2 * hostapd / Initialization and configuration
3 * Copyright (c) 2002-2009, Jouni Malinen <j@w1.fi>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
9 * Alternatively, this software may be distributed under the terms of BSD
12 * See README and COPYING for more details.
15 #include "utils/includes.h"
17 #include "utils/common.h"
18 #include "utils/eloop.h"
19 #include "common/ieee802_11_defs.h"
20 #include "radius/radius_client.h"
24 #include "accounting.h"
28 #include "ieee802_1x.h"
29 #include "ieee802_11_auth.h"
30 #include "vlan_init.h"
32 #include "wps_hostapd.h"
33 #include "hw_features.h"
35 #include "wpa_auth_glue.h"
36 #include "ap_drv_ops.h"
39 static int hostapd_flush_old_stations(struct hostapd_data *hapd);
40 static int hostapd_setup_encryption(char *iface, struct hostapd_data *hapd);
42 extern int wpa_debug_level;
45 int hostapd_reload_config(struct hostapd_iface *iface)
47 struct hostapd_data *hapd = iface->bss[0];
48 struct hostapd_config *newconf, *oldconf;
51 if (iface->config_read_cb == NULL)
53 newconf = iface->config_read_cb(iface->config_fname);
58 * Deauthenticate all stations since the new configuration may not
59 * allow them to use the BSS anymore.
61 for (j = 0; j < iface->num_bss; j++)
62 hostapd_flush_old_stations(iface->bss[j]);
64 #ifndef CONFIG_NO_RADIUS
65 /* TODO: update dynamic data based on changed configuration
66 * items (e.g., open/close sockets, etc.) */
67 radius_client_flush(hapd->radius, 0);
68 #endif /* CONFIG_NO_RADIUS */
70 oldconf = hapd->iconf;
71 hapd->iconf = newconf;
72 hapd->conf = &newconf->bss[0];
73 iface->conf = newconf;
75 if (hostapd_setup_wpa_psk(hapd->conf)) {
76 wpa_printf(MSG_ERROR, "Failed to re-configure WPA PSK "
77 "after reloading configuration");
80 if (hapd->conf->wpa && hapd->wpa_auth == NULL)
81 hostapd_setup_wpa(hapd);
82 else if (hapd->conf->wpa)
83 hostapd_reconfig_wpa(hapd);
84 else if (hapd->wpa_auth) {
85 wpa_deinit(hapd->wpa_auth);
86 hapd->wpa_auth = NULL;
87 hostapd_set_privacy(hapd, 0);
88 hostapd_setup_encryption(hapd->conf->iface, hapd);
91 ieee802_11_set_beacon(hapd);
93 if (hapd->conf->ssid.ssid_set &&
94 hostapd_set_ssid(hapd, (u8 *) hapd->conf->ssid.ssid,
95 hapd->conf->ssid.ssid_len)) {
96 wpa_printf(MSG_ERROR, "Could not set SSID for kernel driver");
100 if (hapd->conf->ieee802_1x || hapd->conf->wpa)
101 hapd->drv.set_drv_ieee8021x(hapd, hapd->conf->iface, 1);
103 hapd->drv.set_drv_ieee8021x(hapd, hapd->conf->iface, 0);
105 hostapd_config_free(oldconf);
107 wpa_printf(MSG_DEBUG, "Reconfigured interface %s", hapd->conf->iface);
113 static void hostapd_broadcast_key_clear_iface(struct hostapd_data *hapd,
118 for (i = 0; i < NUM_WEP_KEYS; i++) {
119 if (hapd->drv.set_key(ifname, hapd, WPA_ALG_NONE, NULL, i,
120 i == 0 ? 1 : 0, NULL, 0, NULL, 0)) {
121 wpa_printf(MSG_DEBUG, "Failed to clear default "
122 "encryption keys (ifname=%s keyidx=%d)",
