1 FreeRADIUS 3.0.13 Mon 06 Mar 2017 13:00:00 EDT urgency=medium
3 * Add dictionary.rfc7930. Note that we do not implement
5 * Added 'cipher_server_preference' to mods-available/eap
7 * OpenSSL 1.1.0 compatibility fixes.
8 * rlm_perl: radiusd::xlat to evaluate xlat string
10 * Allow authentication retry in winbind. Patch from
11 Herwin Weststrate. See raddb/mods-available/mschap.
12 * Added "recv-coa" method to rlm_rest. It behaves the
14 * Document Trust Router tr_port option. Patch from
16 * Update elasticsearch/logstash examples so that they work
17 with elastic stack v5. Patch from Matthew Newton.
18 * Print information about packets, replies, and contents
19 in the detail file reader.
20 * Update abfab-tr policy. Pull request #1893
22 * Reject packets which contain User-Password and
24 * Add example for filtering Access-Challenge.
25 See sites-enabled/default.
26 * Pull symlink fixes from v4.0.x. Fixes #1859.
27 * Add systemd reload. Not everything is reloaded, but
29 * Better documentation for listen "ipaddr". Fixes #1921
30 * Add dictionary.cnergee, updated dictionary.nomadix.
31 * radclient no longer needs -x to print statistics with -s.
34 * Minor typos. Fixes #1763
35 * Fix typo in RPM build. Closes #1767.
36 * rlm_mschap check for password expiry only
37 if password was correct. Fixes #1762.
38 * Update debian build.
39 * update rlm_counter "man" page. Fixes #1775.
40 * Remove erroneous assert. Fixes #1778.
41 * fix mschap password change test. Fixes #1792.
42 * Cleanup config file on data remove. Fixes #1795.
43 * passwd module returns "notfound" if not found.
44 * Check for old OpenSSL, and don't build rlm_eap_fast
45 if it necessary. Fixes #1803
46 * Cleanup memory better after ldap version query.
47 Patch from Aleksey Katargin.
48 * Rename lt_* functions to avoid linker issues with
50 * Many miscellaneous fixes and typos.
51 * Allow long strings in %{%{foo} bar:-%{baz} blah".
53 * Fix filtering operators, along with more documentation and
55 * Fix OpenSSL fixes. Fixes #1876.
56 * Finish SQL select queries even when SELECT returns no rows.
58 * Set Module-Failure-Message for more EAP errors.
59 * Correct typo in dictionary.rfc5580. Fixes #1882
60 * Remove obselete systemd syslog.target.
61 * Client-Port-Balance load-balancing now uses client port.
62 * Radrelay examples fixed from Alex Clouter.
63 * Update systemd target. Pull request #1896.
64 * Trim starting whitespace in xlat strings.
65 * Get MySQL result lengths using normal API.
66 * suid down after fchown(). Fixes #1914.
67 * Fix cases of comparing pointer to NUL character. Fixes #1915.
68 * OpenSSL v1.1 fixes. Pull request #1921.
69 * Better Handle v4/v6 host names. Pull request #1919.
70 * Remove "Auth-Type = System" from docs and examples.
71 * Don't crash on malformed %{home_server}. Fixes #1922
72 * fix erroneous use of talloc destructor in rlm_eap
73 * Issue trigger modules.sql.fail. Fixes #1923
74 * Document python_path gotcha's. Fixes #1845
75 * dlopen() the specific version of Python. Fixes #1592
77 FreeRADIUS 3.0.12 Thur 29 Sep 2016 13:00:00 EDT urgency=medium
79 * Add support for =~ and !~ in update sections.
81 * Add dictionary.checkpoint.
82 * Simultaneous-Use prints out more information.
83 * Print WARNING in debug mode when packets may be
85 * Added expansions %{home_server:state} and
86 %{home_server_pool:state}, which show the
87 state of the server / pool.
88 * Mark rlm_sql_freetds as stable.
89 * Make rlm_perl less fragile. Patch from
91 * Allow extended attributes to have "encrypt=2"
92 * Update dictionary.aruba.
93 * Add support for EAP-FAST. This is an isolated
94 feature which does not affect anything else.
95 * Update OpenSSL vulnerability list. Use a version
96 of OpenSSL released after September 20, 2016.
97 * EAP certificate verification is now done when
98 "verify" is enabled and "ocsp" is disabled.
99 * New dhcpclient and rlm_rad_counter man pages.
100 * Minor abfab and moonshot additions.
101 * Pass CFLAGS through from environment in RPM builds.
102 Allows more custom builds.
103 * Build with Heimdal in addition to libkrb5.
106 * Use correct typedef for older versions of sqlite.
107 * Update mssql schema to add priority
108 * Don't complain on /dev/urandom in ldap
109 * Fix == operator in update sections
110 * Don't create DHCP strings with many trailing zeros.
111 Patch from Nicolas C. Fixes #1526.
112 * Allow MS-CHAP change passwords instead of complaining
114 * Allow assignment or equality operator on SQL.
115 * Update aclocal tests for FreeBSD 10. Patches from
117 * Remove occasional hang in rlm_linelog.
118 * Copy VSAs to inner tunnel for TTLS and PEAP.
120 * A few minor bugfixes caught in v3.1.x cleanup, and
121 back-ported to v3.0.x.
122 * do_not_respond again works in post-proxy
123 * Allow realm "~^.*$" {} and User-Name with no realm.
124 * Fix leak when creating unknown attributes
125 * Fix Debian / logrotate.
126 * Make OpenSSL error functions thread-safe.
127 * Fix crash with rlm_sql and updating SQL-User-Name.
128 * Debian build updates.
129 * Allow regular expression comparisons in radclient
131 * Fix memory leak on unknown attributes in detail file
133 * Update example paths in "man" pages when installing
135 * Build fixes for rlm_mschap. Fixes #1489.
136 * BSD build fixes. Patch from issue #1583.
137 * Be more careful about /lib/ when building.
139 * Correct ifdef placement error. Fixes #1572.
140 * Allow for more files in internal "exfile" API
141 So it will be possible to open more than 64
142 "detail" files at the same time.
143 * Remove support for statically built EAP modules.
145 * Many fixes to rlm_python from Guillaume Pannatier.
146 * Use correct week adjustment in SQLcounter.
148 * Minor fixes to allow compilation without DHCP,
150 * Fix checks for module / config file change on HUP.
151 * Compile regex comparisons when sent via
152 "debug condition". Fixes #1632.
153 * Update filenames in documentation and examples.
154 Patch from Alan Buxey, #1655.
155 * Don't crash if SQL connection becomes unavailable.
157 * Disallow originate_coa when proxy_requests = no
159 * Free rad_perlconf_hv in correct perl context.
161 * Multiple fixes for Debian builds. #1510, among
163 * Set OpenSSL FIPS compatibility flag when necessary.
164 * Pulled fixes for the build system over from other
166 * Fix OCSP for RADIUS over TLS.
167 * Fix skip_if_ocsp_ok behavior.
168 * Better fixes for systems without closefrom() but
169 which have /proc. Fixes #1757.
170 * Minor build fixes back-ported from v4.0.x.
171 * build --whout-ascend-binary. Fixes #1761.
172 * Be more aggressive about not opening new connections
173 in debug mode after CTRL-C. Address #1604.
175 FreeRADIUS 3.0.11 Mon 25 Jan 2016 14:00:00 EST urgency=medium
177 * "unlang" comparisons of IP addresses to IP prefixes
178 are now detected, and types automatically cast.
179 * Allow shorthand form of ipv4prefix values e.g. 127/8.
180 * Add "auto_chain" to raddb/mods-available/eap, tls
181 subsection. This allows the disabling of OpenSSL
182 auto-chaining of certificates. Which might be wrong.
183 * Added printing of coa and disconnect stats (radmin).
184 * radclient defaults to expecting Access-Accept responses
186 * Updated dictionary.lancom, dictionary.starent.
187 * Portability fixes for Solaris.
188 * More errors from ntlm_auth gets passed to MS-CHAP.
189 * Update abfab-tr-idp virtual server.
190 * Added "filter_password" in policy.d/filter. This
191 removes embedded zero bytes in User-Password, for
192 compatibility with broken clients.
193 * The server now issues a WARNING message if duplicate
194 configuration items are found.
195 * TLS can skip the "verify" section if OCSP returns OK.
