1 FreeRADIUS 3.0.13 Thur 29 Sep 2016 13:00:00 EDT urgency=medium
3 * Add dictionary.rfc7930. Note that we do not implement
5 * Added 'cipher_server_preference' to mods-available/eap
7 * OpenSSL 1.1.0 compatibility fixes.
8 * rlm_perl: radiusd::xlat to evaluate xlat string
10 * Allow authentication retry in winbind. Patch from
11 Herwin Weststrate. See raddb/mods-available/mschap.
12 * Added "recv-coa" method to rlm_rest. It behaves the
14 * Document Trust Router tr_port option. Patch from
18 * Minor typos. Fixes #1763
19 * Fix typo in RPM build. Closes #1767.
20 * rlm_mschap check for password expiry only
21 if password was correct. Fixes #1762.
22 * Update debian build.
23 * update rlm_counter "man" page. Fixes #1775.
24 * Remove erroneous assert. Fixes #1778.
25 * fix mschap password change test. Fixes #1792.
26 * Cleanup config file on data remove. Fixes #1795.
27 * passwd module returns "notfound" if not found.
28 * Check for old OpenSSL, and don't build rlm_eap_fast
29 if it necessary. Fixes #1803
30 * Cleanup memory better after ldap version query.
31 Patch from Aleksey Katargin.
32 * Rename lt_* functions to avoid linker issues with
34 * Many miscellaneous fixes and typos.
35 * Allow long strings in %{%{foo} bar:-%{baz} blah".
37 * Fix filtering operators, along with more documentation and
39 * Fix OpenSSL fixes. Fixes #1876.
40 * Finish SQL select queries even when SELECT returns no rows.
42 * Set Module-Failure-Message for more EAP errors.
44 FreeRADIUS 3.0.12 Thur 29 Sep 2016 13:00:00 EDT urgency=medium
46 * Add support for =~ and !~ in update sections.
48 * Add dictionary.checkpoint.
49 * Simultaneous-Use prints out more information.
50 * Print WARNING in debug mode when packets may be
52 * Added expansions %{home_server:state} and
53 %{home_server_pool:state}, which show the
54 state of the server / pool.
55 * Mark rlm_sql_freetds as stable.
56 * Make rlm_perl less fragile. Patch from
58 * Allow extended attributes to have "encrypt=2"
59 * Update dictionary.aruba.
60 * Add support for EAP-FAST. This is an isolated
61 feature which does not affect anything else.
62 * Update OpenSSL vulnerability list. Use a version
63 of OpenSSL released after September 20, 2016.
64 * EAP certificate verification is now done when
65 "verify" is enabled and "ocsp" is disabled.
66 * New dhcpclient and rlm_rad_counter man pages.
67 * Minor abfab and moonshot additions.
68 * Pass CFLAGS through from environment in RPM builds.
69 Allows more custom builds.
70 * Build with Heimdal in addition to libkrb5.
73 * Use correct typedef for older versions of sqlite.
74 * Update mssql schema to add priority
75 * Don't complain on /dev/urandom in ldap
76 * Fix == operator in update sections
77 * Don't create DHCP strings with many trailing zeros.
78 Patch from Nicolas C. Fixes #1526.
79 * Allow MS-CHAP change passwords instead of complaining
81 * Allow assignment or equality operator on SQL.
82 * Update aclocal tests for FreeBSD 10. Patches from
84 * Remove occasional hang in rlm_linelog.
85 * Copy VSAs to inner tunnel for TTLS and PEAP.
87 * A few minor bugfixes caught in v3.1.x cleanup, and
88 back-ported to v3.0.x.
89 * do_not_respond again works in post-proxy
90 * Allow realm "~^.*$" {} and User-Name with no realm.
91 * Fix leak when creating unknown attributes
92 * Fix Debian / logrotate.
93 * Make OpenSSL error functions thread-safe.
94 * Fix crash with rlm_sql and updating SQL-User-Name.
95 * Debian build updates.
96 * Allow regular expression comparisons in radclient
98 * Fix memory leak on unknown attributes in detail file
100 * Update example paths in "man" pages when installing
102 * Build fixes for rlm_mschap. Fixes #1489.
103 * BSD build fixes. Patch from issue #1583.
104 * Be more careful about /lib/ when building.
106 * Correct ifdef placement error. Fixes #1572.
107 * Allow for more files in internal "exfile" API
108 So it will be possible to open more than 64
109 "detail" files at the same time.
110 * Remove support for statically built EAP modules.
112 * Many fixes to rlm_python from Guillaume Pannatier.
113 * Use correct week adjustment in SQLcounter.
115 * Minor fixes to allow compilation without DHCP,
117 * Fix checks for module / config file change on HUP.
118 * Compile regex comparisons when sent via
119 "debug condition". Fixes #1632.
120 * Update filenames in documentation and examples.
121 Patch from Alan Buxey, #1655.
122 * Don't crash if SQL connection becomes unavailable.
124 * Disallow originate_coa when proxy_requests = no
126 * Free rad_perlconf_hv in correct perl context.
128 * Multiple fixes for Debian builds. #1510, among
130 * Set OpenSSL FIPS compatibility flag when necessary.
131 * Pulled fixes for the build system over from other
133 * Fix OCSP for RADIUS over TLS.
134 * Fix skip_if_ocsp_ok behavior.
135 * Better fixes for systems without closefrom() but
136 which have /proc. Fixes #1757.
137 * Minor build fixes back-ported from v4.0.x.
138 * build --whout-ascend-binary. Fixes #1761.
139 * Be more aggressive about not opening new connections
140 in debug mode after CTRL-C. Address #1604.
142 FreeRADIUS 3.0.11 Mon 25 Jan 2016 14:00:00 EST urgency=medium
144 * "unlang" comparisons of IP addresses to IP prefixes
145 are now detected, and types automatically cast.
146 * Allow shorthand form of ipv4prefix values e.g. 127/8.
147 * Add "auto_chain" to raddb/mods-available/eap, tls
148 subsection. This allows the disabling of OpenSSL
149 auto-chaining of certificates. Which might be wrong.
150 * Added printing of coa and disconnect stats (radmin).
151 * radclient defaults to expecting Access-Accept responses
153 * Updated dictionary.lancom, dictionary.starent.
154 * Portability fixes for Solaris.
155 * More errors from ntlm_auth gets passed to MS-CHAP.
156 * Update abfab-tr-idp virtual server.
157 * Added "filter_password" in policy.d/filter. This
158 removes embedded zero bytes in User-Password, for
159 compatibility with broken clients.
160 * The server now issues a WARNING message if duplicate
161 configuration items are found.
162 * TLS can skip the "verify" section if OCSP returns OK.
163 See raddb/mods-available/eap, "skip_if_ocsp_ok".
164 * Set TLS-OCSP-Cert-Valid = yes / no / skipped, which
165 is the result from the OCSP check.
166 * Interoperate with AD and "LmCompatibiltyLevel = 5",
167 by always setting WBC_MSV1_0_ALLOW_MSVCHAPV2 for
168 native winbind in rlm_mschap.
169 * TTLS and PEAP now require "virtual_server" to be a real server.
170 * Print WARNING when TTLS or PEAP identities are spoofed
171 or not properly anonymized. See RFC 7542 for requirements.
172 * Various rlm_python fixes from Herwin Weststrate.
173 * Allow setting Response-Packet-Type in "Post-Proxy-Type Fail",
174 which is useful when the home server does not respond.
175 * elasticsearch updates from Matthew Newton
178 * Fix issue where field nas_type would not be accessible via
179 the %{client:} xlat, for clients loaded from SQL.
180 * Fix compatiblity issues with OpenSSL 1.0.2. Ignore
181 calls to msg_callback with 'pseudo' content types.
182 * Data type "ipv4prefix" is parsed correctly.
183 * Use correct talloc context in rlm_exec. Fixes #1338.
184 * Complain in unlang if "else" is used with no previous
186 * Send accounting status packets to the accounting port.
188 * Print out CFLAGS when doing "radiusd -Xxv"
189 * Fixed bug with coa/acct stats value #1339. Based on patch from
191 * Fixes for LEAP proxying. Don't use LEAP!
