1 Summary: High-performance and highly configurable free RADIUS server
5 License: GPLv2+ and LGPLv2+
6 Group: System Environment/Daemons
7 URL: http://www.freeradius.org/
9 # Is elliptic curve cryptography supported?
10 %if 0%{?rhel} >= 7 || 0%{?fedora} >= 20
11 %global HAVE_EC_CRYPTO 1
13 %global HAVE_EC_CRYPTO 0
16 %global dist_base freeradius-server
18 #Source0: ftp://ftp.freeradius.org/pub/radius/%{dist_base}.tar.bz2
19 Source0: %{dist_base}.tar.gz
20 Source100: freeradius-radiusd-init
21 Source102: freeradius-logrotate
22 Source103: freeradius-pam-conf
23 Source104: freeradius-tmpfiles.conf
25 Patch1: freeradius-redhat-config.patch
27 %global docdir %{?_pkgdocdir}%{!?_pkgdocdir:%{_docdir}/%{name}-%{version}}
28 %define initddir %{?_initddir:%{_initddir}}%{!?_initddir:%{_initrddir}}
30 BuildRequires: autoconf
31 BuildRequires: gdbm-devel
32 BuildRequires: chrpath
33 BuildRequires: openssl
34 BuildRequires: openssl-devel
35 BuildRequires: pam-devel
36 BuildRequires: zlib-devel
37 BuildRequires: net-snmp-devel
38 BuildRequires: net-snmp-utils
39 BuildRequires: readline-devel
40 BuildRequires: libpcap-devel
41 BuildRequires: libtalloc-devel
42 BuildRequires: pcre-devel
45 BuildRequires: libyubikey-devel
46 BuildRequires: tncfhh-devel
47 BuildRequires: ykclient-devel
50 # Moonshot Dependencies
51 BuildRequires: trust_router-devel
52 Requires: trust_router-libs
54 Requires: openssl >= 1.0.1e-16.el6_5.7
55 Requires(pre): shadow-utils glibc-common
56 Requires(post): /sbin/chkconfig
57 Requires(preun): /sbin/chkconfig
60 The FreeRADIUS Server Project is a high performance and highly configurable
61 GPL'd free RADIUS server. The server is similar in some respects to
62 Livingston's 2.0 server. While FreeRADIUS started as a variant of the
63 Cistron RADIUS server, they don't share a lot in common any more. It now has
64 many more features than Cistron or Livingston, and is much more configurable.
66 FreeRADIUS is an Internet authentication daemon, which implements the RADIUS
67 protocol, as defined in RFC 2865 (and others). It allows Network Access
68 Servers (NAS boxes) to perform authentication for dial-up users. There are
69 also RADIUS clients available for Web servers, firewalls, Unix logins, and
70 more. Using RADIUS allows authentication and authorization for a network to
71 be centralized, and minimizes the amount of re-configuration which has to be
72 done when adding or deleting new users.
75 Group: System Environment/Daemons
76 Summary: FreeRADIUS ABFAb Configuration
77 Requires: %{name} = %{version}-%{release}
78 Requires: freeradius-sqlite
81 This package provides configuration required by an ABFAB (RFC 7055)
82 identity provider or RP proxy.
86 Summary: FreeRADIUS documentation
89 All documentation supplied by the FreeRADIUS project is included
93 Group: System Environment/Daemons
94 Summary: FreeRADIUS utilities
95 Requires: %{name} = %{version}-%{release}
96 Requires: libpcap >= 0.9.4
99 The FreeRADIUS server has a number of features found in other servers,
100 and additional features not found in any other server. Rather than
101 doing a feature by feature comparison, we will simply list the features
102 of the server, and let you decide if they satisfy your needs.
104 Support for RFC and VSA Attributes Additional server configuration
105 attributes Selecting a particular configuration Authentication methods
108 Group: System Environment/Daemons
109 Summary: FreeRADIUS development files
110 Requires: %{name} = %{version}-%{release}
113 Development headers and libraries for FreeRADIUS.
116 Summary: LDAP support for freeradius
117 Group: System Environment/Daemons
118 Requires: %{name} = %{version}-%{release}
119 BuildRequires: openldap-devel
122 This plugin provides the LDAP support for the FreeRADIUS server project.
125 Summary: Kerberos 5 support for freeradius
126 Group: System Environment/Daemons
127 Requires: %{name} = %{version}-%{release}
128 BuildRequires: krb5-devel
131 This plugin provides the Kerberos 5 support for the FreeRADIUS server project.
134 Summary: Perl support for freeradius
135 Group: System Environment/Daemons
136 Requires: %{name} = %{version}-%{release}
137 Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version))
138 %{?fedora:BuildRequires: perl-devel}
139 BuildRequires: perl-devel
140 BuildRequires: perl(ExtUtils::Embed)
143 This plugin provides the Perl support for the FreeRADIUS server project.
146 Summary: Python support for freeradius
147 Group: System Environment/Daemons
148 Requires: %{name} = %{version}-%{release}
149 BuildRequires: python-devel
152 This plugin provides the Python support for the FreeRADIUS server project.
155 Summary: MySQL support for freeradius
156 Group: System Environment/Daemons
157 Requires: %{name} = %{version}-%{release}
158 BuildRequires: mysql-devel
161 This plugin provides the MySQL support for the FreeRADIUS server project.
164 Summary: Postgresql support for freeradius
165 Group: System Environment/Daemons
166 Requires: %{name} = %{version}-%{release}
167 BuildRequires: postgresql-devel
169 %description postgresql
170 This plugin provides the postgresql support for the FreeRADIUS server project.
173 Summary: REST support for freeradius
174 Group: System Environment/Daemons
175 Requires: %{name} = %{version}-%{release}
176 BuildRequires: libcurl-devel
177 BuildRequires: json-c-devel
180 This plugin provides the REST support for the FreeRADIUS server project.
183 Summary: SQLite support for freeradius
184 Group: System Environment/Daemons
185 Requires: %{name} = %{version}-%{release}
186 BuildRequires: sqlite-devel
189 This plugin provides the SQLite support for the FreeRADIUS server project.
192 Summary: Unix ODBC support for freeradius
193 Group: System Environment/Daemons
194 Requires: %{name} = %{version}-%{release}
195 BuildRequires: unixODBC-devel
197 %description unixODBC
198 This plugin provides the unixODBC support for the FreeRADIUS server project.
202 %setup -q -n %{dist_base}
203 # Note: We explicitly do not make patch backup files because 'make install'
204 # mistakenly includes the backup files, especially problematic for raddb config files.
208 # Force compile/link options, extra security for network facing daemon
209 %global _hardened_build 1
212 --libdir=%{_libdir}/freeradius \
215 --with-docdir=%{docdir} \
216 --with-rlm-sql_postgresql-include-dir=/usr/include/pgsql \
217 --with-rlm-sql-postgresql-lib-dir=%{_libdir} \
218 --with-rlm-sql_mysql-include-dir=/usr/include/mysql \
219 --with-mysql-lib-dir=%{_libdir}/mysql \
220 --with-unixodbc-lib-dir=%{_libdir} \
221 --with-rlm-dbm-lib-dir=%{_libdir} \
222 --with-rlm-krb5-include-dir=/usr/kerberos/include \
223 --without-rlm_couchbase \
224 --without-rlm_eap_ikev2 \
225 --without-rlm_example \
227 --without-rlm_smsotp \
228 --without-rlm_sqlhpwippool \
229 --without-rlm_sql_iodbc \
230 --without-rlm_sql_firebird \
231 --without-rlm_sql_db2 \
232 --without-rlm_sql_oracle
237 mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/lib/radiusd
238 make install R=$RPM_BUILD_ROOT
239 for foo in abfab-tr-idp abfab-tls channel_bindings ; do
240 test -e $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/sites-enabled/$foo || ln -s ../sites-available/$foo $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/sites-enabled
242 for foo in abfab_psk_sql ; do
243 test -e $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/mods-enabled/$foo || ln -s ../mods-available/$foo $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/mods-enabled
247 mkdir -p $RPM_BUILD_ROOT/var/log/radius/radacct
248 touch $RPM_BUILD_ROOT/var/log/radius/{radutmp,radius.log}
250 install -D -m 755 %{SOURCE100} $RPM_BUILD_ROOT/%{initddir}/radiusd
251 install -D -m 644 %{SOURCE102} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/radiusd
252 install -D -m 644 %{SOURCE103} $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/radiusd
254 mkdir -p %{buildroot}%{_sysconfdir}/tmpfiles.d
255 mkdir -p %{buildroot}%{_localstatedir}/run/
256 install -d -m 0710 %{buildroot}%{_localstatedir}/run/radiusd/
257 install -d -m 0700 %{buildroot}%{_localstatedir}/run/radiusd/tmp
258 install -m 0644 %{SOURCE104} %{buildroot}%{_sysconfdir}/tmpfiles.d/radiusd.conf
