1 Summary: High-performance and highly configurable free RADIUS server
5 License: GPLv2+ and LGPLv2+
6 Group: System Environment/Daemons
7 URL: http://www.freeradius.org/
9 # Is elliptic curve cryptography supported?
10 %if 0%{?rhel} >= 7 || 0%{?fedora} >= 20
11 %global HAVE_EC_CRYPTO 1
13 %global HAVE_EC_CRYPTO 0
16 %global dist_base freeradius-server
18 #Source0: ftp://ftp.freeradius.org/pub/radius/%{dist_base}.tar.bz2
19 Source0: %{dist_base}.tar.gz
20 Source100: freeradius-radiusd-init
21 Source102: freeradius-logrotate
22 Source103: freeradius-pam-conf
23 Source104: freeradius-tmpfiles.conf
25 Patch1: freeradius-redhat-config.patch
26 Patch2: freeradius-postgres-sql.patch
28 %global docdir %{?_pkgdocdir}%{!?_pkgdocdir:%{_docdir}/%{name}-%{version}}
29 %define initddir %{?_initddir:%{_initddir}}%{!?_initddir:%{_initrddir}}
31 BuildRequires: autoconf
32 BuildRequires: gdbm-devel
33 BuildRequires: chrpath
34 BuildRequires: openssl
35 BuildRequires: openssl-devel
36 BuildRequires: pam-devel
37 BuildRequires: zlib-devel
38 BuildRequires: net-snmp-devel
39 BuildRequires: net-snmp-utils
40 BuildRequires: readline-devel
41 BuildRequires: libpcap-devel
42 BuildRequires: libtalloc-devel
43 BuildRequires: pcre-devel
46 BuildRequires: libyubikey-devel
47 BuildRequires: tncfhh-devel
48 BuildRequires: ykclient-devel
52 Requires(pre): shadow-utils glibc-common
53 Requires(post): /sbin/chkconfig
54 Requires(preun): /sbin/chkconfig
57 The FreeRADIUS Server Project is a high performance and highly configurable
58 GPL'd free RADIUS server. The server is similar in some respects to
59 Livingston's 2.0 server. While FreeRADIUS started as a variant of the
60 Cistron RADIUS server, they don't share a lot in common any more. It now has
61 many more features than Cistron or Livingston, and is much more configurable.
63 FreeRADIUS is an Internet authentication daemon, which implements the RADIUS
64 protocol, as defined in RFC 2865 (and others). It allows Network Access
65 Servers (NAS boxes) to perform authentication for dial-up users. There are
66 also RADIUS clients available for Web servers, firewalls, Unix logins, and
67 more. Using RADIUS allows authentication and authorization for a network to
68 be centralized, and minimizes the amount of re-configuration which has to be
69 done when adding or deleting new users.
73 Summary: FreeRADIUS documentation
76 All documentation supplied by the FreeRADIUS project is included
80 Group: System Environment/Daemons
81 Summary: FreeRADIUS utilities
82 Requires: %{name} = %{version}-%{release}
83 Requires: libpcap >= 0.9.4
86 The FreeRADIUS server has a number of features found in other servers,
87 and additional features not found in any other server. Rather than
88 doing a feature by feature comparison, we will simply list the features
89 of the server, and let you decide if they satisfy your needs.
91 Support for RFC and VSA Attributes Additional server configuration
92 attributes Selecting a particular configuration Authentication methods
95 Group: System Environment/Daemons
96 Summary: FreeRADIUS development files
97 Requires: %{name} = %{version}-%{release}
100 Development headers and libraries for FreeRADIUS.
103 Summary: LDAP support for freeradius
104 Group: System Environment/Daemons
105 Requires: %{name} = %{version}-%{release}
106 BuildRequires: openldap-devel
109 This plugin provides the LDAP support for the FreeRADIUS server project.
112 Summary: Kerberos 5 support for freeradius
113 Group: System Environment/Daemons
114 Requires: %{name} = %{version}-%{release}
115 BuildRequires: krb5-devel
118 This plugin provides the Kerberos 5 support for the FreeRADIUS server project.
121 Summary: Perl support for freeradius
122 Group: System Environment/Daemons
123 Requires: %{name} = %{version}-%{release}
124 Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version))
125 %{?fedora:BuildRequires: perl-devel}
126 BuildRequires: perl-devel
127 BuildRequires: perl(ExtUtils::Embed)
130 This plugin provides the Perl support for the FreeRADIUS server project.
133 Summary: Python support for freeradius
134 Group: System Environment/Daemons
135 Requires: %{name} = %{version}-%{release}
136 BuildRequires: python-devel
139 This plugin provides the Python support for the FreeRADIUS server project.
142 Summary: MySQL support for freeradius
143 Group: System Environment/Daemons
144 Requires: %{name} = %{version}-%{release}
145 BuildRequires: mysql-devel
148 This plugin provides the MySQL support for the FreeRADIUS server project.
151 Summary: Postgresql support for freeradius
152 Group: System Environment/Daemons
153 Requires: %{name} = %{version}-%{release}
154 BuildRequires: postgresql-devel
156 %description postgresql
157 This plugin provides the postgresql support for the FreeRADIUS server project.
160 Summary: SQLite support for freeradius
161 Group: System Environment/Daemons
162 Requires: %{name} = %{version}-%{release}
163 BuildRequires: sqlite-devel
166 This plugin provides the SQLite support for the FreeRADIUS server project.
169 Summary: Unix ODBC support for freeradius
170 Group: System Environment/Daemons
171 Requires: %{name} = %{version}-%{release}
172 BuildRequires: unixODBC-devel
174 %description unixODBC
175 This plugin provides the unixODBC support for the FreeRADIUS server project.
179 %setup -q -n %{dist_base}
180 # Note: We explicitly do not make patch backup files because 'make install'
181 # mistakenly includes the backup files, especially problematic for raddb config files.
186 # Force compile/link options, extra security for network facing daemon
187 %global _hardened_build 1
190 --libdir=%{_libdir}/freeradius \
193 --with-docdir=%{docdir} \
194 --with-rlm-sql_postgresql-include-dir=/usr/include/pgsql \
195 --with-rlm-sql-postgresql-lib-dir=%{_libdir} \
196 --with-rlm-sql_mysql-include-dir=/usr/include/mysql \
197 --with-mysql-lib-dir=%{_libdir}/mysql \
198 --with-unixodbc-lib-dir=%{_libdir} \
199 --with-rlm-dbm-lib-dir=%{_libdir} \
200 --with-rlm-krb5-include-dir=/usr/kerberos/include \
201 --without-rlm_eap_ikev2 \
202 --without-rlm_sql_iodbc \
203 --without-rlm_sql_firebird \
204 --without-rlm_sql_db2 \
205 --without-rlm_sql_oracle
210 mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/lib/radiusd
211 make install R=$RPM_BUILD_ROOT
214 mkdir -p $RPM_BUILD_ROOT/var/log/radius/radacct
215 touch $RPM_BUILD_ROOT/var/log/radius/{radutmp,radius.log}
217 install -D -m 755 %{SOURCE100} $RPM_BUILD_ROOT/%{initddir}/radiusd
218 install -D -m 644 %{SOURCE102} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/radiusd
219 install -D -m 644 %{SOURCE103} $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/radiusd
221 mkdir -p %{buildroot}%{_sysconfdir}/tmpfiles.d
222 mkdir -p %{buildroot}%{_localstatedir}/run/
223 install -d -m 0710 %{buildroot}%{_localstatedir}/run/radiusd/
224 install -d -m 0700 %{buildroot}%{_localstatedir}/run/radiusd/tmp
225 install -m 0644 %{SOURCE104} %{buildroot}%{_sysconfdir}/tmpfiles.d/radiusd.conf