192 * Fix issue with "directory already exists" seen when doing
194 * Fixed bug with radmin related to the option "stats detail <filename>"
195 * Complain if the detail file reader does not have permission
196 to read the "detail.work" file. Fixes #1398
197 * Fixed SoH. Attributes were not being copied to the virtual server.
198 * Used a wrong list to global statistics in "stats".
199 * Create EAP-PWD identity correctly. Prevents segfaults.
200 * Dynamically validate authentication types for PEAP and EAP-MSCHAPv2.
201 * Fix includes in installed headers.
202 * OpenSSL 1.0.1f and 1.0.1g do NOT calculate TLS 1.2 keys correctly.
203 See raddb/mods-available/eap, "disable_tlsv1_2"
204 * Allow password change to work for MS-CHAP. This requires 'r=0',
205 because password changes are not retries.
206 * Fix home server fail-over for home servers using TCP and/or RadSec.
207 * Special characters in expanded regexes are now escaped
208 e.g. User-Name containing '.', and comparing /%{User-Name}/,
209 the '.' will now be escaped. See src/tests/keywords/regex-escape.
210 * Use correct authentication vector when sending Access-Reject replies
212 * Set FreeRADIUS-Proxied-To in TTLS again. You should use the
213 "inner-tunnel" virtual server, instead of relying on this attribute.
214 * Fix debugging constants in rlm_perl. Patch from Herwin Weststrate.
215 * Add samba-dev / samba4-dev to debian builds so that rlm_mschap can
216 automatically use the new winbind API.
217 * Automatically skip zero-length attributes when sending packets,
218 instead of erroring out.
220 FreeRADIUS 3.0.10 Mon 05 Oct 2015 15:00:00 EDT urgency=medium
222 * Do more optimization of unlang policies. This makes
223 run-time a bit faster.
224 * Re-name most of the functions in src/lib. Third-party
225 module authors will have to do the same.
226 * More documentation on contributing and how to write
228 * Update radiusd.service for systemd.
229 * Open IPv6 proxy socket if the server is listening on IPV6
230 auth / acct / coa packets.
231 * Create debian packages for DHCP. Fixes #1125.
232 * Add more tests for "update" section parsing.
233 * Update "man" pages.
234 * Update attributes for Alcatel 7750
235 * Add dictionary for Boingo Wi-Fi
236 * Add support for DHCP lease queries.
237 See raddb/sites-available/dhcp
238 * On HUP, check all modules for config files which have
239 changed. And only re-load those modules.
240 * Allow FreeRADIUS-Response-Delay(-USec) to be set for
241 RADIUS packets. Patch from Herwin Weststrate.
242 * Documentation fixes from Alan Buxey and Matthew Newton.
243 * Update "logrotate" script.
244 * Added more RFCs to doc/rfc for new standards implemented
246 * Don't crash when doing "radmin -e "help hup".
247 Patch from Matthew Newton.
248 * The dictionary parser now does more sanity checks, which
249 prevents run-time problems with invalid attributes.
250 * Update debian packages. Patches from Christopher Hoskin.
251 * Many other debian packaging fixes from Matthew Netwon
252 and Herwin Weststrate.
253 * Add "session-state" to Perl. Patch from Herwin Weststrate.
256 * Fix rlm_files so that there are no collisions when loading
257 10's of 1000's of users.
258 * Fix radclient to use our internal v4/v6 parsing functions.
259 v6 addresses with ports now work correctly.
260 * Fix sending/receiving packet messages to wrap v6 addresses
261 in square brackets '[]'.
262 * Check for sasl/sasl.h when building rlm_ldap, and disable
263 SASL functionality if unavailable.
264 * Fix issue which caused a non \0 terminated buffer to be
265 assigned to attributes if the value being assigned contained
266 an invalid escape sequence.
267 * Fix deadlock when reconnecting connections in the connection
269 * Fix potential overrun in functions that used fr_utf8_char
270 with a non nul terminated buffer.
271 * Fix decoding issue for Tunnel-Password type attributes
272 which were very long. Found by Denis Andzakovic.
273 * Fix radclient issue with TCP sockets on FreeBSD.
274 * The server now creates ${run_dir} and ${logdir} directories
275 in daemon mode, when running as "root".
276 * Handle tags when using maps. Fixes #1191.
277 * Fix crash when CoA packets time out.
278 * Fix parse error in rediswho
279 * Fix regex support in SQL radcheck the "users" file and radsniff.
280 * Register listen xlat earlier, so that it's available when the
281 virtual servers are being parsed.
282 * Parse Ascend-Data-Filter when given as "0x..."
283 * Print Ascend-Data-Filter correctly. Add test cases for both.
284 * Allow old-style clients again. They will be disallowed for
286 * Complain instead of crash when "else" and "elsif" are in
288 * Clean up memory more aggressively. This lowers the
289 maximum memory used, most typically for TLS based EAP methods.
290 * Prevent the server from unlinking the control socket of an
291 already running instance.
292 * Fallback to using the configured OCSP URL if one exists, and
293 no URL is provided in the certificate.
294 * Return CoA-NAK if proxying CoA fails. Based on patch from
296 * Lower peak memory usage by decreasing size of internal
298 * The control socket is now left in place if a second copy
299 of the server is accidentally started.
300 * Allow virtual attributes in "switch", "case", etc.
301 Fixes #1240 and #1265.
302 * Many spell check / typo fixes in comments and example
304 * Better handle multiple DHCP listeners.
305 * Don't print secrets for old-style realms. Fixes #1267.
306 * Don't fall through in empty "case" statements.
308 * Update EAP-TTLS so that MPPE keys are correctly calculated with TLSv1.2.
309 * Always delete MS-MPPE-* from the TTLS inner tunnel. This allows
310 TTLS / EAP-MSCHAPv2 to work. Fixes #1206.
311 * Fix off by one error that caused some MSCHAP-Error messages to
312 be sent without the password change version (V=3) and the textual
313 message component (M=).
314 * Always include C= V= and M= in MSCHAPv2 errors. RFC 2759 does not say
315 that any of these fields are optional, and not including V= caused
316 errors with wpa_supplicant.
317 * Do not include M= in MSCHAPv1 errors. It's not supported.
319 FreeRADIUS 3.0.9 Wed 08 Jul 2015 12:00:00 EDT urgency=medium
321 * Make "pool" configurations more consistent, and
322 update documentation for them.
323 * Move connection pool logic to "most recently started",
324 instead of MRU. This should help with pool stability.
325 * More VSAs for 3GPP2
326 * Added examples of multi-value attributes to rlm_perl.
327 * LDAP-Group and SQL-Group attributes are now dynamically
329 * Only the "sql" module registers SQL-Group. Other instances
330 register "instance-name-SQL-Group", similarly to "ldap".
331 * Unknown attributes are now complained about more often
332 when used in unlang statements. e.g. if (Foo-Bar == 3)
333 used to be a string to string comparison. It is now a
335 * Rename RLM_COMPONENT_* to MOD_* in the code.
336 This makes many things easier.
337 * Move to C99 initializers for modules.
338 * Load modules in raddb/mods-enabled. This allows attributes
339 like "LDAP-Group" to be used in the "files" module,
340 without explicit ordering or listing in "instantiate".
341 * Added 'bootstrap' section to modules. Third-party modules
342 will need to be updated.
343 * When adding clients from a DB, add them to a virtual server
344 if that virtual server has a "listen" section. Otherwise,
345 add the clients to the global list.
346 * When reading dynamic clients from a file, don't expire them
347 if the underlying file is unchanged.
348 * Allow the server to originate CoA requests from the post-auth
350 * The server creates ${run_dir} and ${logdir} in daemon mode,
351 if they do not already exist.
352 * Add dictionary for Wi-Fi Alliance Hotspot 2.0. The server
353 now supports all mandatory and optional attributes for this
355 * HUP now re-loads the configuration only if the files have
356 changed. If all files are unchanged, HUP re-opens the
357 log file, and does nothing else.
358 * Much better debug messages for EAP-TLS, including which
359 attributes are cached, and when they are retrieved.
