairwise=TKIP group=WEP104
-- possibility to link in WPA Authenticator state machine to wpa_supplicant
-  (new PeerKey handshake, WPA2/IEEE 802.11 (RSN) IBSS)
 - consider merging hostapd and wpa_supplicant PMKSA cache implementations
 - consider redesigning pending EAP requests (identity/password/otp from
   ctrl_iface) by moving the retrying of the previous request into EAP
@@ -59,32 +50,26 @@ To do:
   could very well be done before EAP has been started
 - try to work around race in receiving association event and first EAPOL
   message
-- helper function to do memcmp(addr, "\x00\x00\x00\x00\x00\x00", ETH_ALEN)
-- add wpa_secure_memzero() macro and secure implementation (volatile u8*) to
-  clear memory; this would be used to clear temporary buffers containing
-  private data (e.g., keys); the macro can be defined to NOP in order to save
-  space (i.e., no code should depend on the macro doing something)
+- try to work around race in configuring PTK and sending msg 4/4 (some NDIS
+  drivers with ndiswrapper end up not being able to complete 4-way handshake
+  in some cases; extra delay before setting the key seems to help)
 - make sure that TLS session cache is not shared between EAP types or if it
   is, that the cache entries are bound to only one EAP type; e.g., cache entry
   created with EAP-TLS must not be allowed to do fast re-auth with EAP-TTLS
-- consider moving eap_tls_build_ack() call into eap_tls_process_helper()
+- consider moving eap_peer_tls_build_ack() call into
+  eap_peer_tls_process_helper()
   (it seems to be called always if helper returns 1)
   * could need to modify eap_{ttls,peap,fast}_decrypt to do same
 - add support for fetching full user cert chain from Windows certificate
   stores even when there are intermediate CA certs that are not in the
   configured ca_cert store (e.g., ROOT) (they could be, e.g., in CA store)
-
-
-0.6.x branch:
 - clean up common.[ch]
 - change TLS/crypto library interface to use a structure of function
   pointers and helper inline functions (like driver_ops) instead of
   requiring every TLS wrapper to implement all functions
 - add support for encrypted configuration fields (e.g., password, psk,
   passphrase, pin)
-- wpa_gui: add support for setting and showing priority, auth_alg
-  (open/shared for static WEP)
-
+- wpa_gui: add support for setting and showing priority
 - cleanup TLS/PEAP/TTLS/FAST fragmentation: both the handshake and Appl. Data
   phases should be able to use the same functions for this;
   the last step in processing sent should be this code and rest of the code