1 bob Cleartext-Password := "bob"
2 Tunnel-Password := "hello",
3 Tunnel-Private-Group-Id:1 = "foo",
4 Tunnel-Medium-Type:1 = IP
7 # Please read the documentation file ../doc/processing_users_file,
8 # or 'man 5 users' (after installing the server) for more information.
10 # This file contains authentication security and configuration
11 # information for each user. Accounting requests are NOT processed
12 # through this file. Instead, see 'acct_users', in this directory.
14 # The first field is the user's name and can be up to
15 # 253 characters in length. This is followed (on the same line) with
16 # the list of authentication requirements for that user. This can
17 # include password, comm server name, comm server port number, protocol
18 # type (perhaps set by the "hints" file), and huntgroup name (set by
19 # the "huntgroups" file).
21 # If you are not sure why a particular reply is being sent by the
22 # server, then run the server in debugging mode (radiusd -X), and
23 # you will see which entries in this file are matched.
25 # When an authentication request is received from the comm server,
26 # these values are tested. Only the first match is used unless the
27 # "Fall-Through" variable is set to "Yes".
29 # A special user named "DEFAULT" matches on all usernames.
30 # You can have several DEFAULT entries. All entries are processed
31 # in the order they appear in this file. The first entry that
32 # matches the login-request will stop processing unless you use
33 # the Fall-Through variable.
35 # If you use the database support to turn this file into a .db or .dbm
36 # file, the DEFAULT entries _have_ to be at the end of this file and
37 # you can't have multiple entries for one username.
39 # Indented (with the tab character) lines following the first
40 # line indicate the configuration values to be passed back to
41 # the comm server to allow the initiation of a user session.
42 # This can include things like the PPP configuration values
43 # or the host to log the user onto.
45 # You can include another `users' file with `$INCLUDE users.other'
49 # For a list of RADIUS attributes, and links to their definitions,
52 # http://www.freeradius.org/rfc/attributes.html
56 # Deny access for a specific user. Note that this entry MUST
57 # be before any other 'Auth-Type' attribute which results in the user
58 # being authenticated.
60 # Note that there is NO 'Fall-Through' attribute, so the user will not
61 # be given any additional resources.
63 #lameuser Auth-Type := Reject
64 # Reply-Message = "Your account has been disabled."
67 # Deny access for a group of users.
69 # Note that there is NO 'Fall-Through' attribute, so the user will not
70 # be given any additional resources.
72 #DEFAULT Group == "disabled", Auth-Type := Reject
73 # Reply-Message = "Your account has been disabled."
77 # This is a complete entry for "steve". Note that there is no Fall-Through
78 # entry so that no DEFAULT entry will be used, and the user will NOT
79 # get any attributes in addition to the ones listed here.
81 #steve Cleartext-Password := "testing"
82 # Service-Type = Framed-User,
83 # Framed-Protocol = PPP,
84 # Framed-IP-Address = 172.16.3.33,
85 # Framed-IP-Netmask = 255.255.255.0,
86 # Framed-Routing = Broadcast-Listen,
87 # Framed-Filter-Id = "std.ppp",
89 # Framed-Compression = Van-Jacobsen-TCP-IP
92 # This is an entry for a user with a space in their name.
93 # Note the double quotes surrounding the name.
95 #"John Doe" Cleartext-Password := "hello"
96 # Reply-Message = "Hello, %{User-Name}"
99 # Dial user back and telnet to the default host for that port
101 #Deg Cleartext-Password := "ge55ged"
102 # Service-Type = Callback-Login-User,
103 # Login-IP-Host = 0.0.0.0,
104 # Callback-Number = "9,5551212",
105 # Login-Service = Telnet,
106 # Login-TCP-Port = Telnet
109 # Another complete entry. After the user "dialbk" has logged in, the
110 # connection will be broken and the user will be dialed back after which
111 # he will get a connection to the host "timeshare1".
113 #dialbk Cleartext-Password := "callme"
114 # Service-Type = Callback-Login-User,
115 # Login-IP-Host = timeshare1,
116 # Login-Service = PortMaster,
117 # Callback-Number = "9,1-800-555-1212"
120 # user "swilson" will only get a static IP number if he logs in with
121 # a framed protocol on a terminal server in Alphen (see the huntgroups file).
123 # Note that by setting "Fall-Through", other attributes will be added from
124 # the following DEFAULT entries
126 #swilson Service-Type == Framed-User, Huntgroup-Name == "alphen"
127 # Framed-IP-Address = 192.168.1.65,
131 # If the user logs in as 'username.shell', then authenticate them
132 # using the default method, give them shell access, and stop processing
133 # the rest of the file.
135 #DEFAULT Suffix == ".shell"
136 # Service-Type = Login-User,
137 # Login-Service = Telnet,
138 # Login-IP-Host = your.shell.machine
142 # The rest of this file contains the several DEFAULT entries.
143 # DEFAULT entries match with all login names.
144 # Note that DEFAULT entries can also Fall-Through (see first entry).
145 # A name-value pair from a DEFAULT entry will _NEVER_ override
146 # an already existing name-value pair.
150 # Set up different IP address pools for the terminal servers.
151 # Note that the "+" behind the IP address means that this is the "base"
152 # IP address. The Port-Id (S0, S1 etc) will be added to it.
154 #DEFAULT Service-Type == Framed-User, Huntgroup-Name == "alphen"
155 # Framed-IP-Address = 192.168.1.32+,
158 #DEFAULT Service-Type == Framed-User, Huntgroup-Name == "delft"
159 # Framed-IP-Address = 192.168.2.32+,
163 # Sample defaults for all framed connections.
165 #DEFAULT Service-Type == Framed-User
166 # Framed-IP-Address = 255.255.255.254,
168 # Service-Type = Framed-User,
172 # Default for PPP: dynamic IP address, PPP mode, VJ-compression.
173 # NOTE: we do not use Hint = "PPP", since PPP might also be auto-detected
174 # by the terminal server in which case there may not be a "P" suffix.
175 # The terminal server sends "Framed-Protocol = PPP" for auto PPP.
177 DEFAULT Framed-Protocol == PPP
178 Framed-Protocol = PPP,
179 Framed-Compression = Van-Jacobson-TCP-IP
182 # Default for CSLIP: dynamic IP address, SLIP mode, VJ-compression.
184 DEFAULT Hint == "CSLIP"
185 Framed-Protocol = SLIP,
186 Framed-Compression = Van-Jacobson-TCP-IP
189 # Default for SLIP: dynamic IP address, SLIP mode.
191 DEFAULT Hint == "SLIP"
192 Framed-Protocol = SLIP
195 # Last default: rlogin to our main server.
198 # Service-Type = Login-User,
199 # Login-Service = Rlogin,
200 # Login-IP-Host = shellbox.ispdomain.com
203 # # Last default: shell on the local terminal server.
206 # Service-Type = Administrative-User
208 # On no match, the user is denied access.