360 * Increase default max_requests to 16384. Memory is cheap now.
361 * Added "stats memory" commands to radmin. Debug build only.
362 * Aptilo controller dictionary updates.
363 * SQL modules now use Acct-Unique-Session-Id everywhere.
364 * The redis modules are now stable.
365 * The LDAP module now supports SASL "interactive bind" method.
366 This allows Kerberos based administrator and user binds.
367 * DHCP code is now in libfreeradius-dhcp.
368 * More DHCP encoding / decoding unit tests.
369 * rlm_replicate can now be listed in the "accounting" section.
370 * Better sqlite debugging output.
371 * Remove "required" option from many sql_ippool directives.
372 * Set default CA "basic constraints" to "critical". Fixes #1073
373 * Updates to help / man pages from Jorge Pereira.
377 * Be more careful about unused config item warnings
379 * Move more defines to be auto-generated.
380 * Allow virtual servers in proxy fallback.
381 * Allow %{module:} to work.
382 * Don't crash in RadSec. Closes #980.
383 * Return better errors when a unix group / user
385 * Re-enable detail module "locking" parameter.
386 * Don't crash when logging replies from Status-Server packets.
387 * The couchbase module now uses "update" instead of "map",
388 for consistent with the rest of the server. See
389 raddb/mods-available/couchbase
390 * Don't require NT-Password for MS-CHAP password changes.
391 * Be a bit more careful about decrypting MS-CHAP-MPPE-Key
392 attributes. Closes #1013. There is no perfect fix, tho.
393 * Fix security issues with EAP-PWD.
394 See http://freeradius.org/security.html#eap-pwd-2015
395 * Fix dynamic clients read from SQL in non-debug mode
396 * MS-CHAP now allows retries (i.e. password change) when
397 passwords are expired.
398 * Allow "user=radiusd" when the server is already user
400 * suid up/down works on non-Linux systems. This means
401 that the control socket should have the correct
403 * Fix issue which caused the server to sometimes have problems
404 when a home server was marked zombie.
405 * Fix format.pl because Perl is now more picky.
406 * Fix proxy to Packet-Dst-IP-Address, so that it uses the
407 correct destination port.
408 * Fix corner case with cursor functions and removal.
409 * OpenDirectory fixes and documentation.
410 * Fix leaks in rlm_redis.
411 * RFC 6929 "evs" attributes are now encoded / decoded
413 * Fix talloc pool leaks when receiving malformed or
414 retransmitted Accounting/CoA requests.
415 * Printed attributes again use double quotes instead of
417 * Set X509_V_FLAG_CRL_CHECK_ALL, and add "check_all_crl"
418 to eap.conf. Fixes oCert CVE-2015-4680.
419 * rlm_expr now errors out correctly on malformed attribute
420 references instead of triggering an assert.
421 * Make "break" work in "foreach" loops
422 * Allow dynamic expansions to work again in the "hints" file.
423 * Correct minor typos in comments and examples from Alan Buxy.
424 * Re-urlencode the path portion of ldapi:// urls before
425 passing it to ldap_initialise.
427 FreeRADIUS 3.0.8 Wed 22 Apr 2015 13:30:00 EDT urgency=medium
429 * Allow syslog_severity to be set in rlm_linelog.
430 * Allow defaults to be set for bulk clients in LDAP and couchbase.
431 * Updates to dhcpclient. Patches from Nicolas C.
432 * rlm_mschap now supports direct connections to winbind, which
433 is faster than ntlm_auth. See raddb/mods-available/mschap.
434 Patch from Matthew Newton.
435 * Recommend /dev/urandom for TLS randomness, instead of
437 * Allow TLSv1 to be disabled via "disable_tlsv1" in tls{}.
438 * Allow Expanded EAP types where vendor is 0 (IETF) and
439 type is normal EAP type. Supplicants sending Expanded
440 EAP types like this are broken.
441 * Add support for server side sort controls when searching for
442 user objects in rlm_ldap.
445 * Don't complain about "authorize" in "server {}" blocks, but
446 only if there's no "server" block.
447 * Fix cosmetic issue where debug from the first packet read by
448 a detail reader thread would be emited during config parsing.
449 * Fix ASSERT on truncated detail packets.
450 * Don't use main server log functions from within panic_action,
451 as in the case of syslog this would cause deadlocks if the
452 fault was triggered from within a malloc.
453 * Fix issue in "switch" when "correct_escapes = false".
455 * Fix sqlcounter configuration to use "%%b" instead of "%b",
456 otherwise the new syntax validation will fail.
457 * Allow forward references in configuration items. Modules
458 aren't always loaded in a sane order.
459 * Fix more escaping issues. Closes #912.
460 * Decode MAC addresses correctly for VMPS.
461 * Fix memory leak with TLS connections.
462 * Fix state machine threading issues for conflicting packets.
463 * Fix copy_request_to_tunnel issues for tagged attributes.
464 * Allow "ok" to over-ride "updated" inside of Auth-Type sections.
465 * Update state machine so that post-proxy is run though child
466 threads for performance, instead of blocking the main thread.
467 * Allow "netmask" to work again in client definitions.
468 * Relax restrictions on SQL group queries.
469 * track outgoing proxy sockets and clean them up more aggressively.
470 * track proxy statistics, including CoA and Disconnect.
471 * If radmin has a connection failure when running a command,
472 it re-connects and runs the command again.
473 * mark home servers "unknown" less aggressively.
474 * Fix potential SEGV in PostgreSQL driver on error.
475 * Fix issue where fields like nas_type would not be accessible via
476 the %{client:} xlat, for dynamic clients.
477 * Set default busy_timeout (of 200ms) in the sqlite driver, so writes
478 don't cause selects to fail in multithreaded mode. This is user
479 configurable, and may be increased if required.
480 * Convert Password-With-Header attributes to binary (from hex or
481 base64), in the authorize method of rlm_pap.
482 * Fix invalid assert in state.c, that could cause abort in
484 * Fix double free when -m flag is used, and connection pools are
485 referenced by multiple modules.
486 * RADIUS over TLS accounting uses the same port as authentication.
487 * Regularized return codes from radmin commands.
488 * Fix RHEL spec file so it works correctly for Centos7 which uses
489 systemd, and didn't like the SystemV init script.
490 * radwho and radlast now have a -D option to load dictionaries
491 * DHCP packets are no longer checked for duplicates.
492 * Don't crash in sql module group comparisons in corner case.
493 * Calculate MPPE keys correctly when using TLS 1.2.
494 * Fix load-balance sections. Closes #945
495 * TLS certificates are available again in the post-auth section.
496 They are not available for session resumption.
497 * radclient encodes CHAP-Password properly when using -c.
499 * Fix issue in rlm_cache_memcached driver that caused variable
500 length values to be truncated.
501 * Fix track functionality in detail reader, so it no longer
502 fails with a "Failed marking detail request as done: Bad file
504 * Actually add the peer identity (as User-Name) to the inner
505 tunnel in EAP-PWD requests, so it's available for lookups.
506 * Fixes to PostgreSQL queries. Patches from Santiago Gimeno.
508 FreeRADIUS 3.0.7 Thu 19 Feb 2015 12:00:00 EDT urgency=medium
510 * Allow coa home_servers to be derived from client
511 sections if a coa_server section is provided.
512 * Automatically determine the correct port if no port is
513 provided for a home server.
514 * Allow foreach to operate over lists.
515 * Add compile time features to ${feature.*} and versions
516 of core libraries to ${version.*}. Feature and version
517 names match output of radiud -xv. %v is now deprecated.
518 * Add support for PATCH method in rlm_rest.
519 * Validate more module xlats on startup, and warn if an
520 xlat expansion is found in a double quoted config item
521 which will not be expanded.
522 * Add support for sub-second timeouts in rlm_rest.
523 * Add support for connection timeouts in rlm_rest.
524 * Add %{jsonquote:<str>} xlat to escape strings for insertion
526 * Add %{ldapquote:<str>} xlat to escape strings for insertion
528 * Add %{explode:&ref <char>}, splits value of &ref on
529 <char> and creates new &ref type attributes with the
531 * Allow rlm_ldap to use attribute references for base_dn and
532 filter config items. The attribute references are not
533 escaped, allowing DNs and filters to be created dynamically.