260 # remove unneeded stuff
261 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.crt
262 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.csr
263 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.der
264 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.key
265 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.pem
266 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.p12
267 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/index.*
268 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/serial*
269 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/dh
270 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/random
273 rm -f $RPM_BUILD_ROOT/%{_mandir}/man1/radeapclient.1
275 rm -f $RPM_BUILD_ROOT/usr/sbin/rc.radiusd
276 rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.a
277 rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.la
279 chrpath --delete $RPM_BUILD_ROOT/%{_libdir}/freeradius/rlm_sql_unixodbc.so
280 chrpath --delete $RPM_BUILD_ROOT/%{_libdir}/freeradius/rlm_sql_postgresql.so
282 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-available/couchbase
284 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/main/mssql
285 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-available/eap.orig
287 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/ippool/oracle
288 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/ippool-dhcp/oracle
289 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/main/oracle
292 # remove unsupported config files
293 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/experimental.conf
294 # install doc files omitted by standard install
295 for f in COPYRIGHT CREDITS INSTALL.rst README.rst VERSION; do
296 cp $f $RPM_BUILD_ROOT/%{docdir}
298 cp LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.gpl
299 cp src/lib/LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.lgpl
300 cp src/LICENSE.openssl $RPM_BUILD_ROOT/%{docdir}/LICENSE.openssl
302 # add Red Hat specific documentation
303 cat >> $RPM_BUILD_ROOT/%{docdir}/REDHAT << EOF
305 Red Hat, RHEL, Fedora, and CentOS specific information can be found on the
306 FreeRADIUS Wiki in the Red Hat FAQ.
308 http://wiki.freeradius.org/guide/Red-Hat-FAQ
310 Please reference that document.
312 All documentation is in the freeradius-doc sub-package.
317 # Make sure our user/group is present prior to any package or subpackage installation
319 getent group radiusd >/dev/null || /usr/sbin/groupadd -r -g 95 radiusd > /dev/null 2>&1
320 getent passwd radiusd >/dev/null || /usr/sbin/useradd -r -g radiusd -u 95 -c "radiusd user" -d %{_localstatedir}/lib/radiusd -s /sbin/nologin radiusd > /dev/null 2>&1
324 if [ $1 -eq 1 ]; then # install
325 /sbin/chkconfig --add radiusd
326 if [ ! -e /etc/raddb/certs/server.pem ]; then
327 /sbin/runuser -g radiusd -c 'umask 007; /etc/raddb/certs/bootstrap' > /dev/null 2>&1
333 if [ $1 -eq 0 ]; then # uninstall
334 /sbin/service radiusd stop > /dev/null 2>&1
335 /sbin/chkconfig --del radiusd
341 if [ $1 -ge 1 ]; then # upgrade
342 /sbin/service radiusd condrestart >/dev/null 2>&1
344 if [ $1 -eq 0 ]; then # uninstall
345 getent passwd radiusd >/dev/null && /usr/sbin/userdel radiusd > /dev/null 2>&1
346 getent group radiusd >/dev/null && /usr/sbin/groupdel radiusd > /dev/null 2>&1
351 %defattr(-,root,root)
354 %doc %{docdir}/LICENSE.gpl
355 %doc %{docdir}/LICENSE.lgpl
356 %doc %{docdir}/LICENSE.openssl
357 %doc %{docdir}/REDHAT
360 %config(noreplace) %{_sysconfdir}/pam.d/radiusd
361 %config(noreplace) %{_sysconfdir}/logrotate.d/radiusd
363 %config %{_sysconfdir}/tmpfiles.d/radiusd.conf
364 %dir %attr(710,radiusd,radiusd) %{_localstatedir}/run/radiusd
365 %dir %attr(700,radiusd,radiusd) %{_localstatedir}/run/radiusd/tmp
366 %dir %attr(755,radiusd,radiusd) %{_localstatedir}/lib/radiusd
369 %dir %attr(755,root,radiusd) /etc/raddb
370 %defattr(-,root,radiusd)
371 /etc/raddb/README.rst
372 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/panic.gdb
374 %attr(644,root,radiusd) %config(noreplace) /etc/raddb/dictionary
375 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/clients.conf
377 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/templates.conf
378 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/trigger.conf
380 # symlink: /etc/raddb/hints -> ./mods-config/preprocess/hints
381 %config /etc/raddb/hints
383 # symlink: /etc/raddb/huntgroups -> ./mods-config/preprocess/huntgroups
384 %config /etc/raddb/huntgroups
386 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/proxy.conf
387 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/radiusd.conf
389 # symlink: /etc/raddb/users -> ./mods-config/files/authorize
390 %config(noreplace) /etc/raddb/users
393 %dir %attr(770,root,radiusd) /etc/raddb/certs
394 %config(noreplace) /etc/raddb/certs/Makefile
395 /etc/raddb/certs/README
396 %config(noreplace) /etc/raddb/certs/xpextensions
397 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/certs/*.cnf
398 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/certs/passwords.mk
399 %attr(750,root,radiusd) /etc/raddb/certs/bootstrap
402 %dir %attr(750,root,radiusd) /etc/raddb/mods-config
403 /etc/raddb/mods-config/README.rst
404 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/attr_filter
405 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/attr_filter/*
406 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/files
407 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/files/*
408 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/preprocess
409 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/preprocess/*
411 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql
412 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter
413 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui
414 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool
415 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool-dhcp
416 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main
418 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/unbound
419 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/unbound/default.conf
422 %dir %attr(750,root,radiusd) /etc/raddb/sites-available
423 /etc/raddb/sites-available/README
424 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/abfab-tr-idp
425 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/abfab-tls
426 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/control-socket
427 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/challenge
428 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/channel_bindings
429 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/decoupled-accounting
430 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/robust-proxy-accounting
431 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/soh
432 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/coa
433 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/example
434 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/inner-tunnel
435 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/dhcp
436 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/check-eap-tls
437 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/status
438 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/dhcp.relay
439 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/virtual.example.com
440 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/originate-coa
441 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/vmps
442 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/default
443 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/proxy-inner-tunnel
444 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/dynamic-clients
445 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/copy-acct-to-home-server
446 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/buffered-sql
447 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/tls
450 # symlink: /etc/raddb/sites-enabled/xxx -> ../sites-available/xxx
451 %dir %attr(750,root,radiusd) /etc/raddb/sites-enabled
452 %config(missingok) /etc/raddb/sites-enabled/channel_bindings
453 %config(missingok) /etc/raddb/sites-enabled/inner-tunnel
454 %config(missingok) /etc/raddb/sites-enabled/default
457 %dir %attr(750,root,radiusd) /etc/raddb/mods-available
458 /etc/raddb/mods-available/README.rst
459 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/abfab_psk_sql
460 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/always
461 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/attr_filter
462 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/cache
463 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/cache_eap
464 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/chap
465 #%attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/couchbase
466 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/counter
467 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/cui
468 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/date
469 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/detail
470 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/detail.example.com
471 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/detail.log
472 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/dhcp
473 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/dhcp_sqlippool
474 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/digest
475 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/dynamic_clients
476 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/eap
477 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/echo
478 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/etc_group
479 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/exec
480 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/expiration
481 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/expr
482 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/files
483 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/idn
484 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/inner-eap
485 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/ippool
486 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/linelog
487 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/logintime
488 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/mac2ip
489 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/mac2vlan
490 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/mschap
491 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/ntlm_auth
492 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/opendirectory
493 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/otp
494 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/pam
495 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/pap
496 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/passwd
497 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/preprocess
498 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/python
499 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/radutmp
500 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/realm
501 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/redis
502 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/rediswho
503 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/replicate
504 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/smbpasswd
505 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/smsotp
506 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/soh
507 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sometimes
508 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sql
509 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sqlcounter
510 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sqlippool
511 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sradutmp
512 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/unix
513 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/unpack
514 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/unbound
515 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/utf8
516 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/wimax
517 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/yubikey
520 # symlink: /etc/raddb/mods-enabled/xxx -> ../mods-available/xxx
521 %dir %attr(750,root,radiusd) /etc/raddb/mods-enabled
522 %config(missingok) /etc/raddb/mods-enabled/always
523 %config(missingok) /etc/raddb/mods-enabled/attr_filter
524 %config(missingok) /etc/raddb/mods-enabled/cache_eap
525 %config(missingok) /etc/raddb/mods-enabled/chap
526 %config(missingok) /etc/raddb/mods-enabled/detail
527 %config(missingok) /etc/raddb/mods-enabled/detail.log
528 %config(missingok) /etc/raddb/mods-enabled/dhcp
529 %config(missingok) /etc/raddb/mods-enabled/digest
530 %config(missingok) /etc/raddb/mods-enabled/dynamic_clients
531 %config(missingok) /etc/raddb/mods-enabled/eap
532 %config(missingok) /etc/raddb/mods-enabled/echo
533 %config(missingok) /etc/raddb/mods-enabled/exec
534 %config(missingok) /etc/raddb/mods-enabled/expiration
535 %config(missingok) /etc/raddb/mods-enabled/expr
536 %config(missingok) /etc/raddb/mods-enabled/files
537 %config(missingok) /etc/raddb/mods-enabled/linelog
538 %config(missingok) /etc/raddb/mods-enabled/logintime
539 %config(missingok) /etc/raddb/mods-enabled/mschap
540 %config(missingok) /etc/raddb/mods-enabled/ntlm_auth
541 %config(missingok) /etc/raddb/mods-enabled/pap
542 %config(missingok) /etc/raddb/mods-enabled/passwd
543 %config(missingok) /etc/raddb/mods-enabled/preprocess
544 %config(missingok) /etc/raddb/mods-enabled/radutmp
545 %config(missingok) /etc/raddb/mods-enabled/realm
546 %config(missingok) /etc/raddb/mods-enabled/replicate
547 %config(missingok) /etc/raddb/mods-enabled/soh
548 %config(missingok) /etc/raddb/mods-enabled/sradutmp
549 %config(missingok) /etc/raddb/mods-enabled/unix
550 %config(missingok) /etc/raddb/mods-enabled/unpack
551 %config(missingok) /etc/raddb/mods-enabled/utf8
554 %dir %attr(750,root,radiusd) /etc/raddb/policy.d
555 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/abfab-tr
556 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/accounting
557 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/canonicalization
558 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/control
559 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/cui
560 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/debug
561 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/dhcp
562 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/eap
563 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/filter