227 # remove unneeded stuff
228 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.crt
229 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.csr
230 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.der
231 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.key
232 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.pem
233 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.p12
234 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/index.*
235 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/serial*
236 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/dh
237 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/random
239 rm -f $RPM_BUILD_ROOT/%{_mandir}/man1/radeapclient.1
241 rm -f $RPM_BUILD_ROOT/usr/sbin/rc.radiusd
242 rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.a
243 rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.la
245 chrpath --delete $RPM_BUILD_ROOT/%{_libdir}/freeradius/rlm_sql_unixodbc.so
246 chrpath --delete $RPM_BUILD_ROOT/%{_libdir}/freeradius/rlm_sql_postgresql.so
248 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/main/mssql
250 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/ippool/oracle
251 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/ippool-dhcp/oracle
252 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/main/oracle
254 # remove unsupported config files
255 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/experimental.conf
257 # install doc files omitted by standard install
258 for f in COPYRIGHT CREDITS INSTALL.rst README.rst VERSION; do
259 cp $f $RPM_BUILD_ROOT/%{docdir}
261 cp LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.gpl
262 cp src/lib/LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.lgpl
263 cp src/LICENSE.openssl $RPM_BUILD_ROOT/%{docdir}/LICENSE.openssl
265 # add Red Hat specific documentation
266 cat >> $RPM_BUILD_ROOT/%{docdir}/REDHAT << EOF
268 Red Hat, RHEL, Fedora, and CentOS specific information can be found on the
269 FreeRADIUS Wiki in the Red Hat FAQ.
271 http://wiki.freeradius.org/guide/Red-Hat-FAQ
273 Please reference that document.
275 All documentation is in the freeradius-doc sub-package.
280 # Make sure our user/group is present prior to any package or subpackage installation
282 getent group radiusd >/dev/null || /usr/sbin/groupadd -r -g 95 radiusd > /dev/null 2>&1
283 getent passwd radiusd >/dev/null || /usr/sbin/useradd -r -g radiusd -u 95 -c "radiusd user" -d %{_localstatedir}/lib/radiusd -s /sbin/nologin radiusd > /dev/null 2>&1
287 if [ $1 -eq 1 ]; then # install
288 /sbin/chkconfig --add radiusd
289 if [ ! -e /etc/raddb/certs/server.pem ]; then
290 /sbin/runuser -g radiusd -c 'umask 007; /etc/raddb/certs/bootstrap' > /dev/null 2>&1
296 if [ $1 -eq 0 ]; then # uninstall
297 /sbin/service radiusd stop > /dev/null 2>&1
298 /sbin/chkconfig --del radiusd
304 if [ $1 -ge 1 ]; then # upgrade
305 /sbin/service radiusd condrestart >/dev/null 2>&1
307 if [ $1 -eq 0 ]; then # uninstall
308 getent passwd radiusd >/dev/null && /usr/sbin/userdel radiusd > /dev/null 2>&1
309 getent group radiusd >/dev/null && /usr/sbin/groupdel radiusd > /dev/null 2>&1
314 %defattr(-,root,root)
317 %doc %{docdir}/LICENSE.gpl
318 %doc %{docdir}/LICENSE.lgpl
319 %doc %{docdir}/LICENSE.openssl
320 %doc %{docdir}/REDHAT
323 %config(noreplace) %{_sysconfdir}/pam.d/radiusd
324 %config(noreplace) %{_sysconfdir}/logrotate.d/radiusd
326 %config %{_sysconfdir}/tmpfiles.d/radiusd.conf
327 %dir %attr(710,radiusd,radiusd) %{_localstatedir}/run/radiusd
328 %dir %attr(700,radiusd,radiusd) %{_localstatedir}/run/radiusd/tmp
329 %dir %attr(755,radiusd,radiusd) %{_localstatedir}/lib/radiusd
332 %dir %attr(755,root,radiusd) /etc/raddb
333 %defattr(-,root,radiusd)
334 /etc/raddb/README.rst
335 %attr(644,root,radiusd) %config(noreplace) /etc/raddb/dictionary
336 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/clients.conf
338 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/templates.conf
339 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/trigger.conf
341 # symlink: /etc/raddb/hints -> ./mods-config/preprocess/hints
342 %config /etc/raddb/hints
344 # symlink: /etc/raddb/huntgroups -> ./mods-config/preprocess/huntgroups
345 %config /etc/raddb/huntgroups
347 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/proxy.conf
348 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/radiusd.conf
350 # symlink: /etc/raddb/users -> ./mods-config/files/authorize
351 %config(noreplace) /etc/raddb/users
354 %dir %attr(770,root,radiusd) /etc/raddb/certs
355 %config(noreplace) /etc/raddb/certs/Makefile
356 /etc/raddb/certs/README
357 %config(noreplace) /etc/raddb/certs/xpextensions
358 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/certs/*.cnf
359 %attr(750,root,radiusd) /etc/raddb/certs/bootstrap
362 %dir %attr(750,root,radiusd) /etc/raddb/mods-config
363 /etc/raddb/mods-config/README.rst
364 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/attr_filter
365 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/attr_filter/*
366 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/files
367 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/files/*
368 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/preprocess
369 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/preprocess/*
371 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql
372 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter
373 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui
374 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool
375 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool-dhcp
376 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main
380 %dir %attr(750,root,radiusd) /etc/raddb/sites-available
381 /etc/raddb/sites-available/README
382 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/control-socket
383 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/chbind
384 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/decoupled-accounting
385 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/robust-proxy-accounting
386 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/soh
387 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/coa
388 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/example
389 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/inner-tunnel
390 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/dhcp
391 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/check-eap-tls
392 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/status
393 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/dhcp.relay
394 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/virtual.example.com
395 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/originate-coa
396 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/vmps
397 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/default
398 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/proxy-inner-tunnel
399 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/dynamic-clients
400 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/copy-acct-to-home-server
401 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/buffered-sql
402 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/tls
405 # symlink: /etc/raddb/sites-enabled/xxx -> ../sites-available/xxx
406 %dir %attr(750,root,radiusd) /etc/raddb/sites-enabled
407 %config(missingok) /etc/raddb/sites-enabled/inner-tunnel
408 %config(missingok) /etc/raddb/sites-enabled/default
411 %dir %attr(750,root,radiusd) /etc/raddb/mods-available
412 /etc/raddb/mods-available/README.rst
413 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/always
414 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/attr_filter
415 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/cache
416 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/cache_eap
417 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/chap
418 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/counter
419 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/cui
420 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/date
421 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/detail
422 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/detail.example.com
423 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/detail.log
424 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/dhcp
425 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/dhcp_sqlippool
426 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/digest
427 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/dynamic_clients
428 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/eap
429 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/echo
430 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/etc_group
431 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/exec
432 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/expiration
433 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/expr
434 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/files
435 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/idn
436 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/inner-eap
437 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/ippool
438 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/linelog
439 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/logintime
440 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/mac2ip
441 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/mac2vlan
442 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/mschap
443 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/ntlm_auth
444 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/opendirectory
445 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/otp
446 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/pam
447 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/pap
448 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/passwd
449 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/preprocess
450 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/python
451 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/radutmp
452 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/realm
453 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/redis
454 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/rediswho
455 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/replicate
456 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/rest
457 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/smbpasswd
458 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/smsotp
459 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/soh
460 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sometimes
461 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sql
462 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sqlcounter
463 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sqlippool
464 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sradutmp
465 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/unix
466 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/utf8
467 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/wimax
468 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/yubikey
471 # symlink: /etc/raddb/mods-enabled/xxx -> ../mods-available/xxx
472 %dir %attr(750,root,radiusd) /etc/raddb/mods-enabled
473 %config(missingok) /etc/raddb/mods-enabled/always
474 %config(missingok) /etc/raddb/mods-enabled/attr_filter
475 %config(missingok) /etc/raddb/mods-enabled/cache_eap
476 %config(missingok) /etc/raddb/mods-enabled/chap
477 %config(missingok) /etc/raddb/mods-enabled/detail
478 %config(missingok) /etc/raddb/mods-enabled/detail.log
479 %config(missingok) /etc/raddb/mods-enabled/dhcp
480 %config(missingok) /etc/raddb/mods-enabled/digest
481 %config(missingok) /etc/raddb/mods-enabled/dynamic_clients
482 %config(missingok) /etc/raddb/mods-enabled/eap
483 %config(missingok) /etc/raddb/mods-enabled/echo
484 %config(missingok) /etc/raddb/mods-enabled/exec
485 %config(missingok) /etc/raddb/mods-enabled/expiration
486 %config(missingok) /etc/raddb/mods-enabled/expr
487 %config(missingok) /etc/raddb/mods-enabled/files
488 %config(missingok) /etc/raddb/mods-enabled/linelog
489 %config(missingok) /etc/raddb/mods-enabled/logintime
490 %config(missingok) /etc/raddb/mods-enabled/mschap
491 %config(missingok) /etc/raddb/mods-enabled/ntlm_auth
492 %config(missingok) /etc/raddb/mods-enabled/pap
493 %config(missingok) /etc/raddb/mods-enabled/passwd
494 %config(missingok) /etc/raddb/mods-enabled/preprocess
495 %config(missingok) /etc/raddb/mods-enabled/radutmp
496 %config(missingok) /etc/raddb/mods-enabled/realm
497 %config(missingok) /etc/raddb/mods-enabled/replicate
498 %config(missingok) /etc/raddb/mods-enabled/soh
499 %config(missingok) /etc/raddb/mods-enabled/sradutmp
500 %config(missingok) /etc/raddb/mods-enabled/unix
501 %config(missingok) /etc/raddb/mods-enabled/utf8
504 %dir %attr(750,root,radiusd) /etc/raddb/policy.d
505 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/accounting
506 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/canonicalization
507 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/control
508 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/cui
509 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/dhcp
510 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/eap
511 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/filter
512 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/operator-name
516 %defattr(-,root,root)
523 %dir %attr(755,root,root) /usr/share/freeradius
524 /usr/share/freeradius/*
527 %dir %attr(700,radiusd,radiusd) /var/log/radius/
528 %dir %attr(700,radiusd,radiusd) /var/log/radius/radacct/
529 %ghost %attr(644,radiusd,radiusd) /var/log/radius/radutmp
530 %ghost %attr(600,radiusd,radiusd) /var/log/radius/radius.log
533 %attr(755,root,root) %{_libdir}/freeradius/lib*.so*
536 %dir %attr(755,root,root) %{_libdir}/freeradius
537 %{_libdir}/freeradius/proto_dhcp.so
538 %{_libdir}/freeradius/proto_vmps.so
539 %{_libdir}/freeradius/rlm_always.so
540 %{_libdir}/freeradius/rlm_attr_filter.so
541 %{_libdir}/freeradius/rlm_cache.so
542 %{_libdir}/freeradius/rlm_chap.so