534 * Add %{nexttime:[<int>]h|d|w|y} to calculate the number of
535 seconds before the next <int> hour(s), day(s), week(s),
537 * Allow the left side of update sections to be xlat expansions.
538 The result of the expansion is then used to reference the
539 attribute to be modified.
540 * Added %{lpad:&Attribute-Name 7 x} and rpad. These produce
541 fixed-width output strings, with padding to the left (lpad)
543 * For some SQL drivers (MySQL, sqlite) distinguish between
544 constraints violations (on insert), invalid queries, and
545 server errors, and return noop, invalid, and error respectively.
546 * Call SHOW WARNINGS in the MySQL driver and write them to
547 the request log, if libmysqlclient indicates warnings are
548 available on the server.
549 * Forbid the creation of Vendor-Specific for non-standard
550 VSAs. Use Attr-26 = 0x... instead.
551 * Make dhcpclient work with raw sockets and various other
552 improvements - Contributed by nchaigne
553 * Add support for SSHA2 - Contributed by PDD.
554 * Add perle dictionary - Contributed by Hachmer
555 * Modernise init scripts for RHEL, SUSE and Debian.
556 * radmin now tracks the return code of commands, and exits
557 with status "1" if any command failed to execute.
558 * radmin now sends error messages from the server to
559 stderr, instead of to stdout.
560 * radmin now looks for sockets matching it's UID and GID,
561 rather than just always using the first one it finds.
562 * radmin can how delete clients which are tied to a listener.
563 * Moved RADIUS attribute definitions to src/include/rfc*.h
564 * Move to talloc pools for requests. For in-memory tests
565 (default config, 'users' file), performance increases by 30%.
566 * In rlm_ldap allow sasl_mech to be specified for admin and
567 user binds. Only non-interactive mechs (like EXTERNAL)
568 are currently supported.
569 * Remove support for ephemeral RSA keys. They were "export only",
570 and should not be used by anyone.
571 * Syntax errors in the "users" file now produce better
575 * Fix issues parsing LDAP hostnames with non-standard ports.
576 * Fix issues with realms containing regular expressions.
577 * Allow unary negation before parantheses in rlm_expr.
578 * Fix infinite loop in kevent event loop code. Issue only
579 presented on FreeBSD.
580 * Be more careful to define Auth-Types before loading modules.
581 * Link libfreeradius-radius against OpenSSL too, to avoid
582 multi-version symbols in SSL libraries.
583 * When rlm_ldap rebinds a connection, it should use bind
584 credentials from the module that created the connection
585 pool, not credentials from the module referencing it.
586 * Empty server config pairs should be allowed in rlm_ldap
587 instances that reference another module's connection pool.
588 * Mark rlm_always as huppable, so its rcode can be changed
589 via radmin (allows policy toggles).
590 * Emit warnings when ignoring user configured pool values.
591 * Fix issue that would cause radclient to complain
592 intermittently about differing numbers of filters and
594 * Fix cosmetic issues in connection pool logging, that made
595 it appear as if the same connection was being opened
597 * Fix threadsafety issues in SQL drivers, where a static
598 buffer was used to store error messages.
599 * Log RERROR, RWARN, RINFO to the global log if request
600 logging is not enabled.
601 * Link to libldap instead of libldap_r. libldap_r
602 is not supported for use by projects outside of OpenLDAP.
603 * Set connection timeout correctly in rlm_sql_mysql.
604 * Build with older versions of libcurl, and use CFLAGS from
606 * Honour Packet-Src-Port and Packet-Src-IP-address in radclient.
607 * Initialise ldapai_info_version field, so libldap will report
608 its vendor and version.
609 * Fix log rotation scripts by using the copyrotate option.
610 * Fix issue that caused opening control sockets to always
611 fail on non-Linux systems, if a user or group was set.
612 * Save Session-State after proxying.
613 * Additional fixes for reading CoA/DM requests from detail
615 * Create dynamic clients if the dynamic clients virtual server
616 returns ok *or* updated. Emit useful messages for other codes.
617 * Compile bare "authorize" statements, and issue errors saying
618 using them isn't a good idea.
620 FreeRADIUS 3.0.6 Wed 17 Dec 2014 16:00:00 EDT urgency=medium
622 * radmin / raddebug conditional errors are printed
623 to the output, instead of being discarded.
624 * raddebug will exit if condition set with -c was invalid.
625 * radmin auto-reconnects if the connection to the server
627 * rlm_cache now has submodule support. See
628 raddb/mods-available/cache
629 * New memcached driver for rlm_cache. See
630 raddb/mods-available/cache
631 * Add support for &Attribute-Name[*] in conditions.
632 See "man unlang" for details.
633 * Add &Attribute-Name[n] which gets the last instance
634 of an attribute e.g. Module-Failure-Message[n].
635 * Allow for redundant string expansions. See the
636 "instantiate" section of radiusd.conf.
637 * When checking IP addresses in conditions, make the
638 right side be parsed as an IP prefix.
639 * Support JIT compilation of compiled regular expressions
640 when built with libpcre.
641 * Support named capture groups with "%{regex:<name>}"
642 when built with libpcre.
643 * Increase regular expression capture groups from 8 to 32.
644 * Emit error markers for badly formed regular expressions.
645 * Allow 'm' flag to enable multiline mode in regular
647 * Support limited implicit attribute conversion in update
649 * Support casting between IPv6 and IPv4 where the IPv6
650 address has the v4/v6 mapping prefix (::ffff:).
653 * PEAP works again. As does proxying EAP-MSCHAPv2
654 from inside of a PEAP tunnel.
655 * "group" is allowed inside of "instantiate" sections.
656 * update disconnect {} with
657 disconnect:Packet-Dst-IP-Address now works correctly.
658 * Regular expression comparisons of non string attributes
659 are now disallowed in the files module. Previously
660 they would silently fail or produce undefined behaviour.
661 * Fix parsing of old regular expressions. Closes #842
662 * Fix off by one error in ascend filters. Closes #843.
663 * Handle NT-Hash in rlm_pap. This allows passwords to
664 have backslashes in them.
665 * Fix infinite loop on "Fall-Through = yes" when
666 processing SQL groups.
667 * Correct the check of SQL query return code.
668 * Run "Post-Auth-Type Reject" if the request was rejected
670 * Write "Login OK" only if the post-auth section passed.
671 * Create TLS-Cert-* certificates, even when EAP session
673 * Finalize the "correct_escapes" with many more tests.
674 * Move to the new OpenLDAP libldap API, fixes more issues
676 * Fix potential memory corruption in rlm_ldap if start
677 connections were set to 0, and the server was running
678 in threaded mode. The fix is a workaround for an issue
679 in libldap and was suggested by Howard Chu.
680 * Give parse errors on "%{...", without the closing brace.
681 * Allow spaces in certificate passwords for build rules
683 * Make all regular expression evaluation binary safe.
684 Where that's not possible, emit an error if the pattern
685 or subject contains an embedded null byte.
686 * Fix various issues around masking IPv6 addresses.
687 * Give descriptive error if unknown attributes are used
688 in "update" sections.
689 * Deal with cases where ldap_initialize isn't available
690 gracefully, and use it exclusively when it's available.
692 FreeRADIUS 3.0.5 Fri 21 Nov 2014 15:30:00 EDT urgency=medium
694 * Large update to Huawei dictionary.
695 * Added dictionary.rfc7155
696 * Regular expressions like /%{User-Name}/ are now parsed
697 and validated when the server starts.
698 * All configuration items which are dynamically expanded
699 are now parsed and validated when the server starts.
700 * %{expr:...} expressions can now do bit shifting and more.
701 See raddb/mods-available/expr.
702 * The detail file reader can now track packets which have
703 had replies, so they are never re-transmitted. See
704 raddb/sites-available/buffered-sql, the "track" config item.
705 * CoA and Disconnect packets can now be sent to a specific
706 home server by setting control:Packet-Dst-IP-Address and
707 (optionally) control:Packet-Dst-Port.
