2 # Configuration for the SQL module, when using MySQL.
4 # The database schema is available at:
6 # src/radiusd/src/modules/rlm_sql/drivers/rlm_sql_mysql/db_mysql.sql
8 # If you are using PostgreSQL, please use 'postgresql.conf', instead.
9 # If you are using MS-SQL, please use 'mssql.conf', instead.
14 # Current supported are: rlm_sql_mysql, rlm_sql_postgresql,
15 # rlm_sql_iodbc, rlm_sql_oracle, rlm_sql_unixodbc, rlm_sql_freetds
16 driver = "rlm_sql_mysql"
23 # Database table configuration
26 # If you want both stop and start records logged to the
27 # same SQL table, leave this as is. If you want them in
28 # different tables, put the start table in acct_table1
29 # and stop table in acct_table2
30 acct_table1 = "radacct"
31 acct_table2 = "radacct"
33 authcheck_table = "radcheck"
34 authreply_table = "radreply"
36 groupcheck_table = "radgroupcheck"
37 groupreply_table = "radgroupreply"
39 usergroup_table = "usergroup"
41 # Remove stale session if checkrad does not see a double login
42 deletestalesessions = yes
44 # Print all SQL statements when in debug mode (-x)
46 sqltracefile = ${logdir}/sqltrace.sql
48 # number of sql connections to make to server
51 # number of seconds to dely retrying on a failed database
52 # connection (per_socket)
53 connect_failure_retry_delay = 60
55 #######################################################################
56 # Query config: Username
57 #######################################################################
58 # This is the username that will get substituted, escaped, and added
59 # as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below
60 # everywhere a username substitution is needed so you you can be sure
61 # the username passed from the client is escaped properly.
63 # Uncomment the next line, if you want the sql_user_name to mean:
65 # Use Stripped-User-Name, if it's there.
66 # Else use User-Name, if it's there,
67 # Else use hard-coded string "none" as the user name.
68 #sql_user_name = "%{Stripped-User-Name:-%{User-Name:-none}}"
70 sql_user_name = "%{User-Name}"
73 #######################################################################
74 # Authorization Queries
75 #######################################################################
76 # These queries compare the check items for the user
77 # in ${authcheck_table} and setup the reply items in
78 # ${authreply_table}. You can use any query/tables
79 # you want, but the return data for each row MUST
80 # be in the following order:
82 # 0. Row ID (currently unused)
83 # 1. UserName/GroupName
86 # 4. Item Attr Operation
87 #######################################################################
88 # Use these for case sensitive usernames. WARNING: Slower queries!
89 # authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM ${authcheck_table} WHERE STRCMP(Username, '%{SQL-User-Name}') = 0 ORDER BY id"
90 # authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM ${authreply_table} WHERE STRCMP(Username, '%{SQL-User-Name}') = 0 ORDER BY id"
92 authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM ${authcheck_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
93 authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM ${authreply_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
95 # Use these for case sensitive usernames. WANRING: Slower queries!
96 # authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.op FROM ${groupcheck_table},${usergroup_table} WHERE STRCMP(${usergroup_table}.Username, '%{SQL-User-Name}') = 0 AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id"
97 # authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.op FROM ${groupreply_table},${usergroup_table} WHERE STRCMP(${usergroup_table}.Username, '%{SQL-User-Name}') = 0 AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id"
99 authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.op FROM ${groupcheck_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id"
100 authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.op FROM ${groupreply_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id"
103 #######################################################################
104 # Authentication Query
105 #######################################################################
106 # This query is used only to get the password for the
107 # user we want to authenticate. The password MUST
108 # be the first field in the return row data.
109 # The 'Password' attribute is deprecated in favor of 'User-Password'.
110 #######################################################################
112 authenticate_query = "SELECT Value,Attribute FROM ${authcheck_table} WHERE UserName = '%{User-Name}' AND ( Attribute = 'User-Password' OR Attribute = 'Password' OR Attribute = 'Crypt-Password' ) ORDER BY Attribute DESC"
114 #######################################################################
116 #######################################################################
117 # accounting_onoff_query - query for Accounting On/Off packets
118 # accounting_update_query - query for Accounting update packets
119 # accounting_start_query - query for Accounting start packets
120 # accounting_start_query_alt - query for Accounting start packets
121 # (alternate in case first query fails)
122 # accounting_stop_query - query for Accounting stop packets
123 # accounting_stop_query_alt - query for Accounting start packets
124 # (alternate in case first query doesn't
125 # affect any existing rows in the table)
126 #######################################################################
127 accounting_onoff_query = "UPDATE ${acct_table1} SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time} WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
129 accounting_update_query = "UPDATE ${acct_table1} SET FramedIPAddress = '%{Framed-IP-Address}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStopTime = 0"
131 accounting_start_query = "INSERT into radacct (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
133 accounting_start_query_alt = "UPDATE ${acct_table1} SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
135 accounting_stop_query = "UPDATE ${acct_table1} SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
137 accounting_stop_query_alt = "INSERT into radacct (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '0', '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
139 #######################################################################
140 # Simultaneous Use Checking Queries
141 #######################################################################
142 # simul_count_query - query for the number of current connections
143 # - If this is not defined, no simultaneouls use checking
144 # - will be performed by this module instance
145 # simul_verify_query - query to return details of current connections for verification
146 # - Leave blank or commented out to disable verification step
147 # - Note that the returned field order should not be changed.
148 # simul_zap_query - query to close "stale" sessions where NAS shows call
149 # - was disconnected, but no stop account packet was received.
150 # - ( %s will be replaced with the appropriate RadAcctId )
151 # - Leave blank or commented out to skip zapping stale sessions
152 #######################################################################
154 # Uncomment simul_count_query to enable simultaneous use checking
155 # simul_count_query = "SELECT COUNT(*) FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
156 simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CalledStationId FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
157 simul_zap_query = "DELETE FROM ${acct_table1} WHERE RadAcctId = '%s'"