Moved to RST format.

diff --git a/doc/Acct-Type.rst b/doc/Acct-Type.rst
index 9e12d4f..0c8d3ad 100644 (file)
--- a/doc/Acct-Type.rst
+++ b/doc/Acct-Type.rst
@@ -1,3 +1,6 @@
+Acct-Type
+=========
+

 FreeRADIUS supports the Acct-Type attribute to select between
 accounting methods based on arbitrary attribute/value pairs contained
 in an accounting packet. Its use follows the same general configuration
 FreeRADIUS supports the Acct-Type attribute to select between
 accounting methods based on arbitrary attribute/value pairs contained
 in an accounting packet. Its use follows the same general configuration


@@ -17,55 +20,52 @@ addition, there is one RADIUS client sending accounting data that is
 to be logged only to a specific detail file. Everything else should
 use a third SQL instance.
 
 to be logged only to a specific detail file. Everything else should
 use a third SQL instance.
 

-The acct_users file would look something like this:
-
----
-DEFAULT Realm == "foo.com", Acct-Type := "SQLFOO"
+The acct_users file would look something like this::

 
 

-DEFAULT Realm == "bar.com", Acct-Type := "SQLBAR"
+  DEFAULT Realm == "foo.com", Acct-Type := "SQLFOO"
+  
+  DEFAULT Realm == "bar.com", Acct-Type := "SQLBAR"

 
 

-DEFAULT Client-IP-Address == "10.0.0.1", Acct-Type := "OTHERNAS"
----
+  DEFAULT Client-IP-Address == "10.0.0.1", Acct-Type := "OTHERNAS"

 
 

-And in radiusd.conf:
----
-$INCLUDE  ${confdir}/sql0.conf # Instance named 'sql0'.
-$INCLUDE  ${confdir}/sql1.conf # Instance named 'sql1'.
-$INCLUDE  ${confdir}/sql2.conf # Instance named 'sql2'.
+And in radiusd.conf::

 
 

-detail othernas {
+  $INCLUDE  ${confdir}/sql0.conf # Instance named 'sql0'.
+  $INCLUDE  ${confdir}/sql1.conf # Instance named 'sql1'.
+  $INCLUDE  ${confdir}/sql2.conf # Instance named 'sql2'.
+  
+  detail othernas {

         detailfile = ${radacctdir}/10.0.0.1/detail-%Y%m%d
         detailfile = ${radacctdir}/10.0.0.1/detail-%Y%m%d

-}
-
-preacct {
+  }
+  
+  preacct {

         suffix # Add the Realm A/V pair.
         files  # Add the Acct-Type A/V pair based on the Realm A/V pair.
         suffix # Add the Realm A/V pair.
         files  # Add the Acct-Type A/V pair based on the Realm A/V pair.

-}
-
-accounting {
-
+  }
+  
+  accounting {
+  

         # If Acct-Type is SQLFOO use the 'sql1' instance of the SQL module.
         # If Acct-Type is SQLFOO use the 'sql1' instance of the SQL module.

-
+  

         Acct-Type SQLFOO {
                 sql1
         }
         Acct-Type SQLFOO {
                 sql1
         }

-
+  

         # If Acct-Type is SQLBAR, use the 'sql2' instance of the SQL module.
         # If Acct-Type is SQLBAR, use the 'sql2' instance of the SQL module.

-
+  

         Acct-Type SQLBAR {
                 sql2
         }
         Acct-Type SQLBAR {
                 sql2
         }

-
+  

         # If Acct-Type is OTHERNAS, use the 'othernas' instance of the detail
         # module
         # If Acct-Type is OTHERNAS, use the 'othernas' instance of the detail
         # module

-
+  

         Acct-Type OTHERNAS {
                 othernas
         }
         Acct-Type OTHERNAS {
                 othernas
         }

-
+  

         # If we've made it this far, we haven't matched an Acct-Type, so use
         # the sql0 instance.
         # If we've made it this far, we haven't matched an Acct-Type, so use
         # the sql0 instance.