708 * Allow CoA and Disconnect packets to be read from the
710 * Allow LDAP to specify arbitrary attributes for dynamic
712 * Convert all unused attributes in the control: list to config
713 pairs in dynamic clients. This allows arbitrary client
714 attributes to be set for dynamic clients too.
715 * rlm_couchbase now supports bulk loading of clients on startup
716 in a similar way to rlm_ldap. Contributed by Aaron Hurt.
717 * Allow one level of backslashes (finally). See radiusd.conf,
718 "correct_escapes" setting.
719 * Rename dictionary.redback to dictionary.ericsson.ab
720 * Add --disable-openssl-version-check option to configure.
721 So vendors can disable the check. Patch from
723 * Do context-specific indenting in debug messages. This makes
724 the debug output easier to read.
725 * Make configuration a separate RPM, just like for Debian.
726 * better decoding of unknown VSAs
727 * When supported by OpenSSL, allow TLS 1.1 and TLS 1.2
729 * Allow multiple new connections to be spawned simultaneously
730 in the connection pool, to cope with spikes in traffic.
731 * Document retry_delay in connection pools.
732 * Allow checksimul in rlm_couchbase.
733 * Use kqueue on systems which support it. This allows for
734 better scaling when using many sockets.
737 * Parse list qualifiers in generic LDAP 'valuepair_attribute'
738 attributes correctly.
739 * Fix issue where prefix length would be ignored for dynamic
740 or static clients if the address matched INADDR_ANY
742 * Allow null user object filter in rlm_ldap, it's valid to
743 specify a complete object DN and use the base scope.
744 * Don't SEGV if a received attribute value in a JSON structure
745 is null, or a value can't be stringified.
746 * Don't assert if the server returns a JSON content-type and
747 the server hasn't been built with support for JSON.
749 * Set CURLOPT_NOSIGNAL to prevent curl from handling signals
750 and causing a longjmp error when the server was running with
752 * Allow tabs after attribute names in the "users" file.
754 * Free unknown DICT_ATTRs. Closes #795
755 * Handle unknown attributes in the conditions and "update"
756 sections. e.g. Attr-1.2.3.4 = foo.
757 * Use correct array size for MS-CHAP new password.
758 * In rlm_rest, check for older versions of libraries at start
759 time, rather than when a packet comes in.
760 * Don't call detach on parse error in rlm_perl. Closes #802.
761 * Integer fixes for big-endian systems. Closes #803.
762 * Don't optimize %{Packet-Src-IP-Address}. Closes #804.
763 * dhcpclient loads dictionaries correclty. Closes #805.
764 * double quotes are no longer escaped in single-quoted
765 strings. e.g. 'foo "hello" bar'.
766 * Fixes for proxying to virtual servers broke the detail file
767 reader. Now they both work.
768 * Typos and fixes from Nikolai Kondrashov.
769 * Fixes to OpenSSL version checks, for cross-platform issues.
770 * cppcheck fixes from Herwin Weststrate.
771 * Fix build for OSX Yosemite
772 * Merge DHCP sub-options. Closes #812.
773 * Fix decoding of Starent attributes.
774 * When a module asks for a connection, don't return idle
776 * LDAP connection timeouts will now retry, instead of failing.
777 * Prevent race conditions between fork and wait for child.
778 Patch from James Rouzier.
779 * Fix triggers for connection pools. Patches from
781 * Fix SEGV when comparing non string type check items.
782 * Build with newer versions of libmysqlclient.
783 * make the %{escape:} and %{unescape:} xlat functions UTF8
785 * Don't escape UTF8 chars in SQL query strings.
786 * Fix issue in cached LDAP group comparisons, which caused
787 checks to sometimes fail.
788 * Fix use after free issue in unlang switch evaluation.
789 * Respect operators in rlm_cache when merging into the current
791 * Update Cache-Entry-Hits each time rlm_cache is called.
792 * Produce WARN messages if SQL queries are empty strings.
793 * Fix invalid assertion when proxying CoA requests.
794 * Allow empty strings in "case" statements. Closes #836.
795 * Normalize escaping for string expansions. i.e. don't do
796 double escaping in rare situations.
797 * Normalize LDAP escaping. LDAP servers have multiple ways
798 to escape things, so the data has to be normalized before
799 we can compare two LDAP DNs.
800 * Don't go to high debug level if we're proxying inner EAP
802 * Fix rlm_rest state handling. Closes #835.
804 FreeRADIUS 3.0.4 Wed 10 Sep 2014 12:00:00 EDT urgency=medium
806 * Home server "response_window" can now take fractions of a
807 second. See proxy.conf.
808 * radmin now supports "show module status", as thee counterpart
809 to "set module status"
810 * Added dictionary ericsson.packet.ccore.networks, bluecoat,
811 citrix, compatible, riverbed, ruckus, and RFC 7268.
812 * Add %{tag:} expansion to get the tag value of an attribute.
813 * Report 'application_name' in connections to PostgreSQL servers.
814 FreeRADIUS connections will now appear as
815 'FreeRADIUS <version> - <name>' in pg_stat_activity.
816 * All config item fields are now type checked at compile time
817 to prevent issues similar to #634 occuring again.
818 * Modify pairparsevalue to deal with embedded NULLs better,
819 and use the binary versions of attribute values in rlm_ldap.
820 * "ipaddr" will now use v6 if no v4 address is present. You should
821 use "ipv4addr" or "ipv6addr" to force v4/v6 addresses.
822 * The above applies to "listen", "home_server", and "client" sections.
823 * "client" sections will allow "ipaddr = 192.192.0/24". The old
824 "netmask" is still accepted, but the new format is preferred.
825 * Allow custom HTTP headers to be set for rlm_rest requests using
826 control:REST-HTTP-Header (attributes consumed after use).
827 * Extend format of %{rest:} expansion to allow HTTP method and POST
829 e.g. %{rest:POST http://example.org/api foo=bar&baz=boink}.
830 * Add %{hmacsha1:&data &key} and %{hmacmd5:&data &key} expansions
831 for signing data in requests.
832 * rlm_cache now consumes its control attributes to make runtime
833 configuration easier.
834 * Add control:Cache-Read-Only which when set to 'yes' will make the
835 cache module merge existing cache data, but not create new entries.
836 * Add %{unescape:} and %{urlunquote:} expansions to reverse escaping
838 * Add support for aliases in rlm_ldap.
839 * Add support for connection pool sharing to all modules that use
840 the connection pool (pool = <instance>).
841 * "tls" sections now have a "psk_query" configuration item, for dynamic
842 queries to discover a key from a PSK identity.
843 * Preliminary support for EAP channel bindings.
844 * Foundational work for dynamic home servers. They do not yet work,
845 but this is now only a matter of updating the "realm" module in
847 * Support &attr[*] syntax to copy all instances of an attribute when
848 used with the += operator in an update section. May be qualified with
850 * The logintime and expiration modules can now be listed in the
851 post-auth section. This makes some configurations simpler.
852 * Allow comparison of integer attributes of different sizes,
853 without requiring a cast.
854 * rlm_sqlippool is now IPV6 capable. Set "ipv6 = yes" to get
855 Framed-IPv6-Prefix returned. The SQL queries have NOT been updated.
856 Please submit patches.
857 * The debian build now checks for the OpenSSL package with the heartbleed
858 fix, and if found, sets: allow_vulnerable_openssl = 'CVE-2014-0160'
859 * allow bootstrap from multiple files in sqlite driver.
862 * make case-insensitive regular expressions work again, and add tests
864 * A few more talloc parenting issues
865 * Fix delayed proxy reply handling. Closes #637
866 * Fix OpenSSL initialization order when using
867 RADIUS/TLS. Fixes #646
868 * Don't double-quote strings in debugging messages
869 * Fix foreach / break. Fixes #639
870 * Chargeable-User-Identifier, ADSL-Agent-Circuit-Id and
871 ADSL-Agent-Remote-Id should be "octets" types in the default
873 * Fix typo in mainconfig. Fixes #634
874 * More rlm_perl fixes. Fixes #635
875 * Free OpenSSL memory on clean exit.