196 See raddb/mods-available/eap, "skip_if_ocsp_ok".
197 * Set TLS-OCSP-Cert-Valid = yes / no / skipped, which
198 is the result from the OCSP check.
199 * Interoperate with AD and "LmCompatibiltyLevel = 5",
200 by always setting WBC_MSV1_0_ALLOW_MSVCHAPV2 for
201 native winbind in rlm_mschap.
202 * TTLS and PEAP now require "virtual_server" to be a real server.
203 * Print WARNING when TTLS or PEAP identities are spoofed
204 or not properly anonymized. See RFC 7542 for requirements.
205 * Various rlm_python fixes from Herwin Weststrate.
206 * Allow setting Response-Packet-Type in "Post-Proxy-Type Fail",
207 which is useful when the home server does not respond.
208 * elasticsearch updates from Matthew Newton
211 * Fix issue where field nas_type would not be accessible via
212 the %{client:} xlat, for clients loaded from SQL.
213 * Fix compatiblity issues with OpenSSL 1.0.2. Ignore
214 calls to msg_callback with 'pseudo' content types.
215 * Data type "ipv4prefix" is parsed correctly.
216 * Use correct talloc context in rlm_exec. Fixes #1338.
217 * Complain in unlang if "else" is used with no previous
219 * Send accounting status packets to the accounting port.
221 * Print out CFLAGS when doing "radiusd -Xxv"
222 * Fixed bug with coa/acct stats value #1339. Based on patch from
224 * Fixes for LEAP proxying. Don't use LEAP!
225 * Fix issue with "directory already exists" seen when doing
227 * Fixed bug with radmin related to the option "stats detail <filename>"
228 * Complain if the detail file reader does not have permission
229 to read the "detail.work" file. Fixes #1398
230 * Fixed SoH. Attributes were not being copied to the virtual server.
231 * Used a wrong list to global statistics in "stats".
232 * Create EAP-PWD identity correctly. Prevents segfaults.
233 * Dynamically validate authentication types for PEAP and EAP-MSCHAPv2.
234 * Fix includes in installed headers.
235 * OpenSSL 1.0.1f and 1.0.1g do NOT calculate TLS 1.2 keys correctly.
236 See raddb/mods-available/eap, "disable_tlsv1_2"
237 * Allow password change to work for MS-CHAP. This requires 'r=0',
238 because password changes are not retries.
239 * Fix home server fail-over for home servers using TCP and/or RadSec.
240 * Special characters in expanded regexes are now escaped
241 e.g. User-Name containing '.', and comparing /%{User-Name}/,
242 the '.' will now be escaped. See src/tests/keywords/regex-escape.
243 * Use correct authentication vector when sending Access-Reject replies
245 * Set FreeRADIUS-Proxied-To in TTLS again. You should use the
246 "inner-tunnel" virtual server, instead of relying on this attribute.
247 * Fix debugging constants in rlm_perl. Patch from Herwin Weststrate.
248 * Add samba-dev / samba4-dev to debian builds so that rlm_mschap can
249 automatically use the new winbind API.
250 * Automatically skip zero-length attributes when sending packets,
251 instead of erroring out.
253 FreeRADIUS 3.0.10 Mon 05 Oct 2015 15:00:00 EDT urgency=medium
255 * Do more optimization of unlang policies. This makes
256 run-time a bit faster.
257 * Re-name most of the functions in src/lib. Third-party
258 module authors will have to do the same.
259 * More documentation on contributing and how to write
261 * Update radiusd.service for systemd.
262 * Open IPv6 proxy socket if the server is listening on IPV6
263 auth / acct / coa packets.
264 * Create debian packages for DHCP. Fixes #1125.
265 * Add more tests for "update" section parsing.
266 * Update "man" pages.
267 * Update attributes for Alcatel 7750
268 * Add dictionary for Boingo Wi-Fi
269 * Add support for DHCP lease queries.
270 See raddb/sites-available/dhcp
271 * On HUP, check all modules for config files which have
272 changed. And only re-load those modules.
273 * Allow FreeRADIUS-Response-Delay(-USec) to be set for
274 RADIUS packets. Patch from Herwin Weststrate.
275 * Documentation fixes from Alan Buxey and Matthew Newton.
276 * Update "logrotate" script.
277 * Added more RFCs to doc/rfc for new standards implemented
279 * Don't crash when doing "radmin -e "help hup".
280 Patch from Matthew Newton.
281 * The dictionary parser now does more sanity checks, which
282 prevents run-time problems with invalid attributes.
283 * Update debian packages. Patches from Christopher Hoskin.
284 * Many other debian packaging fixes from Matthew Netwon
285 and Herwin Weststrate.
286 * Add "session-state" to Perl. Patch from Herwin Weststrate.
289 * Fix rlm_files so that there are no collisions when loading
290 10's of 1000's of users.
291 * Fix radclient to use our internal v4/v6 parsing functions.
292 v6 addresses with ports now work correctly.
293 * Fix sending/receiving packet messages to wrap v6 addresses
294 in square brackets '[]'.
295 * Check for sasl/sasl.h when building rlm_ldap, and disable
296 SASL functionality if unavailable.
297 * Fix issue which caused a non \0 terminated buffer to be
298 assigned to attributes if the value being assigned contained
299 an invalid escape sequence.
300 * Fix deadlock when reconnecting connections in the connection
302 * Fix potential overrun in functions that used fr_utf8_char
303 with a non nul terminated buffer.
304 * Fix decoding issue for Tunnel-Password type attributes
305 which were very long. Found by Denis Andzakovic.
306 * Fix radclient issue with TCP sockets on FreeBSD.
307 * The server now creates ${run_dir} and ${logdir} directories
308 in daemon mode, when running as "root".
309 * Handle tags when using maps. Fixes #1191.
310 * Fix crash when CoA packets time out.
311 * Fix parse error in rediswho
312 * Fix regex support in SQL radcheck the "users" file and radsniff.
313 * Register listen xlat earlier, so that it's available when the
314 virtual servers are being parsed.
315 * Parse Ascend-Data-Filter when given as "0x..."
316 * Print Ascend-Data-Filter correctly. Add test cases for both.
317 * Allow old-style clients again. They will be disallowed for
319 * Complain instead of crash when "else" and "elsif" are in
321 * Clean up memory more aggressively. This lowers the
322 maximum memory used, most typically for TLS based EAP methods.
323 * Prevent the server from unlinking the control socket of an
324 already running instance.
325 * Fallback to using the configured OCSP URL if one exists, and
326 no URL is provided in the certificate.
327 * Return CoA-NAK if proxying CoA fails. Based on patch from
329 * Lower peak memory usage by decreasing size of internal
331 * The control socket is now left in place if a second copy
332 of the server is accidentally started.
333 * Allow virtual attributes in "switch", "case", etc.
334 Fixes #1240 and #1265.
335 * Many spell check / typo fixes in comments and example
337 * Better handle multiple DHCP listeners.
338 * Don't print secrets for old-style realms. Fixes #1267.
339 * Don't fall through in empty "case" statements.
341 * Update EAP-TTLS so that MPPE keys are correctly calculated with TLSv1.2.
342 * Always delete MS-MPPE-* from the TTLS inner tunnel. This allows
343 TTLS / EAP-MSCHAPv2 to work. Fixes #1206.
344 * Fix off by one error that caused some MSCHAP-Error messages to
345 be sent without the password change version (V=3) and the textual
346 message component (M=).
347 * Always include C= V= and M= in MSCHAPv2 errors. RFC 2759 does not say
348 that any of these fields are optional, and not including V= caused
349 errors with wpa_supplicant.
350 * Do not include M= in MSCHAPv1 errors. It's not supported.
352 FreeRADIUS 3.0.9 Wed 08 Jul 2015 12:00:00 EDT urgency=medium
354 * Make "pool" configurations more consistent, and
355 update documentation for them.
356 * Move connection pool logic to "most recently started",
357 instead of MRU. This should help with pool stability.
358 * More VSAs for 3GPP2
359 * Added examples of multi-value attributes to rlm_perl.
360 * LDAP-Group and SQL-Group attributes are now dynamically
362 * Only the "sql" module registers SQL-Group. Other instances
363 register "instance-name-SQL-Group", similarly to "ldap".