-
+  

         sql0
         sql0

-}
----
+  }

diff --git a/doc/Autz-Type.rst b/doc/Autz-Type.rst
index 6533f73..d880241 100644 (file)
--- a/doc/Autz-Type.rst
+++ b/doc/Autz-Type.rst
@@ -1,3 +1,6 @@
+Autz-Type
+=========
+

 Like Auth-Type for authentication method selection freeradius also
 supports the Autz-Type to select between authorization methods.  The only
 problem is that authorization is the first thing to be called when an
 Like Auth-Type for authentication method selection freeradius also
 supports the Autz-Type to select between authorization methods.  The only
 problem is that authorization is the first thing to be called when an


@@ -5,31 +8,30 @@ authentication request is handled.  As a result we first have to call the
 authorize section without checking for Autz-Type. After that we check for
 Autz-Type and if it exists we call the corresponding subsection in the
 authorize section.  In other words the authorize section in radiusd.conf
 authorize section without checking for Autz-Type. After that we check for
 Autz-Type and if it exists we call the corresponding subsection in the
 authorize section.  In other words the authorize section in radiusd.conf

-should look like this:
-
-
-authorize{
-       suffix
-       preprocess
-       # whatever other authorize modules here
-       Autz-Type Ldap{
-               ldap
-       }
-       Autz-Type SQL{
-               sql
-       }
-       files
-}
+should look like this::
+
+ authorize{
+         suffix
+         preprocess
+         # whatever other authorize modules here
+         Autz-Type Ldap{
+                 ldap
+         }
+         Autz-Type SQL{
+                 sql
+         }
+         files
+ }

 
 What happens is that the first time the authorize section is examined the
 suffix, preprocess and files modules are executed.  If Autz-Type is set
 after that the server core checks for any matching Autz-Type subsection.
 If one is found it is called.  The users file should look something
 
 What happens is that the first time the authorize section is examined the
 suffix, preprocess and files modules are executed.  If Autz-Type is set
 after that the server core checks for any matching Autz-Type subsection.
 If one is found it is called.  The users file should look something

-like this:
+like this::

 
 

-DEFAULT        Called-Station-Id == "123456789", Autz-Type := Ldap
-
-DEFAULT Realm == "other.company.com", Autz-Type := SQL
+  DEFAULT        Called-Station-Id == "123456789", Autz-Type := Ldap
+  
+  DEFAULT Realm == "other.company.com", Autz-Type := SQL

 
 Autz-Type could also be used to select between multiple instances of
 a module (ie sql or ldap) which have been configured differently.  For
 
 Autz-Type could also be used to select between multiple instances of
 a module (ie sql or ldap) which have been configured differently.  For


@@ -38,52 +40,49 @@ different companies) could be queried.  If Auth-Type was also set then we
 could do both Authentication and Authorization with the user databases
 belonging to other companies.  In detail:
 
 could do both Authentication and Authorization with the user databases
 belonging to other companies.  In detail:
 

-radiusd.conf-----------------
-
-authenticate{
-       Auth-Type customer1{
-               ldap1
-       }
-       Auth-Type customer2{
-               ldap2
-       }
-}
-
-authorize{
-       preprocess
-       suffix
-       Autz-Type customer1{
-               ldap1
-       }
-       Autz-Type customer2{
-               ldap2
-       }
-       files
-}
-
------------------------------
-
-users file-------------------
-
-DEFAULT Realm == "customer1", Autz-Type := customer1, Auth-Type := customer1
-
-DEFAULT Realm == "customer2", Autz-Type := customer2, Auth-Type := customer2
+radiusd.conf::
+  
+  authenticate{
+         Auth-Type customer1{
+                 ldap1
+         }
+         Auth-Type customer2{
+                 ldap2
+         }
+  }
+  
+  authorize{
+         preprocess
+         suffix
+         Autz-Type customer1{
+                 ldap1
+         }
+         Autz-Type customer2{
+                 ldap2
+         }
+         files
+  }
+
+The users file::
+
+  DEFAULT Realm == "customer1", Autz-Type := customer1, Auth-Type := customer1
+
+  DEFAULT Realm == "customer2", Autz-Type := customer2, Auth-Type := customer2