543 %{_libdir}/freeradius/rlm_counter.so
544 %{_libdir}/freeradius/rlm_cram.so
545 %{_libdir}/freeradius/rlm_date.so
546 %{_libdir}/freeradius/rlm_detail.so
547 %{_libdir}/freeradius/rlm_dhcp.so
548 %{_libdir}/freeradius/rlm_digest.so
549 %{_libdir}/freeradius/rlm_dynamic_clients.so
550 %{_libdir}/freeradius/rlm_eap.so
551 %{_libdir}/freeradius/rlm_eap_gtc.so
552 %{_libdir}/freeradius/rlm_eap_leap.so
553 %{_libdir}/freeradius/rlm_eap_md5.so
554 %{_libdir}/freeradius/rlm_eap_mschapv2.so
555 %{_libdir}/freeradius/rlm_eap_peap.so
556 %{_libdir}/freeradius/rlm_eap_pwd.so
557 %{_libdir}/freeradius/rlm_eap_sim.so
558 %{_libdir}/freeradius/rlm_eap_tls.so
560 %{_libdir}/freeradius/rlm_eap_tnc.so
562 %{_libdir}/freeradius/rlm_eap_ttls.so
563 %{_libdir}/freeradius/rlm_exec.so
564 %{_libdir}/freeradius/rlm_expiration.so
565 %{_libdir}/freeradius/rlm_expr.so
566 %{_libdir}/freeradius/rlm_files.so
567 %{_libdir}/freeradius/rlm_ippool.so
568 %{_libdir}/freeradius/rlm_linelog.so
569 %{_libdir}/freeradius/rlm_logintime.so
570 %{_libdir}/freeradius/rlm_mschap.so
571 %{_libdir}/freeradius/rlm_otp.so
572 %{_libdir}/freeradius/rlm_pam.so
573 %{_libdir}/freeradius/rlm_pap.so
574 %{_libdir}/freeradius/rlm_passwd.so
575 %{_libdir}/freeradius/rlm_preprocess.so
576 %{_libdir}/freeradius/rlm_radutmp.so
577 %{_libdir}/freeradius/rlm_realm.so
578 %{_libdir}/freeradius/rlm_replicate.so
579 %{_libdir}/freeradius/rlm_soh.so
580 %{_libdir}/freeradius/rlm_sometimes.so
581 %{_libdir}/freeradius/rlm_sql.so
582 %{_libdir}/freeradius/rlm_sqlcounter.so
583 %{_libdir}/freeradius/rlm_sqlippool.so
584 %{_libdir}/freeradius/rlm_sql_null.so
585 %{_libdir}/freeradius/rlm_unix.so
586 %{_libdir}/freeradius/rlm_utf8.so
587 %{_libdir}/freeradius/rlm_wimax.so
588 %{_libdir}/freeradius/rlm_yubikey.so
591 %doc %{_mandir}/man5/clients.conf.5.gz
592 %doc %{_mandir}/man5/dictionary.5.gz
593 %doc %{_mandir}/man5/radiusd.conf.5.gz
594 %doc %{_mandir}/man5/radrelay.conf.5.gz
595 %doc %{_mandir}/man5/rlm_always.5.gz
596 %doc %{_mandir}/man5/rlm_attr_filter.5.gz
597 %doc %{_mandir}/man5/rlm_chap.5.gz
598 %doc %{_mandir}/man5/rlm_counter.5.gz
599 %doc %{_mandir}/man5/rlm_detail.5.gz
600 %doc %{_mandir}/man5/rlm_digest.5.gz
601 %doc %{_mandir}/man5/rlm_expr.5.gz
602 %doc %{_mandir}/man5/rlm_files.5.gz
603 %doc %{_mandir}/man5/rlm_idn.5.gz
604 %doc %{_mandir}/man5/rlm_mschap.5.gz
605 %doc %{_mandir}/man5/rlm_pap.5.gz
606 %doc %{_mandir}/man5/rlm_passwd.5.gz
607 %doc %{_mandir}/man5/rlm_realm.5.gz
608 %doc %{_mandir}/man5/rlm_sql.5.gz
609 %doc %{_mandir}/man5/rlm_unix.5.gz
610 %doc %{_mandir}/man5/unlang.5.gz
611 %doc %{_mandir}/man5/users.5.gz
612 %doc %{_mandir}/man8/raddebug.8.gz
613 %doc %{_mandir}/man8/radiusd.8.gz
614 %doc %{_mandir}/man8/radmin.8.gz
615 %doc %{_mandir}/man8/radconf2xml.8.gz
616 %doc %{_mandir}/man8/radrelay.8.gz
627 %doc %{_mandir}/man1/radclient.1.gz
628 %doc %{_mandir}/man1/radlast.1.gz
629 %doc %{_mandir}/man1/radtest.1.gz
630 %doc %{_mandir}/man1/radwho.1.gz
631 %doc %{_mandir}/man1/radzap.1.gz
632 %doc %{_mandir}/man1/smbencrypt.1.gz
633 %doc %{_mandir}/man5/checkrad.5.gz
634 #%doc %{_mandir}/man8/radconf2xml.8.gz
635 %doc %{_mandir}/man8/radcrypt.8.gz
636 %doc %{_mandir}/man8/radsniff.8.gz
637 %doc %{_mandir}/man8/radsqlrelay.8.gz
638 %doc %{_mandir}/man8/rlm_ippool_tool.8.gz
641 /usr/include/freeradius
644 %{_libdir}/freeradius/rlm_krb5.so
645 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/krb5
648 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/perl
650 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/perl
651 /etc/raddb/mods-config/perl/example.pl
653 %{_libdir}/freeradius/rlm_perl.so
656 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/python
657 /etc/raddb/mods-config/python/example.py*
658 %{_libdir}/freeradius/rlm_python.so
661 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter/mysql
662 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/dailycounter.conf
663 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/expire_on_login.conf
664 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/monthlycounter.conf
665 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/noresetcounter.conf
667 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui/mysql
668 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/mysql/queries.conf
669 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/mysql/schema.sql
671 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool/mysql
672 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/mysql/queries.conf
673 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/mysql/schema.sql
675 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool-dhcp/mysql
676 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool-dhcp/mysql/queries.conf
678 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/mysql
679 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/setup.sql
680 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/queries.conf
681 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/schema.sql
683 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/mysql/extras
684 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/mysql/extras/wimax
685 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/extras/wimax/queries.conf
686 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/extras/wimax/schema.sql
688 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/ndb
689 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/ndb/setup.sql
690 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/ndb/schema.sql
691 /etc/raddb/mods-config/sql/main/ndb/README
693 %{_libdir}/freeradius/rlm_sql_mysql.so
696 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter/postgresql
697 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/dailycounter.conf
698 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/expire_on_login.conf
699 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/monthlycounter.conf
700 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/noresetcounter.conf
702 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui/postgresql
703 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/postgresql/queries.conf
704 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/postgresql/schema.sql
706 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool/postgresql
707 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/postgresql/queries.conf
708 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/postgresql/schema.sql
710 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/postgresql
711 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/setup.sql
712 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/queries.conf
713 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/schema.sql
715 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/postgresql/extras
716 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/extras/update_radacct_group.sql
717 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/extras/voip-postpaid.conf
718 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/extras/cisco_h323_db_schema.sql
720 %{_libdir}/freeradius/rlm_sql_postgresql.so
723 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter/sqlite
724 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/dailycounter.conf
725 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/expire_on_login.conf
726 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/monthlycounter.conf
727 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/noresetcounter.conf
729 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui/sqlite
730 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/sqlite/queries.conf
731 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/sqlite/schema.sql
733 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool/sqlite
734 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/sqlite/queries.conf
735 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/sqlite/schema.sql
737 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool-dhcp/sqlite
738 #%attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool-dhcp/sqlite/schema.sql
739 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool-dhcp/sqlite/queries.conf
741 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/sqlite
742 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/sqlite/queries.conf
743 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/sqlite/schema.sql
745 %{_libdir}/freeradius/rlm_sql_sqlite.so
748 %{_libdir}/freeradius/rlm_ldap.so
749 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/ldap
752 %{_libdir}/freeradius/rlm_sql_unixodbc.so
755 * Fri Mar 21 2014 Stefan Paetow <stefan.paetow@diamond.ac.uk> - 3.0.2-1
756 - Upgrade to upstream 3.0.2 release, full config compatible with 3.0.0.
757 This is a roll-up of all upstream bugs fixes found in 3.0.0-3.0.1
758 See upstream ChangeLog for details (in freeradius-doc subpackage)
760 * Tue Mar 4 2014 Stefan Paetow <stefan.paetow@diamond.ac.uk> - 3.0.1-4
761 - Inclusion of a SQLite 3 patch to unbreak SQLite support in FreeRADIUS 3.0.1
763 * Tue Mar 4 2014 Stefan Paetow <stefan.paetow@diamond.ac.uk> - 3.0.1-4
764 - Backported to CentOS 6.4
766 * Mon Feb 24 2014 Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.1-4
767 - Fix CVE-2014-2015 "freeradius: stack-based buffer overflow flaw in rlm_pap
769 - resolves: bug#1066984 (fedora 1066763)
771 * Fri Feb 21 2014 John Dennis <jdennis@redhat.com> - 3.0.1-3
772 - resolves: bug#1068798 (fedora 1068795)
773 rlm_perl attribute values truncated
775 * Sun Jan 19 2014 John Dennis <jdennis@redhat.com> - 3.0.1-2
776 - resolves: bug#1055073 (fedora 1055072)
777 rlm_ippool; bad config file attribute and fails to send reply attributes
778 - resolves: bug#1055567 (fedora 1056227)
780 - change CFLAGS -imacros to -include to address gcc/gdb bug 1004526
781 where gdb will not display source information, only <command-line>
783 * Tue Jan 14 2014 John Dennis <jdennis@redhat.com> - 3.0.1-1
784 - Upgrade to upstream 3.0.1 release, full config compatible with 3.0.0.
785 This is a roll-up of all upstream bugs fixes found in 3.0.0
786 See upstream ChangeLog for details (in freeradius-doc subpackage)
787 - fixes bugs 1053020 1044747 1048474 1043036
789 * Tue Nov 26 2013 John Dennis <jdennis@redhat.com> - 3.0.0-4
790 - resolves: bug#1031035
791 remove radeapclient man page,
792 upstream no longer supports radeapclient, use eapol_test instead
793 - resolves: bug#1031061
794 rlm_eap_leap memory corruption, see freeradius-rlm_leap.patch
795 - move man pages for utils into utils subpackage from doc subpackage
796 - fix HAVE_EC_CRYPTO test to include f20
797 - add new directory /var/run/radiusd/tmp
798 update mods-available/eap so tls-common.verify.tmpdir to point to it
800 * Wed Nov 13 2013 John Dennis <jdennis@redhat.com> - 3.0.0-3
801 - resolves: bug#1029941
802 PW_TYPE_BOOLEAN config item should be declared int, not bool
804 * Mon Oct 28 2013 John Dennis <jdennis@redhat.com> - 3.0.0-2
805 - resolves: bug#1024119
806 tncfhh-devel is now available in RHEL-7, remove conditional BuildRequires
808 * Sun Oct 13 2013 John Dennis <jdennis@redhat.com> - 3.0.0-1
809 - Offical 3.0 gold release from upstream
810 - resolves: bug#1016873
811 - resolves: bug#891297
813 * Sun Sep 8 2013 John Dennis <jdennis@redhat.com> - 3.0.0-0.4.rc1
814 - upgrade to second 3.0 release candidate rc1
816 * Mon Aug 26 2013 John Dennis <jdennis@redhat.com> - 3.0.0-0.3.rc0
817 - add missingok config attribute to /etc/raddb/sites-enabled/* symlinks
819 * Sat Aug 03 2013 Petr Pisar <ppisar@redhat.com> - 3.0.0-0.2.rc0
822 * Fri Jul 26 2013 Ville Skyttä <ville.skytta@iki.fi> - 3.0.0-0.1.rc0
823 - Install docs to %%{_pkgdocdir} where available.
825 * Mon Jul 22 2013 John Dennis <jdennis@redhat.com> - 3.0.0-0.rc0
826 - Upgrade to new upstream major version release
828 * Wed Jul 17 2013 Petr Pisar <ppisar@redhat.com> - 2.2.0-7
831 * Wed Feb 13 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.2.0-6
832 - Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
834 * Fri Dec 14 2012 John Dennis <jdennis@redhat.com> - 2.2.0-5
835 - resolves: bug#850119 - Introduce new systemd-rpm macros (>= F18)
837 * Thu Dec 13 2012 John Dennis <jdennis@redhat.com> - 2.2.0-4
838 - add compile option -fno-strict-aliasing
840 * Thu Dec 13 2012 John Dennis <jdennis@redhat.com> - 2.2.0-3
841 - specify homedir (/var/lib/radiusd) for radiusd user in useradd,
842 do not permit useradd to default the homedir.
844 * Wed Dec 12 2012 John Dennis <jdennis@redhat.com> - 2.2.0-2
845 - add security options to compiler/linker
847 * Mon Dec 10 2012 John Dennis <jdennis@redhat.com> - 2.2.0-1
848 - resolves: bug#876564 - fails to start without freeradius-mysql
849 - use upstream version of freeradius-exclude-config-file.patch
851 * Wed Oct 3 2012 John Dennis <jdennis@redhat.com> - 2.2.0-0
852 - Add new patch to avoid reading .rpmnew, .rpmsave and other invalid
853 files when loading config files
854 - Upgrade to new 2.2.0 upstream release
855 - Upstream changelog for 2.1.12:
857 * 100% configuration file compatible with 2.1.x.
858 The only fix needed is to disallow "hashsize=0" for rlm_passwd
859 * Update Aruba, Alcatel Lucent, APC, BT, PaloAlto, Pureware,
860 Redback, and Mikrotik dictionaries
861 * Switch to using SHA1 for certificate digests instead of MD5.
862 See raddb/certs/*.cnf
863 * Added copyright statements to the dictionaries, so that we know
864 when people are using them.
865 * Better documentation for radrelay and detail file writer.
866 See raddb/modules/radrelay and raddb/radrelay.conf
867 * Added TLS-Cert-Subject-Alt-Name-Email from patch by Luke Howard
868 * Added -F <file> to radwho
869 * Added query timeouts to MySQL driver. Patch from Brian De Wolf.
870 * Add /etc/default/freeradius to debian package.
871 Patch from Matthew Newton
872 * Finalize DHCP and DHCP relay code. It should now work everywhere.
873 See raddb/sites-available/dhcp, src_ipaddr and src_interface.
874 * DHCP capabilitiies are now compiled in by default.
875 It runs as a DHCP server ONLY when manually enabled.
876 * Added one letter expansions: %G - request minute and %I request
878 * Added script to convert ISC DHCP lease files to SQL pools.