564 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/operator-name
568 %defattr(-,root,root)
575 %dir %attr(755,root,root) /usr/share/freeradius
576 /usr/share/freeradius/*
579 %dir %attr(700,radiusd,radiusd) /var/log/radius/
580 %dir %attr(700,radiusd,radiusd) /var/log/radius/radacct/
581 %ghost %attr(644,radiusd,radiusd) /var/log/radius/radutmp
582 %ghost %attr(600,radiusd,radiusd) /var/log/radius/radius.log
585 %attr(755,root,root) %{_libdir}/freeradius/lib*.so*
588 %dir %attr(755,root,root) %{_libdir}/freeradius
589 %{_libdir}/freeradius/proto_dhcp.so
590 %{_libdir}/freeradius/proto_vmps.so
591 %{_libdir}/freeradius/rlm_always.so
592 %{_libdir}/freeradius/rlm_attr_filter.so
593 %{_libdir}/freeradius/rlm_cache.so
594 %{_libdir}/freeradius/rlm_cache_rbtree.so
595 %{_libdir}/freeradius/rlm_chap.so
596 %{_libdir}/freeradius/rlm_counter.so
597 %{_libdir}/freeradius/rlm_cram.so
598 %{_libdir}/freeradius/rlm_date.so
599 %{_libdir}/freeradius/rlm_detail.so
600 %{_libdir}/freeradius/rlm_dhcp.so
601 %{_libdir}/freeradius/rlm_digest.so
602 %{_libdir}/freeradius/rlm_dynamic_clients.so
603 %{_libdir}/freeradius/rlm_eap.so
604 %{_libdir}/freeradius/rlm_eap_gtc.so
605 %{_libdir}/freeradius/rlm_eap_leap.so
606 %{_libdir}/freeradius/rlm_eap_md5.so
607 %{_libdir}/freeradius/rlm_eap_mschapv2.so
608 %{_libdir}/freeradius/rlm_eap_peap.so
609 %{_libdir}/freeradius/rlm_eap_pwd.so
610 %{_libdir}/freeradius/rlm_eap_sim.so
611 %{_libdir}/freeradius/rlm_eap_tls.so
613 %{_libdir}/freeradius/rlm_eap_tnc.so
615 %{_libdir}/freeradius/rlm_eap_ttls.so
616 %{_libdir}/freeradius/rlm_exec.so
617 %{_libdir}/freeradius/rlm_expiration.so
618 %{_libdir}/freeradius/rlm_expr.so
619 %{_libdir}/freeradius/rlm_files.so
620 %{_libdir}/freeradius/rlm_ippool.so
621 %{_libdir}/freeradius/rlm_linelog.so
622 %{_libdir}/freeradius/rlm_logintime.so
623 %{_libdir}/freeradius/rlm_mschap.so
624 %{_libdir}/freeradius/rlm_otp.so
625 %{_libdir}/freeradius/rlm_pam.so
626 %{_libdir}/freeradius/rlm_pap.so
627 %{_libdir}/freeradius/rlm_passwd.so
628 %{_libdir}/freeradius/rlm_preprocess.so
629 %{_libdir}/freeradius/rlm_radutmp.so
630 %{_libdir}/freeradius/rlm_realm.so
631 %{_libdir}/freeradius/rlm_replicate.so
632 %{_libdir}/freeradius/rlm_soh.so
633 %{_libdir}/freeradius/rlm_sometimes.so
634 %{_libdir}/freeradius/rlm_sql.so
635 %{_libdir}/freeradius/rlm_sqlcounter.so
636 %{_libdir}/freeradius/rlm_sqlippool.so
637 %{_libdir}/freeradius/rlm_sqlhpwippool.so
638 %{_libdir}/freeradius/rlm_sql_null.so
639 %{_libdir}/freeradius/rlm_test.so
640 %{_libdir}/freeradius/rlm_unix.so
641 %{_libdir}/freeradius/rlm_unpack.so
642 %{_libdir}/freeradius/rlm_utf8.so
643 %{_libdir}/freeradius/rlm_wimax.so
644 %{_libdir}/freeradius/rlm_yubikey.so
647 %doc %{_mandir}/man5/clients.conf.5.gz
648 %doc %{_mandir}/man5/dictionary.5.gz
649 %doc %{_mandir}/man5/radiusd.conf.5.gz
650 %doc %{_mandir}/man5/radrelay.conf.5.gz
651 %doc %{_mandir}/man5/rlm_always.5.gz
652 %doc %{_mandir}/man5/rlm_attr_filter.5.gz
653 %doc %{_mandir}/man5/rlm_chap.5.gz
654 %doc %{_mandir}/man5/rlm_counter.5.gz
655 %doc %{_mandir}/man5/rlm_detail.5.gz
656 %doc %{_mandir}/man5/rlm_digest.5.gz
657 %doc %{_mandir}/man5/rlm_expr.5.gz
658 %doc %{_mandir}/man5/rlm_files.5.gz
659 %doc %{_mandir}/man5/rlm_idn.5.gz
660 %doc %{_mandir}/man5/rlm_mschap.5.gz
661 %doc %{_mandir}/man5/rlm_pap.5.gz
662 %doc %{_mandir}/man5/rlm_passwd.5.gz
663 %doc %{_mandir}/man5/rlm_realm.5.gz
664 %doc %{_mandir}/man5/rlm_sql.5.gz
665 %doc %{_mandir}/man5/rlm_unix.5.gz
666 %doc %{_mandir}/man5/unlang.5.gz
667 %doc %{_mandir}/man5/users.5.gz
668 %doc %{_mandir}/man8/raddebug.8.gz
669 %doc %{_mandir}/man8/radiusd.8.gz
670 %doc %{_mandir}/man8/radmin.8.gz
671 %doc %{_mandir}/man8/radrelay.8.gz
674 %dir %attr(750,root,radiusd) /etc/raddb/sites-enabled
675 %config(missingok) /etc/raddb/sites-enabled/abfab-tr-idp
676 %config(missingok) /etc/raddb/sites-enabled/abfab-tls
677 %config(missingok) /etc/raddb/sites-enabled/channel_bindings
678 %dir %attr(750,root,radiusd) /etc/raddb/mods-enabled
679 %config(missingok) /etc/raddb/mods-enabled/abfab_psk_sql
691 %doc %{_mandir}/man1/radclient.1.gz
692 %doc %{_mandir}/man1/radlast.1.gz
693 %doc %{_mandir}/man1/radtest.1.gz
694 %doc %{_mandir}/man1/radwho.1.gz
695 %doc %{_mandir}/man1/radzap.1.gz
696 %doc %{_mandir}/man1/smbencrypt.1.gz
697 %doc %{_mandir}/man5/checkrad.5.gz
698 %doc %{_mandir}/man8/radcrypt.8.gz
699 %doc %{_mandir}/man8/radsniff.8.gz
700 %doc %{_mandir}/man8/radsqlrelay.8.gz
701 %doc %{_mandir}/man8/rlm_ippool_tool.8.gz
704 /usr/include/freeradius
707 %{_libdir}/freeradius/rlm_krb5.so
708 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/krb5
711 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/perl
713 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/perl
714 /etc/raddb/mods-config/perl/example.pl
716 %{_libdir}/freeradius/rlm_perl.so
719 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/python
720 /etc/raddb/mods-config/python/example.py*
721 /etc/raddb/mods-config/python/radiusd.py*
722 %{_libdir}/freeradius/rlm_python.so
725 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter/mysql
726 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/dailycounter.conf
727 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/expire_on_login.conf
728 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/monthlycounter.conf
729 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/noresetcounter.conf
731 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui/mysql
732 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/mysql/queries.conf
733 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/mysql/schema.sql
735 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool/mysql
736 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/mysql/queries.conf
737 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/mysql/schema.sql
739 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool-dhcp/mysql
740 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool-dhcp/mysql/queries.conf
741 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool-dhcp/mysql/schema.sql
742 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/mysql
743 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/setup.sql
744 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/queries.conf
745 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/schema.sql
747 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/mysql/extras
748 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/mysql/extras/wimax
749 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/extras/wimax/queries.conf
750 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/extras/wimax/schema.sql
752 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/ndb
753 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/ndb/setup.sql
754 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/ndb/schema.sql
755 /etc/raddb/mods-config/sql/main/ndb/README
757 %{_libdir}/freeradius/rlm_sql_mysql.so
760 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter/postgresql
761 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/dailycounter.conf
762 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/expire_on_login.conf
763 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/monthlycounter.conf
764 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/noresetcounter.conf
766 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui/postgresql
767 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/postgresql/queries.conf
768 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/postgresql/schema.sql
770 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool/postgresql
771 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/postgresql/queries.conf
772 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/postgresql/schema.sql
774 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/postgresql
775 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/setup.sql
776 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/queries.conf
777 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/schema.sql
779 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/postgresql/extras
780 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/extras/update_radacct_group.sql
781 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/extras/voip-postpaid.conf
782 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/extras/cisco_h323_db_schema.sql
784 %{_libdir}/freeradius/rlm_sql_postgresql.so
787 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter/sqlite
788 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/dailycounter.conf
789 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/expire_on_login.conf
790 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/monthlycounter.conf
791 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/noresetcounter.conf
793 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui/sqlite
794 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/sqlite/queries.conf
795 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/sqlite/schema.sql
797 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool/sqlite
798 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/sqlite/queries.conf
799 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/sqlite/schema.sql
801 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool-dhcp/sqlite
802 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool-dhcp/sqlite/queries.conf
803 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool-dhcp/sqlite/schema.sql
805 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/sqlite
806 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/sqlite/queries.conf
807 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/sqlite/schema.sql
809 %{_libdir}/freeradius/rlm_sql_sqlite.so
812 %{_libdir}/freeradius/rlm_ldap.so
813 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/ldap
816 %{_libdir}/freeradius/rlm_rest.so
817 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/rest
820 %{_libdir}/freeradius/rlm_sql_unixodbc.so
823 * Thu Jul 10 2014 Stefan Paetow <stefan.paetow@ja.net> - 3.0.4-1
824 - Upgrade to upstream 3.0.4 release, configuration compatible with 3.0.1.
825 - Backported to CentOS 6.5
827 * Wed May 14 2014 Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.3-1
828 - Upgrade to upstream 3.0.3 release.
829 See upstream ChangeLog for details (in freeradius-doc subpackage).
830 - Minor configuration parsing change: "Double-escaping of characters in Perl,
831 and octal characters has been fixed. If your configuration has text like
832 "\\000", you will need to remove one backslash."
833 - Additionally includes post-release fixes for:
834 * case-insensitive matching in compiled regular expressions not working,
835 * upstream issue #634 "3.0.3 SIGSEGV on config parse",
836 * upstream issue #635 "3.0.x - rlm_perl - strings are still
837 escaped when passed to perl from FreeRADIUS",
838 * upstream issue #639 "foreach may cause ABORT".
839 - Fixes bugs 1097266 1070447
841 * Wed May 7 2014 Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.2-1
842 - Upgrade to upstream 3.0.2 release, configuration compatible with 3.0.1.
843 See upstream ChangeLog for details (in freeradius-doc subpackage)
844 - Fixes bugs 1058884 1061408 1070447 1079500
846 * Mon Feb 24 2014 Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.1-4
847 - Fix CVE-2014-2015 "freeradius: stack-based buffer overflow flaw in rlm_pap
849 - resolves: bug#1066984 (fedora 1066763)
851 * Fri Feb 21 2014 John Dennis <jdennis@redhat.com> - 3.0.1-3
852 - resolves: bug#1068798 (fedora 1068795)
853 rlm_perl attribute values truncated
855 * Sun Jan 19 2014 John Dennis <jdennis@redhat.com> - 3.0.1-2
856 - resolves: bug#1055073 (fedora 1055072)
857 rlm_ippool; bad config file attribute and fails to send reply attributes
858 - resolves: bug#1055567 (fedora 1056227)
860 - change CFLAGS -imacros to -include to address gcc/gdb bug 1004526
861 where gdb will not display source information, only <command-line>
863 * Tue Jan 14 2014 John Dennis <jdennis@redhat.com> - 3.0.1-1
864 - Upgrade to upstream 3.0.1 release, full config compatible with 3.0.0.
865 This is a roll-up of all upstream bugs fixes found in 3.0.0
866 See upstream ChangeLog for details (in freeradius-doc subpackage)
867 - fixes bugs 1053020 1044747 1048474 1043036
869 * Tue Nov 26 2013 John Dennis <jdennis@redhat.com> - 3.0.0-4
870 - resolves: bug#1031035
871 remove radeapclient man page,
872 upstream no longer supports radeapclient, use eapol_test instead
873 - resolves: bug#1031061
874 rlm_eap_leap memory corruption, see freeradius-rlm_leap.patch
875 - move man pages for utils into utils subpackage from doc subpackage
876 - fix HAVE_EC_CRYPTO test to include f20
877 - add new directory /var/run/radiusd/tmp
878 update mods-available/eap so tls-common.verify.tmpdir to point to it
880 * Wed Nov 13 2013 John Dennis <jdennis@redhat.com> - 3.0.0-3
881 - resolves: bug#1029941
882 PW_TYPE_BOOLEAN config item should be declared int, not bool
884 * Mon Oct 28 2013 John Dennis <jdennis@redhat.com> - 3.0.0-2
885 - resolves: bug#1024119
886 tncfhh-devel is now available in RHEL-7, remove conditional BuildRequires
888 * Sun Oct 13 2013 John Dennis <jdennis@redhat.com> - 3.0.0-1
889 - Offical 3.0 gold release from upstream
890 - resolves: bug#1016873
891 - resolves: bug#891297
893 * Sun Sep 8 2013 John Dennis <jdennis@redhat.com> - 3.0.0-0.4.rc1
894 - upgrade to second 3.0 release candidate rc1
896 * Mon Aug 26 2013 John Dennis <jdennis@redhat.com> - 3.0.0-0.3.rc0
897 - add missingok config attribute to /etc/raddb/sites-enabled/* symlinks
899 * Sat Aug 03 2013 Petr Pisar <ppisar@redhat.com> - 3.0.0-0.2.rc0
902 * Fri Jul 26 2013 Ville Skyttä <ville.skytta@iki.fi> - 3.0.0-0.1.rc0
903 - Install docs to %%{_pkgdocdir} where available.
905 * Mon Jul 22 2013 John Dennis <jdennis@redhat.com> - 3.0.0-0.rc0
906 - Upgrade to new upstream major version release
908 * Wed Jul 17 2013 Petr Pisar <ppisar@redhat.com> - 2.2.0-7
911 * Wed Feb 13 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.2.0-6
912 - Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
914 * Fri Dec 14 2012 John Dennis <jdennis@redhat.com> - 2.2.0-5
915 - resolves: bug#850119 - Introduce new systemd-rpm macros (>= F18)
917 * Thu Dec 13 2012 John Dennis <jdennis@redhat.com> - 2.2.0-4
918 - add compile option -fno-strict-aliasing
920 * Thu Dec 13 2012 John Dennis <jdennis@redhat.com> - 2.2.0-3
921 - specify homedir (/var/lib/radiusd) for radiusd user in useradd,
922 do not permit useradd to default the homedir.