 
 

-----------------------------

 
 Apart from Autz-Type the server also supports the use of
 Acct-Type, Session-Type and Post-Auth-Type for the corresponding sections.
 The corresponding section names in the radiusd.conf file are the same.  So for example:
 
 
 Apart from Autz-Type the server also supports the use of
 Acct-Type, Session-Type and Post-Auth-Type for the corresponding sections.
 The corresponding section names in the radiusd.conf file are the same.  So for example:
 

-users file---
+users file::

 
 

-DEFAULT Called-Station-Id == "236473", Session-Type := SQL
+  DEFAULT Called-Station-Id == "236473", Session-Type := SQL

 
 

-radiusd.conf---
+radiusd.conf::

 
 

-session {
-       radutmp
-       Session-Type SQL {
-               sql
-       }
-}
+ session {
+         radutmp
+         Session-Type SQL {
+                 sql
+         }
+ }

diff --git a/doc/CYGWIN.rst b/doc/CYGWIN.rst
index 9fece08..6a15898 100644 (file)
--- a/doc/CYGWIN.rst
+++ b/doc/CYGWIN.rst
@@ -1,3 +1,6 @@
+FreeRADIUS for EAP under CygWin
+===============================
+

 From: "Philip Blow" <philipb@simplywireless.com.au>
 To: <freeradius-users@lists.cistron.nl>
 Date: Wed, 29 Jan 2003 15:23:45 +1100
 From: "Philip Blow" <philipb@simplywireless.com.au>
 To: <freeradius-users@lists.cistron.nl>
 Date: Wed, 29 Jan 2003 15:23:45 +1100


@@ -6,172 +9,275 @@ Here are some brief notes I but together for compiling FreeRADIUS 0.8.1
 on Windows XP with EAP/TLS support.
 
 Configuring FreeRADIUS for EAP under CygWin.
 on Windows XP with EAP/TLS support.
 
 Configuring FreeRADIUS for EAP under CygWin.