879 See scripts/isc2ippool.pl
880 * Added rlm_cache to cache arbitrary attributes.
881 * Added max_use to rlm_ldap to force connection to be re-established
882 after a given number of queries.
883 * Added configtest option to Debian init scripts, and automatic
884 config test on restart.
885 * Added cache config item to rlm_krb5. When set to "no" ticket
886 caching is disabled which may increase performance.
889 * Fix CVE-2012-3547. All users of 2.1.10, 2.1.11, 2.1.12,
890 and 802.1X should upgrade immediately.
891 * Fix typo in detail file writer, to skip writing if the packet
892 was read from this detail file.
893 * Free cached replies when closing resumed SSL sessions.
894 * Fix a number of issues found by Coverity.
895 * Fix memory leak and race condition in the EAP-TLS session cache.
896 Thanks to Phil Mayers for tracking down OpenSSL APIs.
897 * Restrict ATTRIBUTE names to character sets that make sense.
898 * Fix EAP-TLS session Id length so that OpenSSL doesn't get
900 * Fix SQL IPPool logic for non-timer attributes. Closes bug #181
901 * Change some informational messages to DEBUG rather than error.
902 * Portability fixes for FreeBSD. Closes bug #177
903 * A much better fix for the _lt__PROGRAM__LTX_preloaded_symbols
905 * Safely handle extremely long lines in conf file variable expansion
906 * Fix for Debian bug #606450
907 * Mutex lock around rlm_perl Clone routines. Patch from Eike Dehling
908 * The passwd module no longer permits "hashsize = 0". Setting that
909 is pointless for a host of reasons. It will also break the server.
910 * Fix proxied inner-tunnel packets sometimes having zero authentication
911 vector. Found by Brian Julin.
912 * Added $(EXEEXT) to Makefiles for portability. Closes bug #188.
913 * Fix minor build issue which would cause rlm_eap to be built twice.
914 * When using "status_check=request" for a home server, the username
915 and password must be specified, or the server will not start.
916 * EAP-SIM now calculates keys from the SIM identity, not from the
917 EAP-Identity. Changing the EAP type via NAK may result in
918 identities changing. Bug reported by Microsoft EAP team.
919 * Use home server src_ipaddr when sending Status-Server packets
920 * Decrypt encrypted ERX attributes in CoA packets.
921 * Fix registration of internal xlat's so %{mschap:...} doesn't
922 disappear after a HUP.
923 * Can now reference tagged attributes in expansions.
924 e.g. %{Tunnel-Type:1} and %{Tunnel-Type:1[0]} now work.
925 * Correct calculation of Message-Authenticator for CoA and Disconnect
926 replies. Patch from Jouni Malinen
927 * Install rad_counter, for managing rlm_counter files.
928 * Add unique index constraint to all SQL flavours so that alternate
929 queries work correctly.
930 * The TTLS diameter decoder is now more lenient. It ignores
931 unknown attributes, instead of rejecting the TTLS session.
932 * Use "globfree" in detail file reader. Prevents very slow leak.
934 * Operator =~ shouldn't copy the attribute, like :=. It should
935 instead behave more like ==.
936 * Build main Debian package without SQL dependencies
937 * Use max_queue_size in threading code
938 * Update permissions in raddb/sql/postgresql/admin.sql
939 * Added OpenSSL_add_all_algorithms() to fix issues where OpenSSL
940 wouldn't use methods it knew about.
941 * Add more sanity checks in dynamic_clients code so the server won't
942 crash if it attempts to load a badly formated client definition.
944 * Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.12-10
945 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
947 * Fri Jun 08 2012 Petr Pisar <ppisar@redhat.com> - 2.1.12-9
950 * Tue May 15 2012 John Dennis <jdennis@redhat.com> - 2.1.12-8
951 - resolves: bug#821407 - openssl dependency
953 * Sat Apr 14 2012 John Dennis <jdennis@redhat.com> - 2.1.12-7
954 - resolves: bug#810605 Segfault with freeradius-perl threading
956 * Tue Feb 28 2012 John Dennis <jdennis@redhat.com> - 2.1.12-6
957 Fixing bugs in RHEL6 rebase, applying fixes here as well
958 resolves: bug#700870 freeradius not compiled with --with-udpfromto
959 resolves: bug#753764 shadow password expiration does not work
960 resolves: bug#712803 radtest script is not working with eap-md5 option
961 resolves: bug#690756 errors in raddb/sql/postgresql/admin.sql template
963 * Tue Feb 7 2012 John Dennis <jdennis@redhat.com> - 2.1.12-5
964 - resolves: bug#781877 (from RHEL5) rlm_dbm_parse man page misspelled
965 - resolves: bug#760193 (from RHEL5) radtest PPPhint option is not parsed properly
967 * Sun Jan 15 2012 John Dennis <jdennis@redhat.com> - 2.1.12-4
968 - resolves: bug#781744
969 systemd service file incorrectly listed pid file as
970 /var/run/radiusd/radiusd which it should have been
971 /var/run/radiusd/radiusd.pid
973 * Fri Jan 13 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.12-3
974 - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
976 * Mon Oct 31 2011 John Dennis <jdennis@redhat.com> - 2.1.12-2
977 - rename /etc/tmpfiles.d/freeradius.conf to /etc/tmpfiles.d/radiusd.conf
978 remove config(noreplace) because it must match files section and
979 permissions differ between versions.
980 - fixup macro usage for /var/run & /var/lib
982 * Mon Oct 3 2011 John Dennis <jdennis@redhat.com> - 2.1.12-1
983 - Upgrade to latest upstream release: 2.1.12
984 - Upstream changelog for 2.1.12:
986 * Updates to dictionary.erx, dictionary.siemens, dictionary.starent,
987 dictionary.starent.vsa1, dictionary.zyxel, added dictionary.symbol
988 * Added support for PCRE from Phil Mayers
989 * Configurable file permission in rlm_linelog
990 * Added "relaxed" option to rlm_attr_filter. This copies attributes
991 if at least one match occurred.
992 * Added documentation on dynamic clients.
993 See raddb/modules/dynamic_clients.
994 * Added support for elliptical curve cryptography.
995 See ecdh_curve in raddb/eap.conf.
996 * Added support for 802.1X MIBs in checkrad
997 * Added support for %{rand:...}, which generates a uniformly
998 distributed number between 0 and the number you specify.
999 * Created "man" pages for all installed commands, and documented
1000 options for all commands. Patch from John Dennis.
1001 * Allow radsniff to decode encrypted VSAs and CoA packets.
1002 Patch from Bjorn Mork.
1003 * Always send Message-Authenticator in radtest. Patch from John Dennis.
1004 radclient continues to be more flexible.
1005 * Updated Oracle schema and queries
1006 * Added SecurID module. See src/modules/rlm_securid/README
1009 * Fix memory leak in rlm_detail
1010 * Fix "failed to insert event"
1011 * Allow virtual servers to be reloaded on HUP.
1012 It no longer complains about duplicate virtual servers.
1013 * Fix %{string:...} expansion
1014 * Fix "server closed socket" loop in radmin
1015 * Set ownership of control socket when starting up
1016 * Always allow root to connect to control socket, even if
1017 "uid" is set. They're root. They can already do anything.
1018 * Save all attributes in Access-Accept when proxying inner-tunnel
1020 * Fixes for DHCP relaying.
1021 * Check certificate validity when using OCSP.
1022 * Updated Oracle "configure" script
1023 * Fixed typos in dictionary.alvarion
1024 * WARNING on potential proxy loop.
1025 * Be more aggressive about clearing old requests from the
1027 * Don't open network sockets when using -C
1029 * Wed Sep 21 2011 Tom Callaway <spot@fedoraproject.org> - 2.1.11-7
1030 - restore defattr customization in the main package
1032 * Fri Sep 9 2011 Tom Callaway <spot@fedoraproject.org> - 2.1.11-6
1033 - add missing systemd scriptlets
1035 * Thu Sep 8 2011 Tom Callaway <spot@fedoraproject.org> - 2.1.11-5
1036 - convert to systemd
1038 * Thu Jul 21 2011 Petr Sabata <contyk@redhat.com> - 2.1.11-4
1041 * Wed Jul 20 2011 Petr Sabata <contyk@redhat.com> - 2.1.11-3
1044 * Thu Jun 23 2011 John Dennis <jdennis@redhat.com> - 2.1.11-2
1045 - reload the server (i.e. HUP) after logrotate
1047 * Wed Jun 22 2011 John Dennis <jdennis@redhat.com> - 2.1.11-1
1048 - Upgrade to latest upstream release: 2.1.11
1049 - Remove the following two patches as upstream has incorporated them:
1050 freeradius-radtest-ipv6.patch
1051 freeradius-lt-dladvise.patch
1052 - Upstream changelog for 2.1.11:
1053 Feature improvements
1054 * Added doc/rfc/rfc6158.txt: RADIUS Design Guidelines.
1055 All vendors need to read it and follow its directions.
1056 * Microsoft SoH support for PEAP from Phil Mayers.
1058 * Certificate "bootstrap" script now checks for certificate expiry.
1059 See comments in raddb/eap.conf, and then "make_cert_command".
1060 * Support for dynamic expansion of EAP-GTC challenges.
1061 Patch from Alexander Clouter.
1062 * OCSP support from Alex Bergmann. See raddb/eap.conf, "ocsp"
1064 * Updated dictionary.huawei, dictionary.3gpp, dictionary.3gpp3.
1065 * Added dictionary.eltex, dictionary.motorola, and dictionary.ukerna.
1066 * Experimental redis support from Gabriel Blanchard.
1067 See raddb/modules/redis and raddb/modules/rediswho
1068 * Add "key" to rlm_fastusers. Closes bug #126.
1069 * Added scripts/radtee from original software at
1070 http://horde.net/~jwm/software/misc/comparison-tee
1071 * Updated radmin "man" page for new commands.
1072 * radsniff now prints the hex decoding of the packet (-x -x -x)
1073 * mschap module now reloads its configuration on HUP
1074 * Added experimental "replicate" module. See raddb/modules/replicate
1075 * Policy "foo" can now refer to module "foo". This lets you
1076 over-ride the behavior of a module.
1077 * Policy "foo.authorize" can now over-ride the behavior of module
1078 "foo", "authorize" method.
1079 * Produce errors in more situations when the configuration files
1080 have invalid syntax.
1083 * Ignore pre/post-proxy sections if proxying is disabled
1084 * Add configure checks for pcap_fopen*.
1085 * Fix call to otp_write in rlm_otp
1086 * Fix issue with Access-Challenge checking from 2.1.10, when the
1087 debug flag was set after server startup. Closes #116 and #117.
1088 * Fix typo in zombie period start time.
1089 * Fix leak in src/main/valuepair.c. Patch from James Ballantine.
1090 * Allow radtest to use spaces in shared secret.
1091 Patch from Cedric Carree.
1092 * Remove extra calls to HMAC_CTX_init() in rlm_wimax, fixing leak.
1093 Patch from James Ballantine.
1094 * Remove MN-FA key generation. The NAS does this, not AAA.
1095 Patch from Ben Weichman.
1096 * Include dictionary.mikrotik by default. Closes bug #121.
1097 * Add group membership query to MS-SQL examples. Closes bug #120.