364 * Unknown attributes are now complained about more often
365 when used in unlang statements. e.g. if (Foo-Bar == 3)
366 used to be a string to string comparison. It is now a
368 * Rename RLM_COMPONENT_* to MOD_* in the code.
369 This makes many things easier.
370 * Move to C99 initializers for modules.
371 * Load modules in raddb/mods-enabled. This allows attributes
372 like "LDAP-Group" to be used in the "files" module,
373 without explicit ordering or listing in "instantiate".
374 * Added 'bootstrap' section to modules. Third-party modules
375 will need to be updated.
376 * When adding clients from a DB, add them to a virtual server
377 if that virtual server has a "listen" section. Otherwise,
378 add the clients to the global list.
379 * When reading dynamic clients from a file, don't expire them
380 if the underlying file is unchanged.
381 * Allow the server to originate CoA requests from the post-auth
383 * The server creates ${run_dir} and ${logdir} in daemon mode,
384 if they do not already exist.
385 * Add dictionary for Wi-Fi Alliance Hotspot 2.0. The server
386 now supports all mandatory and optional attributes for this
388 * HUP now re-loads the configuration only if the files have
389 changed. If all files are unchanged, HUP re-opens the
390 log file, and does nothing else.
391 * Much better debug messages for EAP-TLS, including which
392 attributes are cached, and when they are retrieved.
393 * Increase default max_requests to 16384. Memory is cheap now.
394 * Added "stats memory" commands to radmin. Debug build only.
395 * Aptilo controller dictionary updates.
396 * SQL modules now use Acct-Unique-Session-Id everywhere.
397 * The redis modules are now stable.
398 * The LDAP module now supports SASL "interactive bind" method.
399 This allows Kerberos based administrator and user binds.
400 * DHCP code is now in libfreeradius-dhcp.
401 * More DHCP encoding / decoding unit tests.
402 * rlm_replicate can now be listed in the "accounting" section.
403 * Better sqlite debugging output.
404 * Remove "required" option from many sql_ippool directives.
405 * Set default CA "basic constraints" to "critical". Fixes #1073
406 * Updates to help / man pages from Jorge Pereira.
410 * Be more careful about unused config item warnings
412 * Move more defines to be auto-generated.
413 * Allow virtual servers in proxy fallback.
414 * Allow %{module:} to work.
415 * Don't crash in RadSec. Closes #980.
416 * Return better errors when a unix group / user
418 * Re-enable detail module "locking" parameter.
419 * Don't crash when logging replies from Status-Server packets.
420 * The couchbase module now uses "update" instead of "map",
421 for consistent with the rest of the server. See
422 raddb/mods-available/couchbase
423 * Don't require NT-Password for MS-CHAP password changes.
424 * Be a bit more careful about decrypting MS-CHAP-MPPE-Key
425 attributes. Closes #1013. There is no perfect fix, tho.
426 * Fix security issues with EAP-PWD.
427 See http://freeradius.org/security.html#eap-pwd-2015
428 * Fix dynamic clients read from SQL in non-debug mode
429 * MS-CHAP now allows retries (i.e. password change) when
430 passwords are expired.
431 * Allow "user=radiusd" when the server is already user
433 * suid up/down works on non-Linux systems. This means
434 that the control socket should have the correct
436 * Fix issue which caused the server to sometimes have problems
437 when a home server was marked zombie.
438 * Fix format.pl because Perl is now more picky.
439 * Fix proxy to Packet-Dst-IP-Address, so that it uses the
440 correct destination port.
441 * Fix corner case with cursor functions and removal.
442 * OpenDirectory fixes and documentation.
443 * Fix leaks in rlm_redis.
444 * RFC 6929 "evs" attributes are now encoded / decoded
446 * Fix talloc pool leaks when receiving malformed or
447 retransmitted Accounting/CoA requests.
448 * Printed attributes again use double quotes instead of
450 * Set X509_V_FLAG_CRL_CHECK_ALL, and add "check_all_crl"
451 to eap.conf. Fixes oCert CVE-2015-4680.
452 * rlm_expr now errors out correctly on malformed attribute
453 references instead of triggering an assert.
454 * Make "break" work in "foreach" loops
455 * Allow dynamic expansions to work again in the "hints" file.
456 * Correct minor typos in comments and examples from Alan Buxy.
457 * Re-urlencode the path portion of ldapi:// urls before
458 passing it to ldap_initialise.
460 FreeRADIUS 3.0.8 Wed 22 Apr 2015 13:30:00 EDT urgency=medium
462 * Allow syslog_severity to be set in rlm_linelog.
463 * Allow defaults to be set for bulk clients in LDAP and couchbase.
464 * Updates to dhcpclient. Patches from Nicolas C.
465 * rlm_mschap now supports direct connections to winbind, which
466 is faster than ntlm_auth. See raddb/mods-available/mschap.
467 Patch from Matthew Newton.
468 * Recommend /dev/urandom for TLS randomness, instead of
470 * Allow TLSv1 to be disabled via "disable_tlsv1" in tls{}.
471 * Allow Expanded EAP types where vendor is 0 (IETF) and
472 type is normal EAP type. Supplicants sending Expanded
473 EAP types like this are broken.
474 * Add support for server side sort controls when searching for
475 user objects in rlm_ldap.
478 * Don't complain about "authorize" in "server {}" blocks, but
479 only if there's no "server" block.
480 * Fix cosmetic issue where debug from the first packet read by
481 a detail reader thread would be emited during config parsing.
482 * Fix ASSERT on truncated detail packets.
483 * Don't use main server log functions from within panic_action,
484 as in the case of syslog this would cause deadlocks if the
485 fault was triggered from within a malloc.
486 * Fix issue in "switch" when "correct_escapes = false".
488 * Fix sqlcounter configuration to use "%%b" instead of "%b",
489 otherwise the new syntax validation will fail.
490 * Allow forward references in configuration items. Modules
491 aren't always loaded in a sane order.
492 * Fix more escaping issues. Closes #912.
493 * Decode MAC addresses correctly for VMPS.
494 * Fix memory leak with TLS connections.
495 * Fix state machine threading issues for conflicting packets.
496 * Fix copy_request_to_tunnel issues for tagged attributes.
497 * Allow "ok" to over-ride "updated" inside of Auth-Type sections.
498 * Update state machine so that post-proxy is run though child
499 threads for performance, instead of blocking the main thread.
500 * Allow "netmask" to work again in client definitions.
501 * Relax restrictions on SQL group queries.
502 * track outgoing proxy sockets and clean them up more aggressively.
503 * track proxy statistics, including CoA and Disconnect.
504 * If radmin has a connection failure when running a command,
505 it re-connects and runs the command again.
506 * mark home servers "unknown" less aggressively.
507 * Fix potential SEGV in PostgreSQL driver on error.
508 * Fix issue where fields like nas_type would not be accessible via
509 the %{client:} xlat, for dynamic clients.
510 * Set default busy_timeout (of 200ms) in the sqlite driver, so writes
511 don't cause selects to fail in multithreaded mode. This is user
512 configurable, and may be increased if required.
513 * Convert Password-With-Header attributes to binary (from hex or
514 base64), in the authorize method of rlm_pap.
515 * Fix invalid assert in state.c, that could cause abort in
517 * Fix double free when -m flag is used, and connection pools are
518 referenced by multiple modules.
519 * RADIUS over TLS accounting uses the same port as authentication.
520 * Regularized return codes from radmin commands.
521 * Fix RHEL spec file so it works correctly for Centos7 which uses
522 systemd, and didn't like the SystemV init script.
523 * radwho and radlast now have a -D option to load dictionaries
524 * DHCP packets are no longer checked for duplicates.
525 * Don't crash in sql module group comparisons in corner case.
526 * Calculate MPPE keys correctly when using TLS 1.2.
527 * Fix load-balance sections. Closes #945
528 * TLS certificates are available again in the post-auth section.
529 They are not available for session resumption.
530 * radclient encodes CHAP-Password properly when using -c.
532 * Fix issue in rlm_cache_memcached driver that caused variable
533 length values to be truncated.
534 * Fix track functionality in detail reader, so it no longer
535 fails with a "Failed marking detail request as done: Bad file
537 * Actually add the peer identity (as User-Name) to the inner
538 tunnel in EAP-PWD requests, so it's available for lookups.
539 * Fixes to PostgreSQL queries. Patches from Santiago Gimeno.