126 #ifdef CONFIG_IEEE80211W
127 if (hapd->conf->ieee80211w) {
128 for (i = NUM_WEP_KEYS; i < NUM_WEP_KEYS + 2; i++) {
129 if (hapd->drv.set_key(ifname, hapd, WPA_ALG_NONE, NULL,
130 i, i == 0 ? 1 : 0, NULL, 0,
132 wpa_printf(MSG_DEBUG, "Failed to clear "
133 "default mgmt encryption keys "
134 "(ifname=%s keyidx=%d)", ifname, i);
138 #endif /* CONFIG_IEEE80211W */
142 static int hostapd_broadcast_wep_clear(struct hostapd_data *hapd)
144 hostapd_broadcast_key_clear_iface(hapd, hapd->conf->iface);
149 static int hostapd_broadcast_wep_set(struct hostapd_data *hapd)
152 struct hostapd_ssid *ssid = &hapd->conf->ssid;
155 if (ssid->wep.default_len &&
156 hapd->drv.set_key(hapd->conf->iface,
157 hapd, WPA_ALG_WEP, NULL, idx,
158 idx == ssid->wep.idx,
159 NULL, 0, ssid->wep.key[idx],
160 ssid->wep.len[idx])) {
161 wpa_printf(MSG_WARNING, "Could not set WEP encryption.");
165 if (ssid->dyn_vlan_keys) {
167 for (i = 0; i <= ssid->max_dyn_vlan_keys; i++) {
169 struct hostapd_wep_keys *key = ssid->dyn_vlan_keys[i];
172 ifname = hostapd_get_vlan_id_ifname(hapd->conf->vlan,
178 if (hapd->drv.set_key(ifname, hapd, WPA_ALG_WEP, NULL,
179 idx, idx == key->idx, NULL, 0,
180 key->key[idx], key->len[idx])) {
181 wpa_printf(MSG_WARNING, "Could not set "
182 "dynamic VLAN WEP encryption.");
192 * hostapd_cleanup - Per-BSS cleanup (deinitialization)
193 * @hapd: Pointer to BSS data
195 * This function is used to free all per-BSS data structures and resources.
196 * This gets called in a loop for each BSS between calls to
197 * hostapd_cleanup_iface_pre() and hostapd_cleanup_iface() when an interface
198 * is deinitialized. Most of the modules that are initialized in
199 * hostapd_setup_bss() are deinitialized here.
201 static void hostapd_cleanup(struct hostapd_data *hapd)
203 if (hapd->iface->ctrl_iface_deinit)
204 hapd->iface->ctrl_iface_deinit(hapd);
206 iapp_deinit(hapd->iapp);
208 accounting_deinit(hapd);
209 hostapd_deinit_wpa(hapd);
211 hostapd_acl_deinit(hapd);
212 #ifndef CONFIG_NO_RADIUS
213 radius_client_deinit(hapd->radius);
215 #endif /* CONFIG_NO_RADIUS */
217 hostapd_deinit_wps(hapd);
219 authsrv_deinit(hapd);
221 if (hapd->interface_added &&
222 hostapd_if_remove(hapd, WPA_IF_AP_BSS, hapd->conf->iface)) {
223 wpa_printf(MSG_WARNING, "Failed to remove BSS interface %s",
227 os_free(hapd->probereq_cb);
228 hapd->probereq_cb = NULL;
233 * hostapd_cleanup_iface_pre - Preliminary per-interface cleanup
234 * @iface: Pointer to interface data
236 * This function is called before per-BSS data structures are deinitialized
237 * with hostapd_cleanup().
239 static void hostapd_cleanup_iface_pre(struct hostapd_iface *iface)
245 * hostapd_cleanup_iface - Complete per-interface cleanup
246 * @iface: Pointer to interface data
248 * This function is called after per-BSS data structures are deinitialized
249 * with hostapd_cleanup().