+--------------------------------------------
+
+#. Installing CygWin
+
+  Install the latest version of CygWin (at time of writing 1.3.19-1) from http://www.cygwin.com
+
+#. Install the following packages (make as minimum list)
+
+   +--------------------+-----------------+
+   | Package            | Version         |
+   +====================+=================+
+   | _update-info-dir   |        00126-1  |
+   +--------------------+-----------------+
+   | ash                |      20020731-1 |
+   +--------------------+-----------------+
+   | autoconf           |        2.54-1   |
+   +--------------------+-----------------+
+   | autoconf-devel     |        2.57-1   |
+   +--------------------+-----------------+
+   | autoconf-stable    | 2.13-4          |
+   +--------------------+-----------------+
+   | automake           |        1.7.1-1  |
+   +--------------------+-----------------+
+   | automake-devel     |        1.7.2-1  |
+   +--------------------+-----------------+
+   | automake-stable    |        1.4p5-5  |
+   +--------------------+-----------------+
+   | base-files         |        1.1-1    |
+   +--------------------+-----------------+
+   | base-passwd        |        1.0-1    |
+   +--------------------+-----------------+
+   | bash               |        2.05b-8  |
+   +--------------------+-----------------+
+   | bc                 |        1.06-1   |
+   +--------------------+-----------------+
+   | binutils           |      20021117-1 |
+   +--------------------+-----------------+
+   | byacc              |        1.9-1    |
+   +--------------------+-----------------+
+   | bzip2              |        1.0.2-2  |
+   +--------------------+-----------------+
+   | crypt              |        1.0-1    |
+   +--------------------+-----------------+
+   | cygrunsrv          |        0.95-1   |
+   +--------------------+-----------------+
+   | cygutils           |        1.1.3-1  |
+   +--------------------+-----------------+
+   | cygwin             |        1.3.19-1 |
+   +--------------------+-----------------+
+   | cygwin-doc         |        1.3-2    |
+   +--------------------+-----------------+
+   | diff               |        1.0-1    |
+   +--------------------+-----------------+
+   | diffutils          |        2.8.1-1  |
+   +--------------------+-----------------+
+   | ed                 |        0.2-1    |
+   +--------------------+-----------------+
+   | file               |        3.37-1   |
+   +--------------------+-----------------+
+   | fileutils          |        4.1-1    |
+   +--------------------+-----------------+
+   | findutils          |        4.1.7-4  |
+   +--------------------+-----------------+
+   | gawk               |        3.1.1-5  |
+   +--------------------+-----------------+
+   | gcc                |        3.2-3    |
+   +--------------------+-----------------+
+   | gcc-mingw          |      20020817-5 |
+   +--------------------+-----------------+
+   | gcc2               |       2.95.3-10 |
+   +--------------------+-----------------+
+   | gdb                |      20021218-1 |
+   +--------------------+-----------------+
+   | gdbm               |        1.8.0-4  |
+   +--------------------+-----------------+
+   | gettext            |        0.11.5-1 |
+   +--------------------+-----------------+
+   | grep               |        2.5-1    |
+   +--------------------+-----------------+
+   | groff              |        1.18.1-2 |
+   +--------------------+-----------------+
+   | gzip               |        1.3.3-4  |
+   +--------------------+-----------------+
+   | inetutils          |        1.3.2-20 |