541 FreeRADIUS 3.0.7 Thu 19 Feb 2015 12:00:00 EDT urgency=medium
543 * Allow coa home_servers to be derived from client
544 sections if a coa_server section is provided.
545 * Automatically determine the correct port if no port is
546 provided for a home server.
547 * Allow foreach to operate over lists.
548 * Add compile time features to ${feature.*} and versions
549 of core libraries to ${version.*}. Feature and version
550 names match output of radiud -xv. %v is now deprecated.
551 * Add support for PATCH method in rlm_rest.
552 * Validate more module xlats on startup, and warn if an
553 xlat expansion is found in a double quoted config item
554 which will not be expanded.
555 * Add support for sub-second timeouts in rlm_rest.
556 * Add support for connection timeouts in rlm_rest.
557 * Add %{jsonquote:<str>} xlat to escape strings for insertion
559 * Add %{ldapquote:<str>} xlat to escape strings for insertion
561 * Add %{explode:&ref <char>}, splits value of &ref on
562 <char> and creates new &ref type attributes with the
564 * Allow rlm_ldap to use attribute references for base_dn and
565 filter config items. The attribute references are not
566 escaped, allowing DNs and filters to be created dynamically.
567 * Add %{nexttime:[<int>]h|d|w|y} to calculate the number of
568 seconds before the next <int> hour(s), day(s), week(s),
570 * Allow the left side of update sections to be xlat expansions.
571 The result of the expansion is then used to reference the
572 attribute to be modified.
573 * Added %{lpad:&Attribute-Name 7 x} and rpad. These produce
574 fixed-width output strings, with padding to the left (lpad)
576 * For some SQL drivers (MySQL, sqlite) distinguish between
577 constraints violations (on insert), invalid queries, and
578 server errors, and return noop, invalid, and error respectively.
579 * Call SHOW WARNINGS in the MySQL driver and write them to
580 the request log, if libmysqlclient indicates warnings are
581 available on the server.
582 * Forbid the creation of Vendor-Specific for non-standard
583 VSAs. Use Attr-26 = 0x... instead.
584 * Make dhcpclient work with raw sockets and various other
585 improvements - Contributed by nchaigne
586 * Add support for SSHA2 - Contributed by PDD.
587 * Add perle dictionary - Contributed by Hachmer
588 * Modernise init scripts for RHEL, SUSE and Debian.
589 * radmin now tracks the return code of commands, and exits
590 with status "1" if any command failed to execute.
591 * radmin now sends error messages from the server to
592 stderr, instead of to stdout.
593 * radmin now looks for sockets matching it's UID and GID,
594 rather than just always using the first one it finds.
595 * radmin can how delete clients which are tied to a listener.
596 * Moved RADIUS attribute definitions to src/include/rfc*.h
597 * Move to talloc pools for requests. For in-memory tests
598 (default config, 'users' file), performance increases by 30%.
599 * In rlm_ldap allow sasl_mech to be specified for admin and
600 user binds. Only non-interactive mechs (like EXTERNAL)
601 are currently supported.
602 * Remove support for ephemeral RSA keys. They were "export only",
603 and should not be used by anyone.
604 * Syntax errors in the "users" file now produce better
608 * Fix issues parsing LDAP hostnames with non-standard ports.
609 * Fix issues with realms containing regular expressions.
610 * Allow unary negation before parantheses in rlm_expr.
611 * Fix infinite loop in kevent event loop code. Issue only
612 presented on FreeBSD.
613 * Be more careful to define Auth-Types before loading modules.
614 * Link libfreeradius-radius against OpenSSL too, to avoid
615 multi-version symbols in SSL libraries.
616 * When rlm_ldap rebinds a connection, it should use bind
617 credentials from the module that created the connection
618 pool, not credentials from the module referencing it.
619 * Empty server config pairs should be allowed in rlm_ldap
620 instances that reference another module's connection pool.
621 * Mark rlm_always as huppable, so its rcode can be changed
622 via radmin (allows policy toggles).
623 * Emit warnings when ignoring user configured pool values.
624 * Fix issue that would cause radclient to complain
625 intermittently about differing numbers of filters and
627 * Fix cosmetic issues in connection pool logging, that made
628 it appear as if the same connection was being opened
630 * Fix threadsafety issues in SQL drivers, where a static
631 buffer was used to store error messages.
632 * Log RERROR, RWARN, RINFO to the global log if request
633 logging is not enabled.
634 * Link to libldap instead of libldap_r. libldap_r
635 is not supported for use by projects outside of OpenLDAP.
636 * Set connection timeout correctly in rlm_sql_mysql.
637 * Build with older versions of libcurl, and use CFLAGS from
639 * Honour Packet-Src-Port and Packet-Src-IP-address in radclient.
640 * Initialise ldapai_info_version field, so libldap will report
641 its vendor and version.
642 * Fix log rotation scripts by using the copyrotate option.
643 * Fix issue that caused opening control sockets to always
644 fail on non-Linux systems, if a user or group was set.
645 * Save Session-State after proxying.
646 * Additional fixes for reading CoA/DM requests from detail
648 * Create dynamic clients if the dynamic clients virtual server
649 returns ok *or* updated. Emit useful messages for other codes.
650 * Compile bare "authorize" statements, and issue errors saying
651 using them isn't a good idea.
653 FreeRADIUS 3.0.6 Wed 17 Dec 2014 16:00:00 EDT urgency=medium
655 * radmin / raddebug conditional errors are printed
656 to the output, instead of being discarded.
657 * raddebug will exit if condition set with -c was invalid.
658 * radmin auto-reconnects if the connection to the server
660 * rlm_cache now has submodule support. See
661 raddb/mods-available/cache
662 * New memcached driver for rlm_cache. See
663 raddb/mods-available/cache
664 * Add support for &Attribute-Name[*] in conditions.
665 See "man unlang" for details.
666 * Add &Attribute-Name[n] which gets the last instance
667 of an attribute e.g. Module-Failure-Message[n].
668 * Allow for redundant string expansions. See the
669 "instantiate" section of radiusd.conf.
670 * When checking IP addresses in conditions, make the
671 right side be parsed as an IP prefix.
672 * Support JIT compilation of compiled regular expressions
673 when built with libpcre.
674 * Support named capture groups with "%{regex:<name>}"
675 when built with libpcre.
676 * Increase regular expression capture groups from 8 to 32.
677 * Emit error markers for badly formed regular expressions.
678 * Allow 'm' flag to enable multiline mode in regular
680 * Support limited implicit attribute conversion in update
682 * Support casting between IPv6 and IPv4 where the IPv6
683 address has the v4/v6 mapping prefix (::ffff:).
686 * PEAP works again. As does proxying EAP-MSCHAPv2
687 from inside of a PEAP tunnel.
688 * "group" is allowed inside of "instantiate" sections.
689 * update disconnect {} with
690 disconnect:Packet-Dst-IP-Address now works correctly.
691 * Regular expression comparisons of non string attributes
692 are now disallowed in the files module. Previously
693 they would silently fail or produce undefined behaviour.
694 * Fix parsing of old regular expressions. Closes #842
695 * Fix off by one error in ascend filters. Closes #843.
696 * Handle NT-Hash in rlm_pap. This allows passwords to
697 have backslashes in them.
698 * Fix infinite loop on "Fall-Through = yes" when
699 processing SQL groups.
700 * Correct the check of SQL query return code.
701 * Run "Post-Auth-Type Reject" if the request was rejected
703 * Write "Login OK" only if the post-auth section passed.
704 * Create TLS-Cert-* certificates, even when EAP session
706 * Finalize the "correct_escapes" with many more tests.
707 * Move to the new OpenLDAP libldap API, fixes more issues
709 * Fix potential memory corruption in rlm_ldap if start
710 connections were set to 0, and the server was running
711 in threaded mode. The fix is a workaround for an issue
712 in libldap and was suggested by Howard Chu.
713 * Give parse errors on "%{...", without the closing brace.
714 * Allow spaces in certificate passwords for build rules
716 * Make all regular expression evaluation binary safe.
717 Where that's not possible, emit an error if the pattern
718 or subject contains an embedded null byte.
719 * Fix various issues around masking IPv6 addresses.
720 * Give descriptive error if unknown attributes are used
721 in "update" sections.
722 * Deal with cases where ldap_initialize isn't available
723 gracefully, and use it exclusively when it's available.