924 * Wed Dec 12 2012 John Dennis <jdennis@redhat.com> - 2.2.0-2
925 - add security options to compiler/linker
927 * Mon Dec 10 2012 John Dennis <jdennis@redhat.com> - 2.2.0-1
928 - resolves: bug#876564 - fails to start without freeradius-mysql
929 - use upstream version of freeradius-exclude-config-file.patch
931 * Wed Oct 3 2012 John Dennis <jdennis@redhat.com> - 2.2.0-0
932 - Add new patch to avoid reading .rpmnew, .rpmsave and other invalid
933 files when loading config files
934 - Upgrade to new 2.2.0 upstream release
935 - Upstream changelog for 2.1.12:
937 * 100% configuration file compatible with 2.1.x.
938 The only fix needed is to disallow "hashsize=0" for rlm_passwd
939 * Update Aruba, Alcatel Lucent, APC, BT, PaloAlto, Pureware,
940 Redback, and Mikrotik dictionaries
941 * Switch to using SHA1 for certificate digests instead of MD5.
942 See raddb/certs/*.cnf
943 * Added copyright statements to the dictionaries, so that we know
944 when people are using them.
945 * Better documentation for radrelay and detail file writer.
946 See raddb/modules/radrelay and raddb/radrelay.conf
947 * Added TLS-Cert-Subject-Alt-Name-Email from patch by Luke Howard
948 * Added -F <file> to radwho
949 * Added query timeouts to MySQL driver. Patch from Brian De Wolf.
950 * Add /etc/default/freeradius to debian package.
951 Patch from Matthew Newton
952 * Finalize DHCP and DHCP relay code. It should now work everywhere.
953 See raddb/sites-available/dhcp, src_ipaddr and src_interface.
954 * DHCP capabilitiies are now compiled in by default.
955 It runs as a DHCP server ONLY when manually enabled.
956 * Added one letter expansions: %G - request minute and %I request
958 * Added script to convert ISC DHCP lease files to SQL pools.
959 See scripts/isc2ippool.pl
960 * Added rlm_cache to cache arbitrary attributes.
961 * Added max_use to rlm_ldap to force connection to be re-established
962 after a given number of queries.
963 * Added configtest option to Debian init scripts, and automatic
964 config test on restart.
965 * Added cache config item to rlm_krb5. When set to "no" ticket
966 caching is disabled which may increase performance.
969 * Fix CVE-2012-3547. All users of 2.1.10, 2.1.11, 2.1.12,
970 and 802.1X should upgrade immediately.
971 * Fix typo in detail file writer, to skip writing if the packet
972 was read from this detail file.
973 * Free cached replies when closing resumed SSL sessions.
974 * Fix a number of issues found by Coverity.
975 * Fix memory leak and race condition in the EAP-TLS session cache.
976 Thanks to Phil Mayers for tracking down OpenSSL APIs.
977 * Restrict ATTRIBUTE names to character sets that make sense.
978 * Fix EAP-TLS session Id length so that OpenSSL doesn't get
980 * Fix SQL IPPool logic for non-timer attributes. Closes bug #181
981 * Change some informational messages to DEBUG rather than error.
982 * Portability fixes for FreeBSD. Closes bug #177
983 * A much better fix for the _lt__PROGRAM__LTX_preloaded_symbols
985 * Safely handle extremely long lines in conf file variable expansion
986 * Fix for Debian bug #606450
987 * Mutex lock around rlm_perl Clone routines. Patch from Eike Dehling
988 * The passwd module no longer permits "hashsize = 0". Setting that
989 is pointless for a host of reasons. It will also break the server.
990 * Fix proxied inner-tunnel packets sometimes having zero authentication
991 vector. Found by Brian Julin.
992 * Added $(EXEEXT) to Makefiles for portability. Closes bug #188.
993 * Fix minor build issue which would cause rlm_eap to be built twice.
994 * When using "status_check=request" for a home server, the username
995 and password must be specified, or the server will not start.
996 * EAP-SIM now calculates keys from the SIM identity, not from the
997 EAP-Identity. Changing the EAP type via NAK may result in
998 identities changing. Bug reported by Microsoft EAP team.
999 * Use home server src_ipaddr when sending Status-Server packets
1000 * Decrypt encrypted ERX attributes in CoA packets.
1001 * Fix registration of internal xlat's so %{mschap:...} doesn't
1002 disappear after a HUP.
1003 * Can now reference tagged attributes in expansions.
1004 e.g. %{Tunnel-Type:1} and %{Tunnel-Type:1[0]} now work.
1005 * Correct calculation of Message-Authenticator for CoA and Disconnect
1006 replies. Patch from Jouni Malinen
1007 * Install rad_counter, for managing rlm_counter files.
1008 * Add unique index constraint to all SQL flavours so that alternate
1009 queries work correctly.
1010 * The TTLS diameter decoder is now more lenient. It ignores
1011 unknown attributes, instead of rejecting the TTLS session.
1012 * Use "globfree" in detail file reader. Prevents very slow leak.
1014 * Operator =~ shouldn't copy the attribute, like :=. It should
1015 instead behave more like ==.
1016 * Build main Debian package without SQL dependencies
1017 * Use max_queue_size in threading code
1018 * Update permissions in raddb/sql/postgresql/admin.sql
1019 * Added OpenSSL_add_all_algorithms() to fix issues where OpenSSL
1020 wouldn't use methods it knew about.
1021 * Add more sanity checks in dynamic_clients code so the server won't
1022 crash if it attempts to load a badly formated client definition.
1024 * Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.12-10
1025 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
1027 * Fri Jun 08 2012 Petr Pisar <ppisar@redhat.com> - 2.1.12-9
1030 * Tue May 15 2012 John Dennis <jdennis@redhat.com> - 2.1.12-8
1031 - resolves: bug#821407 - openssl dependency
1033 * Sat Apr 14 2012 John Dennis <jdennis@redhat.com> - 2.1.12-7
1034 - resolves: bug#810605 Segfault with freeradius-perl threading
1036 * Tue Feb 28 2012 John Dennis <jdennis@redhat.com> - 2.1.12-6
1037 Fixing bugs in RHEL6 rebase, applying fixes here as well
1038 resolves: bug#700870 freeradius not compiled with --with-udpfromto
1039 resolves: bug#753764 shadow password expiration does not work
1040 resolves: bug#712803 radtest script is not working with eap-md5 option
1041 resolves: bug#690756 errors in raddb/sql/postgresql/admin.sql template
1043 * Tue Feb 7 2012 John Dennis <jdennis@redhat.com> - 2.1.12-5
1044 - resolves: bug#781877 (from RHEL5) rlm_dbm_parse man page misspelled
1045 - resolves: bug#760193 (from RHEL5) radtest PPPhint option is not parsed properly
1047 * Sun Jan 15 2012 John Dennis <jdennis@redhat.com> - 2.1.12-4
1048 - resolves: bug#781744
1049 systemd service file incorrectly listed pid file as
1050 /var/run/radiusd/radiusd which it should have been
1051 /var/run/radiusd/radiusd.pid
1053 * Fri Jan 13 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.12-3
1054 - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
1056 * Mon Oct 31 2011 John Dennis <jdennis@redhat.com> - 2.1.12-2
1057 - rename /etc/tmpfiles.d/freeradius.conf to /etc/tmpfiles.d/radiusd.conf
1058 remove config(noreplace) because it must match files section and
1059 permissions differ between versions.
1060 - fixup macro usage for /var/run & /var/lib
1062 * Mon Oct 3 2011 John Dennis <jdennis@redhat.com> - 2.1.12-1
1063 - Upgrade to latest upstream release: 2.1.12
1064 - Upstream changelog for 2.1.12:
1065 Feature improvements
1066 * Updates to dictionary.erx, dictionary.siemens, dictionary.starent,
1067 dictionary.starent.vsa1, dictionary.zyxel, added dictionary.symbol
1068 * Added support for PCRE from Phil Mayers
1069 * Configurable file permission in rlm_linelog
1070 * Added "relaxed" option to rlm_attr_filter. This copies attributes
1071 if at least one match occurred.
1072 * Added documentation on dynamic clients.
1073 See raddb/modules/dynamic_clients.
1074 * Added support for elliptical curve cryptography.
1075 See ecdh_curve in raddb/eap.conf.
1076 * Added support for 802.1X MIBs in checkrad
1077 * Added support for %{rand:...}, which generates a uniformly
1078 distributed number between 0 and the number you specify.
1079 * Created "man" pages for all installed commands, and documented
1080 options for all commands. Patch from John Dennis.
1081 * Allow radsniff to decode encrypted VSAs and CoA packets.
1082 Patch from Bjorn Mork.
1083 * Always send Message-Authenticator in radtest. Patch from John Dennis.
1084 radclient continues to be more flexible.
1085 * Updated Oracle schema and queries
1086 * Added SecurID module. See src/modules/rlm_securid/README
1089 * Fix memory leak in rlm_detail
1090 * Fix "failed to insert event"
1091 * Allow virtual servers to be reloaded on HUP.
1092 It no longer complains about duplicate virtual servers.
1093 * Fix %{string:...} expansion
1094 * Fix "server closed socket" loop in radmin
1095 * Set ownership of control socket when starting up
1096 * Always allow root to connect to control socket, even if
1097 "uid" is set. They're root. They can already do anything.
1098 * Save all attributes in Access-Accept when proxying inner-tunnel
1100 * Fixes for DHCP relaying.
1101 * Check certificate validity when using OCSP.
1102 * Updated Oracle "configure" script
1103 * Fixed typos in dictionary.alvarion
1104 * WARNING on potential proxy loop.
1105 * Be more aggressive about clearing old requests from the
1107 * Don't open network sockets when using -C
1109 * Wed Sep 21 2011 Tom Callaway <spot@fedoraproject.org> - 2.1.11-7
1110 - restore defattr customization in the main package
1112 * Fri Sep 9 2011 Tom Callaway <spot@fedoraproject.org> - 2.1.11-6
1113 - add missing systemd scriptlets
1115 * Thu Sep 8 2011 Tom Callaway <spot@fedoraproject.org> - 2.1.11-5
1116 - convert to systemd
1118 * Thu Jul 21 2011 Petr Sabata <contyk@redhat.com> - 2.1.11-4
1121 * Wed Jul 20 2011 Petr Sabata <contyk@redhat.com> - 2.1.11-3
1124 * Thu Jun 23 2011 John Dennis <jdennis@redhat.com> - 2.1.11-2
1125 - reload the server (i.e. HUP) after logrotate
1127 * Wed Jun 22 2011 John Dennis <jdennis@redhat.com> - 2.1.11-1
1128 - Upgrade to latest upstream release: 2.1.11
1129 - Remove the following two patches as upstream has incorporated them:
1130 freeradius-radtest-ipv6.patch
1131 freeradius-lt-dladvise.patch
1132 - Upstream changelog for 2.1.11:
1133 Feature improvements
1134 * Added doc/rfc/rfc6158.txt: RADIUS Design Guidelines.
1135 All vendors need to read it and follow its directions.
1136 * Microsoft SoH support for PEAP from Phil Mayers.
1138 * Certificate "bootstrap" script now checks for certificate expiry.
1139 See comments in raddb/eap.conf, and then "make_cert_command".
1140 * Support for dynamic expansion of EAP-GTC challenges.
1141 Patch from Alexander Clouter.
1142 * OCSP support from Alex Bergmann. See raddb/eap.conf, "ocsp"
1144 * Updated dictionary.huawei, dictionary.3gpp, dictionary.3gpp3.
1145 * Added dictionary.eltex, dictionary.motorola, and dictionary.ukerna.
1146 * Experimental redis support from Gabriel Blanchard.