+   +--------------------+-----------------+
+   | initscripts        |        0.9-1    |
+   +--------------------+-----------------+
+   | less               |        378-1    |
+   +--------------------+-----------------+
+   | libbz2_0           |        1.0.2-1  |
+   +--------------------+-----------------+
+   | libbz2_1           |        1.0.2-2  |
+   +--------------------+-----------------+
+   | libiconv2          |        1.8-2    |
+   +--------------------+-----------------+
+   | libintl            |     0.10.38-3   |
+   +--------------------+-----------------+
+   | libintl1           |     0.10.40-1   |
+   +--------------------+-----------------+
+   | libintl2           |        0.11.5-1 |
+   +--------------------+-----------------+
+   | libltdl3           |     20030103-1  |
+   +--------------------+-----------------+
+   | libncurses5        |        5.2-1    |
+   +--------------------+-----------------+
+   | libncurses6        |        5.2-8    |
+   +--------------------+-----------------+
+   | libpng10           |        1.0.14-2 |
+   +--------------------+-----------------+
+   | libpng12           |        1.2.4-2  |
+   +--------------------+-----------------+
+   | libpopt0           |        1.6.4-4  |
+   +--------------------+-----------------+
+   | libreadline4       |        4.1-2    |
+   +--------------------+-----------------+
+   | libreadline5       |        4.3-2    |
+   +--------------------+-----------------+
+   | libtool            |     20020202a-1 |
+   +--------------------+-----------------+
+   | libtool-devel      |      20021227-1 |
+   +--------------------+-----------------+
+   | libtool-stable     |        1.4.2-2  |
+   +--------------------+-----------------+
+   | libxml2            |        2.4.23-1 |
+   +--------------------+-----------------+
+   | login              |        1.7-1    |
+   +--------------------+-----------------+
+   | m4                 |        1.4-1    |
+   +--------------------+-----------------+
+   | make               |        3.79.1-7 |
+   +--------------------+-----------------+
+   | man                |        1.5j-1   |
+   +--------------------+-----------------+
+   | mingw-runtime      |        2.3-1    |
+   +--------------------+-----------------+
+   | mktemp             |        1.4-1    |
+   +--------------------+-----------------+
+   | more               |        2.11o-1  |
+   +--------------------+-----------------+
+   | nasm               |      0.98.35-1  |
+   +--------------------+-----------------+
+   | ncurses            |        5.2-8    |
+   +--------------------+-----------------+
+   | newlib-man         |        20020801 |
+   +--------------------+-----------------+
+   | openssh            |        3.5p1-3  |
+   +--------------------+-----------------+
+   | openssl            |        0.9.7-1  |
+   +--------------------+-----------------+
+   | openssl-devel      |        0.9.7-1  |
+   +--------------------+-----------------+
+   | openssl096         |        0.9.6h-1 |
+   +--------------------+-----------------+
+   | patch              |        2.5.8-2  |
+   +--------------------+-----------------+
+   | pcre               |        3.7-1    |
+   +--------------------+-----------------+
+   | perl               |        5.6.1-2  |
+   +--------------------+-----------------+
+   | readline           |        4.3-2    |
+   +--------------------+-----------------+
+   | sed                |        4.0.5-1  |
+   +--------------------+-----------------+
+   | sh-utils           |        2.0.15-3 |
+   +--------------------+-----------------+