876 * Fix <attr>[0] !* ANY - Was removing all instances of <attr>
877 * Fix case where multiple attributes were returned from RHS of
878 mapping, as with rlm_ldap. Fixes #652
879 * Fix corner case in cursor where using fr_cursor_next_by_da
880 after calling fr_cursor_remove may of resulted in a read of
881 uninitialised memory.
882 * Don't SEGV if all connections to a database server go away.
884 * Fix issue where <attr> -= <value> was not removing tagged
885 instances of <attr> equal to <value> (only untagged).
886 * Fix issue where tag values were not being set on attributes
887 created with unlang/ldap update blocks.
888 * Create rlm_sqlcounter attributes as integer64 types instead
889 of integer types, so large counter values can be specified.
890 * Fix issue where specifying a dynamic client IP addresss using
891 FreeRADIUS-Client-IPv6-Prefix or FreeRADIUS-Client-IP-Prefix
892 may have caused a validation error.
893 * Don't print two "&" for messages about attribute or list
894 references in debug output.
895 * Fix urlquote and escape to encode Unicode characters correctly.
896 * Fix redundant-load-balance blocks to try other modules in
897 the group if one fails.
898 * Fix issue with rlm_pap password normalisation where
899 'known good' password strings stored in octets type attributes,
900 would be sometimes misnormalised as base64.
901 * Don't stop processing DHCP options if we find a 0x00 padding
903 * Fix issue where modifying the value of an attribute created
904 from a template with a literal value, may have resulted in the
905 template literal being freed.
906 * Fix parenting issues in tls code which may have resulted in
907 memory corruption and crashes.
908 * Fix issue in radsniff where writing to PCAP files and using
909 -R response filters, where the requests would still be written
910 to the PCAP for non matching responses.
911 * Define __APPLE_USE_RFC_2292 so that the server builds with IPv6
913 * Fix LDAP group lookups for named rlm_ldap instances.
914 Note that attribute references should be used when
915 checking LDAP-Group attributes. e.g. if (&LDAP-Group == 'foo').
916 * Delayed attribute references can now be used in unlang
917 existence checks. i.e. if (&Attribute-Name) { ... }
918 * Fix issues in EAP-PWD. CVE-2014-4731, CVE-2014-4732, and
919 CVE-2014-4733. There is no external authentication bypass.
920 * Fix a number of uses of the talloc parent/child reference.
921 * Release connection used for reading bulk clients in rlm_ldap.
922 * rlm_rest is now fail-safe if it's used without any configuration
923 * Pull in build fixes for FreeBSD from ports.
924 * Fix error in sqlite postauth query
925 * Evaluate argument to "switch" statements once, instead of for each
927 * Define sig_t on systems without it. Closes #765.
928 * Fix boundary issue with rlm_rest. Closes #768
929 * Optimize "%{Attribute-Name}" in comparisons only if the dictionary
931 * Don't do chmod() in rad_mkdir() if the directory already exists.
932 We might not have permission to change it.
933 * Use getpwnam_r() and getgrnam_r() on systems which support it.
935 * Clients loaded from SQL are now tied to the "listen" section
936 of a virtual server, instead of being global.
937 * Check for -lpcre. The system might have pcre.h without -lpcre.
938 * When proxying to a virtual server, use the proxy_reply instead
940 * Fixed typos in DHCP SQL IPPool.
941 * Fix crash when passing multiple arguments to Perl xlat.
943 FreeRADIUS 3.0.3 Mon 12 May 2014 15:30:00 EDT urgency=medium
945 * Everything now builds with no warnings from the C compiler,
946 clang static analyzer, or cppcheck.
947 * rlm_ldap now supports defining the LDAP attribute name via
948 backticked expansion (i.e. shell command) in
949 RADIUS <-> LDAP mappings.
950 * rlm_ldap now supports older style generic attributes.
951 * dynamic expansions (e.g. "%{expr:1 + 2}" are now parsed
952 when the server starts. Syntax errors in the strings
953 are caught, and a descriptive error is printed.
954 * Static regular expressions (e.g. /a*b/) are now parsed
955 when the server starts. Syntax errors in the strings
956 are caught, and a descriptive error is printed.
957 * dynamic expansions are cached after being parsed. They are
958 no longer re-parsed at run-time for every request.
959 * regular expressions are now parsed and cached when the server
961 * Added the %{rest:} expansion to rlm_rest, which will send
962 a GET request to the URL passed as the format string.
963 Any body text will be written to the expansion buffer.
964 * rlm_rest now available as a debian package.
965 * When an 'if' condition statically evaluates to true/false,
966 unlang does more static optimization. For examples, see
967 src/tests/keywords/if-skip
968 * All modules are marked as safe for '-C', which lets the
969 dynamic expansion checks work in more situations.
970 * Added 'none' and 'custom' rlm_rest body types. 'custom'
971 allows sending of arbitrary expanded text and content-type
973 * Added "config" section to Perl. See mods-available/perl
974 * Added '%v' which expands to the server version - Patch
976 * more mis-matched casts are caught in "if" conditions,
977 and descriptive errors are printed.
978 * Support basic response validation in radclient. This allows
979 administrators to write local test cases for their
980 site-specific configurations.
981 * Removed radconf2xml and radmin "show client config" and
982 "show home_server config".
983 * Forbid running with vulnerable versions of OpenSSL.
984 See "allow_vulnerable_openssl" in the "security"
985 subsection of "radiusd.conf"
986 * Catch underlying "heartbleed" problem, so that nothing bad
987 happens even when using a vulnerable version of OpenSSL.
988 * Add locking API for sql_null, linelog, and detail modules,
989 which should improve performance and work around issues
990 on platforms with bad file locking.
991 * Allow DHCP NAKs to be delayed, via setting
992 reply:FreeRADIUS-Response-Delay = 1
993 * Allow tag and array references anywhere attributes
994 are allowed in "unlang".
995 * many enhancements to radsniff, including output
996 to collectd, ipv6 support and packet loss statistics.
997 * Many dictionary updates (ZTE, Brocade, Motorola).
998 * rlm_yubikey now automatically splits passwords from OTP
1000 * The detail file reader is now threaded by default.
1001 This should improve performance reading the files.
1004 * Fix xlat expression %{attribute[n]} so that it actually
1005 returns the n'th attribute instead of the first one.
1006 * Don't parse string on RHS of update {} when using unary
1007 operators (!*). The RHS should always be ignored.
1008 * Check for more optional functions in json-c so we can
1009 Build with libjson0, which is the name of the json-c package
1011 * Fix issue in radmin where the main dictionaries would
1012 not be loaded which, depending on the configuration, may
1013 have caused validation errors.
1014 * Fix handling of "%{reply:3GPP-*}"
1015 * Fix rlm_perl garbage attributes
1016 * Fix oracle SQL queries, which amongst other things still
1017 used the old expansion format, which is no longer
1019 * Truncate long format strings and error markers instead of
1021 * Fix multiple attribute parsing in rlm_rest JSON.
1022 * Don't crash in rlm_rest if connect_uri is commented out
1023 in the configuration.
1024 * Don't double-escape strings to / from Perl. You may need
1025 to double-check your Perl scripts if they use "\" characters.
1026 See mods-available/perl for documentation.
1027 * Don't re-run "authorize" if a home server fails to respond.
1028 * Don't append "0x" to hex output of octets types, for xlat
1029 expansions. This is the same as v2, and makes it easier
1030 to concatenate multiple attributes of type "octets"
1031 * FreeBSD fixes for execinfo linking.
1032 * Make some of the module configurations more consistent.
1033 * Fix corner cases where STDOUT wouldn't be closed in
1035 * Re-enable "update coa" and originating CoA requests.
1036 * Prevent multiple threads writing to the sql query logs.
1037 * Fix zombie period calculation. Closes #579
1038 * Properly parent VPs for talloc, when moving them in map2request.
1039 * Various fixes for talloc parent / child relationships
1040 * Allow rlm_counter to support VSAs.
1041 * Normalize return codes for many modules. "do nothing" is noop,
1043 * Run Post-Proxy-Type Fail. Closes #576
1044 * Fix DHCP destination port for replies to relays. Closes #591
1045 * Do-Not-Respond policy works again Closes #593
1046 * Proxy-To-Virtual-Server works again. Closes #596
1047 * Build fixes for ancient systems. Closes #607, #608, #609.