251 static void hostapd_cleanup_iface(struct hostapd_iface *iface)
253 hostapd_free_hw_features(iface->hw_features, iface->num_hw_features);
254 iface->hw_features = NULL;
255 os_free(iface->current_rates);
256 iface->current_rates = NULL;
257 ap_list_deinit(iface);
258 hostapd_config_free(iface->conf);
261 os_free(iface->config_fname);
267 static int hostapd_setup_encryption(char *iface, struct hostapd_data *hapd)
271 hostapd_broadcast_wep_set(hapd);
273 if (hapd->conf->ssid.wep.default_len) {
274 hostapd_set_privacy(hapd, 1);
278 for (i = 0; i < 4; i++) {
279 if (hapd->conf->ssid.wep.key[i] &&
280 hapd->drv.set_key(iface, hapd, WPA_ALG_WEP, NULL, i,
281 i == hapd->conf->ssid.wep.idx, NULL, 0,
282 hapd->conf->ssid.wep.key[i],
283 hapd->conf->ssid.wep.len[i])) {
284 wpa_printf(MSG_WARNING, "Could not set WEP "
288 if (hapd->conf->ssid.wep.key[i] &&
289 i == hapd->conf->ssid.wep.idx)
290 hostapd_set_privacy(hapd, 1);
297 static int hostapd_flush_old_stations(struct hostapd_data *hapd)
301 if (hostapd_drv_none(hapd))
304 wpa_printf(MSG_DEBUG, "Flushing old station entries");
305 if (hostapd_flush(hapd)) {
306 wpa_printf(MSG_WARNING, "Could not connect to kernel driver.");
309 wpa_printf(MSG_DEBUG, "Deauthenticate all stations");
311 /* New Prism2.5/3 STA firmware versions seem to have issues with this
312 * broadcast deauth frame. This gets the firmware in odd state where
313 * nothing works correctly, so let's skip sending this for the hostap
315 if (hapd->driver && os_strcmp(hapd->driver->name, "hostap") != 0) {
317 os_memset(addr, 0xff, ETH_ALEN);
318 hapd->drv.sta_deauth(hapd, addr,
319 WLAN_REASON_PREV_AUTH_NOT_VALID);
327 * hostapd_validate_bssid_configuration - Validate BSSID configuration
328 * @iface: Pointer to interface data
329 * Returns: 0 on success, -1 on failure
331 * This function is used to validate that the configured BSSIDs are valid.
333 static int hostapd_validate_bssid_configuration(struct hostapd_iface *iface)
335 u8 mask[ETH_ALEN] = { 0 };
336 struct hostapd_data *hapd = iface->bss[0];
337 unsigned int i = iface->conf->num_bss, bits = 0, j;
341 if (hostapd_drv_none(hapd))
344 /* Generate BSSID mask that is large enough to cover the BSSIDs. */
346 /* Determine the bits necessary to cover the number of BSSIDs. */
347 for (i--; i; i >>= 1)
350 /* Determine the bits necessary to any configured BSSIDs,
351 if they are higher than the number of BSSIDs. */
352 for (j = 0; j < iface->conf->num_bss; j++) {
353 if (hostapd_mac_comp_empty(iface->conf->bss[j].bssid) == 0) {
359 for (i = 0; i < ETH_ALEN; i++) {
361 iface->conf->bss[j].bssid[i] ^
369 for (i = 0; i < ETH_ALEN && mask[i] == 0; i++)
375 while (mask[i] != 0) {
385 wpa_printf(MSG_ERROR, "Too many bits in the BSSID mask (%u)",
390 os_memset(mask, 0xff, ETH_ALEN);
392 for (i = 5; i > 5 - j; i--)
399 wpa_printf(MSG_DEBUG, "BSS count %lu, BSSID mask " MACSTR " (%d bits)",
400 (unsigned long) iface->conf->num_bss, MAC2STR(mask), bits);
402 res = hostapd_valid_bss_mask(hapd, hapd->own_addr, mask);
407 wpa_printf(MSG_ERROR, "Driver did not accept BSSID mask "
408 MACSTR " for start address " MACSTR ".",
409 MAC2STR(mask), MAC2STR(hapd->own_addr));
416 for (i = 0; i < ETH_ALEN; i++) {
417 if ((hapd->own_addr[i] & mask[i]) != hapd->own_addr[i]) {
418 wpa_printf(MSG_ERROR, "Invalid BSSID mask " MACSTR
419 " for start address " MACSTR ".",
420 MAC2STR(mask), MAC2STR(hapd->own_addr));
421 wpa_printf(MSG_ERROR, "Start address must be the "
422 "first address in the block (i.e., addr "
423 "AND mask == addr).");
432 static int mac_in_conf(struct hostapd_config *conf, const void *a)
436 for (i = 0; i < conf->num_bss; i++) {
437 if (hostapd_mac_comp(conf->bss[i].bssid, a) == 0) {
449 * hostapd_setup_bss - Per-BSS setup (initialization)
450 * @hapd: Pointer to BSS data
451 * @first: Whether this BSS is the first BSS of an interface
453 * This function is used to initialize all per-BSS data structures and
454 * resources. This gets called in a loop for each BSS when an interface is
455 * initialized. Most of the modules that are initialized here will be
456 * deinitialized in hostapd_cleanup().