+   | sharutils          |         4.2.1-2 |
+   +--------------------+-----------------+
+   | sysvinit           |        2.84-3   |
+   +--------------------+-----------------+
+   | tar                |     1.13.25-1   |
+   +--------------------+-----------------+
+   | tcltk              |     20021218-1  |
+   +--------------------+-----------------+
+   | termcap            |     20020930-1  |
+   +--------------------+-----------------+
+   | terminfo           |        5.2-3    |
+   +--------------------+-----------------+
+   | texinfo            |        4.2-4    |
+   +--------------------+-----------------+
+   | textutils          |        2.0.21-1 |
+   +--------------------+-----------------+
+   | tiff               |        3.5.7-1  |
+   +--------------------+-----------------+
+   | time               |        1.7-1    |
+   +--------------------+-----------------+
+   | unzip              |        5.50-1   |
+   +--------------------+-----------------+
+   | vim                |        6.1-2    |
+   +--------------------+-----------------+
+   | w32api             |        2.1-1    |
+   +--------------------+-----------------+
+   | wget               |        1.8.2-2  |
+   +--------------------+-----------------+
+   | which              |        1.5-1    |
+   +--------------------+-----------------+
+   | xinetd             | 2.3.9-1         |
+   +--------------------+-----------------+
+   | zip                | 2.3-2           |
+   +--------------------+-----------------+
+   | zlib               | 1.1.4-1         |
+   +--------------------+-----------------+
+
+#. Download
+
+   Download the FreeRADIUS source code from http://www.freeradius.org/
+
+#. Expand the FreeRADIUS source file.
+
+#. Make the following changes to the source code
+   (the diffs are reversed)
+
+   ::
+
+    src/main/Makefile.in
+   
+    145,148c145,148
+    <       $(LIBTOOL) --mode=install $(INSTALL) -m 755 $(INSTALLSTRIP)
+    radiusd.exe        $(R)$(sbindir)
+    <       $(INSTALL) -m 755 $(INSTALLSTRIP) radwho.exe
+    $(R)$(bindir)
+    <       $(INSTALL) -m 755 $(INSTALLSTRIP) raduse.exe
+    $(R)$(bindir)
+    <       $(INSTALL) -m 755 $(INSTALLSTRIP) radzap.exe
+    $(R)$(bindir)
+    ---
+    >       $(LIBTOOL) --mode=install $(INSTALL) -m 755 $(INSTALLSTRIP)
+    radiusd        $(R)$(sbindir)
+    >       $(INSTALL) -m 755 $(INSTALLSTRIP) radwho
+    $(R)$(bindir)
+    >       $(INSTALL) -m 755 $(INSTALLSTRIP) raduse
+    $(R)$(bindir)
+    >       $(INSTALL) -m 755 $(INSTALLSTRIP) radzap
+    $(R)$(bindir)
+    150,151c150,151
+    <       $(INSTALL) -m 755    radclient.exe              $(R)$(bindir)
+    <       $(INSTALL) -m 755    radrelay.exe               $(R)$(bindir)
+    ---
+    >       $(INSTALL) -m 755    radclient          $(R)$(bindir)
+    >       $(INSTALL) -m 755    radrelay           $(R)$(bindir)
+
+    src/modules/rlm_dbm/Makefile.in
+  
+    22,23c22,23
+    <       $(INSTALL) -m 755 $(INSTALLSTRIP) rlm_dbm_parser.exe
+    $(R)$(bindir)
+    <       $(INSTALL) -m 755 $(INSTALLSTRIP) rlm_dbm_cat.exe
+    $(R)$(bindir)
+    ---
+    >       $(INSTALL) -m 755 $(INSTALLSTRIP) rlm_dbm_parser $(R)$(bindir)
+    >       $(INSTALL) -m 755 $(INSTALLSTRIP) rlm_dbm_cat    $(R)$(bindir)
+
+    src/modules/rlm_mschap/Makefile
+
+    20c20
+    <       $(INSTALL) -m 755 $(INSTALLSTRIP) smbencrypt.exe $(R)$(bindir)
+    ---
+    >       $(INSTALL) -m 755 $(INSTALLSTRIP) smbencrypt $(R)$(bindir)
+
+#. Run configure with the following command line
+
+   ::
+
+    ./configure -without-snmp -disable-shared -enable-static
+
+#. Execute make and then make install
+
+::