1098 * Don't cast NAS-Port to integer in Postgresql queries.
1100 * Fixes for libtool and autoconf from Sam Hartman.
1101 * radsniff should read the dictionaries in more situations.
1102 * Use fnmatch to check for detail file reader==writer.
1104 * Check for short writes (i.e. disk full) in rlm_detail.
1105 Closes bug #130. Patches and testing from John Morrissey.
1106 * Fix typo in src/lib/token.c. Closes bug #124
1107 * Allow workstation trust accounts to use MS-CHAP.
1109 * Assigning foo=`/bin/echo hello` now produces a syntax error
1110 if it is done outside of an "update" section.
1111 * Fix "too many open file descriptors" problem when using
1112 "verify client" in eap.conf.
1113 * Many fixes to dialup_admin for PHP5, by Stefan Winter.
1114 * Allow preprocess module to have "hints = " and "huntgroups =",
1115 which allows them to be empty or non-existent.
1116 * Renamed "php3" files to "php" in dialup_admin/
1117 * Produce error when sub-TLVs are used in a dictionary. They are
1118 supported only in the "master" branch, and not in 2.1.x.
1119 * Minor fix in dictionary.redback. Closes bug #138.
1120 * Fixed MySQL "NULL" issues in ippool.conf. Closes bug #129.
1121 * Fix to Access-Challenge warning from Ken-ichirou Matsuzawa.
1123 * DHCP fixes to send unicast packets in more situations.
1124 * Fix to udpfromto, to enable it to work on IPv6 networks.
1125 * Fixes to the Oracle accounting_onoff_query.
1126 * When using both IPv4 and IPv6 home servers, ensure that we use the
1127 correct local socket for proxying. Closes bug #143.
1128 * Suppress messages when thread pool is nearly full, all threads
1129 are busy, and we can't create new threads.
1130 * IPv6 is now enabled for udpfromto. Closes bug #141
1131 * Make sqlippool query buffer the same size as sql module.
1133 * Make Coa / Disconnect proxying work again.
1134 * Configure scripts for rlm_caching from Nathaniel McCallum
1135 * src/lib/dhcp.c and src/include/libradius.h are LGPL, not GPL.
1136 * Updated password routines to use time-insensitive comparisons.
1137 This prevents timing attacks (though none are known).
1138 * Allow sqlite module to do normal SELECT queries.
1139 * rlm_wimax now has a configure script
1140 * Moved Ascend, USR, and Motorola "illegal" dictionaries to separate
1141 files. See share/dictionary for explanations.
1142 * Check for duplicate module definitions in the modules{} section,
1143 and refuse to start if duplicates are found.
1144 * Check for duplicate virtual servers, and refuse to start if
1145 duplicates are found.
1146 * Don't use udpfromto if source is INADDR_ANY. Closes bug #148.
1147 * Check pre-conditions before running radmin "inject file".
1148 * Don't over-ride "no match" with "match" for regexes.
1150 * Make retry and error message configurable in mschap.
1151 See raddb/modules/mschap
1152 * Allow EAP-MSCHAPv2 to send error message to client. This change
1153 allows some clients to prompt the user for a new password.
1154 See raddb/eap.conf, mschapv2 section, "send_error".
1155 * Load the default virtual server before any others.
1156 This matches what users expect, and reduces confusion.
1157 * Fix configure checks for udpfromto. Fixes Debian bug #606866
1158 * Definitive fix for bug #35, where the server could crash under
1159 certain loads. Changes src/lib/packet.c to use RB trees.
1160 * Updated "configure" checks to allow IPv6 udpfromto on Linux.
1161 * SQL module now returns NOOP if the accounting start/interim/stop
1162 queries don't do anything.
1163 * Allow %%{outer.control: ... } in string expansions
1164 * home_server coa config now matches raddb/proxy.conf
1165 * Never send a reply to a DHCP Release.
1167 * Thu Jun 16 2011 Marcela Mašláňová <mmaslano@redhat.com> - 2.1.10-8
1170 * Wed Mar 23 2011 John Dennis <jdennis@redhat.com> - 2.1.10-7
1171 - Resolves: #689045 Using rlm_perl cause radiusd failed to start
1172 Fix configure typo which caused lt_dladvise_* functions to be skipped.
1173 run autogen.sh because HAVE_LT_DLADVISE_INIT isn't in src/main/autogen.h
1174 Implemented by: freeradius-lt-dladvise.patch
1176 * Wed Mar 23 2011 John Dennis <jdennis@redhat.com> - 2.1.10-6
1177 - Resolves: #599528 - make radtest IPv6 compatible
1179 * Wed Mar 23 2011 Dan Horák <dan@danny.cz> - 2.1.10-5
1180 - rebuilt for mysql 5.5.10 (soname bump in libmysqlclient)
1182 * Tue Feb 08 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.10-4
1183 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
1185 * Sat Jan 1 2011 John Dennis <jdennis@redhat.com> - 2.1.10-3
1186 - bug 666589 - removing freeradius from system does not delete the user "radiusd"
1187 fix scriptlet argument testing, simplify always exiting with zero
1189 * Thu Dec 30 2010 John Dennis <jdennis@redhat.com> - 2.1.10-2
1190 - rebuild for new MySQL libs
1192 * Tue Oct 19 2010 John Dennis <jdennis@redhat.com> - 2.1.10-1
1193 Feature improvements
1194 * Install the "radcrypt" program.
1195 * Enable radclient to send requests containing MS-CHAPv1
1196 Send packets with: MS-CHAP-Password = "password". It will
1197 be automatically converted to the correct MS-CHAP attributes.
1198 * Added "-t" command-line option to radtest. You can use "-t pap",
1199 "-t chap", "-t mschap", or "-t eap-md5". The default is "-t pap"
1200 * Make the "inner-tunnel" virtual server listen on 127.0.0.1:18120
1201 This change and the previous one makes PEAP testing much easier.
1202 * Added more documentation and examples for the "passwd" module.
1203 * Added dictionaries for RFC 5607 and RFC 5904.
1204 * Added note in proxy.conf that we recommend setting
1205 "require_message_authenticator = yes" for all home servers.
1206 * Added example of second "files" configuration, with documentation.
1207 This shows how and where to use two instances of a module.
1208 * Updated radsniff to have it write pcap files, too. See '-w'.
1209 * Print out large WARNING message if we send an Access-Challenge
1210 for EAP, and receive no follow-up messages from the client.
1211 * Added Cached-Session-Policy for EAP session resumption. See
1213 * Added support for TLS-Cert-* attributes. For details, see
1214 raddb/sites-available/default, "post-auth" section.
1215 * Added sample raddb/modules/{opendirectory,dynamic_clients}
1216 * Updated Cisco and Huawei, HP, Redback, and ERX dictionaries.
1217 * Added RFCs 5607, 5904, and 5997.
1218 * For EAP-TLS, client certificates can now be validated using an
1219 external command. See eap.conf, "validate" subsection of "tls".
1220 * Made rlm_pap aware of {nthash} prefix, for compatibility with
1221 legacy RADIUS systems.
1222 * Add Module-Failure-Message for mschap module (ntlm_auth)
1223 * made rlm_sql_sqlite database configurable. Use "filename"
1225 * Added %%{tolower: ...string ... }, which returns the lowercase
1226 version of the string. Also added %%{toupper: ... } for uppercase.
1229 * Fix endless loop when there are multiple sub-options for
1231 * More debug output when sending / receiving DHCP packets.
1232 * EAP-MSCHAPv2 should return the MPPE keys when used outside
1233 of a TLS tunnel. This is needed for IKE.
1234 * Added SSL "no ticket" option to prevent SSL from creating sessions
1235 without IDs. We need the IDs, so this option should be set.
1236 * Fix proxying of packets from inside a TTLS/PEAP tunnel.
1238 * Allow IPv6 address attributes to be created from domain names
1240 * Set the string length to the correct value when parsing double
1241 quotes. Closes bug #88.
1242 * No longer look users up in /etc/passwd in the default configuration.
1243 This can be reverted by enabling "unix" in the "authorize" section.
1244 * More #ifdef's to enable building on systems without certain
1246 * Fixed SQL-Group comparison to register only if the group
1248 * Fixed SQL-Group comparison to register <instance>-SQL-Group,
1249 just like rlm_ldap. This lets you have multiple SQL group checks.
1250 * Fix scanning of octal numbers in "unlang". Closes bug #89.
1251 * Be less aggressive about freeing "stuck" requests. Closes bug #35.
1252 * Fix example in "originate-coa" to refer to the correct packet.
1253 * Change default timeout for dynamic clients to 1 hour, not 1 day.
1254 * Allow passwd module to map IP addresses, too.
1255 * Allow passwd module to be used for CoA packets
1256 * Put boot filename into DHCP header when DHCP-Boot-Filename
1258 * raddb/certs/Makefile no longer has certs depend on index.txt and
1259 serial. Closes bug #64.
1260 * Ignore NULL errorcode in PostgreSQL client. Closes bug #39
1261 * Made Exec-Program and Exec-Program-Wait work in accounting
1262 section again. See sites-available/default.
1263 * Fix long-standing memory leak in esoteric conditions. Found
1265 * Added "Password-With-Header == userPassword" to raddb/ldap.attrmap
1266 This will automatically convert more passwords.
1267 * Updated rlm_pap to decode Password-With-Header, if it was base64
1268 encoded, and to treat the contents as potentially binary data.
1269 * Fix Novell eDir code to use the right function parameters.
1271 * Allow spaces to be escaped when executing external programs.
1273 * Be less restrictive about checking permissions on control socket.
1274 If we're root, allow connecting to a non-root socket.
1275 * Remove control socket on normal server exit. If the server isn't
1276 running, the control socket should not exist.
1277 * Use MS-CHAP-User-Name as Name field from EAP-MSCHAPv2 for MS-CHAP
1278 calculations. It *MAY* be different (upper / lower case) from
1279 the User-Name attribute. Closes bug #17.
1280 * If the EAP-TLS methods have problems, more SSL errors are now
1281 available in the Module-Failure-Message attribute.
1282 * Update Oracle configure scripts. Closes bug #57.
1283 * Added text to DESC fields of doc/examples/openldap.schema
1284 * Updated more documentation to use "Restructured Text" format.
1285 Thanks to James Lockie.
1286 * Fixed typos in raddb/sql/mssql/dialup.conf. Closes bug #11.
1287 * Return error for potential proxy loops when using "-XC"
1288 * Produce better error messages when slow databases block
1290 * Added notes on DHCP broadcast packets for FreeBSD.
1291 * Fixed crash when parsing some date strings. Closes bug #98
1292 * Improperly formatted Attributes are now printed as "Attr-##".
1293 If they are not correct, they should not use the dictionary name.
1294 * Fix rlm_digest to be check the format of the Digest attributes,
1295 and return "noop" rather than "fail" if they're not right.
1296 * Enable "digest" in raddb/sites-available/default. This change
1297 enables digest authentication to work "out of the box".
1298 * Be less aggressive about marking home servers as zombie.
1299 If they are responding to some packets, they are still alive.
1300 * Added Packet-Transmit-Counter, to track detail file retransmits.