1147 See raddb/modules/redis and raddb/modules/rediswho
1148 * Add "key" to rlm_fastusers. Closes bug #126.
1149 * Added scripts/radtee from original software at
1150 http://horde.net/~jwm/software/misc/comparison-tee
1151 * Updated radmin "man" page for new commands.
1152 * radsniff now prints the hex decoding of the packet (-x -x -x)
1153 * mschap module now reloads its configuration on HUP
1154 * Added experimental "replicate" module. See raddb/modules/replicate
1155 * Policy "foo" can now refer to module "foo". This lets you
1156 over-ride the behavior of a module.
1157 * Policy "foo.authorize" can now over-ride the behavior of module
1158 "foo", "authorize" method.
1159 * Produce errors in more situations when the configuration files
1160 have invalid syntax.
1163 * Ignore pre/post-proxy sections if proxying is disabled
1164 * Add configure checks for pcap_fopen*.
1165 * Fix call to otp_write in rlm_otp
1166 * Fix issue with Access-Challenge checking from 2.1.10, when the
1167 debug flag was set after server startup. Closes #116 and #117.
1168 * Fix typo in zombie period start time.
1169 * Fix leak in src/main/valuepair.c. Patch from James Ballantine.
1170 * Allow radtest to use spaces in shared secret.
1171 Patch from Cedric Carree.
1172 * Remove extra calls to HMAC_CTX_init() in rlm_wimax, fixing leak.
1173 Patch from James Ballantine.
1174 * Remove MN-FA key generation. The NAS does this, not AAA.
1175 Patch from Ben Weichman.
1176 * Include dictionary.mikrotik by default. Closes bug #121.
1177 * Add group membership query to MS-SQL examples. Closes bug #120.
1178 * Don't cast NAS-Port to integer in Postgresql queries.
1180 * Fixes for libtool and autoconf from Sam Hartman.
1181 * radsniff should read the dictionaries in more situations.
1182 * Use fnmatch to check for detail file reader==writer.
1184 * Check for short writes (i.e. disk full) in rlm_detail.
1185 Closes bug #130. Patches and testing from John Morrissey.
1186 * Fix typo in src/lib/token.c. Closes bug #124
1187 * Allow workstation trust accounts to use MS-CHAP.
1189 * Assigning foo=`/bin/echo hello` now produces a syntax error
1190 if it is done outside of an "update" section.
1191 * Fix "too many open file descriptors" problem when using
1192 "verify client" in eap.conf.
1193 * Many fixes to dialup_admin for PHP5, by Stefan Winter.
1194 * Allow preprocess module to have "hints = " and "huntgroups =",
1195 which allows them to be empty or non-existent.
1196 * Renamed "php3" files to "php" in dialup_admin/
1197 * Produce error when sub-TLVs are used in a dictionary. They are
1198 supported only in the "master" branch, and not in 2.1.x.
1199 * Minor fix in dictionary.redback. Closes bug #138.
1200 * Fixed MySQL "NULL" issues in ippool.conf. Closes bug #129.
1201 * Fix to Access-Challenge warning from Ken-ichirou Matsuzawa.
1203 * DHCP fixes to send unicast packets in more situations.
1204 * Fix to udpfromto, to enable it to work on IPv6 networks.
1205 * Fixes to the Oracle accounting_onoff_query.
1206 * When using both IPv4 and IPv6 home servers, ensure that we use the
1207 correct local socket for proxying. Closes bug #143.
1208 * Suppress messages when thread pool is nearly full, all threads
1209 are busy, and we can't create new threads.
1210 * IPv6 is now enabled for udpfromto. Closes bug #141
1211 * Make sqlippool query buffer the same size as sql module.
1213 * Make Coa / Disconnect proxying work again.
1214 * Configure scripts for rlm_caching from Nathaniel McCallum
1215 * src/lib/dhcp.c and src/include/libradius.h are LGPL, not GPL.
1216 * Updated password routines to use time-insensitive comparisons.
1217 This prevents timing attacks (though none are known).
1218 * Allow sqlite module to do normal SELECT queries.
1219 * rlm_wimax now has a configure script
1220 * Moved Ascend, USR, and Motorola "illegal" dictionaries to separate
1221 files. See share/dictionary for explanations.
1222 * Check for duplicate module definitions in the modules{} section,
1223 and refuse to start if duplicates are found.
1224 * Check for duplicate virtual servers, and refuse to start if
1225 duplicates are found.
1226 * Don't use udpfromto if source is INADDR_ANY. Closes bug #148.
1227 * Check pre-conditions before running radmin "inject file".
1228 * Don't over-ride "no match" with "match" for regexes.
1230 * Make retry and error message configurable in mschap.
1231 See raddb/modules/mschap
1232 * Allow EAP-MSCHAPv2 to send error message to client. This change
1233 allows some clients to prompt the user for a new password.
1234 See raddb/eap.conf, mschapv2 section, "send_error".
1235 * Load the default virtual server before any others.
1236 This matches what users expect, and reduces confusion.
1237 * Fix configure checks for udpfromto. Fixes Debian bug #606866
1238 * Definitive fix for bug #35, where the server could crash under
1239 certain loads. Changes src/lib/packet.c to use RB trees.
1240 * Updated "configure" checks to allow IPv6 udpfromto on Linux.
1241 * SQL module now returns NOOP if the accounting start/interim/stop
1242 queries don't do anything.
1243 * Allow %%{outer.control: ... } in string expansions
1244 * home_server coa config now matches raddb/proxy.conf
1245 * Never send a reply to a DHCP Release.
1247 * Thu Jun 16 2011 Marcela Mašláňová <mmaslano@redhat.com> - 2.1.10-8
1250 * Wed Mar 23 2011 John Dennis <jdennis@redhat.com> - 2.1.10-7
1251 - Resolves: #689045 Using rlm_perl cause radiusd failed to start
1252 Fix configure typo which caused lt_dladvise_* functions to be skipped.
1253 run autogen.sh because HAVE_LT_DLADVISE_INIT isn't in src/main/autogen.h
1254 Implemented by: freeradius-lt-dladvise.patch
1256 * Wed Mar 23 2011 John Dennis <jdennis@redhat.com> - 2.1.10-6
1257 - Resolves: #599528 - make radtest IPv6 compatible
1259 * Wed Mar 23 2011 Dan Horák <dan@danny.cz> - 2.1.10-5
1260 - rebuilt for mysql 5.5.10 (soname bump in libmysqlclient)
1262 * Tue Feb 08 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.10-4
1263 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
1265 * Sat Jan 1 2011 John Dennis <jdennis@redhat.com> - 2.1.10-3
1266 - bug 666589 - removing freeradius from system does not delete the user "radiusd"
1267 fix scriptlet argument testing, simplify always exiting with zero
1269 * Thu Dec 30 2010 John Dennis <jdennis@redhat.com> - 2.1.10-2
1270 - rebuild for new MySQL libs
1272 * Tue Oct 19 2010 John Dennis <jdennis@redhat.com> - 2.1.10-1
1273 Feature improvements
1274 * Install the "radcrypt" program.
1275 * Enable radclient to send requests containing MS-CHAPv1
1276 Send packets with: MS-CHAP-Password = "password". It will
1277 be automatically converted to the correct MS-CHAP attributes.
1278 * Added "-t" command-line option to radtest. You can use "-t pap",
1279 "-t chap", "-t mschap", or "-t eap-md5". The default is "-t pap"
1280 * Make the "inner-tunnel" virtual server listen on 127.0.0.1:18120
1281 This change and the previous one makes PEAP testing much easier.
1282 * Added more documentation and examples for the "passwd" module.
1283 * Added dictionaries for RFC 5607 and RFC 5904.
1284 * Added note in proxy.conf that we recommend setting
1285 "require_message_authenticator = yes" for all home servers.
1286 * Added example of second "files" configuration, with documentation.
1287 This shows how and where to use two instances of a module.
1288 * Updated radsniff to have it write pcap files, too. See '-w'.
1289 * Print out large WARNING message if we send an Access-Challenge
1290 for EAP, and receive no follow-up messages from the client.
1291 * Added Cached-Session-Policy for EAP session resumption. See
1293 * Added support for TLS-Cert-* attributes. For details, see
1294 raddb/sites-available/default, "post-auth" section.
1295 * Added sample raddb/modules/{opendirectory,dynamic_clients}
1296 * Updated Cisco and Huawei, HP, Redback, and ERX dictionaries.
1297 * Added RFCs 5607, 5904, and 5997.
1298 * For EAP-TLS, client certificates can now be validated using an
1299 external command. See eap.conf, "validate" subsection of "tls".
1300 * Made rlm_pap aware of {nthash} prefix, for compatibility with
1301 legacy RADIUS systems.
1302 * Add Module-Failure-Message for mschap module (ntlm_auth)
1303 * made rlm_sql_sqlite database configurable. Use "filename"
1305 * Added %%{tolower: ...string ... }, which returns the lowercase
1306 version of the string. Also added %%{toupper: ... } for uppercase.
1309 * Fix endless loop when there are multiple sub-options for
1311 * More debug output when sending / receiving DHCP packets.
1312 * EAP-MSCHAPv2 should return the MPPE keys when used outside
1313 of a TLS tunnel. This is needed for IKE.
1314 * Added SSL "no ticket" option to prevent SSL from creating sessions
1315 without IDs. We need the IDs, so this option should be set.
1316 * Fix proxying of packets from inside a TTLS/PEAP tunnel.
1318 * Allow IPv6 address attributes to be created from domain names
1320 * Set the string length to the correct value when parsing double
1321 quotes. Closes bug #88.
1322 * No longer look users up in /etc/passwd in the default configuration.
1323 This can be reverted by enabling "unix" in the "authorize" section.
1324 * More #ifdef's to enable building on systems without certain
1326 * Fixed SQL-Group comparison to register only if the group
1328 * Fixed SQL-Group comparison to register <instance>-SQL-Group,
1329 just like rlm_ldap. This lets you have multiple SQL group checks.
1330 * Fix scanning of octal numbers in "unlang". Closes bug #89.
1331 * Be less aggressive about freeing "stuck" requests. Closes bug #35.
1332 * Fix example in "originate-coa" to refer to the correct packet.
1333 * Change default timeout for dynamic clients to 1 hour, not 1 day.
1334 * Allow passwd module to map IP addresses, too.
1335 * Allow passwd module to be used for CoA packets
1336 * Put boot filename into DHCP header when DHCP-Boot-Filename
1338 * raddb/certs/Makefile no longer has certs depend on index.txt and
1339 serial. Closes bug #64.
1340 * Ignore NULL errorcode in PostgreSQL client. Closes bug #39
1341 * Made Exec-Program and Exec-Program-Wait work in accounting
1342 section again. See sites-available/default.
1343 * Fix long-standing memory leak in esoteric conditions. Found
1345 * Added "Password-With-Header == userPassword" to raddb/ldap.attrmap
1346 This will automatically convert more passwords.
1347 * Updated rlm_pap to decode Password-With-Header, if it was base64
1348 encoded, and to treat the contents as potentially binary data.
1349 * Fix Novell eDir code to use the right function parameters.
1351 * Allow spaces to be escaped when executing external programs.
1353 * Be less restrictive about checking permissions on control socket.
1354 If we're root, allow connecting to a non-root socket.
1355 * Remove control socket on normal server exit. If the server isn't
1356 running, the control socket should not exist.
1357 * Use MS-CHAP-User-Name as Name field from EAP-MSCHAPv2 for MS-CHAP
1358 calculations. It *MAY* be different (upper / lower case) from
1359 the User-Name attribute. Closes bug #17.