725 FreeRADIUS 3.0.5 Fri 21 Nov 2014 15:30:00 EDT urgency=medium
727 * Large update to Huawei dictionary.
728 * Added dictionary.rfc7155
729 * Regular expressions like /%{User-Name}/ are now parsed
730 and validated when the server starts.
731 * All configuration items which are dynamically expanded
732 are now parsed and validated when the server starts.
733 * %{expr:...} expressions can now do bit shifting and more.
734 See raddb/mods-available/expr.
735 * The detail file reader can now track packets which have
736 had replies, so they are never re-transmitted. See
737 raddb/sites-available/buffered-sql, the "track" config item.
738 * CoA and Disconnect packets can now be sent to a specific
739 home server by setting control:Packet-Dst-IP-Address and
740 (optionally) control:Packet-Dst-Port.
741 * Allow CoA and Disconnect packets to be read from the
743 * Allow LDAP to specify arbitrary attributes for dynamic
745 * Convert all unused attributes in the control: list to config
746 pairs in dynamic clients. This allows arbitrary client
747 attributes to be set for dynamic clients too.
748 * rlm_couchbase now supports bulk loading of clients on startup
749 in a similar way to rlm_ldap. Contributed by Aaron Hurt.
750 * Allow one level of backslashes (finally). See radiusd.conf,
751 "correct_escapes" setting.
752 * Rename dictionary.redback to dictionary.ericsson.ab
753 * Add --disable-openssl-version-check option to configure.
754 So vendors can disable the check. Patch from
756 * Do context-specific indenting in debug messages. This makes
757 the debug output easier to read.
758 * Make configuration a separate RPM, just like for Debian.
759 * better decoding of unknown VSAs
760 * When supported by OpenSSL, allow TLS 1.1 and TLS 1.2
762 * Allow multiple new connections to be spawned simultaneously
763 in the connection pool, to cope with spikes in traffic.
764 * Document retry_delay in connection pools.
765 * Allow checksimul in rlm_couchbase.
766 * Use kqueue on systems which support it. This allows for
767 better scaling when using many sockets.
770 * Parse list qualifiers in generic LDAP 'valuepair_attribute'
771 attributes correctly.
772 * Fix issue where prefix length would be ignored for dynamic
773 or static clients if the address matched INADDR_ANY
775 * Allow null user object filter in rlm_ldap, it's valid to
776 specify a complete object DN and use the base scope.
777 * Don't SEGV if a received attribute value in a JSON structure
778 is null, or a value can't be stringified.
779 * Don't assert if the server returns a JSON content-type and
780 the server hasn't been built with support for JSON.
782 * Set CURLOPT_NOSIGNAL to prevent curl from handling signals
783 and causing a longjmp error when the server was running with
785 * Allow tabs after attribute names in the "users" file.
787 * Free unknown DICT_ATTRs. Closes #795
788 * Handle unknown attributes in the conditions and "update"
789 sections. e.g. Attr-1.2.3.4 = foo.
790 * Use correct array size for MS-CHAP new password.
791 * In rlm_rest, check for older versions of libraries at start
792 time, rather than when a packet comes in.
793 * Don't call detach on parse error in rlm_perl. Closes #802.
794 * Integer fixes for big-endian systems. Closes #803.
795 * Don't optimize %{Packet-Src-IP-Address}. Closes #804.
796 * dhcpclient loads dictionaries correclty. Closes #805.
797 * double quotes are no longer escaped in single-quoted
798 strings. e.g. 'foo "hello" bar'.
799 * Fixes for proxying to virtual servers broke the detail file
800 reader. Now they both work.
801 * Typos and fixes from Nikolai Kondrashov.
802 * Fixes to OpenSSL version checks, for cross-platform issues.
803 * cppcheck fixes from Herwin Weststrate.
804 * Fix build for OSX Yosemite
805 * Merge DHCP sub-options. Closes #812.
806 * Fix decoding of Starent attributes.
807 * When a module asks for a connection, don't return idle
809 * LDAP connection timeouts will now retry, instead of failing.
810 * Prevent race conditions between fork and wait for child.
811 Patch from James Rouzier.
812 * Fix triggers for connection pools. Patches from
814 * Fix SEGV when comparing non string type check items.
815 * Build with newer versions of libmysqlclient.
816 * make the %{escape:} and %{unescape:} xlat functions UTF8
818 * Don't escape UTF8 chars in SQL query strings.
819 * Fix issue in cached LDAP group comparisons, which caused
820 checks to sometimes fail.
821 * Fix use after free issue in unlang switch evaluation.
822 * Respect operators in rlm_cache when merging into the current
824 * Update Cache-Entry-Hits each time rlm_cache is called.
825 * Produce WARN messages if SQL queries are empty strings.
826 * Fix invalid assertion when proxying CoA requests.
827 * Allow empty strings in "case" statements. Closes #836.
828 * Normalize escaping for string expansions. i.e. don't do
829 double escaping in rare situations.
830 * Normalize LDAP escaping. LDAP servers have multiple ways
831 to escape things, so the data has to be normalized before
832 we can compare two LDAP DNs.
833 * Don't go to high debug level if we're proxying inner EAP
835 * Fix rlm_rest state handling. Closes #835.
837 FreeRADIUS 3.0.4 Wed 10 Sep 2014 12:00:00 EDT urgency=medium
839 * Home server "response_window" can now take fractions of a
840 second. See proxy.conf.
841 * radmin now supports "show module status", as thee counterpart
842 to "set module status"
843 * Added dictionary ericsson.packet.ccore.networks, bluecoat,
844 citrix, compatible, riverbed, ruckus, and RFC 7268.
845 * Add %{tag:} expansion to get the tag value of an attribute.
846 * Report 'application_name' in connections to PostgreSQL servers.
847 FreeRADIUS connections will now appear as
848 'FreeRADIUS <version> - <name>' in pg_stat_activity.
849 * All config item fields are now type checked at compile time
850 to prevent issues similar to #634 occuring again.
851 * Modify pairparsevalue to deal with embedded NULLs better,
852 and use the binary versions of attribute values in rlm_ldap.
853 * "ipaddr" will now use v6 if no v4 address is present. You should
854 use "ipv4addr" or "ipv6addr" to force v4/v6 addresses.
855 * The above applies to "listen", "home_server", and "client" sections.
856 * "client" sections will allow "ipaddr = 192.192.0/24". The old
857 "netmask" is still accepted, but the new format is preferred.
858 * Allow custom HTTP headers to be set for rlm_rest requests using
859 control:REST-HTTP-Header (attributes consumed after use).
860 * Extend format of %{rest:} expansion to allow HTTP method and POST
862 e.g. %{rest:POST http://example.org/api foo=bar&baz=boink}.
863 * Add %{hmacsha1:&data &key} and %{hmacmd5:&data &key} expansions
864 for signing data in requests.
865 * rlm_cache now consumes its control attributes to make runtime
866 configuration easier.
867 * Add control:Cache-Read-Only which when set to 'yes' will make the
868 cache module merge existing cache data, but not create new entries.
869 * Add %{unescape:} and %{urlunquote:} expansions to reverse escaping
871 * Add support for aliases in rlm_ldap.
872 * Add support for connection pool sharing to all modules that use
873 the connection pool (pool = <instance>).
874 * "tls" sections now have a "psk_query" configuration item, for dynamic
875 queries to discover a key from a PSK identity.
876 * Preliminary support for EAP channel bindings.
877 * Foundational work for dynamic home servers. They do not yet work,
878 but this is now only a matter of updating the "realm" module in
880 * Support &attr[*] syntax to copy all instances of an attribute when
881 used with the += operator in an update section. May be qualified with
883 * The logintime and expiration modules can now be listed in the
884 post-auth section. This makes some configurations simpler.
885 * Allow comparison of integer attributes of different sizes,
886 without requiring a cast.
887 * rlm_sqlippool is now IPV6 capable. Set "ipv6 = yes" to get
888 Framed-IPv6-Prefix returned. The SQL queries have NOT been updated.
889 Please submit patches.
890 * The debian build now checks for the OpenSSL package with the heartbleed
891 fix, and if found, sets: allow_vulnerable_openssl = 'CVE-2014-0160'
892 * allow bootstrap from multiple files in sqlite driver.