458 static int hostapd_setup_bss(struct hostapd_data *hapd, int first)
460 struct hostapd_bss_config *conf = hapd->conf;
461 u8 ssid[HOSTAPD_MAX_SSID_LEN + 1];
462 int ssid_len, set_ssid;
465 if (hostapd_mac_comp_empty(hapd->conf->bssid) == 0) {
466 /* Allocate the next available BSSID. */
468 inc_byte_array(hapd->own_addr, ETH_ALEN);
469 } while (mac_in_conf(hapd->iconf, hapd->own_addr));
471 /* Allocate the configured BSSID. */
472 os_memcpy(hapd->own_addr, hapd->conf->bssid, ETH_ALEN);
474 if (hostapd_mac_comp(hapd->own_addr,
475 hapd->iface->bss[0]->own_addr) ==
477 wpa_printf(MSG_ERROR, "BSS '%s' may not have "
478 "BSSID set to the MAC address of "
479 "the radio", hapd->conf->iface);
484 hapd->interface_added = 1;
485 if (hostapd_if_add(hapd->iface->bss[0], WPA_IF_AP_BSS,
486 hapd->conf->iface, hapd->own_addr, hapd)) {
487 wpa_printf(MSG_ERROR, "Failed to add BSS (BSSID="
488 MACSTR ")", MAC2STR(hapd->own_addr));
493 hostapd_flush_old_stations(hapd);
494 hostapd_set_privacy(hapd, 0);
496 hostapd_broadcast_wep_clear(hapd);
497 if (hostapd_setup_encryption(hapd->conf->iface, hapd))
501 * Fetch the SSID from the system and use it or,
502 * if one was specified in the config file, verify they
505 ssid_len = hostapd_get_ssid(hapd, ssid, sizeof(ssid));
507 wpa_printf(MSG_ERROR, "Could not read SSID from system");
510 if (conf->ssid.ssid_set) {
512 * If SSID is specified in the config file and it differs
513 * from what is being used then force installation of the
516 set_ssid = (conf->ssid.ssid_len != (size_t) ssid_len ||
517 os_memcmp(conf->ssid.ssid, ssid, ssid_len) != 0);
520 * No SSID in the config file; just use the one we got
524 conf->ssid.ssid_len = ssid_len;
525 os_memcpy(conf->ssid.ssid, ssid, conf->ssid.ssid_len);
526 conf->ssid.ssid[conf->ssid.ssid_len] = '\0';
529 if (!hostapd_drv_none(hapd)) {
530 wpa_printf(MSG_ERROR, "Using interface %s with hwaddr " MACSTR
532 hapd->conf->iface, MAC2STR(hapd->own_addr),
533 hapd->conf->ssid.ssid);
536 if (hostapd_setup_wpa_psk(conf)) {
537 wpa_printf(MSG_ERROR, "WPA-PSK setup failed.");
541 /* Set SSID for the kernel driver (to be used in beacon and probe
542 * response frames) */
543 if (set_ssid && hostapd_set_ssid(hapd, (u8 *) conf->ssid.ssid,
544 conf->ssid.ssid_len)) {
545 wpa_printf(MSG_ERROR, "Could not set SSID for kernel driver");
549 if (wpa_debug_level == MSG_MSGDUMP)
550 conf->radius->msg_dumps = 1;
551 #ifndef CONFIG_NO_RADIUS
552 hapd->radius = radius_client_init(hapd, conf->radius);
553 if (hapd->radius == NULL) {
554 wpa_printf(MSG_ERROR, "RADIUS client initialization failed.");
557 #endif /* CONFIG_NO_RADIUS */
559 if (hostapd_acl_init(hapd)) {
560 wpa_printf(MSG_ERROR, "ACL initialization failed.");
563 if (hostapd_init_wps(hapd, conf))
566 if (ieee802_1x_init(hapd)) {
567 wpa_printf(MSG_ERROR, "IEEE 802.1X initialization failed.");
571 if (hapd->conf->wpa && hostapd_setup_wpa(hapd))
574 if (accounting_init(hapd)) {
575 wpa_printf(MSG_ERROR, "Accounting initialization failed.");
579 if (hapd->conf->ieee802_11f &&
580 (hapd->iapp = iapp_init(hapd, hapd->conf->iapp_iface)) == NULL) {
581 wpa_printf(MSG_ERROR, "IEEE 802.11F (IAPP) initialization "
586 if (hapd->iface->ctrl_iface_init &&
587 hapd->iface->ctrl_iface_init(hapd)) {
588 wpa_printf(MSG_ERROR, "Failed to setup control interface");