1360 * If the EAP-TLS methods have problems, more SSL errors are now
1361 available in the Module-Failure-Message attribute.
1362 * Update Oracle configure scripts. Closes bug #57.
1363 * Added text to DESC fields of doc/examples/openldap.schema
1364 * Updated more documentation to use "Restructured Text" format.
1365 Thanks to James Lockie.
1366 * Fixed typos in raddb/sql/mssql/dialup.conf. Closes bug #11.
1367 * Return error for potential proxy loops when using "-XC"
1368 * Produce better error messages when slow databases block
1370 * Added notes on DHCP broadcast packets for FreeBSD.
1371 * Fixed crash when parsing some date strings. Closes bug #98
1372 * Improperly formatted Attributes are now printed as "Attr-##".
1373 If they are not correct, they should not use the dictionary name.
1374 * Fix rlm_digest to be check the format of the Digest attributes,
1375 and return "noop" rather than "fail" if they're not right.
1376 * Enable "digest" in raddb/sites-available/default. This change
1377 enables digest authentication to work "out of the box".
1378 * Be less aggressive about marking home servers as zombie.
1379 If they are responding to some packets, they are still alive.
1380 * Added Packet-Transmit-Counter, to track detail file retransmits.
1382 * Added configure check for lt_dladvise_init(). If it exists, then
1383 using it solves some issues related to libraries loading libraries.
1384 * Added indexes to the MySQL IP Pool schema.
1385 * Print WARNING message if too many attributes are put into a packet.
1386 * Include dhcp test client (not built by default)
1387 * Added checks for LDAP constraint violation. Closes bug #18.
1388 * Change default raddebug timeout to 60 seconds.
1389 * Made error / warning messages more consistent.
1390 * Correct back-slash handling in variable expansion. Closes bug #46.
1391 You SHOULD check your configuration for backslash expansion!
1392 * Fix typo in "configure" script (--enable-libltdl-install)
1393 * Use local libltdl in more situations. This helps to avoid
1394 compile issues complaining about lt__PROGRAM__LTX_preloaded_symbols.
1395 * Fix hang on startup when multiple home servers were defined
1396 with "src_ipaddr" field.
1397 * Fix 32/64 bit issue in rlm_ldap. Closes bug #105.
1398 * If the first "listen" section defines 127.0.0.1, don't use that
1399 as a source IP for proxying. It won't work.
1400 * When Proxy-To-Realm is set to a non-existent realm, the EAP module
1401 should handle the request, rather than expecting it to be proxied.
1402 * Fix IPv4 issues with udpfromto. Closes bug #110.
1403 * Clean up child processes of raddebug. Closes bugs #108 and #109
1404 * retry OTP if the OTP daemon fails. Closes bug #58.
1405 * Multiple calls to ber_printf seem to work better. Closes #106.
1406 * Fix "unlang" so that "attribute not found" is treated as a "false"
1407 comparison, rather than a syntax error in the configuration.
1408 * Fix issue with "Group" attribute.
1410 * Sat Jul 31 2010 Orcan Ogetbil <oget[dot]fedora[at]gmail[dot]com> - 2.1.9-3
1411 - Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
1413 * Tue Jun 01 2010 Marcela Maslanova <mmaslano@redhat.com> - 2.1.9-2
1414 - Mass rebuild with perl-5.12.0
1416 * Mon May 24 2010 John Dennis <jdennis@redhat.com> - 2.1.9-1
1417 - update to latest upstream, mainly bug fix release
1418 Feature improvements
1419 * Add radmin command "stats detail <file>" to see what
1420 is going on inside of a detail file reader.
1421 * Added documentation for CoA. See raddb/sites-available/coa
1422 * Add sub-option support for Option 82. See dictionary.dhcp
1423 * Add "server" field to default SQL NAS table, and documented it.
1426 * Reset "received ping" counter for Status-Server checks. In some
1427 corner cases it was not getting reset.
1428 * Handle large VMPS attributes.
1429 * Count accounting responses from a home server in SNMP / statistics
1431 * Set EAP-Session-Resumed = Yes, not "No" when session is resumed.
1432 * radmin packet counter statistics are now unsigned, for numbers
1433 2^31..2^32. After that they roll over to zero.
1434 * Be more careful about expanding data in PAP and MS-CHAP modules.
1435 This prevents login failures when passwords contain '{'.
1436 * Clean up zombie children if there were many "exec" modules being
1437 run for one packet, all with "wait = no".
1438 * re-open log file after HUP. Closes bug #63.
1439 * Fix "no response to proxied packet" complaint for Coa / Disconnect
1440 packets. It shouldn't ignore replies to packets it sent.
1441 * Calculate IPv6 netmasks correctly. Closes bug #69.
1442 * Fix SQL module to re-open sockets if they unexpectedly close.
1443 * Track scope for IPv6 addresses. This lets us use link-local
1444 addresses properly. Closes bug #70.
1445 * Updated Makefiles to no longer use the shell for recursing into
1446 subdirs. "make -j 2" should now work.
1447 * Updated raddb/sql/mysql/ippool.conf to use "= NULL". Closes
1449 * Updated Makefiles so that "make reconfig" no longer uses the shell
1450 for recursing into subdirs, and re-builds all "configure" files.
1451 * Used above method to regenerate all configure scripts.
1453 * Updated SQL module to allow "server" field of "nas" table
1454 to be blank: "". This means the same as it being NULL.
1455 * Fixed regex realm example. Create Realm attribute with value
1456 of realm from User-Name, not from regex. Closes bug #40.
1457 * If processing a DHCP Discover returns "fail / reject", ignore
1458 the packet rather than sending a NAK.
1459 * Allow '%%' to be escaped in sqlcounter module.
1460 * Fix typo internal hash table.
1461 * For PEAP and TTLS, the tunneled reply is added to the reply,
1462 rather than integrated via the operators. This allows multiple
1463 VSAs to be added, where they would previously be discarded.
1464 * Make request number unsigned. This changes nothing other than
1465 the debug output when the server receives more than 2^31 packets.
1466 * Don't block when reading child output in 'exec wait'. This means
1467 that blocked children get killed, instead of blocking the server.
1468 * Enabled building without any proxy functionality
1469 * radclient now prefers IPv4, to match the default server config.
1470 * Print useful error when a realm regex is invalid
1471 * relaxed rules for preprocess module "with_cisco_vsa_hack". The
1472 attributes can now be integer, ipaddr, etc. (i.e. non-string)
1473 * Allow rlm_ldap to build if ldap_set_rebind_proc() has only
1475 * Update configure script for rlm_python to avoid dynamic linking
1476 problems on some platforms.
1477 * Work-around for bug #35
1478 * Do suid to "user" when running in debug mode as root
1479 * Make "allow_core_dumps" work in more situations.
1480 * In detail file reader, treat bad records as EOF.
1481 This allows it to continue working when the disk is full.
1482 * Fix Oracle default accounting queries to work when there are no
1483 gigawords attributes. Other databases already had the fix.
1484 * Fix rlm_sql to show when it opens and closes sockets. It already
1485 says when it cannot connect, so it should say when it can connect.
1486 * "chmod -x" for a few C source files.
1487 * Pull update spec files, etc. from RedHat into the redhat/ directory.
1488 * Allow spaces when parsing integer values. This helps people who
1489 put "too much" into an SQL value field.
1491 * Thu Jan 7 2010 John Dennis <jdennis@redhat.com> - 2.1.8-2
1492 - resolves: bug #526559 initial install should run bootstrap to create certificates
1493 running radiusd in debug mode to generate inital temporary certificates
1494 is no longer necessary, the /etc/raddb/certs/bootstrap is invoked on initial
1495 rpm install (not upgrade) if there is no existing /etc/raddb/certs/server.pem file
1496 - resolves: bug #528493 use sha1 algorithm instead of md5 during cert generation
1497 the certificate configuration (/etc/raddb/certs/{ca,server,client}.cnf) files
1498 were modifed to use sha1 instead of md5 and the validity reduced from 1 year to 2 months
1500 * Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.8-1
1501 - update to latest upstream
1502 Feature improvements
1503 * Print more descriptive error message for too many EAP sessions.
1504 This gives hints on what to do when "failed to store handler"
1505 * Commands received from radmin are now printed on stdout when
1507 * Allow accounting packets to be written to a detail file, even
1508 if they were read from a different detail file.
1509 * Added OpenSSL license exception (src/LICENSE.openssl)
1512 * DHCP sockets can now set the broadcast flag before binding to a
1513 socket. You need to set "broadcast = yes" in the DHCP listener.
1514 * Be more restrictive on string parsing in the config files
1515 * Fix password length in scripts/create-users.pl
1516 * Be more flexible about parsing the detail file. This allows
1517 it to read files where the attributes have been edited.
1518 * Ensure that requests read from the detail file are cleaned up
1519 (i.e. don't leak) if they are proxied without a response.
1520 * Write the PID file after opening sockets, not before
1522 * Proxying large numbers of packets no longer gives error
1523 "unable to open proxy socket".
1524 * Avoid mutex locks in libc after fork
1525 * Retry packet from detail file if there was no response.
1526 * Allow old-style dictionary formats, where the vendor name is the
1527 last field in an ATTRIBUTE definition.
1528 * Removed all recursive use of mutexes. Some systems just don't
1530 * Allow !* to work as documented.
1531 * make templates work (see templates.conf)
1532 * Enabled "allow_core_dumps" to work again
1533 * Print better errors when reading invalid dictionaries
1534 * Sign client certificates with CA, rather than server certs.
1535 * Fix potential crash in rlm_passwd when file was closed
1536 * Fixed corner cases in conditional dynamic expansion.
1537 * Use InnoDB for MySQL IP Pools, to gain transactional support
1538 * Apply patch to libltdl for CVE-2009-3736.
1539 * Fixed a few issues found by LLVM's static checker
1540 * Keep track of "bad authenticators" for accounting packets
1541 * Keep track of "dropped packets" for auth/acct packets
1542 * Synced the "debian" directory with upstream
1543 * Made "unlang" use unsigned 32-bit integers, to match the
1546 * Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.7-7
1547 - Remove devel subpackage. It doesn't make much sense to have a devel package since
1548 we don't ship libraries and it produces multilib conflicts.
1550 * Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-6
1551 - more spec file clean up from review comments
1552 - remove freeradius-libs subpackage, move libfreeradius-eap and
1553 libfreeradius-radius into the main package
1554 - fix subpackage requires, change from freeradius-libs to main package
1555 - fix description of the devel subpackage, remove referene to non-shipped libs
1556 - remove execute permissions on src files included in debuginfo
1557 - remove unnecessary use of ldconfig
1558 - since all sub-packages now require main package remove user creation for sub-packages
1559 - also include the LGPL library license file in addition to the GPL license file
1560 - fix BuildRequires for perl so it's compatible with both Fedora, RHEL5 and RHEL6
1562 * Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-5
1563 - fix various rpmlint issues.
1565 * Fri Dec 4 2009 Stepan Kasal <skasal@redhat.com> - 2.1.7-4
1566 - rebuild against perl 5.10.1
1568 * Thu Dec 3 2009 John Dennis <jdennis@redhat.com> - 2.1.7-3
1569 - resolves: bug #522111 non-conformant initscript
1570 also change permission of /var/run/radiusd from 0700 to 0755
1571 so that "service radiusd status" can be run as non-root
1573 * Wed Sep 16 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.7-2
1574 - use password-auth common PAM configuration instead of system-auth
1576 * Tue Sep 15 2009 John Dennis <jdennis@redhat.com> - 2.1.7-1
1577 - enable building of the rlm_wimax module
1578 - pcap wire analysis support is enabled and available in utils subpackage
1579 - Resolves bug #523053 radtest manpage in wrong package
1580 - update to latest upstream release, from upstream Changelog:
1581 Feature improvements
1582 * Full support for CoA and Disconnect packets as per RFC 3576
1583 and RFC 5176. Both receiving and proxying CoA is supported.