1302 * Added configure check for lt_dladvise_init(). If it exists, then
1303 using it solves some issues related to libraries loading libraries.
1304 * Added indexes to the MySQL IP Pool schema.
1305 * Print WARNING message if too many attributes are put into a packet.
1306 * Include dhcp test client (not built by default)
1307 * Added checks for LDAP constraint violation. Closes bug #18.
1308 * Change default raddebug timeout to 60 seconds.
1309 * Made error / warning messages more consistent.
1310 * Correct back-slash handling in variable expansion. Closes bug #46.
1311 You SHOULD check your configuration for backslash expansion!
1312 * Fix typo in "configure" script (--enable-libltdl-install)
1313 * Use local libltdl in more situations. This helps to avoid
1314 compile issues complaining about lt__PROGRAM__LTX_preloaded_symbols.
1315 * Fix hang on startup when multiple home servers were defined
1316 with "src_ipaddr" field.
1317 * Fix 32/64 bit issue in rlm_ldap. Closes bug #105.
1318 * If the first "listen" section defines 127.0.0.1, don't use that
1319 as a source IP for proxying. It won't work.
1320 * When Proxy-To-Realm is set to a non-existent realm, the EAP module
1321 should handle the request, rather than expecting it to be proxied.
1322 * Fix IPv4 issues with udpfromto. Closes bug #110.
1323 * Clean up child processes of raddebug. Closes bugs #108 and #109
1324 * retry OTP if the OTP daemon fails. Closes bug #58.
1325 * Multiple calls to ber_printf seem to work better. Closes #106.
1326 * Fix "unlang" so that "attribute not found" is treated as a "false"
1327 comparison, rather than a syntax error in the configuration.
1328 * Fix issue with "Group" attribute.
1330 * Sat Jul 31 2010 Orcan Ogetbil <oget[dot]fedora[at]gmail[dot]com> - 2.1.9-3
1331 - Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
1333 * Tue Jun 01 2010 Marcela Maslanova <mmaslano@redhat.com> - 2.1.9-2
1334 - Mass rebuild with perl-5.12.0
1336 * Mon May 24 2010 John Dennis <jdennis@redhat.com> - 2.1.9-1
1337 - update to latest upstream, mainly bug fix release
1338 Feature improvements
1339 * Add radmin command "stats detail <file>" to see what
1340 is going on inside of a detail file reader.
1341 * Added documentation for CoA. See raddb/sites-available/coa
1342 * Add sub-option support for Option 82. See dictionary.dhcp
1343 * Add "server" field to default SQL NAS table, and documented it.
1346 * Reset "received ping" counter for Status-Server checks. In some
1347 corner cases it was not getting reset.
1348 * Handle large VMPS attributes.
1349 * Count accounting responses from a home server in SNMP / statistics
1351 * Set EAP-Session-Resumed = Yes, not "No" when session is resumed.
1352 * radmin packet counter statistics are now unsigned, for numbers
1353 2^31..2^32. After that they roll over to zero.
1354 * Be more careful about expanding data in PAP and MS-CHAP modules.
1355 This prevents login failures when passwords contain '{'.
1356 * Clean up zombie children if there were many "exec" modules being
1357 run for one packet, all with "wait = no".
1358 * re-open log file after HUP. Closes bug #63.
1359 * Fix "no response to proxied packet" complaint for Coa / Disconnect
1360 packets. It shouldn't ignore replies to packets it sent.
1361 * Calculate IPv6 netmasks correctly. Closes bug #69.
1362 * Fix SQL module to re-open sockets if they unexpectedly close.
1363 * Track scope for IPv6 addresses. This lets us use link-local
1364 addresses properly. Closes bug #70.
1365 * Updated Makefiles to no longer use the shell for recursing into
1366 subdirs. "make -j 2" should now work.
1367 * Updated raddb/sql/mysql/ippool.conf to use "= NULL". Closes
1369 * Updated Makefiles so that "make reconfig" no longer uses the shell
1370 for recursing into subdirs, and re-builds all "configure" files.
1371 * Used above method to regenerate all configure scripts.
1373 * Updated SQL module to allow "server" field of "nas" table
1374 to be blank: "". This means the same as it being NULL.
1375 * Fixed regex realm example. Create Realm attribute with value
1376 of realm from User-Name, not from regex. Closes bug #40.
1377 * If processing a DHCP Discover returns "fail / reject", ignore
1378 the packet rather than sending a NAK.
1379 * Allow '%%' to be escaped in sqlcounter module.
1380 * Fix typo internal hash table.
1381 * For PEAP and TTLS, the tunneled reply is added to the reply,
1382 rather than integrated via the operators. This allows multiple
1383 VSAs to be added, where they would previously be discarded.
1384 * Make request number unsigned. This changes nothing other than
1385 the debug output when the server receives more than 2^31 packets.
1386 * Don't block when reading child output in 'exec wait'. This means
1387 that blocked children get killed, instead of blocking the server.
1388 * Enabled building without any proxy functionality
1389 * radclient now prefers IPv4, to match the default server config.
1390 * Print useful error when a realm regex is invalid
1391 * relaxed rules for preprocess module "with_cisco_vsa_hack". The
1392 attributes can now be integer, ipaddr, etc. (i.e. non-string)
1393 * Allow rlm_ldap to build if ldap_set_rebind_proc() has only
1395 * Update configure script for rlm_python to avoid dynamic linking
1396 problems on some platforms.
1397 * Work-around for bug #35
1398 * Do suid to "user" when running in debug mode as root
1399 * Make "allow_core_dumps" work in more situations.
1400 * In detail file reader, treat bad records as EOF.
1401 This allows it to continue working when the disk is full.
1402 * Fix Oracle default accounting queries to work when there are no
1403 gigawords attributes. Other databases already had the fix.
1404 * Fix rlm_sql to show when it opens and closes sockets. It already
1405 says when it cannot connect, so it should say when it can connect.
1406 * "chmod -x" for a few C source files.
1407 * Pull update spec files, etc. from RedHat into the redhat/ directory.
1408 * Allow spaces when parsing integer values. This helps people who
1409 put "too much" into an SQL value field.
1411 * Thu Jan 7 2010 John Dennis <jdennis@redhat.com> - 2.1.8-2
1412 - resolves: bug #526559 initial install should run bootstrap to create certificates
1413 running radiusd in debug mode to generate inital temporary certificates
1414 is no longer necessary, the /etc/raddb/certs/bootstrap is invoked on initial
1415 rpm install (not upgrade) if there is no existing /etc/raddb/certs/server.pem file
1416 - resolves: bug #528493 use sha1 algorithm instead of md5 during cert generation
1417 the certificate configuration (/etc/raddb/certs/{ca,server,client}.cnf) files
1418 were modifed to use sha1 instead of md5 and the validity reduced from 1 year to 2 months
1420 * Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.8-1
1421 - update to latest upstream
1422 Feature improvements
1423 * Print more descriptive error message for too many EAP sessions.
1424 This gives hints on what to do when "failed to store handler"
1425 * Commands received from radmin are now printed on stdout when
1427 * Allow accounting packets to be written to a detail file, even
1428 if they were read from a different detail file.
1429 * Added OpenSSL license exception (src/LICENSE.openssl)
1432 * DHCP sockets can now set the broadcast flag before binding to a
1433 socket. You need to set "broadcast = yes" in the DHCP listener.
1434 * Be more restrictive on string parsing in the config files
1435 * Fix password length in scripts/create-users.pl
1436 * Be more flexible about parsing the detail file. This allows
1437 it to read files where the attributes have been edited.
1438 * Ensure that requests read from the detail file are cleaned up
1439 (i.e. don't leak) if they are proxied without a response.
1440 * Write the PID file after opening sockets, not before
1442 * Proxying large numbers of packets no longer gives error
1443 "unable to open proxy socket".
1444 * Avoid mutex locks in libc after fork
1445 * Retry packet from detail file if there was no response.
1446 * Allow old-style dictionary formats, where the vendor name is the
1447 last field in an ATTRIBUTE definition.
1448 * Removed all recursive use of mutexes. Some systems just don't
1450 * Allow !* to work as documented.
1451 * make templates work (see templates.conf)
1452 * Enabled "allow_core_dumps" to work again
1453 * Print better errors when reading invalid dictionaries
1454 * Sign client certificates with CA, rather than server certs.
1455 * Fix potential crash in rlm_passwd when file was closed
1456 * Fixed corner cases in conditional dynamic expansion.
1457 * Use InnoDB for MySQL IP Pools, to gain transactional support
1458 * Apply patch to libltdl for CVE-2009-3736.
1459 * Fixed a few issues found by LLVM's static checker
1460 * Keep track of "bad authenticators" for accounting packets
1461 * Keep track of "dropped packets" for auth/acct packets
1462 * Synced the "debian" directory with upstream
1463 * Made "unlang" use unsigned 32-bit integers, to match the
1466 * Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.7-7
1467 - Remove devel subpackage. It doesn't make much sense to have a devel package since
1468 we don't ship libraries and it produces multilib conflicts.
1470 * Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-6
1471 - more spec file clean up from review comments
1472 - remove freeradius-libs subpackage, move libfreeradius-eap and
1473 libfreeradius-radius into the main package
1474 - fix subpackage requires, change from freeradius-libs to main package
1475 - fix description of the devel subpackage, remove referene to non-shipped libs
1476 - remove execute permissions on src files included in debuginfo
1477 - remove unnecessary use of ldconfig
1478 - since all sub-packages now require main package remove user creation for sub-packages
1479 - also include the LGPL library license file in addition to the GPL license file
1480 - fix BuildRequires for perl so it's compatible with both Fedora, RHEL5 and RHEL6
1482 * Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-5
1483 - fix various rpmlint issues.
1485 * Fri Dec 4 2009 Stepan Kasal <skasal@redhat.com> - 2.1.7-4
1486 - rebuild against perl 5.10.1
1488 * Thu Dec 3 2009 John Dennis <jdennis@redhat.com> - 2.1.7-3
1489 - resolves: bug #522111 non-conformant initscript
1490 also change permission of /var/run/radiusd from 0700 to 0755
1491 so that "service radiusd status" can be run as non-root
1493 * Wed Sep 16 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.7-2
1494 - use password-auth common PAM configuration instead of system-auth
1496 * Tue Sep 15 2009 John Dennis <jdennis@redhat.com> - 2.1.7-1
1497 - enable building of the rlm_wimax module
1498 - pcap wire analysis support is enabled and available in utils subpackage
1499 - Resolves bug #523053 radtest manpage in wrong package
1500 - update to latest upstream release, from upstream Changelog:
1501 Feature improvements
1502 * Full support for CoA and Disconnect packets as per RFC 3576
1503 and RFC 5176. Both receiving and proxying CoA is supported.
1504 * Added "src_ipaddr" configuration to "home_server". See
1505 proxy.conf for details.
1506 * radsniff now accepts -I, to read from a filename instead of
1508 * radsniff also prints matching requests and any responses to those
1509 requests when '-r' is used.
1510 * Added example of attr_filter for Access-Challenge packets
1511 * Added support for udpfromto in DHCP code
1512 * radmin can now selectively mark modules alive/dead.