895 * make case-insensitive regular expressions work again, and add tests
897 * A few more talloc parenting issues
898 * Fix delayed proxy reply handling. Closes #637
899 * Fix OpenSSL initialization order when using
900 RADIUS/TLS. Fixes #646
901 * Don't double-quote strings in debugging messages
902 * Fix foreach / break. Fixes #639
903 * Chargeable-User-Identifier, ADSL-Agent-Circuit-Id and
904 ADSL-Agent-Remote-Id should be "octets" types in the default
906 * Fix typo in mainconfig. Fixes #634
907 * More rlm_perl fixes. Fixes #635
908 * Free OpenSSL memory on clean exit.
909 * Fix <attr>[0] !* ANY - Was removing all instances of <attr>
910 * Fix case where multiple attributes were returned from RHS of
911 mapping, as with rlm_ldap. Fixes #652
912 * Fix corner case in cursor where using fr_cursor_next_by_da
913 after calling fr_cursor_remove may of resulted in a read of
914 uninitialised memory.
915 * Don't SEGV if all connections to a database server go away.
917 * Fix issue where <attr> -= <value> was not removing tagged
918 instances of <attr> equal to <value> (only untagged).
919 * Fix issue where tag values were not being set on attributes
920 created with unlang/ldap update blocks.
921 * Create rlm_sqlcounter attributes as integer64 types instead
922 of integer types, so large counter values can be specified.
923 * Fix issue where specifying a dynamic client IP addresss using
924 FreeRADIUS-Client-IPv6-Prefix or FreeRADIUS-Client-IP-Prefix
925 may have caused a validation error.
926 * Don't print two "&" for messages about attribute or list
927 references in debug output.
928 * Fix urlquote and escape to encode Unicode characters correctly.
929 * Fix redundant-load-balance blocks to try other modules in
930 the group if one fails.
931 * Fix issue with rlm_pap password normalisation where
932 'known good' password strings stored in octets type attributes,
933 would be sometimes misnormalised as base64.
934 * Don't stop processing DHCP options if we find a 0x00 padding
936 * Fix issue where modifying the value of an attribute created
937 from a template with a literal value, may have resulted in the
938 template literal being freed.
939 * Fix parenting issues in tls code which may have resulted in
940 memory corruption and crashes.
941 * Fix issue in radsniff where writing to PCAP files and using
942 -R response filters, where the requests would still be written
943 to the PCAP for non matching responses.
944 * Define __APPLE_USE_RFC_2292 so that the server builds with IPv6
946 * Fix LDAP group lookups for named rlm_ldap instances.
947 Note that attribute references should be used when
948 checking LDAP-Group attributes. e.g. if (&LDAP-Group == 'foo').
949 * Delayed attribute references can now be used in unlang
950 existence checks. i.e. if (&Attribute-Name) { ... }
951 * Fix issues in EAP-PWD. CVE-2014-4731, CVE-2014-4732, and
952 CVE-2014-4733. There is no external authentication bypass.
953 * Fix a number of uses of the talloc parent/child reference.
954 * Release connection used for reading bulk clients in rlm_ldap.
955 * rlm_rest is now fail-safe if it's used without any configuration
956 * Pull in build fixes for FreeBSD from ports.
957 * Fix error in sqlite postauth query
958 * Evaluate argument to "switch" statements once, instead of for each
960 * Define sig_t on systems without it. Closes #765.
961 * Fix boundary issue with rlm_rest. Closes #768
962 * Optimize "%{Attribute-Name}" in comparisons only if the dictionary
964 * Don't do chmod() in rad_mkdir() if the directory already exists.
965 We might not have permission to change it.
966 * Use getpwnam_r() and getgrnam_r() on systems which support it.
968 * Clients loaded from SQL are now tied to the "listen" section
969 of a virtual server, instead of being global.
970 * Check for -lpcre. The system might have pcre.h without -lpcre.
971 * When proxying to a virtual server, use the proxy_reply instead
973 * Fixed typos in DHCP SQL IPPool.
974 * Fix crash when passing multiple arguments to Perl xlat.
976 FreeRADIUS 3.0.3 Mon 12 May 2014 15:30:00 EDT urgency=medium
978 * Everything now builds with no warnings from the C compiler,
979 clang static analyzer, or cppcheck.
980 * rlm_ldap now supports defining the LDAP attribute name via
981 backticked expansion (i.e. shell command) in
982 RADIUS <-> LDAP mappings.
983 * rlm_ldap now supports older style generic attributes.
984 * dynamic expansions (e.g. "%{expr:1 + 2}" are now parsed
985 when the server starts. Syntax errors in the strings
986 are caught, and a descriptive error is printed.
987 * Static regular expressions (e.g. /a*b/) are now parsed
988 when the server starts. Syntax errors in the strings
989 are caught, and a descriptive error is printed.
990 * dynamic expansions are cached after being parsed. They are
991 no longer re-parsed at run-time for every request.
992 * regular expressions are now parsed and cached when the server
994 * Added the %{rest:} expansion to rlm_rest, which will send
995 a GET request to the URL passed as the format string.
996 Any body text will be written to the expansion buffer.
997 * rlm_rest now available as a debian package.
998 * When an 'if' condition statically evaluates to true/false,
999 unlang does more static optimization. For examples, see
1000 src/tests/keywords/if-skip
1001 * All modules are marked as safe for '-C', which lets the
1002 dynamic expansion checks work in more situations.
1003 * Added 'none' and 'custom' rlm_rest body types. 'custom'
1004 allows sending of arbitrary expanded text and content-type
1006 * Added "config" section to Perl. See mods-available/perl
1007 * Added '%v' which expands to the server version - Patch
1009 * more mis-matched casts are caught in "if" conditions,
1010 and descriptive errors are printed.
1011 * Support basic response validation in radclient. This allows
1012 administrators to write local test cases for their
1013 site-specific configurations.
1014 * Removed radconf2xml and radmin "show client config" and
1015 "show home_server config".
1016 * Forbid running with vulnerable versions of OpenSSL.
1017 See "allow_vulnerable_openssl" in the "security"
1018 subsection of "radiusd.conf"
1019 * Catch underlying "heartbleed" problem, so that nothing bad
1020 happens even when using a vulnerable version of OpenSSL.
1021 * Add locking API for sql_null, linelog, and detail modules,
1022 which should improve performance and work around issues
1023 on platforms with bad file locking.
1024 * Allow DHCP NAKs to be delayed, via setting
1025 reply:FreeRADIUS-Response-Delay = 1
1026 * Allow tag and array references anywhere attributes
1027 are allowed in "unlang".
1028 * many enhancements to radsniff, including output
1029 to collectd, ipv6 support and packet loss statistics.
1030 * Many dictionary updates (ZTE, Brocade, Motorola).
1031 * rlm_yubikey now automatically splits passwords from OTP
1033 * The detail file reader is now threaded by default.
1034 This should improve performance reading the files.
1037 * Fix xlat expression %{attribute[n]} so that it actually
1038 returns the n'th attribute instead of the first one.
1039 * Don't parse string on RHS of update {} when using unary
1040 operators (!*). The RHS should always be ignored.
1041 * Check for more optional functions in json-c so we can
1042 Build with libjson0, which is the name of the json-c package
1044 * Fix issue in radmin where the main dictionaries would
1045 not be loaded which, depending on the configuration, may
1046 have caused validation errors.
1047 * Fix handling of "%{reply:3GPP-*}"
1048 * Fix rlm_perl garbage attributes
1049 * Fix oracle SQL queries, which amongst other things still
1050 used the old expansion format, which is no longer
1052 * Truncate long format strings and error markers instead of
1054 * Fix multiple attribute parsing in rlm_rest JSON.
1055 * Don't crash in rlm_rest if connect_uri is commented out
1056 in the configuration.
1057 * Don't double-escape strings to / from Perl. You may need
1058 to double-check your Perl scripts if they use "\" characters.
1059 See mods-available/perl for documentation.
1060 * Don't re-run "authorize" if a home server fails to respond.
1061 * Don't append "0x" to hex output of octets types, for xlat
1062 expansions. This is the same as v2, and makes it easier
1063 to concatenate multiple attributes of type "octets"
1064 * FreeBSD fixes for execinfo linking.
1065 * Make some of the module configurations more consistent.
1066 * Fix corner cases where STDOUT wouldn't be closed in
1068 * Re-enable "update coa" and originating CoA requests.
1069 * Prevent multiple threads writing to the sql query logs.