1584 * Added "src_ipaddr" configuration to "home_server". See
1585 proxy.conf for details.
1586 * radsniff now accepts -I, to read from a filename instead of
1588 * radsniff also prints matching requests and any responses to those
1589 requests when '-r' is used.
1590 * Added example of attr_filter for Access-Challenge packets
1591 * Added support for udpfromto in DHCP code
1592 * radmin can now selectively mark modules alive/dead.
1593 See "set module state".
1594 * Added customizable messages on login success/fail.
1595 See msg_goodpass && msg_badpass in log{} section of radiusd.conf
1596 * Document "chase_referrals" and "rebind" in raddb/modules/ldap
1597 * Preliminary implementation of DHCP relay.
1598 * Made thread pool section optional. If it doesn't exist,
1599 the server will run single-threaded.
1600 * Added sample radrelay.conf for people upgrading from 1.x
1601 * Made proxying more stable by failing over, rather than
1602 rejecting the first request. See "response_window" in proxy.conf
1603 * Allow home_server_pools to exist without realms.
1604 * Add dictionary.iea (closes bug #7)
1605 * Added support for RFC 5580
1606 * Added experimental sql_freetds module from Gabriel Blanchard.
1607 * Updated dictionary.foundry
1608 * Added sample configuration for MySQL cluster in raddb/sql/ndb
1609 See the README file for explanations.
1611 * Fixed corner case where proxied packets could have extra
1612 character in User-Password attribute. Fix from Niko Tyni.
1613 * Extended size of "attribute" field in SQL to 64.
1614 * Fixes to ruby module to be more careful about when it builds.
1615 * Updated Perl module "configure" script to check for broken
1617 * Fix "status_check = none". It would still send packets
1619 * Set recursive flag on the proxy mutex, which enables safer
1620 cleanup on some platforms.
1621 * Copy the EAP username verbatim, rather than escaping it.
1622 * Update handling so that robust-proxy-accounting works when
1623 all home servers are down for extended periods of time.
1624 * Look for DHCP option 53 anywhere in the packet, not just
1626 * Fix processing of proxy fail handler with virtual servers.
1627 * DHCP code now prints out correct src/dst IP addresses
1628 when sending packets.
1629 * Removed requirement for DHCP to have clients
1630 * Fixed handling of DHCP packets with message-type buried in the packet
1631 * Fixed corner case with negation in unlang.
1632 * Minor fixes to default MySQL & PostgreSQL schemas
1633 * Suppress MSCHAP complaints in debugging mode.
1634 * Fix SQL module for multiple instance, and possible crash on HUP
1635 * Fix permissions for radius.log for sites that change user/group,
1636 but which don't create the file before starting radiusd.
1637 * Fix double counting of packets when proxying
1639 * Fix pthread keys in rlm_perl
1640 * Log reasons for EAP failure (closes bug #8)
1641 * Load home servers and pools that aren't referenced from a realm.
1642 * Handle return codes from virtual attributes in "unlang"
1643 (e.g. LDAP-Group). This makes "!(expr)" work for them.
1644 * Enable VMPS to see contents of virtual server again
1645 * Fix WiMAX module to be consistent with examples. (closes bug #10)
1646 * Fixed crash with policies dependent on NAS-Port comparisons
1647 * Allowed vendor IDs to be be higher than 32767.
1648 * Fix crash on startup with certain regexes in "hints" file.
1649 * Fix crash in attr_filter module when packets don't exist
1650 * Allow detail file reader to be faster when "load_factor = 100"
1651 * Add work-around for build failures with errors related to
1652 lt__PROGRAM__LTX_preloaded_symbols. libltdl / libtool are horrible.
1653 * Made ldap module "rebind" option aware of older, incompatible
1654 versions of OpenLDAP.
1655 * Check value of Fall-Through in attr_filter module.
1657 * Fri Aug 21 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.6-6
1658 - rebuilt with new openssl
1660 * Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.6-5
1661 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
1663 * Fri Jul 10 2009 John Dennis <jdennis@redhat.com> - 2.1.6-4
1664 - install COPYRIGHT CREDITS INSTALL LICENSE README into docdir
1666 * Tue Jun 23 2009 John Dennis <jdennis@redhat.com> - 2.1.6-3
1667 - resolves bug #507571 freeradius packages do not check for user/group existence
1669 * Tue Jun 2 2009 John Dennis <jdennis@redhat.com> - 2.1.6-2
1670 - make /etc/raddb/sites-available/* be config(noreplace)
1672 * Mon May 18 2009 John Dennis <jdennis@redhat.com> - 2.1.6-1
1673 - update to latest upstream release, from upstream Changelog:
1674 Feature improvements
1675 * radclient exits with 0 on successful (accept / ack), and 1
1676 otherwise (no response / reject)
1677 * Added support for %%{sql:UPDATE ..}, and insert/delete
1678 Patch from Arran Cudbard-Bell
1679 * Added sample "do not respond" policy. See raddb/policy.conf
1680 and raddb/sites-available/do_not_respond
1681 * Cleanups to Suse spec file from Norbert Wegener
1682 * New VSAs for Juniper from Bjorn Mork
1683 * Include more RFC dictionaries in the default install
1684 * More documentation for the WiMAX module
1685 * Added "chase_referrals" and "rebind" configuration to rlm_ldap.
1686 This helps with Active Directory. See raddb/modules/ldap
1687 * Don't load pre/post-proxy if proxying is disabled.
1688 * Added %%{md5:...}, which returns MD5 hash in hex.
1689 * Added configurable "retry_interval" and "poll_interval"
1690 for "detail" listeners.
1691 * Added "delete_mppe_keys" configuration option to rlm_wimax.
1692 Apparently some WiMAX clients misbehave when they see those keys.
1693 * Added experimental rlm_ruby from
1694 http://github.com/Antti/freeradius-server/tree/master
1695 * Add Tunnel attributes to ldap.attrmap
1696 * Enable virtual servers to be reloaded on HUP. For now, only
1697 the "authorize", "authenticate", etc. processing sections are
1698 reloaded. Clients and "listen" sections are NOT reloaded.
1699 * Updated "radwatch" script to be more robust. See scripts/radwatch
1700 * Added certificate compatibility notes in raddb/certs/README,
1701 for compatibility with different operating systems. (i.e. Windows)
1702 * Permit multiple "-e" in radmin.
1703 * Add support for originating CoA-Request and Disconnect-Request.
1704 See raddb/sites-available/originate-coa.
1705 * Added "lifetime" and "max_queries" to raddb/sql.conf.
1706 This helps address the problem of hung SQL sockets.
1707 * Allow packets to be injected via radmin. See "inject help"
1709 * Answer VMPS reconfirmation request. Patch from Hermann Lauer.
1710 * Sample logrotate script in scripts/logrotate.freeradius
1711 * Add configurable poll interval for "detail" listeners
1712 * New "raddebug" command. This prints debugging information from
1713 a running server. See "man raddebug.
1714 * Add "require_message_authenticator" configuration to home_server
1715 configuration. This makes the server add Message-Authenticator
1716 to all outgoing Access-Request packets.
1717 * Added smsotp module, as contributed by Siemens.
1718 * Enabled the administration socket in the default install.
1719 See raddb/sites-available/control-socket, and "man radmin"
1720 * Handle duplicate clients, such as with replicated or
1721 load-balanced SQL servers and "readclients = yes"
1723 * Minor changes to allow building without VQP.
1724 * Minor fixes from John Center
1725 * Fixed raddebug example
1726 * Don't crash when deleting attributes via unlang
1727 * Be friendlier to very fast clients
1728 * Updated the "detail" listener so that it only polls once,
1729 and not many times in a row, leaking memory each time...
1730 * Update comparison for Packet-Src-IP-Address (etc.) so that
1731 the operators other than '==' work.
1732 * Did autoconf magic to work around weird libtool bug
1733 * Make rlm_perl keep tags for tagged attributes in more situations
1734 * Update UID checking for radmin
1735 * Added "include_length" field for TTLS. It's needed for RFC
1736 compliance, but not (apparently) for interoperability.
1737 * Clean up control sockets when they are closed, so that we don't
1739 * Define SUN_LEN for systems that don't have it.
1740 * Correct some boundary conditions in the conditional checker ("if")
1741 in "unlang". Bug noted by Arran Cudbard-Bell.
1742 * Work around minor building issues in gmake. This should only
1743 have affected developers.
1744 * Change how we manage unprivileged user/group, so that we do not
1745 create control sockets owned by root.
1746 * Fixed more minor issues found by Coverity.
1747 * Allow raddb/certs/bootstrap to run when there is no "make"
1749 * In radiusd.conf, run_dir depends on the name of the program,
1750 and isn't hard-coded to "..../radiusd"
1751 * Check for EOF in more places in the "detail" file reader.
1752 * Added Freeswitch dictionary.
1753 * Chop ethernet frames in VMPS, rather than droppping packets.
1754 * Fix EAP-TLS bug. Patch from Arnaud Ebalard
1755 * Don't lose string for regex-compares in the "users" file.
1756 * Expose more functions in rlm_sql to rlm_sqlippool, which
1757 helps on systems where RTLD_GLOBAL is off.
1758 * Fix typos in MySQL schemas for ippools.
1759 * Remove macro that was causing build issues on some platforms.
1760 * Fixed issues with dead home servers. Bug noted by Chris Moules.
1761 * Fixed "access after free" with some dynamic clients.
1763 - fix packaging bug, some directories missing execute permission
1764 /etc/raddb/dictionary now readable by all.
1766 * Tue Feb 24 2009 John Dennis <jdennis@redhat.com> - 2.1.3-4
1767 - fix type usage in unixodbc to match new type usage in unixodbc API
1769 * Thu Feb 19 2009 John Dennis <jdennis@redhat.com> - 2.1.3-3
1770 - add pointer to Red Hat documentation in docdir
1772 * Sat Jan 24 2009 Caolán McNamara <caolanm@redhat.com> - 2.1.3-2
1773 - rebuild for dependencies
1775 * Thu Dec 4 2008 John Dennis <jdennis@redhat.com> - 2.1.3-1
1776 - upgrade to latest upstream release, upstream summary follows:
1777 The focus of this release is stability.
1778 Feature Improvements:
1779 * Allow running with "user=radiusd" and binding to secure sockets.
1780 * Start sending Status-Server "are you alive" messages earlier, which
1781 helps with proxying multiple realms to a home server.
1782 * Removed thread pool code from rlm_perl. It's not necessary.
1783 * Added example Perl configuration to raddb/modules/perl
1784 * Force OpenSSL to support certificates with SHA256. This seems to be
1785 necessary for WiMAX certs.
1787 * Fix Debian patch to allow it to build.
1788 * Fix potential NULL dereference in debugging mode on certain
1789 platforms for TTLS and PEAP inner tunnels.
1790 * Fix uninitialized memory in handling of vendor definitions
1791 * Fix parsing of quoted (but non-string) attributes in the "users" file.
1792 * Initialize uknown NAS IP to 255.255.255.255, rather than 0.0.0.0
1793 * use SUN_LEN in control socket, to avoid truncation on some platforms.
1794 * Correct internal handling of "debug condition" to prevent it from
1796 * Check return code of regcomp in "unlang", so that invalid regular
1797 expressions are caught rather than mishandled.
