From: Linus Nordberg Date: Fri, 11 Jun 2010 15:30:58 +0000 (+0200) Subject: Split README into README and THANKS. X-Git-Tag: radsecproxy-1.4~12 X-Git-Url: http://www.project-moonshot.org/gitweb/?p=radsecproxy.git;a=commitdiff_plain;h=6d3c3558913b01fbcad4ee7f2e55f7d6ab95d1bb Split README into README and THANKS. Rewrite AUTHORS. --- diff --git a/AUTHORS b/AUTHORS index 810b3f9..2e615e8 100644 --- a/AUTHORS +++ b/AUTHORS @@ -1 +1,18 @@ -Stig Venaas +Radsecproxy was written by Stig Venaas . + +Radsecproxy is currently being maintained by Linus Nordberg +. + +The following people have contributed to Radsecproxy in one way or +another: +Kolbjørn Barmen +Simon Leinen +Linus Nordberg +Ralf Paffrath +Arne Schwabe +Andreas Solberg +Milan Sova +Stig Venaas +Stefan Winter +Maja Wolniewicz +Hans Zandbelt diff --git a/README b/README index c038cf0..6646a03 100644 --- a/README +++ b/README @@ -1,49 +1,29 @@ This is radsecproxy 1.4.1 from June 11 2010. -radsecproxy is a generic RADIUS proxy that can support various -RADIUS clients over UDP or TLS (RadSec). +radsecproxy is a generic RADIUS proxy that can support various RADIUS +clients over UDP or TLS (RadSec). It should build on most Linux and BSD platforms by simply typing -"make". You may also try to use autoconf. It is possible to -specify which RADIUS transport the build should support. With -just doing "make" one will support only UDP and TLS. See the -Makefile for how to change this. With autoconf (configure) there -will normally be support for all transport. You can use the -configure options --enable-udp, --enable-tcp, --enable-tls and ---enable-dtls where each of them may be set to yes or no to -enable or disable them. - -To use it you need to create a config file which normally is -called "/etc/radsecproxy.conf". You can also specify the location -with the "-c" command line option (see below). For further +"./configure && make". It is possible to specify which RADIUS +transport the build should support. Without any special options to +configure, all transports supported by the system will be enabled. +See the output from "configure --help" for how to change this. + +To use radsecproxy you need to create a config file which normally is +called "/etc/radsecproxy.conf". You can also specify the location +with the "-c" command line option (see below). For further instructions, please see the enclosed example file and the documentation at http://software.uninett.no/radsecproxy/?page=documentation -There are five options that may be specified on the command line. -"-c configfile" to specify a non-default config file path; +There are five options that may be specified on the command line: +"-c configfile" to specify a non-default config file path. "-d loglevel" to set a loglevel of 1, 2, 3, 4 and 5 where 5 is the -most detailed; and "-f" to run the proxy in the foreground with logging -to stderr. Without "-f" the default is to detach as a daemon and -log to syslog. "-v" just prints version information and exits, while + most detailed. +"-f" to run the proxy in the foreground with logging to stderr. + Without "-f" the default is to detach as a daemon and log to + syslog. +"-v" just prints version information and exits. "-p" (pretend) makes the proxy go through the configuration files as -normal, but stops before creating any sockets or doing any serious -work. This is useful for validating config files. - -Thanks to Stefan Winter and Andreas Solberg for talking me into -doing this, and the funding from GEANT2. Stefan as well as Kolbjørn -Barmen, Ralf Paffrath and Maja Wolniewicz have helped with early -testing of the code. - -Thanks for contributing code goes to Arne Schwabe, Maja Wolniewicz, -Simon Leinen and Stefan Winter. - -All of the above plus Milan Sova have provided good feedback on -several implementation choices. Finally thanks to Hans Zandbelt -for providing the autoconf stuff. I may have forgotten someone, -let me know if you feel left out. - -For more information, feedback etc. please see the information -at http://software.uninett.no/radsecproxy/ - -Stig Venaas -- 2009.07.22 + normal, but stops before creating any sockets or doing any + serious work. This is useful for validating config files. diff --git a/THANKS b/THANKS new file mode 100644 index 0000000..26eef23 --- /dev/null +++ b/THANKS @@ -0,0 +1,17 @@ +Thanks to Stefan Winter and Andreas Solberg for talking me into doing +this, and the funding from GEANT2. Stefan as well as Kolbjørn Barmen, +Ralf Paffrath and Maja Wolniewicz have helped with early testing of +the code. + +Thanks for contributing code goes to Arne Schwabe, Maja Wolniewicz, +Simon Leinen and Stefan Winter. + +All of the above plus Milan Sova have provided good feedback on +several implementation choices. Finally thanks to Hans Zandbelt for +providing the autoconf stuff. I may have forgotten someone, let me +know if you feel left out. + +For more information, feedback etc. please see the information at +http://software.uninett.no/radsecproxy/ + +Stig Venaas -- 2009.07.22