592 if (!hostapd_drv_none(hapd) && vlan_init(hapd)) {
593 wpa_printf(MSG_ERROR, "VLAN initialization failed.");
597 ieee802_11_set_beacon(hapd);
599 if (authsrv_init(hapd) < 0)
606 static void hostapd_tx_queue_params(struct hostapd_iface *iface)
608 struct hostapd_data *hapd = iface->bss[0];
610 struct hostapd_tx_queue_params *p;
612 for (i = 0; i < NUM_TX_QUEUES; i++) {
613 p = &iface->conf->tx_queue[i];
618 if (hostapd_set_tx_queue_params(hapd, i, p->aifs, p->cwmin,
619 p->cwmax, p->burst)) {
620 wpa_printf(MSG_DEBUG, "Failed to set TX queue "
621 "parameters for queue %d.", i);
622 /* Continue anyway */
628 static int setup_interface(struct hostapd_iface *iface)
630 struct hostapd_data *hapd = iface->bss[0];
635 * Make sure that all BSSes get configured with a pointer to the same
638 for (i = 1; i < iface->num_bss; i++) {
639 iface->bss[i]->driver = hapd->driver;
640 iface->bss[i]->drv_priv = hapd->drv_priv;
643 if (hostapd_validate_bssid_configuration(iface))
646 if (hapd->iconf->country[0] && hapd->iconf->country[1]) {
647 os_memcpy(country, hapd->iconf->country, 3);
649 if (hostapd_set_country(hapd, country) < 0) {
650 wpa_printf(MSG_ERROR, "Failed to set country code");
655 if (hostapd_get_hw_features(iface)) {
656 /* Not all drivers support this yet, so continue without hw
659 int ret = hostapd_select_hw_mode(iface);
661 wpa_printf(MSG_ERROR, "Could not select hw_mode and "
662 "channel. (%d)", ret);
665 ret = hostapd_check_ht_capab(iface);
669 wpa_printf(MSG_DEBUG, "Interface initialization will "
670 "be completed in a callback");
674 return hostapd_setup_interface_complete(iface, 0);
678 int hostapd_setup_interface_complete(struct hostapd_iface *iface, int err)
680 struct hostapd_data *hapd = iface->bss[0];
686 wpa_printf(MSG_ERROR, "Interface initialization failed");
691 wpa_printf(MSG_DEBUG, "Completing interface initialization");
692 if (hapd->iconf->channel) {
693 freq = hostapd_hw_get_freq(hapd, hapd->iconf->channel);
694 wpa_printf(MSG_DEBUG, "Mode: %s Channel: %d "
696 hostapd_hw_mode_txt(hapd->iconf->hw_mode),
697 hapd->iconf->channel, freq);
699 if (hostapd_set_freq(hapd, hapd->iconf->hw_mode, freq,
700 hapd->iconf->channel,
701 hapd->iconf->ieee80211n,
702 hapd->iconf->secondary_channel)) {
703 wpa_printf(MSG_ERROR, "Could not set channel for "
709 if (hapd->iconf->rts_threshold > -1 &&
710 hostapd_set_rts(hapd, hapd->iconf->rts_threshold)) {
711 wpa_printf(MSG_ERROR, "Could not set RTS threshold for "
716 if (hapd->iconf->fragm_threshold > -1 &&
717 hostapd_set_frag(hapd, hapd->iconf->fragm_threshold)) {
718 wpa_printf(MSG_ERROR, "Could not set fragmentation threshold "
719 "for kernel driver");
723 prev_addr = hapd->own_addr;
725 for (j = 0; j < iface->num_bss; j++) {
726 hapd = iface->bss[j];
728 os_memcpy(hapd->own_addr, prev_addr, ETH_ALEN);
729 if (hostapd_setup_bss(hapd, j == 0))
731 if (hostapd_mac_comp_empty(hapd->conf->bssid) == 0)
732 prev_addr = hapd->own_addr;
735 hostapd_tx_queue_params(iface);
739 if (hostapd_driver_commit(hapd) < 0) {
740 wpa_printf(MSG_ERROR, "%s: Failed to commit driver "
741 "configuration", __func__);
745 wpa_printf(MSG_DEBUG, "%s: Setup of interface done.",
746 iface->bss[0]->conf->iface);
753 * hostapd_setup_interface - Setup of an interface
754 * @iface: Pointer to interface data.