1798 * Make rlm_sql use <ltdl.h>. Addresses bug #610.
1799 * Document list "type = status" better. Closes bug #580.
1800 * Set "default days" for certificates, because OpenSSL won't do it.
1801 This closes bug #615.
1802 * Reference correct list in example raddb/modules/ldap. Closes #596.
1803 * Increase default schema size for Acct-Session-Id to 64. Closes #540.
1804 * Fix use of temporary files in dialup-admin. Closes #605 and
1805 addresses CVE-2008-4474.
1806 * Addressed a number of minor issues found by Coverity.
1807 * Added DHCP option 150 to the dictionary. Closes #618.
1809 * Wed Dec 3 2008 John Dennis <jdennis@redhat.com> - 2.1.1-8
1810 - add --with-system-libtool to configure as a workaround for
1811 undefined reference to lt__PROGRAM__LTX_preloaded_symbols
1813 * Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
1814 - add obsoletes tag for dialupadmin subpackages which were removed
1816 * Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
1817 - add readline-devel BuildRequires
1819 * Sun Nov 30 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.1.1-4
1820 - Rebuild for Python 2.6
1822 * Fri Nov 21 2008 John Dennis <jdennis@redhat.com> - 2.1.1-3
1823 - make spec file buildable on RHEL5.2 by making perl-devel a fedora only dependency.
1824 - remove diaupadmin packages, it's not well supported and there are problems with it.
1826 * Fri Sep 26 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
1827 - Resolves: bug #464119 bootstrap code could not create initial certs in /etc/raddb/certs because
1828 permissions were 750, radiusd running as euid radiusd could not write there, permissions now 770
1830 * Thu Sep 25 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
1831 - upgrade to new upstream 2.1.1 release
1833 * Wed Jul 30 2008 John Dennis <jdennis@redhat.com> - 2.0.5-2
1834 - Resolves: bug #453761: FreeRADIUS %%post should not include chown -R
1835 specify file attributes for /etc/raddb/ldap.attrmap
1836 fix consistent use of tabs/spaces (rpmlint warning)
1838 * Mon Jun 9 2008 John Dennis <jdennis@redhat.com> - 2.0.5-1
1839 - upgrade to latest upstream, see Changelog for details,
1840 upstream now has more complete fix for bug #447545, local patch removed
1842 * Wed May 28 2008 John Dennis <jdennis@redhat.com> - 2.0.4-1
1843 - upgrade to latest upstream, see Changelog for details
1844 - resolves: bug #447545: freeradius missing /etc/raddb/sites-available/inner-tunnel
1846 * Fri May 16 2008 <jdennis@redhat.com> - 2.0.3-3
1847 - # Temporary fix for bug #446864, turn off optimization
1849 * Fri Apr 18 2008 John Dennis <jdennis@redhat.com> - 2.0.3-2
1850 - remove support for radrelay, it's different now
1851 - turn off default inclusion of SQL config files in radiusd.conf since SQL
1852 is an optional RPM install
1853 - remove mssql config files
1855 * Thu Apr 17 2008 John Dennis <jdennis@redhat.com> - 2.0.3-1
1856 - Upgrade to current upstream 2.0.3 release
1857 - Many thanks to Enrico Scholz for his spec file suggestions incorporated here
1858 - Resolve: bug #438665: Contains files owned by buildsystem
1859 - Add dialupadmin-mysql, dialupadmin-postgresql, dialupadmin-ldap subpackages
1860 to further partition external dependencies.
1861 - Clean up some unnecessary requires dependencies
1862 - Add versioned requires between subpackages
1864 * Tue Mar 18 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 2.0.2-2
1865 - add Requires for versioned perl (libperl.so)
1867 * Thu Feb 28 2008 <jdennis@redhat.com> - 2.0.2-1
1868 - upgrade to new 2.0 release
1869 - split into subpackages for more fine grained installation
1871 * Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 1.1.7-4.4.ipa
1872 - Autorebuild for GCC 4.3
1874 * Thu Dec 06 2007 Release Engineering <rel-eng at fedoraproject dot org> - 1.1.7-3.4.ipa
1877 * Sat Nov 10 2007 <jdennis@redhat.com> - 1.1.7-3.3.ipa
1878 - add support in rlm_ldap for reading clients from ldap
1879 - fix TLS parameter controling if a cert which fails to validate
1880 will be accepted (i.e. self-signed),
1881 rlm_ldap config parameter=tls_require_cert
1882 ldap LDAP_OPT_X_TLS_REQUIRE_CERT parameter was being passed to
1883 ldap_set_option() when it should have been ldap_int_tls_config()
1885 * Sat Nov 3 2007 <jdennis@redhat.com> - 1.1.7-3.2.ipa
1886 - add support in rlm_ldap for SASL/GSSAPI binds to the LDAP server
1888 * Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3.1
1889 - made init script fully lsb conform
1891 * Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3
1892 - fixed initscript problem (rhbz#292521)
1894 * Tue Aug 28 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-2
1895 - fixed initscript for LSB (rhbz#243671, rhbz#243928)
1898 * Tue Aug 7 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-1
1900 - install snmp MIB files
1901 - dropped LDAP_DEPRECATED flag, it is upstream
1902 - marked config files for sub packages as config (rhbz#240400)
1903 - moved db files to /var/lib/raddb (rhbz#199082)
1905 * Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-2
1906 - radiusd expects /etc/raddb to not be world readable or writable
1907 /etc/raddb now belongs to radiusd, post script sets permissions
1909 * Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-1
1912 * Fri Mar 9 2007 Thomas Woerner <twoerner@redhat.com> 1.1.5-1
1914 - no /etc/raddb/otppasswd.sample anymore
1915 - build is pie by default, dropped pie patch
1916 - fixed build requirement for perl (perl-devel)
1918 * Fri Feb 23 2007 Karsten Hopp <karsten@redhat.com> 1.1.3-3
1919 - remove trailing dot from summary
1921 - fix post/postun/preun requirements
1924 * Fri Dec 8 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2.1
1925 - rebuild for new postgresql library version
1927 * Thu Nov 30 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2
1928 - fixed ldap code to not use internals, added LDAP_DEPRECATED compile time flag
1931 * Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-1
1932 - new version 1.1.3 with lots of upstream bug fixes, some security fixes
1935 * Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-2
1936 - commented out include for sql.conf in radiusd.conf (#202561)
1938 * Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1.1.2-1.1
1941 * Thu Jun 1 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-1
1944 * Wed May 31 2006 Thomas Woerner <twoerner@redhat.com> 1.1.1-1
1946 - fixed incorrect rlm_sql globbing (#189095)
1947 Thanks to Yanko Kaneti for the fix.
1948 - fixed chown syntax in post script (#182777)
1949 - dropped gcc34, libdir and realloc-return patch
1950 - spec file cleanup with additional libtool build fixes
1952 * Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.2
1953 - bump again for double-long bug on ppc(64)
1955 * Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.1
1956 - rebuilt for new gcc4.1 snapshot and glibc changes
1958 * Tue Dec 13 2005 Thomas Woerner <twoerner@redhat.com> 1.0.5-1
1961 * Fri Dec 09 2005 Jesse Keating <jkeating@redhat.com>
1964 * Sat Nov 12 2005 Tom Lane <tgl@redhat.com> - 1.0.4-5
1965 - Rebuild due to mysql update.
1967 * Wed Nov 9 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-4
1968 - rebuilt with new openssl
1969 - fixed ignored return value of realloc
1971 * Fri Sep 30 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-3
1972 - use include instead of pam_stack in pam config
1974 * Wed Jul 20 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-2
1975 - added missing build requires for libtool-ltdl-devel (#160877)
1976 - modified file list to get a report for missing plugins
1978 * Tue Jun 28 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-1
1980 - droppend radrelay patch (fixed upstream)
1982 * Thu Apr 14 2005 Warren Togami <wtogami@redhat.com> 1.0.2-2
1983 - rebuild against new postgresql-libs
1985 * Mon Apr 4 2005 Thomas Woerner <twoerner@redhat.com> 1.0.2-1
1988 * Fri Nov 19 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-3
1989 - rebuild for MySQL 4
1990 - switched over to installed libtool
1992 * Fri Nov 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-2
1993 - Fixed install problem of radeapclient (#138069)
1995 * Wed Oct 6 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-1
1997 - applied radrelay CVS patch from Kevin Bonner
1999 * Wed Aug 25 2004 Warren Togami <wtogami@redhat.com> 1.0.0-3
2000 - BuildRequires pam-devel and libtool
2001 - Fix errant text in description
2002 - Other minor cleanups
2004 * Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2.1
2005 - renamed /etc/pam.d/radius to /etc/pam.d/radiusd to match default
2006 configuration (#130613)
2008 * Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2
2009 - fixed BuildRequires for openssl-devel (#130606)
2011 * Mon Aug 16 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-1
2014 * Mon Jul 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.2
2015 - added buildrequires for zlib-devel (#127162)
2016 - fixed libdir patch to prefer own libeap instead of installed one (#127168)
2017 - fixed samba account maps in LDAP for samba v3 (#127173)
2019 * Thu Jul 1 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.1
2020 - third "pre" release of version 1.0.0
2021 - rlm_ldap is using SASLv2 (#126507)
2023 * Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com>
2026 * Thu Jun 3 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-4.1
2027 - fixed BuildRequires for gdbm-devel
2029 * Tue Mar 30 2004 Harald Hoyer <harald@redhat.com> - 0.9.3-4
2030 - gcc34 compilation fixes
2032 * Tue Mar 02 2004 Elliot Lee <sopwith@redhat.com>
2035 * Tue Feb 24 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-3.2
2036 - added sql scripts for rlm_sql to documentation (#116435)
2038 * Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com>
2041 * Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2.1
2042 - using -fPIC instead of -fpic for s390 ans s390x
2044 * Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2
2045 - radiusd is pie, now
2047 * Tue Nov 25 2003 Thomas Woerner <twoerner@redhat.com> 0.9.3-1
2048 - new version 0.9.3 (bugfix release)
2050 * Fri Nov 7 2003 Thomas Woerner <twoerner@redhat.com> 0.9.2-1
2053 * Mon Sep 29 2003 Thomas Woerner <twoerner@redhat.com> 0.9.1-1
2056 * Mon Sep 22 2003 Nalin Dahyabhai <nalin@redhat.com> 0.9.0-2.2
2057 - modify default PAM configuration to remove the directory part of the module
2058 name, so that 32- and 64-bit libpam (called from 32- or 64-bit radiusd) on
2059 multilib systems will always load the right module for the architecture
2060 - modify default PAM configuration to use pam_stack
2062 * Mon Sep 1 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-2.1
2063 - com_err.h moved to /usr/include/et
2065 * Tue Jul 22 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-1
2068 * Wed Jul 16 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-0.9.0
2069 - new version 0.9.0 pre3
2071 * Thu May 22 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-6
2072 - included directory /var/log/radius/radacct for logrotate
2074 * Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-5
2075 - moved log and run dir to files section, cleaned up post
2077 * Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-4
2078 - added missing run dir in post
2080 * Tue May 20 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-3
2081 - fixed module load patch
2083 * Fri May 16 2003 Thomas Woerner <twoerner@redhat.com>
2084 - removed la files, removed devel package
2085 - split into 4 packages: freeradius, freeradius-mysql, freeradius-postgresql,
2087 - fixed requires and buildrequires
2088 - create logging dir in post if it does not exist
2089 - fixed module load without la files
2091 * Thu Apr 17 2003 Thomas Woerner <twoerner@redhat.com>