1048 * %{Module-Return-Code} works again. Closes #610.
1049 * Don't increment statistics for Status-Server responses.
1051 * A duplicate request isn't a duplicate if the original one
1052 is marked "done". This should lower retransmissions from
1054 * Fix multiple regular expression and glob memory leaks.
1055 * Don't allocate any memory in fr_fault() as it can cause malloc
1057 * Temporarily set dumpable flag before calling system in fr_fault()
1058 else the debugger may not be able to attach.
1059 * Set nonblock on all TCP client sockets.
1060 * Fix minor buffer overrun in mschapv2 where some attribute strings
1061 were not correctly \0 terminated.
1062 * Fix crash on authentication failure with MIT kerberos.
1063 * Fix code so that octal escape sequences aren't prematurely unescaped
1064 in rlm_sql, radclient, preprocess, and other places. This may
1065 require configuration changes, as these sequences will no longer
1066 need double escaping (\\) of the backslash.
1067 * The connection pools no longer have one connection used twice
1068 in certain rare conditions.
1069 * Use self pipes for internal signals. The code was there, but was
1071 * Don't crash if there are outstanding EAP sessions and were told to
1073 * Fix typo in dictionary.rfc4072
1075 FreeRADIUS 3.0.2 Fri 21 Mar 2014 08:30:00 EDT urgency=medium
1076 Feature improvements
1077 * secret keys and LDAP / SQL passwords are now printed as
1078 '<<< secret >>>' in debugging mode. Use -Xx to see the
1080 * Print out more information about passwords in -Xx,
1081 including hashes, comparisons, etc.
1082 * Allow cast (and implicit conversion) of integers to IPv4 addresses
1083 * More xlats allow attribute references. This means they can
1084 operate on binary data. e.g. expr, base64, md5, sha1.
1086 * The dictionaries are now auto-loaded. raddb/dictionary
1087 should no longer have $INCLUDE ${prefix}/share/dictionary
1088 * A "panic_action" can be set to have the server dump a gdb
1089 log on SEGV or other fatal error. See radiusd.conf
1090 * Add support for SHA-224, SHA-256, SHA-384, SHA-512 to rlm_pap.
1091 * Add "%{sha256:}" and "%{sha512:}" xlat functions.
1092 * Cache CUI in EAP session resumption.
1093 * templates can now have sub-sections, which will be included
1094 in the section referencing the template.
1095 * Update more dictionaries.
1096 * Added more instances of the "always" module, for all return
1098 * Suppress broken NASes when proxying. Retransmits which occur
1099 more than once per second are rate-limited to once per second.
1100 * Allow '&' in more xlat expansions.
1101 * Update PostgreSQL schema and queries to record last updated
1102 time, and accounting interim.
1103 * Optimize more "if" conditions when the server loads. This will
1104 avoid work at run time. e.g. ("foo" == "bar") --> FALSE.
1105 * Allow removal of all attributes within a list with !* operator.
1106 * Allow list to list copies with request qualifiers (outer.).
1107 * Add support for ipv4 prefixes and ipv6 addresses and prefixes to
1109 * allow radmin command "set module status <module> <code>"
1110 which can be used to forcibly enable/disable modules.
1111 * pap module now assumes Cleartext-Password if Password-With-Header
1112 doesn't have a {...} header.
1113 * Added "unpack" module. It can unpack binary data from horrible
1114 VSA formats. See raddb/mods-available/unpack
1115 * Added example IP Pool for DHCP, using sqlite. From Matthew Newton
1116 See raddb/mods-config/sql/ippool-dhcp/
1120 * Fix operation of fr_strerror() with RE*() macros.
1121 * Don't assert if the connection we're trying to reconnect
1123 * Fix %{mschap:User-Name} xlat.
1124 * Allow comparisons of signed integers and of ethernet addresses.
1125 * Fix parsing of text-based ascend binary filters.
1126 * Fix a few minor Coverity and clang analyzer issues.
1127 * Log WARNING and ERROR prefixes only once, not twice.
1128 * Fix attribute truncation seen in Perl and other places.
1129 * Use correct port when DHCP relaying.
1130 * Fix behaviour on FreeBSD where sending packets from an interface
1131 bound to an IP address would fail when the server was built with
1133 * Don't abort() when freeing home servers on exit.
1134 * Fix edge case in pairmove() when some attributes could be over-
1136 * Do checks for individual sqlite v2 functions so rlm_sqlite builds
1137 correctly with more versions of the library.
1138 * In heimdal kerberos, create MEMORY ccaches on a per context basis.
1139 This prevents issues with the root ccache being used.
1140 * Fix corner case with proxying, where home server goes down.
1141 * Rate-limit "max_requests" complaint. We don't want to fill the
1142 logs when something goes wrong.
1143 * Use /dev/urandom for raddb/certs/random, if it exists.
1144 * Issue WARNING that old-style clients should no longer be used.
1145 * Auto-set secret to "radsec" for tcp+tls home servers.
1146 * Fix double free in home_server_add when there is a parse error
1148 * rlm_unix checks if the dictionaries are broken, instead of crashing
1149 * Fix potential memory corruption when normalising salted password
1150 hashes from hex, where the combined hash and salt was > 64 bytes.
1151 * Register sqlcounter attributes correctly, and other issues with it
1152 * treat 127.0.0.1/32 as being identical to 127.0.0.1
1153 * Don't mangle error output of SQL drivers like PostgreSQL
1154 * Fix usage of "tls = ${tls}". It could previously cause problems
1155 when the reference was used multiple times.
1156 * Fix TLS session leak for incoming sockets.
1157 * Try harder to clean up memory on exit when using "-mM"
1158 * Fix memory leak when home server is down for RadSec connections
1159 * rate-limit outgoing connection attempts when the home server
1160 is down. It will retry no more than once per second.
1161 * When parsing ipv6 address prefixes, always mask off the host
1163 * Fix rlm_counter so that it does not create two reply
1165 * Fix issues with DHCP Sub-TLVs where the value of the first
1166 Sub-TLV would appear corrupted, and subsequent TLVs would
1167 not appear in debug output.
1168 * Initialize scope in IP address parsing
1169 * Prevent vendor attributes and RFC space attributes from clashing
1171 * Set source IP address for DHCP packets from DHCP-Server-IP-Address,
1172 or DHCP-DHCP-Server-Identifier, if we're unable to otherwise
1173 determine the source IP.
1174 * Fix POST attribute parsing in rlm_rest.
1175 * Fix JSON attribute parsing in rlm_rest.
1176 * Don't append trailing & to POST options in rlm_rest (minor).
1177 * Process HTTP 100 Continue messages correctly in rlm_rest
1178 * Fix generation of long > 512 byte POST payloads, where attribute
1179 values on the chunk boundary may have been omitted in rlm_rest.
1180 * Remove duplicate escape sequence parsing in rlm_sqlippool and
1181 rlm_sqlcounter which caused issues with escaping %. Escape
1182 sequence parsing is now handled purely by the xlat functions.
1183 * Ensure %% is treated as a string literal, and so not passed to any
1184 xlat escape functions for processing.
1185 * Correct calculation of Message-Authenticator
1186 for CoA packets. Closes #556
1188 FreeRADIUS 3.0.1 Mon 13 Jan 2014 14:30:00 EDT urgency=medium
1189 Feature improvements
1190 * Add "timeout" to exec, and "ntlm_auth_timeout" to mschap.
1191 So that run-away child processes are caught earlier.
1192 * Allow TLS clients to use "proto = tls", in which case
1193 TLS is required. The shared secret is then set to "radsec".
1194 * More documentation in the tls virtual server.
1195 * Add "date" module for date formatting.
1196 See raddb/mods-available/date.
1197 * Added unit test suite for internal server functionality
1198 * When loading "update" sections, check if the RHS is a literal
1199 value. If so, syntax check it immediately.
1200 * Update LDAP module documentation and functionality.
1201 The generic attribute can now update lists.
1202 * Updated dictionary.extreme.
