Write config.h file at configure-time.

diff --git a/src/modules/rlm_eap/types/rlm_eap_tls/configure b/src/modules/rlm_eap/types/rlm_eap_tls/configure
index cf15eee..76404f7 100755 (executable)
--- a/src/modules/rlm_eap/types/rlm_eap_tls/configure
+++ b/src/modules/rlm_eap/types/rlm_eap_tls/configure
@@ -525,7 +525,7 @@ else
 fi
 
 
-# From configure.in Revision: 1.1 
+# From configure.in Revision: 1.2 
 
 
 fail=
@@ -1072,6 +1072,7 @@ eap_tls_cflags=$SMART_CFLAGS
 
 
 
+
 trap '' 1 2 15
 cat > confcache <<\EOF
 # This file is a shell script that caches the results of configure
@@ -1135,19 +1136,7 @@ fi
 
 trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[    `~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
+DEFS=-DHAVE_CONFIG_H
 
 # Without the "./", some shells look in PATH for config.status.
 : ${CONFIG_STATUS=./config.status}
@@ -1184,7 +1173,7 @@ done
 
 ac_given_srcdir=$srcdir
 
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
 EOF
 cat >> $CONFIG_STATUS <<EOF
 
@@ -1315,6 +1304,113 @@ s%@top_srcdir@%$top_srcdir%g
 fi; done
 rm -f conftest.s*
 
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s%^\([  ]*\)#\([        ]*define[       ][      ]*\)'
+ac_dB='\([     ][      ]*\)[^  ]*%\1#\2'
+ac_dC='\3'
+ac_dD='%g'
+# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+ac_uA='s%^\([  ]*\)#\([        ]*\)undef\([    ][      ]*\)'
+ac_uB='\([     ]\)%\1#\2define\3'
+ac_uC=' '
+ac_uD='\4%g'
+# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_eA='s%^\([  ]*\)#\([        ]*\)undef\([    ][      ]*\)'
+ac_eB='$%\1#\2define\3'
+ac_eC=' '
+ac_eD='%g'
+
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+  CONFIG_HEADERS="config.h"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
+for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  echo creating $ac_file
+
+  rm -f conftest.frag conftest.in conftest.out
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  cat $ac_file_inputs > conftest.in
+
+EOF
+
+# Transform confdefs.h into a sed script conftest.vals that substitutes
+# the proper values into config.h.in to produce config.h.  And first:
+# Protect against being on the right side of a sed subst in config.status.
+# Protect against being in an unquoted here document in config.status.
+rm -f conftest.vals
+cat > conftest.hdr <<\EOF
+s/[\\&%]/\\&/g
+s%[\\$`]%\\&%g
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%ac_d%ac_u%gp
+s%ac_u%ac_e%gp
+EOF
+sed -n -f conftest.hdr confdefs.h > conftest.vals
+rm -f conftest.hdr
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >> conftest.vals <<\EOF
+s%^[   ]*#[    ]*undef[        ][      ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+EOF
+
+# Break up conftest.vals because some shells have a limit on
+# the size of here documents, and old seds have small limits too.
+
+rm -f conftest.tail
+while :
+do
+  ac_lines=`grep -c . conftest.vals`
+  # grep -c gives empty output for an empty file on some AIX systems.
+  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+  # Write a limited-size here document to conftest.frag.
+  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+  echo 'CEOF
+  sed -f conftest.frag conftest.in > conftest.out
+  rm -f conftest.in
+  mv conftest.out conftest.in
+' >> $CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+  rm -f conftest.vals
+  mv conftest.tail conftest.vals
+done
+rm -f conftest.vals
+
+cat >> $CONFIG_STATUS <<\EOF
+  rm -f conftest.frag conftest.h
+  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
+  cat conftest.in >> conftest.h
+  rm -f conftest.in
+  if cmp -s $ac_file conftest.h 2>/dev/null; then
+    echo "$ac_file is unchanged"
+    rm -f conftest.h
+  else
+    # Remove last slash and all that follows it.  Not all systems have dirname.
+      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+      # The file is in a subdirectory.
+      test ! -d "$ac_dir" && mkdir "$ac_dir"
+    fi
+    rm -f $ac_file
+    mv conftest.h $ac_file
+  fi
+fi; done
+
 EOF
 cat >> $CONFIG_STATUS <<EOF
 

diff --git a/src/modules/rlm_eap/types/rlm_eap_tls/configure.in b/src/modules/rlm_eap/types/rlm_eap_tls/configure.in
index dc01979..05e462a 100644 (file)
--- a/src/modules/rlm_eap/types/rlm_eap_tls/configure.in
+++ b/src/modules/rlm_eap/types/rlm_eap_tls/configure.in
@@ -88,4 +88,5 @@ eap_tls_cflags=$SMART_CFLAGS
 AC_SUBST(eap_tls_ldflags)
 AC_SUBST(eap_tls_cflags)
 AC_SUBST(targetname)
+AC_CONFIG_HEADER([config.h])
 AC_OUTPUT(Makefile)