1070 * Fix zombie period calculation. Closes #579
1071 * Properly parent VPs for talloc, when moving them in map2request.
1072 * Various fixes for talloc parent / child relationships
1073 * Allow rlm_counter to support VSAs.
1074 * Normalize return codes for many modules. "do nothing" is noop,
1076 * Run Post-Proxy-Type Fail. Closes #576
1077 * Fix DHCP destination port for replies to relays. Closes #591
1078 * Do-Not-Respond policy works again Closes #593
1079 * Proxy-To-Virtual-Server works again. Closes #596
1080 * Build fixes for ancient systems. Closes #607, #608, #609.
1081 * %{Module-Return-Code} works again. Closes #610.
1082 * Don't increment statistics for Status-Server responses.
1084 * A duplicate request isn't a duplicate if the original one
1085 is marked "done". This should lower retransmissions from
1087 * Fix multiple regular expression and glob memory leaks.
1088 * Don't allocate any memory in fr_fault() as it can cause malloc
1090 * Temporarily set dumpable flag before calling system in fr_fault()
1091 else the debugger may not be able to attach.
1092 * Set nonblock on all TCP client sockets.
1093 * Fix minor buffer overrun in mschapv2 where some attribute strings
1094 were not correctly \0 terminated.
1095 * Fix crash on authentication failure with MIT kerberos.
1096 * Fix code so that octal escape sequences aren't prematurely unescaped
1097 in rlm_sql, radclient, preprocess, and other places. This may
1098 require configuration changes, as these sequences will no longer
1099 need double escaping (\\) of the backslash.
1100 * The connection pools no longer have one connection used twice
1101 in certain rare conditions.
1102 * Use self pipes for internal signals. The code was there, but was
1104 * Don't crash if there are outstanding EAP sessions and were told to
1106 * Fix typo in dictionary.rfc4072
1108 FreeRADIUS 3.0.2 Fri 21 Mar 2014 08:30:00 EDT urgency=medium
1109 Feature improvements
1110 * secret keys and LDAP / SQL passwords are now printed as
1111 '<<< secret >>>' in debugging mode. Use -Xx to see the
1113 * Print out more information about passwords in -Xx,
1114 including hashes, comparisons, etc.
1115 * Allow cast (and implicit conversion) of integers to IPv4 addresses
1116 * More xlats allow attribute references. This means they can
1117 operate on binary data. e.g. expr, base64, md5, sha1.
1119 * The dictionaries are now auto-loaded. raddb/dictionary
1120 should no longer have $INCLUDE ${prefix}/share/dictionary
1121 * A "panic_action" can be set to have the server dump a gdb
1122 log on SEGV or other fatal error. See radiusd.conf
1123 * Add support for SHA-224, SHA-256, SHA-384, SHA-512 to rlm_pap.
1124 * Add "%{sha256:}" and "%{sha512:}" xlat functions.
1125 * Cache CUI in EAP session resumption.
1126 * templates can now have sub-sections, which will be included
1127 in the section referencing the template.
1128 * Update more dictionaries.
1129 * Added more instances of the "always" module, for all return
1131 * Suppress broken NASes when proxying. Retransmits which occur
1132 more than once per second are rate-limited to once per second.
1133 * Allow '&' in more xlat expansions.
1134 * Update PostgreSQL schema and queries to record last updated
1135 time, and accounting interim.
1136 * Optimize more "if" conditions when the server loads. This will
1137 avoid work at run time. e.g. ("foo" == "bar") --> FALSE.
1138 * Allow removal of all attributes within a list with !* operator.
1139 * Allow list to list copies with request qualifiers (outer.).
1140 * Add support for ipv4 prefixes and ipv6 addresses and prefixes to
1142 * allow radmin command "set module status <module> <code>"
1143 which can be used to forcibly enable/disable modules.
1144 * pap module now assumes Cleartext-Password if Password-With-Header
1145 doesn't have a {...} header.
1146 * Added "unpack" module. It can unpack binary data from horrible
1147 VSA formats. See raddb/mods-available/unpack
1148 * Added example IP Pool for DHCP, using sqlite. From Matthew Newton
1149 See raddb/mods-config/sql/ippool-dhcp/
1153 * Fix operation of fr_strerror() with RE*() macros.
1154 * Don't assert if the connection we're trying to reconnect
1156 * Fix %{mschap:User-Name} xlat.
1157 * Allow comparisons of signed integers and of ethernet addresses.
1158 * Fix parsing of text-based ascend binary filters.
1159 * Fix a few minor Coverity and clang analyzer issues.
1160 * Log WARNING and ERROR prefixes only once, not twice.
1161 * Fix attribute truncation seen in Perl and other places.
1162 * Use correct port when DHCP relaying.
1163 * Fix behaviour on FreeBSD where sending packets from an interface
1164 bound to an IP address would fail when the server was built with
1166 * Don't abort() when freeing home servers on exit.
1167 * Fix edge case in pairmove() when some attributes could be over-
1169 * Do checks for individual sqlite v2 functions so rlm_sqlite builds
1170 correctly with more versions of the library.
1171 * In heimdal kerberos, create MEMORY ccaches on a per context basis.
1172 This prevents issues with the root ccache being used.
1173 * Fix corner case with proxying, where home server goes down.
1174 * Rate-limit "max_requests" complaint. We don't want to fill the
1175 logs when something goes wrong.
1176 * Use /dev/urandom for raddb/certs/random, if it exists.
1177 * Issue WARNING that old-style clients should no longer be used.
1178 * Auto-set secret to "radsec" for tcp+tls home servers.
1179 * Fix double free in home_server_add when there is a parse error
1181 * rlm_unix checks if the dictionaries are broken, instead of crashing
1182 * Fix potential memory corruption when normalising salted password
1183 hashes from hex, where the combined hash and salt was > 64 bytes.
1184 * Register sqlcounter attributes correctly, and other issues with it
1185 * treat 127.0.0.1/32 as being identical to 127.0.0.1
1186 * Don't mangle error output of SQL drivers like PostgreSQL
1187 * Fix usage of "tls = ${tls}". It could previously cause problems
1188 when the reference was used multiple times.
1189 * Fix TLS session leak for incoming sockets.
1190 * Try harder to clean up memory on exit when using "-mM"
1191 * Fix memory leak when home server is down for RadSec connections
1192 * rate-limit outgoing connection attempts when the home server
1193 is down. It will retry no more than once per second.
1194 * When parsing ipv6 address prefixes, always mask off the host
1196 * Fix rlm_counter so that it does not create two reply
1198 * Fix issues with DHCP Sub-TLVs where the value of the first
1199 Sub-TLV would appear corrupted, and subsequent TLVs would
1200 not appear in debug output.
1201 * Initialize scope in IP address parsing
1202 * Prevent vendor attributes and RFC space attributes from clashing
1204 * Set source IP address for DHCP packets from DHCP-Server-IP-Address,
1205 or DHCP-DHCP-Server-Identifier, if we're unable to otherwise
1206 determine the source IP.
1207 * Fix POST attribute parsing in rlm_rest.
1208 * Fix JSON attribute parsing in rlm_rest.
1209 * Don't append trailing & to POST options in rlm_rest (minor).
1210 * Process HTTP 100 Continue messages correctly in rlm_rest
1211 * Fix generation of long > 512 byte POST payloads, where attribute
1212 values on the chunk boundary may have been omitted in rlm_rest.
1213 * Remove duplicate escape sequence parsing in rlm_sqlippool and
1214 rlm_sqlcounter which caused issues with escaping %. Escape
1215 sequence parsing is now handled purely by the xlat functions.
1216 * Ensure %% is treated as a string literal, and so not passed to any
1217 xlat escape functions for processing.
1218 * Correct calculation of Message-Authenticator
1219 for CoA packets. Closes #556
1221 FreeRADIUS 3.0.1 Mon 13 Jan 2014 14:30:00 EDT urgency=medium
1222 Feature improvements
1223 * Add "timeout" to exec, and "ntlm_auth_timeout" to mschap.
1224 So that run-away child processes are caught earlier.
1225 * Allow TLS clients to use "proto = tls", in which case
1226 TLS is required. The shared secret is then set to "radsec".
1227 * More documentation in the tls virtual server.
1228 * Add "date" module for date formatting.