1513 See "set module state".
1514 * Added customizable messages on login success/fail.
1515 See msg_goodpass && msg_badpass in log{} section of radiusd.conf
1516 * Document "chase_referrals" and "rebind" in raddb/modules/ldap
1517 * Preliminary implementation of DHCP relay.
1518 * Made thread pool section optional. If it doesn't exist,
1519 the server will run single-threaded.
1520 * Added sample radrelay.conf for people upgrading from 1.x
1521 * Made proxying more stable by failing over, rather than
1522 rejecting the first request. See "response_window" in proxy.conf
1523 * Allow home_server_pools to exist without realms.
1524 * Add dictionary.iea (closes bug #7)
1525 * Added support for RFC 5580
1526 * Added experimental sql_freetds module from Gabriel Blanchard.
1527 * Updated dictionary.foundry
1528 * Added sample configuration for MySQL cluster in raddb/sql/ndb
1529 See the README file for explanations.
1531 * Fixed corner case where proxied packets could have extra
1532 character in User-Password attribute. Fix from Niko Tyni.
1533 * Extended size of "attribute" field in SQL to 64.
1534 * Fixes to ruby module to be more careful about when it builds.
1535 * Updated Perl module "configure" script to check for broken
1537 * Fix "status_check = none". It would still send packets
1539 * Set recursive flag on the proxy mutex, which enables safer
1540 cleanup on some platforms.
1541 * Copy the EAP username verbatim, rather than escaping it.
1542 * Update handling so that robust-proxy-accounting works when
1543 all home servers are down for extended periods of time.
1544 * Look for DHCP option 53 anywhere in the packet, not just
1546 * Fix processing of proxy fail handler with virtual servers.
1547 * DHCP code now prints out correct src/dst IP addresses
1548 when sending packets.
1549 * Removed requirement for DHCP to have clients
1550 * Fixed handling of DHCP packets with message-type buried in the packet
1551 * Fixed corner case with negation in unlang.
1552 * Minor fixes to default MySQL & PostgreSQL schemas
1553 * Suppress MSCHAP complaints in debugging mode.
1554 * Fix SQL module for multiple instance, and possible crash on HUP
1555 * Fix permissions for radius.log for sites that change user/group,
1556 but which don't create the file before starting radiusd.
1557 * Fix double counting of packets when proxying
1559 * Fix pthread keys in rlm_perl
1560 * Log reasons for EAP failure (closes bug #8)
1561 * Load home servers and pools that aren't referenced from a realm.
1562 * Handle return codes from virtual attributes in "unlang"
1563 (e.g. LDAP-Group). This makes "!(expr)" work for them.
1564 * Enable VMPS to see contents of virtual server again
1565 * Fix WiMAX module to be consistent with examples. (closes bug #10)
1566 * Fixed crash with policies dependent on NAS-Port comparisons
1567 * Allowed vendor IDs to be be higher than 32767.
1568 * Fix crash on startup with certain regexes in "hints" file.
1569 * Fix crash in attr_filter module when packets don't exist
1570 * Allow detail file reader to be faster when "load_factor = 100"
1571 * Add work-around for build failures with errors related to
1572 lt__PROGRAM__LTX_preloaded_symbols. libltdl / libtool are horrible.
1573 * Made ldap module "rebind" option aware of older, incompatible
1574 versions of OpenLDAP.
1575 * Check value of Fall-Through in attr_filter module.
1577 * Fri Aug 21 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.6-6
1578 - rebuilt with new openssl
1580 * Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.6-5
1581 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
1583 * Fri Jul 10 2009 John Dennis <jdennis@redhat.com> - 2.1.6-4
1584 - install COPYRIGHT CREDITS INSTALL LICENSE README into docdir
1586 * Tue Jun 23 2009 John Dennis <jdennis@redhat.com> - 2.1.6-3
1587 - resolves bug #507571 freeradius packages do not check for user/group existence
1589 * Tue Jun 2 2009 John Dennis <jdennis@redhat.com> - 2.1.6-2
1590 - make /etc/raddb/sites-available/* be config(noreplace)
1592 * Mon May 18 2009 John Dennis <jdennis@redhat.com> - 2.1.6-1
1593 - update to latest upstream release, from upstream Changelog:
1594 Feature improvements
1595 * radclient exits with 0 on successful (accept / ack), and 1
1596 otherwise (no response / reject)
1597 * Added support for %%{sql:UPDATE ..}, and insert/delete
1598 Patch from Arran Cudbard-Bell
1599 * Added sample "do not respond" policy. See raddb/policy.conf
1600 and raddb/sites-available/do_not_respond
1601 * Cleanups to Suse spec file from Norbert Wegener
1602 * New VSAs for Juniper from Bjorn Mork
1603 * Include more RFC dictionaries in the default install
1604 * More documentation for the WiMAX module
1605 * Added "chase_referrals" and "rebind" configuration to rlm_ldap.
1606 This helps with Active Directory. See raddb/modules/ldap
1607 * Don't load pre/post-proxy if proxying is disabled.
1608 * Added %%{md5:...}, which returns MD5 hash in hex.
1609 * Added configurable "retry_interval" and "poll_interval"
1610 for "detail" listeners.
1611 * Added "delete_mppe_keys" configuration option to rlm_wimax.
1612 Apparently some WiMAX clients misbehave when they see those keys.
1613 * Added experimental rlm_ruby from
1614 http://github.com/Antti/freeradius-server/tree/master
1615 * Add Tunnel attributes to ldap.attrmap
1616 * Enable virtual servers to be reloaded on HUP. For now, only
1617 the "authorize", "authenticate", etc. processing sections are
1618 reloaded. Clients and "listen" sections are NOT reloaded.
1619 * Updated "radwatch" script to be more robust. See scripts/radwatch
1620 * Added certificate compatibility notes in raddb/certs/README,
1621 for compatibility with different operating systems. (i.e. Windows)
1622 * Permit multiple "-e" in radmin.
1623 * Add support for originating CoA-Request and Disconnect-Request.
1624 See raddb/sites-available/originate-coa.
1625 * Added "lifetime" and "max_queries" to raddb/sql.conf.
1626 This helps address the problem of hung SQL sockets.
1627 * Allow packets to be injected via radmin. See "inject help"
1629 * Answer VMPS reconfirmation request. Patch from Hermann Lauer.
1630 * Sample logrotate script in scripts/logrotate.freeradius
1631 * Add configurable poll interval for "detail" listeners
1632 * New "raddebug" command. This prints debugging information from
1633 a running server. See "man raddebug.
1634 * Add "require_message_authenticator" configuration to home_server
1635 configuration. This makes the server add Message-Authenticator
1636 to all outgoing Access-Request packets.
1637 * Added smsotp module, as contributed by Siemens.
1638 * Enabled the administration socket in the default install.
1639 See raddb/sites-available/control-socket, and "man radmin"
1640 * Handle duplicate clients, such as with replicated or
1641 load-balanced SQL servers and "readclients = yes"
1643 * Minor changes to allow building without VQP.
1644 * Minor fixes from John Center
1645 * Fixed raddebug example
1646 * Don't crash when deleting attributes via unlang
1647 * Be friendlier to very fast clients
1648 * Updated the "detail" listener so that it only polls once,
1649 and not many times in a row, leaking memory each time...
1650 * Update comparison for Packet-Src-IP-Address (etc.) so that
1651 the operators other than '==' work.
1652 * Did autoconf magic to work around weird libtool bug
1653 * Make rlm_perl keep tags for tagged attributes in more situations
1654 * Update UID checking for radmin
1655 * Added "include_length" field for TTLS. It's needed for RFC
1656 compliance, but not (apparently) for interoperability.
1657 * Clean up control sockets when they are closed, so that we don't
1659 * Define SUN_LEN for systems that don't have it.
1660 * Correct some boundary conditions in the conditional checker ("if")
1661 in "unlang". Bug noted by Arran Cudbard-Bell.
1662 * Work around minor building issues in gmake. This should only
1663 have affected developers.
1664 * Change how we manage unprivileged user/group, so that we do not
1665 create control sockets owned by root.
1666 * Fixed more minor issues found by Coverity.
1667 * Allow raddb/certs/bootstrap to run when there is no "make"
1669 * In radiusd.conf, run_dir depends on the name of the program,
1670 and isn't hard-coded to "..../radiusd"
1671 * Check for EOF in more places in the "detail" file reader.
1672 * Added Freeswitch dictionary.
1673 * Chop ethernet frames in VMPS, rather than droppping packets.
1674 * Fix EAP-TLS bug. Patch from Arnaud Ebalard
1675 * Don't lose string for regex-compares in the "users" file.
1676 * Expose more functions in rlm_sql to rlm_sqlippool, which
1677 helps on systems where RTLD_GLOBAL is off.
1678 * Fix typos in MySQL schemas for ippools.
1679 * Remove macro that was causing build issues on some platforms.
1680 * Fixed issues with dead home servers. Bug noted by Chris Moules.
1681 * Fixed "access after free" with some dynamic clients.
1683 - fix packaging bug, some directories missing execute permission
1684 /etc/raddb/dictionary now readable by all.
1686 * Tue Feb 24 2009 John Dennis <jdennis@redhat.com> - 2.1.3-4
1687 - fix type usage in unixodbc to match new type usage in unixodbc API
1689 * Thu Feb 19 2009 John Dennis <jdennis@redhat.com> - 2.1.3-3
1690 - add pointer to Red Hat documentation in docdir
1692 * Sat Jan 24 2009 Caolán McNamara <caolanm@redhat.com> - 2.1.3-2
1693 - rebuild for dependencies
1695 * Thu Dec 4 2008 John Dennis <jdennis@redhat.com> - 2.1.3-1
1696 - upgrade to latest upstream release, upstream summary follows:
1697 The focus of this release is stability.
1698 Feature Improvements:
1699 * Allow running with "user=radiusd" and binding to secure sockets.
1700 * Start sending Status-Server "are you alive" messages earlier, which
1701 helps with proxying multiple realms to a home server.
1702 * Removed thread pool code from rlm_perl. It's not necessary.
1703 * Added example Perl configuration to raddb/modules/perl
1704 * Force OpenSSL to support certificates with SHA256. This seems to be
1705 necessary for WiMAX certs.
1707 * Fix Debian patch to allow it to build.
1708 * Fix potential NULL dereference in debugging mode on certain
1709 platforms for TTLS and PEAP inner tunnels.
1710 * Fix uninitialized memory in handling of vendor definitions
1711 * Fix parsing of quoted (but non-string) attributes in the "users" file.
1712 * Initialize uknown NAS IP to 255.255.255.255, rather than 0.0.0.0
1713 * use SUN_LEN in control socket, to avoid truncation on some platforms.
1714 * Correct internal handling of "debug condition" to prevent it from
1716 * Check return code of regcomp in "unlang", so that invalid regular
1717 expressions are caught rather than mishandled.
1718 * Make rlm_sql use <ltdl.h>. Addresses bug #610.
1719 * Document list "type = status" better. Closes bug #580.
1720 * Set "default days" for certificates, because OpenSSL won't do it.
1721 This closes bug #615.
1722 * Reference correct list in example raddb/modules/ldap. Closes #596.