 
 

-1.     Installing CygWin
-
-Install the latest version of CygWin (at time of writing 1.3.19-1) from
-the web download (http://www.cygwin.com).
-
-2.     Install the following packages (make as minimum list)
-
-Package        Version
-_update-info-dir       00126-1
-ash    20020731-1
-autoconf       2.54-1
-autoconf-devel 2.57-1
-autoconf-stable        2.13-4
-automake       1.7.1-1
-automake-devel 1.7.2-1
-automake-stable        1.4p5-5
-base-files     1.1-1
-base-passwd    1.0-1
-bash   2.05b-8
-bc     1.06-1
-binutils       20021117-1
-byacc  1.9-1
-bzip2  1.0.2-2
-crypt  1.0-1
-cygrunsrv      0.95-1
-cygutils       1.1.3-1
-cygwin 1.3.19-1
-cygwin-doc     1.3-2
-diff   1.0-1
-diffutils      2.8.1-1
-ed     0.2-1
-file   3.37-1
-fileutils      4.1-1
-findutils      4.1.7-4
-gawk   3.1.1-5
-gcc    3.2-3
-gcc-mingw      20020817-5
-gcc2   2.95.3-10
-gdb    20021218-1
-gdbm   1.8.0-4
-gettext        0.11.5-1
-grep   2.5-1
-groff  1.18.1-2
-gzip   1.3.3-4
-inetutils      1.3.2-20
-initscripts    0.9-1
-less   378-1
-libbz2_0       1.0.2-1
-libbz2_1       1.0.2-2
-libiconv2      1.8-2
-libintl        0.10.38-3
-libintl1       0.10.40-1
-libintl2       0.11.5-1
-libltdl3       20030103-1
-libncurses5    5.2-1
-libncurses6    5.2-8
-libpng10       1.0.14-2
-libpng12       1.2.4-2
-libpopt0       1.6.4-4
-libreadline4   4.1-2
-libreadline5   4.3-2
-libtool        20020202a-1
-libtool-devel  20021227-1
-libtool-stable 1.4.2-2
-libxml2        2.4.23-1
-login  1.7-1
-m4     1.4-1
-make   3.79.1-7
-man    1.5j-1
-mingw-runtime  2.3-1
-mktemp 1.4-1
-more   2.11o-1
-nasm   0.98.35-1
-ncurses        5.2-8
-newlib-man     20020801
-openssh        3.5p1-3
-openssl        0.9.7-1
-openssl-devel  0.9.7-1
-openssl096     0.9.6h-1
-patch  2.5.8-2
-pcre   3.7-1
-perl   5.6.1-2
-readline       4.3-2
-sed    4.0.5-1
-sh-utils       2.0.15-3
-sharutils      4.2.1-2
-sysvinit       2.84-3
-tar    1.13.25-1
-tcltk  20021218-1
-termcap        20020930-1
-terminfo       5.2-3
-texinfo        4.2-4
-textutils      2.0.21-1
-tiff   3.5.7-1
-time   1.7-1
-unzip  5.50-1
-vim    6.1-2
-w32api 2.1-1
-wget   1.8.2-2
-which  1.5-1
-xinetd 2.3.9-1
-zip    2.3-2
-zlib   1.1.4-1
-
-3.     Download the FreeRADIUS source code form
-http://www.freeradius.org/.
-
-4.     Expand the FreeRADIUS source file.
-
-5.     Make the following changes to the source code
-       (the diffs are reversed)
-
-src/main/Makefile.in
-
-145,148c145,148
-<       $(LIBTOOL) --mode=install $(INSTALL) -m 755 $(INSTALLSTRIP)
-radiusd.exe    $(R)$(sbindir)
-<       $(INSTALL) -m 755 $(INSTALLSTRIP) radwho.exe
-$(R)$(bindir)
-<       $(INSTALL) -m 755 $(INSTALLSTRIP) raduse.exe
-$(R)$(bindir)
-<       $(INSTALL) -m 755 $(INSTALLSTRIP) radzap.exe
-$(R)$(bindir)
----
->       $(LIBTOOL) --mode=install $(INSTALL) -m 755 $(INSTALLSTRIP)
-radiusd        $(R)$(sbindir)
->       $(INSTALL) -m 755 $(INSTALLSTRIP) radwho
-$(R)$(bindir)
->       $(INSTALL) -m 755 $(INSTALLSTRIP) raduse
-$(R)$(bindir)
->       $(INSTALL) -m 755 $(INSTALLSTRIP) radzap
-$(R)$(bindir)
-150,151c150,151
-<       $(INSTALL) -m 755    radclient.exe              $(R)$(bindir)
-<       $(INSTALL) -m 755    radrelay.exe               $(R)$(bindir)
----
->       $(INSTALL) -m 755    radclient          $(R)$(bindir)
->       $(INSTALL) -m 755    radrelay           $(R)$(bindir)
-
-src/modules/rlm_dbm/Makefile.in
-
-22,23c22,23
-<       $(INSTALL) -m 755 $(INSTALLSTRIP) rlm_dbm_parser.exe
-$(R)$(bindir)
-<       $(INSTALL) -m 755 $(INSTALLSTRIP) rlm_dbm_cat.exe
-$(R)$(bindir)
----
->       $(INSTALL) -m 755 $(INSTALLSTRIP) rlm_dbm_parser $(R)$(bindir)
->       $(INSTALL) -m 755 $(INSTALLSTRIP) rlm_dbm_cat    $(R)$(bindir)
-
-src/modules/rlm_mschap/Makefile
-
-20c20
-<       $(INSTALL) -m 755 $(INSTALLSTRIP) smbencrypt.exe $(R)$(bindir)
----
->       $(INSTALL) -m 755 $(INSTALLSTRIP) smbencrypt $(R)$(bindir)
-
-6.     Run configure with the following command line
-
-./configure -without-snmp -disable-shared -enable-static
-
-7.     Execute make and then make install
-
-
-Philip Blow
-Senior Technical Manager
-Simply Wireless
-philipb@simplywireless.com.au
+ Philip Blow
+ Senior Technical Manager
+ Simply Wireless
+ philipb@simplywireless.com.au