1229 See raddb/mods-available/date.
1230 * Added unit test suite for internal server functionality
1231 * When loading "update" sections, check if the RHS is a literal
1232 value. If so, syntax check it immediately.
1233 * Update LDAP module documentation and functionality.
1234 The generic attribute can now update lists.
1235 * Updated dictionary.extreme.
1236 * Update sqlippool to do clears as a separate transaction,
1237 and at most once per second. This should help MySQL.
1238 * Respect control:Response-Packet-Type for all types of
1240 * Add support for SSL encryption to the MySQL driver.
1241 * Allow arbitrary connection parameters to be used with the
1243 * Changes to the OpenLDAP schema to fully expose functionality
1244 of the new LDAP module.
1245 * Update debian packaging to include a freeradius-config
1246 package. This package may be provided as a site local
1247 package to avoid fighting with the preinstalled config
1251 * Use correct field for ARP setting in DHCP.
1252 * Fix crash on debug condition (#454).
1253 * Fix a number of minor issues caught by the clang
1255 * Set WARNING messages to yellow instead of normal text.
1256 * Correct debug colorise logic. Patch from Phil Mayers.
1257 * Encode attributes of type "ethernet". No one uses them,
1259 * Work around regex initialization issues.
1260 * Fix build when linking against OpenSSL.
1261 * Print IDs as positive numbers, which helps for large DHCP
1263 * Fix issue with sql_ippool.
1264 * sqlcounter now uses 64-bit counters, to deal with 4G overflow.
1265 * Fix issues with DHCP subsystem.
1266 * Don't build / install disabled modules, or their config
1268 * Fix build for OSX Mavericks, which hid the header files
1270 * Fix LEAP buffer issue. You should still avoid LEAP.
1271 * Mark "unknown" WiMAX attributes as being WiMAX.
1272 * Fix typo in packet decoder for fragmented extended attrs
1274 * Fix rlm_perl build issues when not using threads.
1275 * Enable %{Response-Packet-Type} again.
1276 * Update configuration file parser to handle "bool"
1278 * Update declarations of global boolean variables to use
1279 "bool" consistently. This fixes an issue where some
1280 modules were instantiated in "config check" mode and
1281 did not work correctly.
1282 * Make more messages debug instead of info, to avoid
1283 polluting the logs with messages that can't be fixed.
1284 * Set operator in internal unlang code to suppress spurious
1286 * Fix debian packaging.
1287 * Added "status" to Debian init script.
1288 * Fix "update outer.request" to update the outer request.
1289 * Don't print TLS debugging messages when not in debug mode.
1290 * Correctly manage counters for "limit" sections of TCP / TLS
1292 * Fix libldap debug output.
1293 * Fix rlm_ldap tls functionality.
1294 * Initialise OpenSSL globals early to avoid issues with the
1296 * Fix typo in sqlcounter expansion code. Fixes #463
1297 * Overwrite previous instances of SQL-User-Name when adding
1299 * Work around bugs in both MIT and heimdal versions of
1300 krb5_copy_context(), which caused segfaults in
1302 * Provide meaningful error messages if Heimdal krb5 is used.
1303 * Fix attribute supression in rlm_detail.
1304 * Exit with error code if child fails to complete server
1305 initialisation after forking. This allows init scripts to
1306 correctly report whether the server started ok.
1308 FreeRADIUS 3.0.0 Mon 7 Oct 2013 15:48:14 EDT urgency=medium
1309 Feature improvements
1310 * Documentation for upgrading from 2.x is in raddb/README.rst
1311 Please follow it. It will make the upgrade easier.
1312 * Moved configuration entries in radiusd.conf to make more sense.
1313 * Added the "integer64" and "ipv4prefix" data types.
1314 * Added RADIUS over TLS (i.e. RadSec). See raddb/sites-available/tls
1315 * Updated internal API to support new attributes and formats
1316 * Added code to send SNMP Traps. See raddb/trigger.conf.
1317 * Added preliminary support for Apple's Grand Central Dispatch
1318 * Added provisions for raddb/dictionary.local, for local changes.
1319 See raddb/dictionary for more details.
1320 * Added packet/s tracking. See max_pps in the "listen" section.
1321 * The %{} expansions and "unlang" conditions are now parsed at server
1322 start. Descriptive errors are produced for syntax and format errors.
1323 * Casting is now supported for "unlang" comparisons. See "man unlang"
1324 e.g. <ipaddr>127.0.0.1 == Framed-IP-Address.
1325 * Direct comparison of attribute references is now supported.
1326 e.g. &Foo == &Bar. This avoids stringification of the attributes.
1327 * Direct assignment of attributes is now supported.
1328 e.g. Foo := &Bar. It also works for "octets" data types.
1329 * Comparisons of IPv4 and IPv6 prefixes are now supported.
1330 The "<" operator means "within the prefix" for comparisons.
1331 * New sha1 xlat expansion (thanks to Alan Buxey)
1332 * Colourised log messages when logging to stdout. Look for yellow
1333 warnings and red errors. Doing this will save you a LOT of grief.
1334 * If the PCRE library is available, use it (insted of the POSIX
1335 functions) to process regular expressions (thanks to Phil Mayers).
1336 * -xv now displays all the features the server was built with, and
1337 the versions of the core libraries (libtalloc, libssl).
1340 * Moved raddb/modules/ to raddb/mods-available/, and raddb/mods-enabled/,
1341 following the examples of other projects.
1342 * Additional files for each module are now in raddb/mods-config/.
1343 See raddb/mods-config/README.rst for documentation.
1344 * Moved "users" to raddb/mods-config/files/authorize
1345 * Moved "hints" and "huntgroups" to raddb/mods-config/preprocess/
1346 * Moved eap.conf to mods-available/eap
1347 * Moved sql.conf to mods-available/sql
1348 * Moved TLS configuration for EAP into a common subsection.
1349 See raddb/mods-available/eap, "tls-config" section.
1350 * Added for MS-CHAP Change Password from Phil Mayers.
1351 See raddb/mods-available/mschap, "passchange" subsection.
1352 * Added EAP-PWD implementation from Dan Harkins
1353 * Added connection pools for modules. This unifies connection
1354 management which was previously different for different modules.
1355 * SQL now uses the connection pool. See mods-available/sql
1356 * SQL now supports arbitrary Acct-Status-Types.
1357 These changes are not compatible with 2.x.
1358 * SQL now has full support for SQLite. See raddb/sql/main/sqlite/
1359 * SQLite supports auto-creation of new databases on server startup for
1360 bootstrapping purposes.
1361 * LDAP now uses the connection pool. The LDAP module has been
1362 completely re-written for performance and simplicity.
1363 * LDAP now caches groups. This makes multiple group checks MUCH
1365 * Removed all limitations on 253 octet attributes. RFC 6929 allows
1366 for attributes up to 4K in length.
1367 * New rlm_idn module providing an expansion for performing IDNA encoding
1368 of internationalized domain names. Thanks to 'skids'.
1369 * New rlm_yubikey module to validate yubikey OTP tokens.
1370 See raddb/modules/yubikey
1373 * All known bug fixes from 2.2.x are included.
1374 * Removed "addport" functionality.
1375 * Removed many unused or duplicate modules. See raddb/README.rst.
1377 Internal / API changes:
1378 * All traces of the old build system have been removed.
1379 The new build system is faster and simpler.
1380 * clang is fully supported.
1381 * We now use "talloc" for memory management. A number of new
1382 features required this change. Thanks to the Samba people!
1383 * Many internal APIs have been updated to use talloc.
1384 * New API for iterating over VALUE_PAIRs. This is in preparation
1385 for attributes, in version 3.1.
1386 * No new code should directly modify any field of a VALUE_PAIR.
1387 * VALUE_PAIRs contain pointers to DICT_ATTR instead of containing
1388 attribute and vendor fields. This will allow nested attributes.
1389 * Some protocol specific code has been moved out into proto_* modules.
1390 More will come in subsequent versions. See proto_dhcp and proto_vmps.
1391 * Standardised internal logging macros. radlog() should not be used.
1392 See src/include/log.h
1393 * Use OpenSSL hashing functions when available.
1394 * The server now builds with no warnings on most platforms.
1395 * New RADIUS encoder/decoder, to support new formats.
1396 * Added RFC 6929 "extended attributes", via the new encoder/decoder.
1397 * Added full WiMAX support, via the new encoder/decoder. The old
1398 code could not handle some unusual corner cases.