1723 * Increase default schema size for Acct-Session-Id to 64. Closes #540.
1724 * Fix use of temporary files in dialup-admin. Closes #605 and
1725 addresses CVE-2008-4474.
1726 * Addressed a number of minor issues found by Coverity.
1727 * Added DHCP option 150 to the dictionary. Closes #618.
1729 * Wed Dec 3 2008 John Dennis <jdennis@redhat.com> - 2.1.1-8
1730 - add --with-system-libtool to configure as a workaround for
1731 undefined reference to lt__PROGRAM__LTX_preloaded_symbols
1733 * Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
1734 - add obsoletes tag for dialupadmin subpackages which were removed
1736 * Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
1737 - add readline-devel BuildRequires
1739 * Sun Nov 30 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.1.1-4
1740 - Rebuild for Python 2.6
1742 * Fri Nov 21 2008 John Dennis <jdennis@redhat.com> - 2.1.1-3
1743 - make spec file buildable on RHEL5.2 by making perl-devel a fedora only dependency.
1744 - remove diaupadmin packages, it's not well supported and there are problems with it.
1746 * Fri Sep 26 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
1747 - Resolves: bug #464119 bootstrap code could not create initial certs in /etc/raddb/certs because
1748 permissions were 750, radiusd running as euid radiusd could not write there, permissions now 770
1750 * Thu Sep 25 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
1751 - upgrade to new upstream 2.1.1 release
1753 * Wed Jul 30 2008 John Dennis <jdennis@redhat.com> - 2.0.5-2
1754 - Resolves: bug #453761: FreeRADIUS %%post should not include chown -R
1755 specify file attributes for /etc/raddb/ldap.attrmap
1756 fix consistent use of tabs/spaces (rpmlint warning)
1758 * Mon Jun 9 2008 John Dennis <jdennis@redhat.com> - 2.0.5-1
1759 - upgrade to latest upstream, see Changelog for details,
1760 upstream now has more complete fix for bug #447545, local patch removed
1762 * Wed May 28 2008 John Dennis <jdennis@redhat.com> - 2.0.4-1
1763 - upgrade to latest upstream, see Changelog for details
1764 - resolves: bug #447545: freeradius missing /etc/raddb/sites-available/inner-tunnel
1766 * Fri May 16 2008 <jdennis@redhat.com> - 2.0.3-3
1767 - # Temporary fix for bug #446864, turn off optimization
1769 * Fri Apr 18 2008 John Dennis <jdennis@redhat.com> - 2.0.3-2
1770 - remove support for radrelay, it's different now
1771 - turn off default inclusion of SQL config files in radiusd.conf since SQL
1772 is an optional RPM install
1773 - remove mssql config files
1775 * Thu Apr 17 2008 John Dennis <jdennis@redhat.com> - 2.0.3-1
1776 - Upgrade to current upstream 2.0.3 release
1777 - Many thanks to Enrico Scholz for his spec file suggestions incorporated here
1778 - Resolve: bug #438665: Contains files owned by buildsystem
1779 - Add dialupadmin-mysql, dialupadmin-postgresql, dialupadmin-ldap subpackages
1780 to further partition external dependencies.
1781 - Clean up some unnecessary requires dependencies
1782 - Add versioned requires between subpackages
1784 * Tue Mar 18 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 2.0.2-2
1785 - add Requires for versioned perl (libperl.so)
1787 * Thu Feb 28 2008 <jdennis@redhat.com> - 2.0.2-1
1788 - upgrade to new 2.0 release
1789 - split into subpackages for more fine grained installation
1791 * Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 1.1.7-4.4.ipa
1792 - Autorebuild for GCC 4.3
1794 * Thu Dec 06 2007 Release Engineering <rel-eng at fedoraproject dot org> - 1.1.7-3.4.ipa
1797 * Sat Nov 10 2007 <jdennis@redhat.com> - 1.1.7-3.3.ipa
1798 - add support in rlm_ldap for reading clients from ldap
1799 - fix TLS parameter controling if a cert which fails to validate
1800 will be accepted (i.e. self-signed),
1801 rlm_ldap config parameter=tls_require_cert
1802 ldap LDAP_OPT_X_TLS_REQUIRE_CERT parameter was being passed to
1803 ldap_set_option() when it should have been ldap_int_tls_config()
1805 * Sat Nov 3 2007 <jdennis@redhat.com> - 1.1.7-3.2.ipa
1806 - add support in rlm_ldap for SASL/GSSAPI binds to the LDAP server
1808 * Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3.1
1809 - made init script fully lsb conform
1811 * Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3
1812 - fixed initscript problem (rhbz#292521)
1814 * Tue Aug 28 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-2
1815 - fixed initscript for LSB (rhbz#243671, rhbz#243928)
1818 * Tue Aug 7 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-1
1820 - install snmp MIB files
1821 - dropped LDAP_DEPRECATED flag, it is upstream
1822 - marked config files for sub packages as config (rhbz#240400)
1823 - moved db files to /var/lib/raddb (rhbz#199082)
1825 * Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-2
1826 - radiusd expects /etc/raddb to not be world readable or writable
1827 /etc/raddb now belongs to radiusd, post script sets permissions
1829 * Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-1
1832 * Fri Mar 9 2007 Thomas Woerner <twoerner@redhat.com> 1.1.5-1
1834 - no /etc/raddb/otppasswd.sample anymore
1835 - build is pie by default, dropped pie patch
1836 - fixed build requirement for perl (perl-devel)
1838 * Fri Feb 23 2007 Karsten Hopp <karsten@redhat.com> 1.1.3-3
1839 - remove trailing dot from summary
1841 - fix post/postun/preun requirements
1844 * Fri Dec 8 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2.1
1845 - rebuild for new postgresql library version
1847 * Thu Nov 30 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2
1848 - fixed ldap code to not use internals, added LDAP_DEPRECATED compile time flag
1851 * Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-1
1852 - new version 1.1.3 with lots of upstream bug fixes, some security fixes
1855 * Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-2
1856 - commented out include for sql.conf in radiusd.conf (#202561)
1858 * Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1.1.2-1.1
1861 * Thu Jun 1 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-1
1864 * Wed May 31 2006 Thomas Woerner <twoerner@redhat.com> 1.1.1-1
1866 - fixed incorrect rlm_sql globbing (#189095)
1867 Thanks to Yanko Kaneti for the fix.
1868 - fixed chown syntax in post script (#182777)
1869 - dropped gcc34, libdir and realloc-return patch
1870 - spec file cleanup with additional libtool build fixes
1872 * Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.2
1873 - bump again for double-long bug on ppc(64)
1875 * Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.1
1876 - rebuilt for new gcc4.1 snapshot and glibc changes
1878 * Tue Dec 13 2005 Thomas Woerner <twoerner@redhat.com> 1.0.5-1
1881 * Fri Dec 09 2005 Jesse Keating <jkeating@redhat.com>
1884 * Sat Nov 12 2005 Tom Lane <tgl@redhat.com> - 1.0.4-5
1885 - Rebuild due to mysql update.
1887 * Wed Nov 9 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-4
1888 - rebuilt with new openssl
1889 - fixed ignored return value of realloc
1891 * Fri Sep 30 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-3
1892 - use include instead of pam_stack in pam config
1894 * Wed Jul 20 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-2
1895 - added missing build requires for libtool-ltdl-devel (#160877)
1896 - modified file list to get a report for missing plugins
1898 * Tue Jun 28 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-1
1900 - droppend radrelay patch (fixed upstream)
1902 * Thu Apr 14 2005 Warren Togami <wtogami@redhat.com> 1.0.2-2
1903 - rebuild against new postgresql-libs
1905 * Mon Apr 4 2005 Thomas Woerner <twoerner@redhat.com> 1.0.2-1
1908 * Fri Nov 19 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-3
1909 - rebuild for MySQL 4
1910 - switched over to installed libtool
1912 * Fri Nov 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-2
1913 - Fixed install problem of radeapclient (#138069)
1915 * Wed Oct 6 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-1
1917 - applied radrelay CVS patch from Kevin Bonner
1919 * Wed Aug 25 2004 Warren Togami <wtogami@redhat.com> 1.0.0-3
1920 - BuildRequires pam-devel and libtool
1921 - Fix errant text in description
1922 - Other minor cleanups
1924 * Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2.1
1925 - renamed /etc/pam.d/radius to /etc/pam.d/radiusd to match default
1926 configuration (#130613)
1928 * Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2
1929 - fixed BuildRequires for openssl-devel (#130606)
1931 * Mon Aug 16 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-1
1934 * Mon Jul 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.2
1935 - added buildrequires for zlib-devel (#127162)
1936 - fixed libdir patch to prefer own libeap instead of installed one (#127168)
1937 - fixed samba account maps in LDAP for samba v3 (#127173)
1939 * Thu Jul 1 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.1
1940 - third "pre" release of version 1.0.0
1941 - rlm_ldap is using SASLv2 (#126507)
1943 * Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com>
1946 * Thu Jun 3 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-4.1
1947 - fixed BuildRequires for gdbm-devel
1949 * Tue Mar 30 2004 Harald Hoyer <harald@redhat.com> - 0.9.3-4
1950 - gcc34 compilation fixes
1952 * Tue Mar 02 2004 Elliot Lee <sopwith@redhat.com>
1955 * Tue Feb 24 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-3.2
1956 - added sql scripts for rlm_sql to documentation (#116435)
1958 * Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com>
1961 * Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2.1
1962 - using -fPIC instead of -fpic for s390 ans s390x
1964 * Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2
1965 - radiusd is pie, now
1967 * Tue Nov 25 2003 Thomas Woerner <twoerner@redhat.com> 0.9.3-1
1968 - new version 0.9.3 (bugfix release)
1970 * Fri Nov 7 2003 Thomas Woerner <twoerner@redhat.com> 0.9.2-1
1973 * Mon Sep 29 2003 Thomas Woerner <twoerner@redhat.com> 0.9.1-1
1976 * Mon Sep 22 2003 Nalin Dahyabhai <nalin@redhat.com> 0.9.0-2.2
1977 - modify default PAM configuration to remove the directory part of the module
1978 name, so that 32- and 64-bit libpam (called from 32- or 64-bit radiusd) on
1979 multilib systems will always load the right module for the architecture
1980 - modify default PAM configuration to use pam_stack
1982 * Mon Sep 1 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-2.1
1983 - com_err.h moved to /usr/include/et
1985 * Tue Jul 22 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-1
1988 * Wed Jul 16 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-0.9.0
1989 - new version 0.9.0 pre3
1991 * Thu May 22 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-6
1992 - included directory /var/log/radius/radacct for logrotate
1994 * Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-5
1995 - moved log and run dir to files section, cleaned up post
1997 * Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-4
1998 - added missing run dir in post
2000 * Tue May 20 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-3
2001 - fixed module load patch
2003 * Fri May 16 2003 Thomas Woerner <twoerner@redhat.com>
2004 - removed la files, removed devel package
2005 - split into 4 packages: freeradius, freeradius-mysql, freeradius-postgresql,
2007 - fixed requires and buildrequires
2008 - create logging dir in post if it does not exist
2009 - fixed module load without la files
2011 * Thu Apr 17 2003 Thomas Woerner <twoerner@redhat.com>