1203 * Update sqlippool to do clears as a separate transaction,
1204 and at most once per second. This should help MySQL.
1205 * Respect control:Response-Packet-Type for all types of
1207 * Add support for SSL encryption to the MySQL driver.
1208 * Allow arbitrary connection parameters to be used with the
1210 * Changes to the OpenLDAP schema to fully expose functionality
1211 of the new LDAP module.
1212 * Update debian packaging to include a freeradius-config
1213 package. This package may be provided as a site local
1214 package to avoid fighting with the preinstalled config
1218 * Use correct field for ARP setting in DHCP.
1219 * Fix crash on debug condition (#454).
1220 * Fix a number of minor issues caught by the clang
1222 * Set WARNING messages to yellow instead of normal text.
1223 * Correct debug colorise logic. Patch from Phil Mayers.
1224 * Encode attributes of type "ethernet". No one uses them,
1226 * Work around regex initialization issues.
1227 * Fix build when linking against OpenSSL.
1228 * Print IDs as positive numbers, which helps for large DHCP
1230 * Fix issue with sql_ippool.
1231 * sqlcounter now uses 64-bit counters, to deal with 4G overflow.
1232 * Fix issues with DHCP subsystem.
1233 * Don't build / install disabled modules, or their config
1235 * Fix build for OSX Mavericks, which hid the header files
1237 * Fix LEAP buffer issue. You should still avoid LEAP.
1238 * Mark "unknown" WiMAX attributes as being WiMAX.
1239 * Fix typo in packet decoder for fragmented extended attrs
1241 * Fix rlm_perl build issues when not using threads.
1242 * Enable %{Response-Packet-Type} again.
1243 * Update configuration file parser to handle "bool"
1245 * Update declarations of global boolean variables to use
1246 "bool" consistently. This fixes an issue where some
1247 modules were instantiated in "config check" mode and
1248 did not work correctly.
1249 * Make more messages debug instead of info, to avoid
1250 polluting the logs with messages that can't be fixed.
1251 * Set operator in internal unlang code to suppress spurious
1253 * Fix debian packaging.
1254 * Added "status" to Debian init script.
1255 * Fix "update outer.request" to update the outer request.
1256 * Don't print TLS debugging messages when not in debug mode.
1257 * Correctly manage counters for "limit" sections of TCP / TLS
1259 * Fix libldap debug output.
1260 * Fix rlm_ldap tls functionality.
1261 * Initialise OpenSSL globals early to avoid issues with the
1263 * Fix typo in sqlcounter expansion code. Fixes #463
1264 * Overwrite previous instances of SQL-User-Name when adding
1266 * Work around bugs in both MIT and heimdal versions of
1267 krb5_copy_context(), which caused segfaults in
1269 * Provide meaningful error messages if Heimdal krb5 is used.
1270 * Fix attribute supression in rlm_detail.
1271 * Exit with error code if child fails to complete server
1272 initialisation after forking. This allows init scripts to
1273 correctly report whether the server started ok.
1275 FreeRADIUS 3.0.0 Mon 7 Oct 2013 15:48:14 EDT urgency=medium
1276 Feature improvements
1277 * Documentation for upgrading from 2.x is in raddb/README.rst
1278 Please follow it. It will make the upgrade easier.
1279 * Moved configuration entries in radiusd.conf to make more sense.
1280 * Added the "integer64" and "ipv4prefix" data types.
1281 * Added RADIUS over TLS (i.e. RadSec). See raddb/sites-available/tls
1282 * Updated internal API to support new attributes and formats
1283 * Added code to send SNMP Traps. See raddb/trigger.conf.
1284 * Added preliminary support for Apple's Grand Central Dispatch
1285 * Added provisions for raddb/dictionary.local, for local changes.
1286 See raddb/dictionary for more details.
1287 * Added packet/s tracking. See max_pps in the "listen" section.
1288 * The %{} expansions and "unlang" conditions are now parsed at server
1289 start. Descriptive errors are produced for syntax and format errors.
1290 * Casting is now supported for "unlang" comparisons. See "man unlang"
1291 e.g. <ipaddr>127.0.0.1 == Framed-IP-Address.
1292 * Direct comparison of attribute references is now supported.
1293 e.g. &Foo == &Bar. This avoids stringification of the attributes.
1294 * Direct assignment of attributes is now supported.
1295 e.g. Foo := &Bar. It also works for "octets" data types.
1296 * Comparisons of IPv4 and IPv6 prefixes are now supported.
1297 The "<" operator means "within the prefix" for comparisons.
1298 * New sha1 xlat expansion (thanks to Alan Buxey)
1299 * Colourised log messages when logging to stdout. Look for yellow
1300 warnings and red errors. Doing this will save you a LOT of grief.
1301 * If the PCRE library is available, use it (insted of the POSIX
1302 functions) to process regular expressions (thanks to Phil Mayers).
1303 * -xv now displays all the features the server was built with, and
1304 the versions of the core libraries (libtalloc, libssl).
1307 * Moved raddb/modules/ to raddb/mods-available/, and raddb/mods-enabled/,
1308 following the examples of other projects.
1309 * Additional files for each module are now in raddb/mods-config/.
1310 See raddb/mods-config/README.rst for documentation.
1311 * Moved "users" to raddb/mods-config/files/authorize
1312 * Moved "hints" and "huntgroups" to raddb/mods-config/preprocess/
1313 * Moved eap.conf to mods-available/eap
1314 * Moved sql.conf to mods-available/sql
1315 * Moved TLS configuration for EAP into a common subsection.
1316 See raddb/mods-available/eap, "tls-config" section.
1317 * Added for MS-CHAP Change Password from Phil Mayers.
1318 See raddb/mods-available/mschap, "passchange" subsection.
1319 * Added EAP-PWD implementation from Dan Harkins
1320 * Added connection pools for modules. This unifies connection
1321 management which was previously different for different modules.
1322 * SQL now uses the connection pool. See mods-available/sql
1323 * SQL now supports arbitrary Acct-Status-Types.
1324 These changes are not compatible with 2.x.
1325 * SQL now has full support for SQLite. See raddb/sql/main/sqlite/
1326 * SQLite supports auto-creation of new databases on server startup for
1327 bootstrapping purposes.
1328 * LDAP now uses the connection pool. The LDAP module has been
1329 completely re-written for performance and simplicity.
1330 * LDAP now caches groups. This makes multiple group checks MUCH
1332 * Removed all limitations on 253 octet attributes. RFC 6929 allows
1333 for attributes up to 4K in length.
1334 * New rlm_idn module providing an expansion for performing IDNA encoding
1335 of internationalized domain names. Thanks to 'skids'.
1336 * New rlm_yubikey module to validate yubikey OTP tokens.
1337 See raddb/modules/yubikey
1340 * All known bug fixes from 2.2.x are included.
1341 * Removed "addport" functionality.
1342 * Removed many unused or duplicate modules. See raddb/README.rst.
1344 Internal / API changes:
1345 * All traces of the old build system have been removed.
1346 The new build system is faster and simpler.
1347 * clang is fully supported.
1348 * We now use "talloc" for memory management. A number of new
1349 features required this change. Thanks to the Samba people!
1350 * Many internal APIs have been updated to use talloc.
1351 * New API for iterating over VALUE_PAIRs. This is in preparation
1352 for attributes, in version 3.1.
1353 * No new code should directly modify any field of a VALUE_PAIR.
1354 * VALUE_PAIRs contain pointers to DICT_ATTR instead of containing
1355 attribute and vendor fields. This will allow nested attributes.
1356 * Some protocol specific code has been moved out into proto_* modules.
1357 More will come in subsequent versions. See proto_dhcp and proto_vmps.
1358 * Standardised internal logging macros. radlog() should not be used.
1359 See src/include/log.h
1360 * Use OpenSSL hashing functions when available.
1361 * The server now builds with no warnings on most platforms.
1362 * New RADIUS encoder/decoder, to support new formats.
1363 * Added RFC 6929 "extended attributes", via the new encoder/decoder.
1364 * Added full WiMAX support, via the new encoder/decoder. The old
1365 code could not handle some unusual corner cases.