755 * Returns: 0 on success, -1 on failure
757 * Initializes the driver interface, validates the configuration,
758 * and sets driver parameters based on the configuration.
759 * Flushes old stations, sets the channel, encryption,
760 * beacons, and WDS links based on the configuration.
762 int hostapd_setup_interface(struct hostapd_iface *iface)
766 ret = setup_interface(iface);
768 wpa_printf(MSG_ERROR, "%s: Unable to setup interface.",
769 iface->bss[0]->conf->iface);
778 * hostapd_alloc_bss_data - Allocate and initialize per-BSS data
779 * @hapd_iface: Pointer to interface data
780 * @conf: Pointer to per-interface configuration
781 * @bss: Pointer to per-BSS configuration for this BSS
782 * Returns: Pointer to allocated BSS data
784 * This function is used to allocate per-BSS data structure. This data will be
785 * freed after hostapd_cleanup() is called for it during interface
788 struct hostapd_data *
789 hostapd_alloc_bss_data(struct hostapd_iface *hapd_iface,
790 struct hostapd_config *conf,
791 struct hostapd_bss_config *bss)
793 struct hostapd_data *hapd;
795 hapd = os_zalloc(sizeof(*hapd));
799 hostapd_set_driver_ops(&hapd->drv);
800 hapd->new_assoc_sta_cb = hostapd_new_assoc_sta;
803 hapd->iface = hapd_iface;
804 hapd->driver = hapd->iconf->driver;
810 void hostapd_interface_deinit(struct hostapd_iface *iface)
817 hostapd_cleanup_iface_pre(iface);
818 for (j = 0; j < iface->num_bss; j++) {
819 struct hostapd_data *hapd = iface->bss[j];
820 hostapd_free_stas(hapd);
821 hostapd_flush_old_stations(hapd);
822 hostapd_cleanup(hapd);
824 for (j = 0; j < iface->num_bss; j++)
825 os_free(iface->bss[j]);
826 hostapd_cleanup_iface(iface);
831 * hostapd_new_assoc_sta - Notify that a new station associated with the AP
832 * @hapd: Pointer to BSS data
833 * @sta: Pointer to the associated STA data
834 * @reassoc: 1 to indicate this was a re-association; 0 = first association
836 * This function will be called whenever a station associates with the AP. It
837 * can be called from ieee802_11.c for drivers that export MLME to hostapd and
838 * from drv_callbacks.c based on driver events for drivers that take care of
839 * management frames (IEEE 802.11 authentication and association) internally.
841 void hostapd_new_assoc_sta(struct hostapd_data *hapd, struct sta_info *sta,
844 if (hapd->tkip_countermeasures) {
845 hapd->drv.sta_deauth(hapd, sta->addr,
846 WLAN_REASON_MICHAEL_MIC_FAILURE);
850 hostapd_prune_associations(hapd, sta->addr);
852 /* IEEE 802.11F (IAPP) */
853 if (hapd->conf->ieee802_11f)
854 iapp_new_station(hapd->iapp, sta);
856 /* Start accounting here, if IEEE 802.1X and WPA are not used.
857 * IEEE 802.1X/WPA code will start accounting after the station has
858 * been authorized. */
859 if (!hapd->conf->ieee802_1x && !hapd->conf->wpa)
860 accounting_sta_start(hapd, sta);
862 /* Start IEEE 802.1X authentication process for new stations */
863 ieee802_1x_new_station(hapd, sta);
865 if (sta->auth_alg != WLAN_AUTH_FT &&
866 !(sta->flags & (WLAN_STA_WPS | WLAN_STA_MAYBE_WPS)))
867 wpa_auth_sm_event(sta->wpa_sm, WPA_REAUTH);
869 wpa_auth_sta_associated(hapd->wpa_auth, sta->wpa_sm);